From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 02/13] clk: meson8b: export the SDIO clock
Date: Mon, 12 Jun 2017 09:28:14 +0200 [thread overview]
Message-ID: <cab58b96-050d-2992-394d-40204ca1cb7a@baylibre.com> (raw)
In-Reply-To: <20170611101644.28581-3-martin.blumenstingl@googlemail.com>
On 06/11/2017 12:16 PM, Martin Blumenstingl wrote:
> Export the SDIO clock so it can be used in the dt-bindings.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/clk/meson/meson8b.h | 2 +-
> include/dt-bindings/clock/meson8b-clkc.h | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
> index 5447d4a5c9ba..e0fb386ccc23 100644
> --- a/drivers/clk/meson/meson8b.h
> +++ b/drivers/clk/meson/meson8b.h
> @@ -94,7 +94,7 @@
> #define CLKID_SDHC 27
> #define CLKID_STREAM 28
> #define CLKID_ASYNC_FIFO 29
> -#define CLKID_SDIO 30
> +/* #define CLKID_SDIO */
> #define CLKID_ABUF 31
> #define CLKID_HIU_IFACE 32
> #define CLKID_ASSIST_MISC 33
> diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h
> index 1c7f090da440..821b08574900 100644
> --- a/include/dt-bindings/clock/meson8b-clkc.h
> +++ b/include/dt-bindings/clock/meson8b-clkc.h
> @@ -22,6 +22,7 @@
> #define CLKID_MPEG_SEL 14
> #define CLKID_MPEG_DIV 15
> #define CLKID_SAR_ADC 23
> +#define CLKID_SDIO 30
> #define CLKID_SANA 69
>
> #endif /* __MESON8B_CLKC_H */
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
next prev parent reply other threads:[~2017-06-12 7:28 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-11 10:16 [PATCH 00/13] add support for more devices on Meson8 and Meson8b Martin Blumenstingl
2017-06-11 10:16 ` [PATCH 01/13] clk: meson8b: export the SAR ADC clocks Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 02/13] clk: meson8b: export the SDIO clock Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong [this message]
2017-06-11 10:16 ` [PATCH 03/13] clk: meson8b: export the gate clock for the HW random number generator Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 04/13] clk: meson8b: export the USB clocks Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 05/13] clk: meson8b: export the ethernet gate clock Martin Blumenstingl
2017-06-12 7:28 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 06/13] ARM: dts: meson8: add the PWM_E and PWM_F pins Martin Blumenstingl
2017-06-12 7:32 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 07/13] ARM: dts: meson8: add the pins for the SDIO controller Martin Blumenstingl
2017-06-12 7:32 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 08/13] ARM: dts: meson: add the SAR ADC Martin Blumenstingl
2017-06-12 7:33 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 09/13] ARM: dts: meson8: add reserved memory zones Martin Blumenstingl
2017-06-12 7:32 ` Neil Armstrong
2017-06-14 21:46 ` Martin Blumenstingl
2017-06-11 10:16 ` [PATCH 10/13] ARM: dts: meson: add the hardware random number generator Martin Blumenstingl
2017-06-12 7:35 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 11/13] ARM: dts: meson: add USB support on Meson8 and Meson8b Martin Blumenstingl
2017-06-12 7:36 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 12/13] ARM: dts: meson8b: add the SCU device node Martin Blumenstingl
2017-06-12 7:37 ` Neil Armstrong
2017-06-11 10:16 ` [PATCH 13/13] ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Martin Blumenstingl
2017-06-12 7:37 ` Neil Armstrong
2017-06-12 7:32 ` [PATCH 00/13] add support for more devices " Jerome Brunet
2017-06-14 21:39 ` Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 00/10] " Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 01/10] ARM: dts: meson: use C preprocessor friendly include syntax Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 02/10] ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 03/10] ARM: dts: meson8: add the PWM_E and PWM_F pins Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 04/10] ARM: dts: meson8: add the pins for the SDIO controller Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 05/10] ARM: dts: meson: add the SAR ADC Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 06/10] ARM: dts: meson8: add reserved memory zones Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 07/10] ARM: dts: meson: add the hardware random number generator Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 08/10] ARM: dts: meson: add USB support on Meson8 and Meson8b Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 09/10] ARM: dts: meson8b: add the SCU device node Martin Blumenstingl
2017-06-15 21:33 ` [PATCH v2 10/10] ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b Martin Blumenstingl
2017-06-16 19:10 ` [PATCH v2 00/10] add support for more devices " Kevin Hilman
2017-06-16 19:12 ` Kevin Hilman
2017-06-16 23:00 ` Martin Blumenstingl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cab58b96-050d-2992-394d-40204ca1cb7a@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®