From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan.Bowens@atmel.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, pmeerw@pmeerw.net,
bleung@chromium.org, olofj@chromium.org
Cc: Iiro Valkonen <iiro.valkonen@atmel.com>,
Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 09/53] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips
Date: Wed, 5 Jun 2013 18:37:02 +0100 [thread overview]
Message-ID: <1370453866-16534-10-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1370453866-16534-1-git-send-email-nick.dyer@itdev.co.uk>
From: Iiro Valkonen <iiro.valkonen@atmel.com>
The delay before the chip can be accessed after reset varies between different
chips in maXTouch family. Waiting for an interrupt and a T6 status message
with the RESET bit set is a better behaviour.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 109 ++++++++++++++++++++++++------
1 file changed, 87 insertions(+), 22 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 1e24e54..11ee78a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -88,6 +88,9 @@
#define MXT_COMMAND_REPORTALL 3
#define MXT_COMMAND_DIAGNOSTIC 5
+/* Define for T6 status byte */
+#define MXT_T6_STATUS_RESET (1 << 7)
+
/* MXT_GEN_POWER_T7 field */
#define MXT_POWER_IDLEACQINT 0
#define MXT_POWER_ACTVACQINT 1
@@ -179,9 +182,13 @@
/* Define for MXT_GEN_COMMAND_T6 */
#define MXT_BOOT_VALUE 0xa5
+#define MXT_RESET_VALUE 0x01
#define MXT_BACKUP_VALUE 0x55
+
+/* Delay times */
#define MXT_BACKUP_TIME 50 /* msec */
#define MXT_RESET_TIME 200 /* msec */
+#define MXT_RESET_TIMEOUT 3000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
@@ -256,6 +263,7 @@ struct mxt_data {
/* Cached parameters from object table */
u8 T6_reportid;
+ u16 T6_address;
u8 T9_reportid_min;
u8 T9_reportid_max;
u8 T19_reportid;
@@ -263,6 +271,9 @@ struct mxt_data {
/* for fw update in bootloader */
struct completion bl_completion;
+ /* for reset handling */
+ struct completion reset_completion;
+
/* Enable reporting of input events */
bool enable_reporting;
};
@@ -348,10 +359,10 @@ static void mxt_dump_message(struct device *dev,
message->reportid, 7, message->message);
}
-static int mxt_wait_for_chg(struct mxt_data *data, unsigned int timeout_ms)
+static int mxt_wait_for_completion(struct mxt_data *data,
+ struct completion *comp, unsigned int timeout_ms)
{
struct device *dev = &data->client->dev;
- struct completion *comp = &data->bl_completion;
unsigned long timeout = msecs_to_jiffies(timeout_ms);
long ret;
@@ -380,7 +391,8 @@ recheck:
* CHG assertion before reading the status byte.
* Once the status byte has been read, the line is deasserted.
*/
- ret = mxt_wait_for_chg(data, MXT_FW_CHG_TIMEOUT);
+ ret = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_FW_CHG_TIMEOUT);
if (ret) {
/*
* TODO: handle -EINTR better by terminating fw update
@@ -667,6 +679,9 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
unsigned csum = mxt_extract_T6_csum(&payload[1]);
dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
status, csum);
+
+ if (status & MXT_T6_STATUS_RESET)
+ complete(&data->reset_completion);
} else if (mxt_is_T9_message(data, &message)) {
int id = reportid - data->T9_reportid_min;
mxt_input_touchevent(data, &message, id);
@@ -703,6 +718,59 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
return mxt_process_messages_until_invalid(data);
}
+static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
+ u8 value, bool wait)
+{
+ u16 reg;
+ u8 command_register;
+ int timeout_counter = 0;
+ int ret;
+
+ reg = data->T6_address + cmd_offset;
+
+ ret = mxt_write_reg(data->client, reg, value);
+ if (ret)
+ return ret;
+
+ if (!wait)
+ return 0;
+
+ do {
+ msleep(20);
+ ret = __mxt_read_reg(data->client, reg, 1, &command_register);
+ if (ret)
+ return ret;
+ } while ((command_register != 0) && (timeout_counter++ <= 100));
+
+ if (timeout_counter > 100) {
+ dev_err(&data->client->dev, "Command failed!\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int mxt_soft_reset(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int ret = 0;
+
+ dev_info(dev, "Resetting chip\n");
+
+ INIT_COMPLETION(data->reset_completion);
+
+ ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
+ if (ret)
+ return ret;
+
+ ret = mxt_wait_for_completion(data, &data->reset_completion,
+ MXT_RESET_TIMEOUT);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int mxt_check_reg_init(struct mxt_data *data)
{
const struct mxt_platform_data *pdata = data->pdata;
@@ -829,6 +897,7 @@ static int mxt_get_object_table(struct mxt_data *data)
switch (object->type) {
case MXT_GEN_COMMAND_T6:
data->T6_reportid = min_id;
+ data->T6_address = object->start_address;
break;
case MXT_TOUCH_MULTI_T9:
data->T9_reportid_min = min_id;
@@ -887,16 +956,10 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
goto err_free_object_table;
- /* Backup to memory */
- mxt_write_object(data, MXT_GEN_COMMAND_T6,
- MXT_COMMAND_BACKUPNV,
- MXT_BACKUP_VALUE);
- msleep(MXT_BACKUP_TIME);
-
- /* Soft reset */
- mxt_write_object(data, MXT_GEN_COMMAND_T6,
- MXT_COMMAND_RESET, 1);
- msleep(MXT_RESET_TIME);
+ error = mxt_t6_command(data, MXT_COMMAND_BACKUPNV,
+ MXT_BACKUP_VALUE, false);
+ if (!error)
+ mxt_soft_reset(data);
/* Update matrix size at info struct */
error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
@@ -1040,8 +1103,10 @@ static int mxt_load_fw(struct device *dev, const char *fn)
/* Change to the bootloader mode */
data->in_bootloader = true;
- mxt_write_object(data, MXT_GEN_COMMAND_T6,
- MXT_COMMAND_RESET, MXT_BOOT_VALUE);
+ ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false);
+ if (ret)
+ goto release_firmware;
+
msleep(MXT_RESET_TIME);
/* Change to slave address of bootloader */
@@ -1084,18 +1149,21 @@ static int mxt_load_fw(struct device *dev, const char *fn)
}
/* Wait for flash. */
- ret = mxt_wait_for_chg(data, MXT_FW_RESET_TIME);
+ ret = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_FW_RESET_TIME);
if (ret)
goto disable_irq;
/* Wait for device to reset. Some bootloader versions do not assert
* the CHG line after bootloading has finished, so ignore error */
- mxt_wait_for_chg(data, MXT_FW_RESET_TIME);
+ mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_FW_RESET_TIME);
data->in_bootloader = false;
disable_irq:
disable_irq(data->irq);
+release_firmware:
release_firmware(fw);
/* Change to slave address of application */
@@ -1216,6 +1284,7 @@ static int mxt_probe(struct i2c_client *client,
data->irq = client->irq;
init_completion(&data->bl_completion);
+ init_completion(&data->reset_completion);
mxt_calc_resolution(data);
@@ -1341,11 +1410,7 @@ static int mxt_resume(struct device *dev)
struct mxt_data *data = i2c_get_clientdata(client);
struct input_dev *input_dev = data->input_dev;
- /* Soft reset */
- mxt_write_object(data, MXT_GEN_COMMAND_T6,
- MXT_COMMAND_RESET, 1);
-
- msleep(MXT_RESET_TIME);
+ mxt_soft_reset(data);
mutex_lock(&input_dev->mutex);
--
1.7.10.4
next prev parent reply other threads:[~2013-06-05 17:48 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 17:36 Atmel updates to atmel_mxt_ts touch controller driver - v5 Daniel Kurtz <djkurtz@chromium.org>, Henrik Rydberg <rydberg@euromail.se>, Joonyoung Shim <jy0922.shim@samsung.com>, Alan.Bowens@atmel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, pmeerw@pmeerw.net, bleung@chromium.org, olofj@chromium.org Nick Dyer
2013-06-05 17:36 ` [PATCH 01/53] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-05 17:36 ` [PATCH 02/53] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-06-05 17:36 ` [PATCH 03/53] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-05 17:36 ` [PATCH 04/53] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-05 17:36 ` [PATCH 05/53] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-05 17:36 ` [PATCH 06/53] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-05 17:37 ` [PATCH 07/53] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-05 17:37 ` [PATCH 08/53] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-06-05 17:37 ` Nick Dyer [this message]
2013-06-05 17:37 ` [PATCH 10/53] Input: atmel_mxt_ts - Add memory access interface via sysfs Nick Dyer
2013-06-05 17:57 ` Dmitry Torokhov
2013-06-05 18:45 ` Nick Dyer
2013-06-05 19:04 ` Dmitry Torokhov
2013-06-05 20:31 ` Nick Dyer
2013-06-05 21:07 ` Dmitry Torokhov
2013-06-05 21:36 ` Nick Dyer
2013-06-06 10:03 ` Mark Brown
2013-06-06 10:31 ` Nick Dyer
2013-06-06 10:55 ` Mark Brown
2013-06-06 11:17 ` Nick Dyer
2013-06-06 13:16 ` Mark Brown
2013-06-06 16:13 ` Nick Dyer
2013-06-06 16:46 ` Mark Brown
2013-06-07 15:12 ` Nick Dyer
2013-06-07 15:41 ` Mark Brown
2013-06-07 16:11 ` Nick Dyer
2013-06-07 16:47 ` Mark Brown
2013-06-11 10:39 ` Nick Dyer
2013-06-11 11:47 ` Mark Brown
2013-06-11 12:16 ` Nick Dyer
2013-06-19 18:59 ` Mark Brown
2013-06-21 16:16 ` Nick Dyer
2013-07-02 10:11 ` Mark Brown
2013-07-11 7:41 ` Nick Dyer
2013-07-11 10:30 ` Mark Brown
2013-06-06 9:48 ` Mark Brown
2013-06-06 10:40 ` Nick Dyer
2013-06-06 10:46 ` Mark Brown
2013-06-06 11:00 ` Nick Dyer
2013-06-06 11:14 ` Mark Brown
2013-06-06 11:34 ` Nick Dyer
2013-06-06 13:21 ` Mark Brown
2013-06-06 18:01 ` Greg KH
2013-06-07 14:47 ` Nick Dyer
2013-06-05 17:37 ` [PATCH 11/53] Input: atmel_mxt_ts - Implement debug output for messages Nick Dyer
2013-06-05 17:37 ` [PATCH 12/53] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-05 17:37 ` [PATCH 13/53] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-06-05 17:37 ` [PATCH 14/53] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-06-05 17:37 ` [PATCH 15/53] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-05 17:37 ` [PATCH 16/53] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-05 17:37 ` [PATCH 17/53] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-05 17:37 ` [PATCH 18/53] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-05 17:37 ` [PATCH 19/53] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-05 17:37 ` [PATCH 20/53] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-05 17:37 ` [PATCH 21/53] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-05 17:37 ` [PATCH 22/53] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-06-05 17:37 ` [PATCH 23/53] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-05 17:37 ` [PATCH 24/53] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-06-05 17:37 ` [PATCH 25/53] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-05 17:37 ` [PATCH 26/53] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-05 17:37 ` [PATCH 27/53] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-06-05 17:37 ` [PATCH 28/53] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-06-05 17:37 ` [PATCH 29/53] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-05 17:37 ` [PATCH 30/53] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-05 17:37 ` [PATCH 31/53] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-05 17:37 ` [PATCH 32/53] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-05 17:37 ` [PATCH 33/53] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-05 17:37 ` [PATCH 34/53] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-05 17:37 ` [PATCH 35/53] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-05 17:37 ` [PATCH 36/53] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-05 17:37 ` [PATCH 37/53] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-05 17:37 ` [PATCH 38/53] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-05 17:37 ` [PATCH 39/53] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-06-05 17:37 ` [PATCH 40/53] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-05 17:37 ` [PATCH 41/53] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-06-05 17:37 ` [PATCH 42/53] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-05 17:37 ` [PATCH 43/53] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-05 17:37 ` [PATCH 44/53] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-07 18:37 ` Yufeng Shen
2013-06-10 9:35 ` Nick Dyer
2013-06-05 17:37 ` [PATCH 45/53] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-05 17:37 ` [PATCH 46/53] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-06-05 17:37 ` [PATCH 47/53] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-06-05 17:37 ` [PATCH 48/53] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-05 17:37 ` [PATCH 49/53] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-05 17:37 ` [PATCH 50/53] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-05 17:37 ` [PATCH 51/53] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-05 17:37 ` [PATCH 52/53] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-05 17:37 ` [PATCH 53/53] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-06 19:18 ` Atmel updates to atmel_mxt_ts touch controller driver - v5 Daniel Kurtz <djkurtz@chromium.org>, Henrik Rydberg <rydberg@euromail.se>, Joonyoung Shim <jy0922.shim@samsung.com>, Alan.Bowens@atmel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, pmeerw@pmeerw.net, bleung@chromium.org, olofj@chromium.org Dmitry Torokhov
[not found] ` <CAPDwgkPdtj0Th8P+y9e5O7swARfzS40sG1A3Ba=pAmeXfMx0Dw@mail.gmail.com>
2013-06-06 19:46 ` Dmitry Torokhov
2013-06-07 20:21 ` Yufeng Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370453866-16534-10-git-send-email-nick.dyer@itdev.co.uk \
--to=nick.dyer@itdev.co.uk \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=iiro.valkonen@atmel.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®