Re: [PATCH v3 2/5] platform/x86: think-lmi: Correct System password interface

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Fri, 26 May 2023, Mark Pearson wrote:

> The system password identification was incorrect. This means that if
> the password was enabled it wouldn't be detected correctly; and setting
> it would not work.
> Also updated code to use TLMI_SMP_PWD instead of TLMI_SYS_PWD to be in
> sync with Lenovo documentation.
> 
> Correct these mistakes.
> 
> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>

Missing Fixes tag?

> ---
> Changes in v2:
>  - Updated define name to be SMP_PWD instead of SYS_PWD
>  - Clarified in comments what each password type is.
> Changes in v3: None. Version bump with rest of series
> 
>  drivers/platform/x86/think-lmi.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c
> index 2745224f62ab..c7e98fbe7c3d 100644
> --- a/drivers/platform/x86/think-lmi.c
> +++ b/drivers/platform/x86/think-lmi.c
> @@ -168,11 +168,11 @@ MODULE_PARM_DESC(debug_support, "Enable debug command support");
>   */
>  #define LENOVO_CERT_THUMBPRINT_GUID "C59119ED-1C0D-4806-A8E9-59AA318176C4"
>  
> -#define TLMI_POP_PWD (1 << 0)
> -#define TLMI_PAP_PWD (1 << 1)
> -#define TLMI_HDD_PWD (1 << 2)
> -#define TLMI_SYS_PWD (1 << 3)
> -#define TLMI_CERT    (1 << 7)
> +#define TLMI_POP_PWD (1 << 0) /* Supervisor */
> +#define TLMI_PAP_PWD (1 << 1) /* Power-on */
> +#define TLMI_HDD_PWD (1 << 2) /* HDD/NVME */
> +#define TLMI_SMP_PWD (1 << 6) /* System Management */
> +#define TLMI_CERT    (1 << 7) /* Certificate Based */

Whe you're adding Fixes tag, please make this change minimal by just 
adding TLMI_SMP_PWD.

The rest of these define changes are a good too but it's unrelated to the 
actual fix so they should be in a separate patch. And once you move it 
into own change, convert to BIT() while at it.

-- 
 i.


>  #define to_tlmi_pwd_setting(kobj)  container_of(kobj, struct tlmi_pwd_setting, kobj)
>  #define to_tlmi_attr_setting(kobj)  container_of(kobj, struct tlmi_attr_setting, kobj)
> @@ -1509,11 +1509,11 @@ static int tlmi_analyze(void)
>  		tlmi_priv.pwd_power->valid = true;
>  
>  	if (tlmi_priv.opcode_support) {
> -		tlmi_priv.pwd_system = tlmi_create_auth("sys", "system");
> +		tlmi_priv.pwd_system = tlmi_create_auth("smp", "system");
>  		if (!tlmi_priv.pwd_system)
>  			goto fail_clear_attr;
>  
> -		if (tlmi_priv.pwdcfg.core.password_state & TLMI_SYS_PWD)
> +		if (tlmi_priv.pwdcfg.core.password_state & TLMI_SMP_PWD)
>  			tlmi_priv.pwd_system->valid = true;
>  
>  		tlmi_priv.pwd_hdd = tlmi_create_auth("hdd", "hdd");
>