From: Chao Yu <chao@kernel.org>
To: Nanzhe Zhao <nzzhao.sigma@gmail.com>
Cc: chao@kernel.org, linux-f2fs-devel@lists.sourceforge.net,
Barry Song <baohua@kernel.org>, Juan Yescas <jyescas@google.com>,
Pengfei Li <lipengfei28@xiaomi.com>, Dev Jain <Dev.Jain@arm.com>,
linux-kernel@vger.kernel.org,
David Hildenbrand <David.Hildenbrand@arm.com>,
Bo Zhang <zhangbo56@xiaomi.com>,
Kalesh Singh <kaleshsingh@google.com>,
Jaegeuk Kim <jaegeuk@kernel.org>,
Ryan Roberts <Ryan.Roberts@arm.com>
Subject: Re: [f2fs-dev] [PATCH 12/14] f2fs: handle block cloning within the same large folio
Date: Mon, 7 Sep 2026 18:24:32 +0800 [thread overview]
Message-ID: <f9839ca2-1554-450d-9e98-72d686a8402d@kernel.org> (raw)
In-Reply-To: <20260907095759.2461366-1-zhaonanzhe@xiaomi.com>
Thanks, better.
On 9/7/26 17:57, Nanzhe Zhao wrote:
> On Mon, 31 Aug 2026 16:19:05 +0800, Chao Yu wrote:
>> A lot of codes are redundant, can we add fdst = fsrc;
>> So that we can replace fsrc w/ fdst, and clean up the redundant codes
>> below:
>> Thanks,
>
> Thanks for the review. I'll restructure the else branch as suggested:
>
> --- a/fs/f2fs/file.c
> +++ b/fs/f2fs/file.c
> @@ -56,25 +56,66 @@
> f2fs_put_dnode(&dn);
> } else {
> struct folio *fsrc, *fdst;
> + size_t src_off, dst_off;
> + bool same_folio;
>
> fsrc = f2fs_get_lock_data_folio(src_inode,
> src + i, true);
> if (IS_ERR(fsrc))
> return PTR_ERR(fsrc);
> - fdst = f2fs_get_new_data_folio(dst_inode, NULL, dst + i,
> - true);
> - if (IS_ERR(fdst)) {
> - f2fs_folio_put(fsrc, true);
> - return PTR_ERR(fdst);
> +
> + src_off = offset_in_folio(fsrc,
> + (loff_t)(src + i) << PAGE_SHIFT);
> +
> + /*
> + * For same-inode operations (collapse/insert), src and
> + * dst may fall within the same large folio. Detect this
> + * to avoid self-deadlock on folio lock: in that case the
> + * destination folio is fsrc itself and only its block
> + * needs reservation.
> + */
> + same_folio = src_inode == dst_inode &&
> + folio_contains(fsrc, dst + i);
> + if (same_folio) {
> + struct dnode_of_data dn;
> +
> + /* Reserve block for dst before copying */
> + set_new_dnode(&dn, dst_inode, NULL, NULL, 0);
> + ret = f2fs_reserve_block(&dn, dst + i);
> + if (ret) {
> + f2fs_folio_put(fsrc, true);
> + return ret;
> + }
> + fdst = fsrc;
> + } else {
> + fdst = f2fs_get_new_data_folio(dst_inode, NULL,
> + dst + i, true);
> + if (IS_ERR(fdst)) {
> + f2fs_folio_put(fsrc, true);
> + return PTR_ERR(fdst);
> + }
> }
>
> + dst_off = offset_in_folio(fdst,
> + (loff_t)(dst + i) << PAGE_SHIFT);
> f2fs_folio_wait_writeback(fdst, DATA, true, true);
> -
> - memcpy_folio(fdst, 0, fsrc, 0, PAGE_SIZE);
> + memcpy_folio(fdst, dst_off, fsrc, src_off, PAGE_SIZE);
> + if (folio_test_large(fdst)) {
> + f2fs_ffs_find_or_alloc(fdst);
> + f2fs_ffs_mark_subrange_uptodate(fdst,
> + dst_off, PAGE_SIZE);
> + f2fs_ffs_mark_subrange_dirty(fdst, dst_off,
> + PAGE_SIZE);
> + }
> folio_mark_dirty(fdst);
> + if (same_folio && i_size_read(dst_inode) <
> + ((loff_t)(dst + i + 1) << PAGE_SHIFT))
> + f2fs_i_size_write(dst_inode,
> + ((loff_t)(dst + i + 1) << PAGE_SHIFT));
> folio_set_f2fs_gcing(fdst);
> f2fs_folio_put(fdst, true);
> - f2fs_folio_put(fsrc, true);
> + if (!same_folio)
> + f2fs_folio_put(fsrc, true);
>
> ret = f2fs_truncate_hole(src_inode,
> src + i, src + i + 1);
>
> Thanks,
> Nanzhe
next prev parent reply other threads:[~2026-09-07 10:24 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-26 8:26 [PATCH 00/14] f2fs: support & optimize large folios for writable files Nanzhe Zhao
2026-08-26 8:26 ` [PATCH 01/14] f2fs: extend folio state for large folio write path Nanzhe Zhao
2026-08-27 6:57 ` Chao Yu
2026-08-27 20:51 ` [f2fs-dev] " Daeho Jeong
2026-09-04 3:44 ` Daeho Jeong
2026-09-07 6:49 ` Nanzhe Zhao
2026-09-07 9:31 ` Nanzhe Zhao
2026-09-09 20:25 ` Daeho Jeong
2026-09-08 3:41 ` Nanzhe Zhao
2026-08-26 8:26 ` [PATCH 02/14] f2fs: carry subpage offset and count in write IO Nanzhe Zhao
2026-08-27 7:16 ` Chao Yu
2026-08-27 21:06 ` [f2fs-dev] " Daeho Jeong
2026-08-26 8:26 ` [PATCH 03/14] f2fs: support regular file buffered writes on large folios Nanzhe Zhao
2026-08-27 8:56 ` Chao Yu
2026-08-27 21:13 ` [f2fs-dev] " Daeho Jeong
2026-09-07 3:51 ` [f2fs-dev] [PATCH 03/14] f2fs: support regular file buffered writes Nanzhe Zhao
2026-09-07 6:59 ` Chao Yu
2026-09-07 11:58 ` Nanzhe Zhao
2026-09-07 13:03 ` Nanzhe Zhao
2026-09-09 8:41 ` Chao Yu
2026-09-09 20:40 ` [f2fs-dev] [PATCH 03/14] f2fs: support regular file buffered writes on large folios Daeho Jeong
2026-09-10 10:33 ` Nanzhe Zhao
2026-08-31 3:04 ` Chao Yu
2026-08-26 8:26 ` [PATCH 04/14] f2fs: support atomic file large folios buffered write Nanzhe Zhao
2026-08-27 9:24 ` Chao Yu
2026-08-26 8:26 ` [PATCH 05/14] f2fs: support large folio writeback Nanzhe Zhao
2026-08-27 11:17 ` Chao Yu
2026-08-27 22:39 ` [f2fs-dev] " Daeho Jeong
2026-09-04 4:04 ` Daeho Jeong
2026-09-04 4:07 ` Daeho Jeong
2026-09-07 3:57 ` Nanzhe Zhao
2026-09-09 21:03 ` Daeho Jeong
2026-09-07 10:12 ` Nanzhe Zhao
2026-09-09 21:08 ` Daeho Jeong
2026-09-07 3:51 ` Nanzhe Zhao
2026-09-07 6:59 ` Chao Yu
2026-08-26 8:26 ` [PATCH 06/14] f2fs: prepare mmap write faults for large folios Nanzhe Zhao
2026-08-27 12:36 ` Chao Yu
2026-08-28 17:18 ` [f2fs-dev] " Daeho Jeong
2026-09-07 7:34 ` Nanzhe Zhao
2026-09-09 7:34 ` Chao Yu
2026-09-09 21:22 ` Daeho Jeong
2026-08-26 8:26 ` [PATCH 07/14] f2fs: make GC migration large-folio aware Nanzhe Zhao
2026-08-28 17:20 ` [f2fs-dev] " Daeho Jeong
2026-09-07 11:45 ` Nanzhe Zhao
2026-09-09 19:33 ` Daeho Jeong
2026-08-31 3:14 ` Chao Yu
2026-08-26 8:26 ` [PATCH 08/14] f2fs: optimize small block size large folio read Nanzhe Zhao
2026-08-31 4:21 ` Chao Yu
2026-08-26 8:26 ` [PATCH 09/14] f2fs: support partial uptodate " Nanzhe Zhao
2026-08-26 8:26 ` [PATCH 10/14] f2fs: handle partial truncate of large folio dirty subpages Nanzhe Zhao
2026-08-31 7:46 ` Chao Yu
2026-08-26 13:09 ` [PATCH 11/14] f2fs: fix zeroing paths for large folios Nanzhe Zhao
2026-08-31 7:56 ` Chao Yu
2026-08-26 13:09 ` [PATCH 12/14] f2fs: handle block cloning within the same large folio Nanzhe Zhao
2026-08-31 8:19 ` Chao Yu
2026-09-07 9:57 ` [f2fs-dev] " Nanzhe Zhao
2026-09-07 10:24 ` Chao Yu [this message]
2026-08-26 13:09 ` [PATCH 13/14] f2fs: allow large folio support to writeable files Nanzhe Zhao
2026-08-28 17:44 ` [f2fs-dev] " Daeho Jeong
2026-09-07 6:33 ` Nanzhe Zhao
2026-09-09 19:23 ` Daeho Jeong
2026-08-31 8:31 ` Chao Yu
2026-09-07 11:14 ` [f2fs-dev] " Nanzhe Zhao
2026-08-26 13:09 ` [PATCH 14/14] f2fs: make compressed files compatible with large folio Nanzhe Zhao
2026-08-28 17:52 ` [f2fs-dev] " Daeho Jeong
2026-09-07 3:45 ` Nanzhe Zhao
2026-08-31 8:46 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f9839ca2-1554-450d-9e98-72d686a8402d@kernel.org \
--to=chao@kernel.org \
--cc=David.Hildenbrand@arm.com \
--cc=Dev.Jain@arm.com \
--cc=Ryan.Roberts@arm.com \
--cc=baohua@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=jyescas@google.com \
--cc=kaleshsingh@google.com \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lipengfei28@xiaomi.com \
--cc=nzzhao.sigma@gmail.com \
--cc=zhangbo56@xiaomi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®