[PATCH 0/4] media: wave5: fix runtime PM error handling

[PATCH 0/4] media: wave5: fix runtime PM error handling

[Jiale Yao]

The Wave5 decoder, encoder, and close paths assume that
pm_runtime_resume_and_get() always succeeds. Runtime resume can fail while
enabling the VPU clocks, after which firmware commands can access unavailable
registers and cleanup paths can drop references that were not acquired.

The encoder close path also calls pm_runtime_resume_and_get() instead of
pm_runtime_put_sync() on three errors, leaking an additional reference on
each failure.

Check runtime resume results before hardware access, preserve the required
buffer and job cleanup in callbacks that cannot return errors, and correct
the encoder close error-path reference handling.

Jiale Yao (4):
  media: wave5: handle decoder runtime resume failures
  media: wave5: handle encoder runtime resume failures
  media: wave5: handle runtime resume failure when closing
  media: wave5: release runtime PM reference on encoder close errors

 .../chips-media/wave5/wave5-vpu-dec.c         | 55 +++++++++++++++++--
 .../chips-media/wave5/wave5-vpu-enc.c         | 25 ++++++++-
 .../platform/chips-media/wave5/wave5-vpuapi.c | 14 +++--
 3 files changed, 80 insertions(+), 14 deletions(-)

-- 
2.34.1

[PATCH 1/4] media: wave5: handle decoder runtime resume failures

[Jiale Yao]

Several decoder callbacks continue into firmware commands after
pm_runtime_resume_and_get() fails. The runtime resume callback can fail
while enabling the VPU clocks, so those commands may access registers
while the device is unavailable. The matching runtime PM puts can also
be issued without a reference.

Check each resume result. Propagate errors from callbacks that can
return them, complete buffers or jobs from void callbacks, and avoid
firmware access and unmatched puts on failure.

Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
Fixes: cbb9c0d50e47 ("media: chips-media: wave5: Fix SError of kernel panic when closed")
Fixes: a52e6f7923c1 ("media: chips-media: wave5: Resume device before setting EOS flag")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
---
 .../chips-media/wave5/wave5-vpu-dec.c         | 55 +++++++++++++++++--
 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
index 6564cf3ec739..467c68931e8d 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
@@ -829,7 +829,10 @@ static int wave5_vpu_dec_stop(struct vpu_instance *inst)
 		 * accesses VPU registers via send_firmware_command(), so the
 		 * device must be resumed first to avoid an asynchronous SError.
 		 */
-		pm_runtime_resume_and_get(inst->dev->dev);
+		ret = pm_runtime_resume_and_get(inst->dev->dev);
+		if (ret < 0)
+			return ret;
+
 		ret = wave5_vpu_dec_set_eos_on_firmware(inst);
 		pm_runtime_put_autosuspend(inst->dev->dev);
 		if (ret)
@@ -1302,8 +1305,14 @@ static void wave5_vpu_dec_buf_queue_dst(struct vb2_buffer *vb)
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct vpu_instance *inst = vb2_get_drv_priv(vb->vb2_queue);
 	struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
+		return;
+	}
 
-	pm_runtime_resume_and_get(inst->dev->dev);
 	vbuf->sequence = inst->queued_dst_buf_num++;
 
 	if (inst->state == VPU_INST_STATE_PIC_RUN) {
@@ -1386,7 +1395,11 @@ static int wave5_vpu_dec_start_streaming(struct vb2_queue *q, unsigned int count
 	int ret = 0;
 
 	dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		wave5_return_bufs(q, VB2_BUF_STATE_QUEUED);
+		return ret;
+	}
 
 	v4l2_m2m_update_start_streaming_state(m2m_ctx, q);
 
@@ -1550,9 +1563,28 @@ static void wave5_vpu_dec_stop_streaming(struct vb2_queue *q)
 	struct vpu_instance *inst = vb2_get_drv_priv(q);
 	struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
 	unsigned long timeout;
+	int ret;
 
 	dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+			struct vpu_src_buffer *vpu_buf;
+
+			inst->retry = false;
+			inst->queuing_num = 0;
+			while ((vpu_buf = inst_src_buf_remove(inst)) != NULL)
+				;
+			inst->eos = false;
+		}
+
+		v4l2_m2m_update_stop_streaming_state(m2m_ctx, q);
+		wave5_return_bufs(q, VB2_BUF_STATE_ERROR);
+		inst->empty_queue = false;
+		inst->sent_eos = false;
+		return;
+	}
+
 	inst->empty_queue = true;
 
 	timeout = jiffies + msecs_to_jiffies(VPU_DEC_STOP_TIMEOUT);
@@ -1669,7 +1701,13 @@ static void wave5_vpu_dec_device_run(void *priv)
 	bool cmd_issued = false;
 
 	dev_dbg(inst->dev->dev, "%s: Fill the ring buffer with new bitstream data", __func__);
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		dev_err(inst->dev->dev, "Failed to resume VPU: %d\n", ret);
+		v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
+		return;
+	}
+
 	if (!inst->retry) {
 		ret = fill_ringbuffer(inst);
 		if (ret < 0) {
@@ -1812,7 +1850,11 @@ static void wave5_vpu_dec_job_abort(void *priv)
 	 * device must be resumed first; otherwise the register access faults
 	 * with an asynchronous SError.
 	 */
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		dev_warn(inst->dev->dev, "Failed to resume VPU: %d\n", ret);
+		goto finish_job;
+	}
 
 	ret = wave5_vpu_dec_set_eos_on_firmware(inst);
 	if (ret)
@@ -1821,6 +1863,7 @@ static void wave5_vpu_dec_job_abort(void *priv)
 
 	pm_runtime_put_autosuspend(inst->dev->dev);
 
+finish_job:
 	v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
 }
 
-- 
2.34.1

Re: [PATCH 1/4] media: wave5: handle decoder runtime resume failures

[Brandon Brnich]

Hi Jiale,

Thanks for the patch.

On 10/3/26 03:08, Jiale Yao wrote:
> Several decoder callbacks continue into firmware commands after
> pm_runtime_resume_and_get() fails. The runtime resume callback can fail
> while enabling the VPU clocks, so those commands may access registers
> while the device is unavailable. The matching runtime PM puts can also
> be issued without a reference.
> 
> Check each resume result. Propagate errors from callbacks that can
> return them, complete buffers or jobs from void callbacks, and avoid
> firmware access and unmatched puts on failure.
> 
> Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
> Fixes: cbb9c0d50e47 ("media: chips-media: wave5: Fix SError of kernel panic when closed")
> Fixes: a52e6f7923c1 ("media: chips-media: wave5: Resume device before setting EOS flag")
> Signed-off-by: Jiale Yao <yaojiale02@163.com>
> ---
>   .../chips-media/wave5/wave5-vpu-dec.c         | 55 +++++++++++++++++--
>   1 file changed, 49 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> index 6564cf3ec739..467c68931e8d 100644
> --- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> +++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> @@ -829,7 +829,10 @@ static int wave5_vpu_dec_stop(struct vpu_instance *inst)
>   		 * accesses VPU registers via send_firmware_command(), so the
>   		 * device must be resumed first to avoid an asynchronous SError.
>   		 */
> -		pm_runtime_resume_and_get(inst->dev->dev);
> +		ret = pm_runtime_resume_and_get(inst->dev->dev);
> +		if (ret < 0)
> +			return ret;
> +
>   		ret = wave5_vpu_dec_set_eos_on_firmware(inst);
>   		pm_runtime_put_autosuspend(inst->dev->dev);
>   		if (ret)
> @@ -1302,8 +1305,14 @@ static void wave5_vpu_dec_buf_queue_dst(struct vb2_buffer *vb)
>   	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>   	struct vpu_instance *inst = vb2_get_drv_priv(vb->vb2_queue);
>   	struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(inst->dev->dev);
> +	if (ret < 0) {
> +		v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> +		return;
> +	}

Above was addressed here[0]. However, linked patch uses vb2_buffer_done 
which seems incorrect to me. You are using v4l2_m2m_buf_done which is 
proper call for an m2m driver. You should rebase this series on 
media-next and you can add another patch to fix improper call currently 
in upstream driver here.

Best,
Brandon

[0]: 
https://patchwork.linuxtv.org/project/linux-media/patch/20260718130037.3306626-2-lgs201920130244@gmail.com/

>   
> -	pm_runtime_resume_and_get(inst->dev->dev);
>   	vbuf->sequence = inst->queued_dst_buf_num++;
>   
>   	if (inst->state == VPU_INST_STATE_PIC_RUN) {
> @@ -1386,7 +1395,11 @@ static int wave5_vpu_dec_start_streaming(struct vb2_queue *q, unsigned int count
>   	int ret = 0;
>   
>   	dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
> -	pm_runtime_resume_and_get(inst->dev->dev);
> +	ret = pm_runtime_resume_and_get(inst->dev->dev);
> +	if (ret < 0) {
> +		wave5_return_bufs(q, VB2_BUF_STATE_QUEUED);
> +		return ret;
> +	}
>   
>   	v4l2_m2m_update_start_streaming_state(m2m_ctx, q);
>   
> @@ -1550,9 +1563,28 @@ static void wave5_vpu_dec_stop_streaming(struct vb2_queue *q)
>   	struct vpu_instance *inst = vb2_get_drv_priv(q);
>   	struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
>   	unsigned long timeout;
> +	int ret;
>   
>   	dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
> -	pm_runtime_resume_and_get(inst->dev->dev);
> +	ret = pm_runtime_resume_and_get(inst->dev->dev);
> +	if (ret < 0) {
> +		if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> +			struct vpu_src_buffer *vpu_buf;
> +
> +			inst->retry = false;
> +			inst->queuing_num = 0;
> +			while ((vpu_buf = inst_src_buf_remove(inst)) != NULL)
> +				;
> +			inst->eos = false;
> +		}
> +
> +		v4l2_m2m_update_stop_streaming_state(m2m_ctx, q);
> +		wave5_return_bufs(q, VB2_BUF_STATE_ERROR);
> +		inst->empty_queue = false;
> +		inst->sent_eos = false;
> +		return;
> +	}
> +
>   	inst->empty_queue = true;
>   
>   	timeout = jiffies + msecs_to_jiffies(VPU_DEC_STOP_TIMEOUT);
> @@ -1669,7 +1701,13 @@ static void wave5_vpu_dec_device_run(void *priv)
>   	bool cmd_issued = false;
>   
>   	dev_dbg(inst->dev->dev, "%s: Fill the ring buffer with new bitstream data", __func__);
> -	pm_runtime_resume_and_get(inst->dev->dev);
> +	ret = pm_runtime_resume_and_get(inst->dev->dev);
> +	if (ret < 0) {
> +		dev_err(inst->dev->dev, "Failed to resume VPU: %d\n", ret);
> +		v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
> +		return;
> +	}
> +
>   	if (!inst->retry) {
>   		ret = fill_ringbuffer(inst);
>   		if (ret < 0) {
> @@ -1812,7 +1850,11 @@ static void wave5_vpu_dec_job_abort(void *priv)
>   	 * device must be resumed first; otherwise the register access faults
>   	 * with an asynchronous SError.
>   	 */
> -	pm_runtime_resume_and_get(inst->dev->dev);
> +	ret = pm_runtime_resume_and_get(inst->dev->dev);
> +	if (ret < 0) {
> +		dev_warn(inst->dev->dev, "Failed to resume VPU: %d\n", ret);
> +		goto finish_job;
> +	}
>   
>   	ret = wave5_vpu_dec_set_eos_on_firmware(inst);
>   	if (ret)
> @@ -1821,6 +1863,7 @@ static void wave5_vpu_dec_job_abort(void *priv)
>   
>   	pm_runtime_put_autosuspend(inst->dev->dev);
>   
> +finish_job:
>   	v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
>   }
>   

[PATCH 2/4] media: wave5: handle encoder runtime resume failures

[Jiale Yao]

The encoder callbacks ignore failures from pm_runtime_resume_and_get()
and continue issuing firmware commands. Runtime resume can fail while
enabling the VPU clocks, leaving the registers inaccessible. The
callbacks then also drop a runtime PM reference that was not acquired.

Check each resume result. Propagate the error from start_streaming(),
and return queued buffers or finish the job from void callbacks without
accessing the hardware or issuing an unmatched put.

Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
---
 .../chips-media/wave5/wave5-vpu-enc.c         | 25 ++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
index f9fcdf4c224b..5a5ee70cd854 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
@@ -1351,7 +1351,12 @@ static int wave5_vpu_enc_start_streaming(struct vb2_queue *q, unsigned int count
 	struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
 	int ret = 0;
 
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		wave5_return_bufs(q, VB2_BUF_STATE_QUEUED);
+		return ret;
+	}
+
 	v4l2_m2m_update_start_streaming_state(m2m_ctx, q);
 
 	if (inst->state == VPU_INST_STATE_NONE && q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
@@ -1451,6 +1456,7 @@ static void wave5_vpu_enc_stop_streaming(struct vb2_queue *q)
 {
 	struct vpu_instance *inst = vb2_get_drv_priv(q);
 	bool check_cmd = true;
+	int ret;
 
 	/*
 	 * Note that we don't need m2m_ctx->next_buf_last for this driver, so we
@@ -1458,7 +1464,14 @@ static void wave5_vpu_enc_stop_streaming(struct vb2_queue *q)
 	 */
 
 	dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+			streamoff_output(inst, q);
+		else
+			streamoff_capture(inst, q);
+		return;
+	}
 
 	if (wave5_vpu_both_queues_are_streaming(inst))
 		switch_state(inst, VPU_INST_STATE_STOP);
@@ -1526,7 +1539,13 @@ static void wave5_vpu_enc_device_run(void *priv)
 	u32 fail_res = 0;
 	int ret = 0;
 
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0) {
+		dev_err(inst->dev->dev, "Failed to resume VPU: %d\n", ret);
+		v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
+		return;
+	}
+
 	switch (inst->state) {
 	case VPU_INST_STATE_PIC_RUN:
 		ret = start_encode(inst, &fail_res);
-- 
2.34.1

[PATCH 3/4] media: wave5: handle runtime resume failure when closing

[Jiale Yao]

The decoder and encoder close paths ignore runtime resume failures and
proceed to firmware commands. If enabling the VPU clocks failed, those
commands access unavailable registers, and the paths later drop a
runtime PM reference that was not acquired.

Return the resume error before taking the hardware lock or issuing
firmware commands.

Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
---
 drivers/media/platform/chips-media/wave5/wave5-vpuapi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
index f77abd5e122a..42bc737c6980 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
@@ -220,7 +220,9 @@ int wave5_vpu_dec_close(struct vpu_instance *inst, u32 *fail_res)
 	if (!inst->codec_info)
 		return -EINVAL;
 
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0)
+		return ret;
 
 	ret_mutex = mutex_lock_interruptible(&vpu_dev->hw_lock);
 	if (ret_mutex) {
@@ -750,7 +752,9 @@ int wave5_vpu_enc_close(struct vpu_instance *inst, u32 *fail_res)
 	if (!inst->codec_info)
 		return -EINVAL;
 
-	pm_runtime_resume_and_get(inst->dev->dev);
+	ret = pm_runtime_resume_and_get(inst->dev->dev);
+	if (ret < 0)
+		return ret;
 
 	ret = mutex_lock_interruptible(&vpu_dev->hw_lock);
 	if (ret) {
-- 
2.34.1

[PATCH 4/4] media: wave5: release runtime PM reference on encoder close errors

[Jiale Yao]

wave5_vpu_enc_close() acquires a runtime PM reference before taking the
hardware lock, but three error paths call pm_runtime_resume_and_get()
again instead of releasing that reference. Each failure therefore
increments the usage count and can prevent the VPU from suspending.

Use pm_runtime_put_sync() on the error paths, matching the successful
path and the decoder close implementation.

Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
---
 drivers/media/platform/chips-media/wave5/wave5-vpuapi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
index 42bc737c6980..062f0b5c318b 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
@@ -758,7 +758,7 @@ int wave5_vpu_enc_close(struct vpu_instance *inst, u32 *fail_res)
 
 	ret = mutex_lock_interruptible(&vpu_dev->hw_lock);
 	if (ret) {
-		pm_runtime_resume_and_get(inst->dev->dev);
+		pm_runtime_put_sync(inst->dev->dev);
 		return ret;
 	}
 
@@ -766,14 +766,14 @@ int wave5_vpu_enc_close(struct vpu_instance *inst, u32 *fail_res)
 		ret = wave5_vpu_enc_finish_seq(inst, fail_res);
 		if (ret < 0 && *fail_res != WAVE5_SYSERR_VPU_STILL_RUNNING) {
 			dev_warn(inst->dev->dev, "enc_finish_seq timed out\n");
-			pm_runtime_resume_and_get(inst->dev->dev);
+			pm_runtime_put_sync(inst->dev->dev);
 			mutex_unlock(&vpu_dev->hw_lock);
 			return ret;
 		}
 
 		if (*fail_res == WAVE5_SYSERR_VPU_STILL_RUNNING &&
 		    retry++ >= MAX_FIRMWARE_CALL_RETRY) {
-			pm_runtime_resume_and_get(inst->dev->dev);
+			pm_runtime_put_sync(inst->dev->dev);
 			mutex_unlock(&vpu_dev->hw_lock);
 			return -ETIMEDOUT;
 		}
-- 
2.34.1

Re: [PATCH 4/4] media: wave5: release runtime PM reference on encoder close errors

[Brandon Brnich]

Hi Jiale,

Thanks for the patch.

On 10/3/26 03:08, Jiale Yao wrote:
> wave5_vpu_enc_close() acquires a runtime PM reference before taking the
> hardware lock, but three error paths call pm_runtime_resume_and_get()
> again instead of releasing that reference. Each failure therefore
> increments the usage count and can prevent the VPU from suspending.
> 
> Use pm_runtime_put_sync() on the error paths, matching the successful
> path and the decoder close implementation.
These issues have already been addressed and are accepted[0].

Best,
Brandon

[0]: 
https://patchwork.linuxtv.org/project/linux-media/patch/20260717075714.1508938-1-lilinmao@kylinos.cn/

> 
> Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
> Signed-off-by: Jiale Yao <yaojiale02@163.com>
> ---
>   drivers/media/platform/chips-media/wave5/wave5-vpuapi.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> index 42bc737c6980..062f0b5c318b 100644
> --- a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> +++ b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> @@ -758,7 +758,7 @@ int wave5_vpu_enc_close(struct vpu_instance *inst, u32 *fail_res)
>   
>   	ret = mutex_lock_interruptible(&vpu_dev->hw_lock);
>   	if (ret) {
> -		pm_runtime_resume_and_get(inst->dev->dev);
> +		pm_runtime_put_sync(inst->dev->dev);
>   		return ret;
>   	}
>   
> @@ -766,14 +766,14 @@ int wave5_vpu_enc_close(struct vpu_instance *inst, u32 *fail_res)
>   		ret = wave5_vpu_enc_finish_seq(inst, fail_res);
>   		if (ret < 0 && *fail_res != WAVE5_SYSERR_VPU_STILL_RUNNING) {
>   			dev_warn(inst->dev->dev, "enc_finish_seq timed out\n");
> -			pm_runtime_resume_and_get(inst->dev->dev);
> +			pm_runtime_put_sync(inst->dev->dev);
>   			mutex_unlock(&vpu_dev->hw_lock);
>   			return ret;
>   		}
>   
>   		if (*fail_res == WAVE5_SYSERR_VPU_STILL_RUNNING &&
>   		    retry++ >= MAX_FIRMWARE_CALL_RETRY) {
> -			pm_runtime_resume_and_get(inst->dev->dev);
> +			pm_runtime_put_sync(inst->dev->dev);
>   			mutex_unlock(&vpu_dev->hw_lock);
>   			return -ETIMEDOUT;
>   		}