From: Tuomo Valkonen <tuomov@iki.fi>
To: linux-kernel@vger.kernel.org
Subject: Re: The ext3 way of journalling
Date: Tue, 8 Jan 2008 16:52:42 +0000 (UTC) [thread overview]
Message-ID: <slrnfo7aiq.6m2.tuomov@jolt.modeemi.cs.tut.fi> (raw)
In-Reply-To: <Pine.LNX.4.64.0801081725480.3032@fbirervta.pbzchgretzou.qr>
On 2008-01-08, Jan Engelhardt <jengelh@computergmbh.de> wrote:
> Do it step-by-step.
Still too much work.
> I can recommend that you try another distribution then.
They all suck.
>>that load drivers in wrong order etc.,
>
> What specific modules and which order do you need for the disks?
> There is also kernel-side loading order coming up:
> http://lwn.net/Articles/260856/
>
>>and are difficult to configure
>
> I do not really have to configure anything on my machine. Then again,
> yours might be vastly different.
Typically distros' stock kernels load the intorable integrated buzz-chip
as the first sound card, and the wrong network adapter as eth0. SATA and
USB disks appear as some randomly ordered scsi nodes, and so on. This
could be configured with udev if one were willing to learn -- for a
fundamentally very trivial task -- yet another wheel-reinving unnecessarily
cryptic piece of shit, to tolerate distros breaking your cryptic config
constantly, and to tolerate its intolerable slowness at boot. (/dev should
still be the UI for modifying dynamic device mappings, reacting to ln, mv,
chmod, etc., instead of being reduced into a race-condition ridden tmpfs
shadow, that loses your normally created symlinks and permissions at boot.)
But the stock kernels also takes age at boot in (trying to) load a zillion
unnecessary drivers. They need to be configured to not load them. But
_obviously_ they won't use a _simple_ listing of the modules to load
(/etc/modules), but demand complex initrd editing. And all of those tools
that I've seen and have not required too much work, have again demanded
udev. No thanks.
--
Tuomo
next prev parent reply other threads:[~2008-01-08 16:53 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-08 16:07 Tuomo Valkonen
2008-01-08 16:35 ` Jan Engelhardt
2008-01-08 16:52 ` Tuomo Valkonen [this message]
2008-01-08 17:18 ` Jan Engelhardt
2008-01-08 17:48 ` Tuomo Valkonen
2008-01-08 18:20 ` Jan Engelhardt
2008-01-08 18:32 ` Diego Calleja
2008-01-08 18:42 ` Tuomo Valkonen
2008-01-08 16:39 ` John Stoffel
2008-01-08 16:59 ` Tuomo Valkonen
2008-01-08 21:49 ` John Stoffel
2008-01-09 13:39 ` Mathieu SEGAUD
2008-01-09 14:16 ` Tuomo Valkonen
2008-01-10 13:16 ` Theodore Tso
2008-01-10 13:41 ` Tuomo Valkonen
2008-01-12 15:06 ` Theodore Tso
2008-01-12 19:24 ` Andrey Vul
2008-01-13 22:13 ` Tuomo Valkonen
2008-01-13 22:23 ` Tuomo Valkonen
2008-01-13 23:11 ` Theodore Tso
2008-01-14 7:15 ` Tuomo Valkonen
2008-01-14 9:42 ` Bernd Petrovitsch
2008-01-14 9:48 ` Tuomo Valkonen
2008-01-14 9:57 ` Bernd Petrovitsch
2008-01-14 10:44 ` Christer Weinigel
2008-01-14 11:11 ` Tuomo Valkonen
2008-01-14 11:18 ` Bernd Petrovitsch
2008-01-14 11:27 ` Tuomo Valkonen
2008-01-14 10:06 ` Krzysztof Halasa
2008-01-14 11:03 ` Tuomo Valkonen
2008-01-14 12:46 ` Krzysztof Halasa
2008-01-14 16:18 ` Lennart Sorensen
2008-01-14 23:13 ` Alejandro Riveira Fernández
2008-01-15 16:31 ` Lennart Sorensen
2008-01-15 1:09 ` Krzysztof Halasa
2008-01-15 16:32 ` Lennart Sorensen
2008-01-14 16:10 ` me
2008-01-14 16:17 ` Tuomo Valkonen
2008-01-14 22:39 ` John Hubbard
2008-01-14 0:36 ` Bernd Eckenfels
2008-01-08 16:48 ` Andre Noll
2008-01-08 17:52 ` Tuomo Valkonen
2008-01-08 18:07 ` Masoud Sharbiani "مسعود شربیانی"
2008-01-08 18:16 ` Tuomo Valkonen
2008-01-08 18:22 ` Alan Cox
2008-01-08 18:11 ` Jan Engelhardt
2008-01-08 18:20 ` Tuomo Valkonen
2008-01-08 18:29 ` Andre Noll
2008-01-08 18:40 ` Tuomo Valkonen
2008-01-08 18:47 ` Alan Cox
2008-01-08 23:06 ` Matthias Schniedermeyer
2008-01-09 7:56 ` Tuomo Valkonen
2008-01-09 10:21 ` Matthias Schniedermeyer
2008-01-09 10:28 ` Matthias Schniedermeyer
2008-01-09 12:30 ` Theodore Tso
2008-01-10 11:30 ` Helge Hafting
2008-01-10 14:02 ` Lennart Sorensen
2008-01-10 14:41 ` Matthias Schniedermeyer
2008-01-09 2:05 ` Bernd Petrovitsch
2008-01-08 16:53 ` Andi Kleen
2008-01-08 17:01 ` Tuomo Valkonen
2008-01-08 18:15 ` Theodore Tso
2008-01-08 20:51 ` Andi Kleen
2008-01-08 21:03 ` Ondrej Zary
2008-01-08 21:57 ` Theodore Tso
2008-01-09 3:21 ` Kyle Moffett
2008-01-09 7:55 ` Valdis.Kletnieks
2008-01-09 12:49 ` Theodore Tso
2008-01-09 8:00 ` BuraphaLinux Server
2008-01-09 8:21 ` Valdis.Kletnieks
2008-01-09 9:54 ` Martin Schwidefsky
2008-01-09 12:25 ` Theodore Tso
2008-01-09 12:44 ` Michal Schmidt
2008-01-09 13:53 ` Martin Schwidefsky
2008-01-09 19:47 ` Martin Schwidefsky
2008-01-08 21:32 ` Pavel Machek
2008-02-08 4:16 ` Rogelio Serrano
[not found] <9JpbI-5yi-9@gated-at.bofh.it>
[not found] ` <9JpEP-6df-25@gated-at.bofh.it>
[not found] ` <9JpYc-6Eb-13@gated-at.bofh.it>
[not found] ` <9Jqhr-7l9-13@gated-at.bofh.it>
[not found] ` <9JqKt-7Z5-9@gated-at.bofh.it>
2008-01-08 22:24 ` Bodo Eggert
[not found] ` <9Jqri-7ym-17@gated-at.bofh.it>
[not found] ` <9JqUn-8bF-15@gated-at.bofh.it>
[not found] ` <9JvKj-85h-41@gated-at.bofh.it>
2008-01-11 16:22 ` Bodo Eggert
2008-01-11 18:39 ` Lennart Sorensen
2008-01-12 1:41 ` Bodo Eggert
2008-01-12 7:10 ` TimC
2008-01-12 10:08 ` Matthias Schniedermeyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=slrnfo7aiq.6m2.tuomov@jolt.modeemi.cs.tut.fi \
--to=tuomov@iki.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®