From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 01/13] clk: meson8b: export the SAR ADC clocks
Date: Mon, 12 Jun 2017 09:28:05 +0200 [thread overview]
Message-ID: <869e279b-7b71-4946-b7ae-e507d6114956@baylibre.com> (raw)
In-Reply-To: <20170611101644.28581-2-martin.blumenstingl@googlemail.com>
On 06/11/2017 12:16 PM, Martin Blumenstingl wrote:
> Export the clocks for the SAR ADC so they can be used in the
> dt-bindings.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/clk/meson/meson8b.h | 4 ++--
> include/dt-bindings/clock/meson8b-clkc.h | 2 ++
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
> index 3881defc8644..5447d4a5c9ba 100644
> --- a/drivers/clk/meson/meson8b.h
> +++ b/drivers/clk/meson/meson8b.h
> @@ -87,7 +87,7 @@
> #define CLKID_PERIPHS 20
> #define CLKID_SPICC 21
> #define CLKID_I2C 22
> -#define CLKID_SAR_ADC 23
> +/* #define CLKID_SAR_ADC */
> #define CLKID_SMART_CARD 24
> #define CLKID_RNG0 25
> #define CLKID_UART0 26
> @@ -133,7 +133,7 @@
> #define CLKID_MMC_PCLK 66
> #define CLKID_DVIN 67
> #define CLKID_UART2 68
> -#define CLKID_SANA 69
> +/* #define CLKID_SANA */
> #define CLKID_VPU_INTR 70
> #define CLKID_SEC_AHB_AHB3_BRIDGE 71
> #define CLKID_CLK81_A9 72
> diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h
> index a55ff8c9b30f..1c7f090da440 100644
> --- a/include/dt-bindings/clock/meson8b-clkc.h
> +++ b/include/dt-bindings/clock/meson8b-clkc.h
> @@ -21,5 +21,7 @@
> #define CLKID_ZERO 13
> #define CLKID_MPEG_SEL 14
> #define CLKID_MPEG_DIV 15
> +#define CLKID_SAR_ADC 23
> +#define CLKID_SANA 69
>
> #endif /* __MESON8B_CLKC_H */
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
next prev parent reply other threads:[~2017-06-12 7:28 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-11 10:16 [PATCH 00/13] add support for more devices on Meson8 and Meson8b Martin Blumenstingl
2017-06-11 10:16 ` [PATCH 01/13] clk: meson8b: export the SAR ADC clocks Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong [this message]
2017-06-11 10:16 ` [PATCH 02/13] clk: meson8b: export the SDIO clock Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 03/13] clk: meson8b: export the gate clock for the HW random number generator Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 04/13] clk: meson8b: export the USB clocks Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 05/13] clk: meson8b: export the ethernet gate clock Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 06/13] ARM: dts: meson8: add the PWM_E and PWM_F pins Martin Blumenstingl
2017-06-12 7:32 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 07/13] ARM: dts: meson8: add the pins for the SDIO controller Martin Blumenstingl
2017-06-12 7:32 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 08/13] ARM: dts: meson: add the SAR ADC Martin Blumenstingl
2017-06-12 7:33 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 09/13] ARM: dts: meson8: add reserved memory zones Martin Blumenstingl
2017-06-12 7:32 ` Neil Armstrong
2017-06-14 21:46 ` Martin Blumenstingl
2017-06-11 10:16 ` [PATCH 10/13] ARM: dts: meson: add the hardware random number generator Martin Blumenstingl
2017-06-12 7:35 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 11/13] ARM: dts: meson: add USB support on Meson8 and Meson8b Martin Blumenstingl
2017-06-12 7:36 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 12/13] ARM: dts: meson8b: add the SCU device node Martin Blumenstingl
2017-06-12 7:37 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 13/13] ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Martin Blumenstingl
2017-06-12 7:37 ` Neil Armstrong
2017-06-12 7:32 ` [PATCH 00/13] add support for more devices " Jerome Brunet
2017-06-14 21:39 ` Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 00/10] " Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 01/10] ARM: dts: meson: use C preprocessor friendly include syntax Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 02/10] ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 03/10] ARM: dts: meson8: add the PWM_E and PWM_F pins Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 04/10] ARM: dts: meson8: add the pins for the SDIO controller Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 05/10] ARM: dts: meson: add the SAR ADC Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 06/10] ARM: dts: meson8: add reserved memory zones Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 07/10] ARM: dts: meson: add the hardware random number generator Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 08/10] ARM: dts: meson: add USB support on Meson8 and Meson8b Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 09/10] ARM: dts: meson8b: add the SCU device node Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 10/10] ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Martin Blumenstingl
2017-06-16 19:10 ` [PATCH v2 00/10] add support for more devices " Kevin Hilman
2017-06-16 19:12 ` Kevin Hilman
2017-06-16 23:00 ` Martin Blumenstingl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=869e279b-7b71-4946-b7ae-e507d6114956@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®