mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 04/13] clk: meson8b: export the USB clocks
Date: Mon, 12 Jun 2017 09:28:32 +0200	[thread overview]
Message-ID: <9e75716b-eb9e-0086-5378-69c5542e7a7a@baylibre.com> (raw)
In-Reply-To: <20170611101644.28581-5-martin.blumenstingl@googlemail.com>

On 06/11/2017 12:16 PM, Martin Blumenstingl wrote:
> Export the USB related clocks (for the USB controller and the USB2 PHYs)
> so they can be used in the dt-bindings.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/clk/meson/meson8b.h              | 10 +++++-----
>  include/dt-bindings/clock/meson8b-clkc.h |  5 +++++
>  2 files changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
> index 51c3f6717180..17479c60864d 100644
> --- a/drivers/clk/meson/meson8b.h
> +++ b/drivers/clk/meson/meson8b.h
> @@ -114,12 +114,12 @@
>  #define CLKID_AIU		47
>  #define CLKID_UART1		48
>  #define CLKID_G2D		49
> -#define CLKID_USB0		50
> -#define CLKID_USB1		51
> +/* #define CLKID_USB0 */
> +/* #define CLKID_USB1 */
>  #define CLKID_RESET		52
>  #define CLKID_NAND		53
>  #define CLKID_DOS_PARSER	54
> -#define CLKID_USB		55
> +/* #define CLKID_USB */
>  #define CLKID_VDIN1		56
>  #define CLKID_AHB_ARB0		57
>  #define CLKID_EFUSE		58
> @@ -128,8 +128,8 @@
>  #define CLKID_AHB_CTRL_BUS	61
>  #define CLKID_HDMI_INTR_SYNC	62
>  #define CLKID_HDMI_PCLK		63
> -#define CLKID_USB1_DDR_BRIDGE	64
> -#define CLKID_USB0_DDR_BRIDGE	65
> +/* CLKID_USB1_DDR_BRIDGE */
> +/* CLKID_USB0_DDR_BRIDGE */
>  #define CLKID_MMC_PCLK		66
>  #define CLKID_DVIN		67
>  #define CLKID_UART2		68
> diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h
> index f004e6760b5d..04f0d1fcd308 100644
> --- a/include/dt-bindings/clock/meson8b-clkc.h
> +++ b/include/dt-bindings/clock/meson8b-clkc.h
> @@ -24,6 +24,11 @@
>  #define CLKID_SAR_ADC		23
>  #define CLKID_RNG0		25
>  #define CLKID_SDIO		30
> +#define CLKID_USB0		50
> +#define CLKID_USB1		51
> +#define CLKID_USB		55
> +#define CLKID_USB1_DDR_BRIDGE	64
> +#define CLKID_USB0_DDR_BRIDGE	65
>  #define CLKID_SANA		69
>  
>  #endif /* __MESON8B_CLKC_H */
> 


Acked-by: Neil Armstrong <narmstrong@baylibre.com>

  reply	other threads:[~2017-06-12  7:28 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-11 10:16 [PATCH 00/13] add support for more devices on Meson8 and Meson8b Martin Blumenstingl
2017-06-11 10:16 ` [PATCH 01/13] clk: meson8b: export the SAR ADC clocks Martin Blumenstingl
2017-06-12  7:28   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 02/13] clk: meson8b: export the SDIO clock Martin Blumenstingl
2017-06-12  7:28   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 03/13] clk: meson8b: export the gate clock for the HW random number generator Martin Blumenstingl
2017-06-12  7:28   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 04/13] clk: meson8b: export the USB clocks Martin Blumenstingl
2017-06-12  7:28   ` Neil Armstrong [this message]
2017-06-11 10:16 ` [PATCH 05/13] clk: meson8b: export the ethernet gate clock Martin Blumenstingl
2017-06-12  7:28   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 06/13] ARM: dts: meson8: add the PWM_E and PWM_F pins Martin Blumenstingl
2017-06-12  7:32   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 07/13] ARM: dts: meson8: add the pins for the SDIO controller Martin Blumenstingl
2017-06-12  7:32   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 08/13] ARM: dts: meson: add the SAR ADC Martin Blumenstingl
2017-06-12  7:33   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 09/13] ARM: dts: meson8: add reserved memory zones Martin Blumenstingl
2017-06-12  7:32   ` Neil Armstrong
2017-06-14 21:46     ` Martin Blumenstingl
2017-06-11 10:16 ` [PATCH 10/13] ARM: dts: meson: add the hardware random number generator Martin Blumenstingl
2017-06-12  7:35   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 11/13] ARM: dts: meson: add USB support on Meson8 and Meson8b Martin Blumenstingl
2017-06-12  7:36   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 12/13] ARM: dts: meson8b: add the SCU device node Martin Blumenstingl
2017-06-12  7:37   ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 13/13] ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Martin Blumenstingl
2017-06-12  7:37   ` Neil Armstrong
2017-06-12  7:32 ` [PATCH 00/13] add support for more devices " Jerome Brunet
2017-06-14 21:39   ` Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 00/10] " Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 01/10] ARM: dts: meson: use C preprocessor friendly include syntax Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 02/10] ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 03/10] ARM: dts: meson8: add the PWM_E and PWM_F pins Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 04/10] ARM: dts: meson8: add the pins for the SDIO controller Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 05/10] ARM: dts: meson: add the SAR ADC Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 06/10] ARM: dts: meson8: add reserved memory zones Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 07/10] ARM: dts: meson: add the hardware random number generator Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 08/10] ARM: dts: meson: add USB support on Meson8 and Meson8b Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 09/10] ARM: dts: meson8b: add the SCU device node Martin Blumenstingl
2017-06-15 21:33   ` [PATCH v2 10/10] ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Martin Blumenstingl
2017-06-16 19:10   ` [PATCH v2 00/10] add support for more devices " Kevin Hilman
2017-06-16 19:12   ` Kevin Hilman
2017-06-16 23:00     ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9e75716b-eb9e-0086-5378-69c5542e7a7a@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®