From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan.Bowens@atmel.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, pmeerw@pmeerw.net,
bleung@chromium.org, olofj@chromium.org
Cc: Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 35/53] Input: atmel_mxt_ts - Split message handler into separate functions
Date: Wed, 5 Jun 2013 18:37:28 +0100 [thread overview]
Message-ID: <1370453866-16534-36-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1370453866-16534-1-git-send-email-nick.dyer@itdev.co.uk>
This is in preparation for support of the T44 message count object.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 120 +++++++++++++++---------------
1 file changed, 62 insertions(+), 58 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 39a20fd..1033755 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -254,8 +254,10 @@ struct mxt_data {
struct t7_config t7_cfg;
u8 *msg_buf;
u8 t6_status;
+ bool update_input;
/* Cached parameters from object table */
+ u16 T5_address;
u8 T5_msg_size;
u8 T6_reportid;
u16 T6_address;
@@ -670,20 +672,6 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
data->t6_status = status;
}
-static int mxt_read_message(struct mxt_data *data, u8 *message)
-{
- struct mxt_object *object;
- u16 reg;
-
- object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
- if (!object)
- return -EINVAL;
-
- reg = object->start_address;
- return __mxt_read_reg(data->client, reg,
- data->T5_msg_size, message);
-}
-
static void mxt_input_button(struct mxt_data *data, u8 *message)
{
struct input_dev *input = data->input_dev;
@@ -710,7 +698,7 @@ static void mxt_input_sync(struct input_dev *input_dev)
input_sync(input_dev);
}
-static void mxt_input_touchevent(struct mxt_data *data, u8 *message)
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
{
struct device *dev = &data->client->dev;
struct input_dev *input_dev = data->input_dev;
@@ -774,49 +762,65 @@ static void mxt_input_touchevent(struct mxt_data *data, u8 *message)
/* Touch no longer active, close out slot */
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
}
+
+ data->update_input = true;
}
-static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg)
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
- u8 id = msg[0];
- return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
+ u8 report_id = message[0];
+ bool dump = data->debug_enabled;
+
+ if (report_id == MXT_RPTID_NOMSG)
+ return 0;
+
+ if (report_id == data->T6_reportid) {
+ mxt_proc_t6_messages(data, message);
+ } else if (report_id >= data->T9_reportid_min
+ && report_id <= data->T9_reportid_max) {
+ mxt_proc_t9_message(data, message);
+ } else if (report_id == data->T19_reportid) {
+ mxt_input_button(data, message);
+ data->update_input = true;
+ } else {
+ dump = true;
+ }
+
+ if (dump)
+ mxt_dump_message(data, message);
+
+ return 1;
}
-static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+static int mxt_read_and_process_message(struct mxt_data *data)
{
- u8 *message = &data->msg_buf[0];
struct device *dev = &data->client->dev;
- u8 reportid;
- bool update_input = false;
- bool dump;
+ int ret;
- do {
- if (mxt_read_message(data, message)) {
- dev_err(dev, "Failed to read message\n");
- return IRQ_NONE;
- }
+ ret = __mxt_read_reg(data->client, data->T5_address,
+ data->T5_msg_size, data->msg_buf);
+ if (ret) {
+ dev_err(dev, "Error %d reading message\n", ret);
+ return ret;
+ }
- reportid = message[0];
- dump = data->debug_enabled;
-
- if (reportid == data->T6_reportid) {
- mxt_proc_t6_messages(data, message);
- } else if (mxt_is_T9_message(data, message)) {
- mxt_input_touchevent(data, message);
- update_input = true;
- } else if (reportid == data->T19_reportid) {
- mxt_input_button(data, message);
- update_input = true;
- } else {
- dump = true;
- }
+ return mxt_proc_message(data, data->msg_buf);
+}
- if (dump)
- mxt_dump_message(data, message);
- } while (reportid != MXT_RPTID_NOMSG);
+static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+{
+ int ret;
+
+ do {
+ ret = mxt_read_and_process_message(data);
+ if (ret < 0)
+ return IRQ_NONE;
+ } while (ret > 0);
- if (data->enable_reporting && update_input)
+ if (data->enable_reporting && data->update_input) {
mxt_input_sync(data->input_dev);
+ data->update_input = false;
+ }
return IRQ_HANDLED;
}
@@ -1263,21 +1267,19 @@ static int mxt_make_highchg(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
int count = 10;
- int error;
+ int ret;
- /* Read dummy message to make high CHG pin */
+ /* Read messages until we force an invalid */
do {
- error = mxt_read_message(data, data->msg_buf);
- if (error)
- return error;
- } while (data->msg_buf[0] != MXT_RPTID_NOMSG && --count);
-
- if (!count) {
- dev_err(dev, "CHG pin isn't cleared\n");
- return -EBUSY;
- }
+ ret = mxt_read_and_process_message(data);
+ if (ret == 0)
+ return 0;
+ else if (ret < 0)
+ return ret;
+ } while (--count);
- return 0;
+ dev_err(dev, "CHG pin isn't cleared\n");
+ return -EBUSY;
}
static int mxt_acquire_irq(struct mxt_data *data)
@@ -1314,6 +1316,7 @@ static void mxt_free_object_table(struct mxt_data *data)
kfree(data->msg_buf);
data->msg_buf = NULL;
data->enable_reporting = false;
+ data->T5_address = 0;
data->T5_msg_size = 0;
data->T6_reportid = 0;
data->T7_address = 0;
@@ -1366,6 +1369,7 @@ static int mxt_get_object_table(struct mxt_data *data)
case MXT_GEN_MESSAGE_T5:
/* CRC not enabled, therefore don't read last byte */
data->T5_msg_size = mxt_obj_size(object) - 1;
+ data->T5_address = object->start_address;
case MXT_GEN_COMMAND_T6:
data->T6_reportid = min_id;
data->T6_address = object->start_address;
--
1.7.10.4
next prev parent reply other threads:[~2013-06-05 17:48 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 17:36 Atmel updates to atmel_mxt_ts touch controller driver - v5 Daniel Kurtz <djkurtz@chromium.org>, Henrik Rydberg <rydberg@euromail.se>, Joonyoung Shim <jy0922.shim@samsung.com>, Alan.Bowens@atmel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, pmeerw@pmeerw.net, bleung@chromium.org, olofj@chromium.org Nick Dyer
2013-06-05 17:36 ` [PATCH 01/53] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-05 17:36 ` [PATCH 02/53] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-06-05 17:36 ` [PATCH 03/53] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-05 17:36 ` [PATCH 04/53] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-05 17:36 ` [PATCH 05/53] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-05 17:36 ` [PATCH 06/53] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-05 17:37 ` [PATCH 07/53] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-05 17:37 ` [PATCH 08/53] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-06-05 17:37 ` [PATCH 09/53] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-05 17:37 ` [PATCH 10/53] Input: atmel_mxt_ts - Add memory access interface via sysfs Nick Dyer
2013-06-05 17:57 ` Dmitry Torokhov
2013-06-05 18:45 ` Nick Dyer
2013-06-05 19:04 ` Dmitry Torokhov
2013-06-05 20:31 ` Nick Dyer
2013-06-05 21:07 ` Dmitry Torokhov
2013-06-05 21:36 ` Nick Dyer
2013-06-06 10:03 ` Mark Brown
2013-06-06 10:31 ` Nick Dyer
2013-06-06 10:55 ` Mark Brown
2013-06-06 11:17 ` Nick Dyer
2013-06-06 13:16 ` Mark Brown
2013-06-06 16:13 ` Nick Dyer
2013-06-06 16:46 ` Mark Brown
2013-06-07 15:12 ` Nick Dyer
2013-06-07 15:41 ` Mark Brown
2013-06-07 16:11 ` Nick Dyer
2013-06-07 16:47 ` Mark Brown
2013-06-11 10:39 ` Nick Dyer
2013-06-11 11:47 ` Mark Brown
2013-06-11 12:16 ` Nick Dyer
2013-06-19 18:59 ` Mark Brown
2013-06-21 16:16 ` Nick Dyer
2013-07-02 10:11 ` Mark Brown
2013-07-11 7:41 ` Nick Dyer
2013-07-11 10:30 ` Mark Brown
2013-06-06 9:48 ` Mark Brown
2013-06-06 10:40 ` Nick Dyer
2013-06-06 10:46 ` Mark Brown
2013-06-06 11:00 ` Nick Dyer
2013-06-06 11:14 ` Mark Brown
2013-06-06 11:34 ` Nick Dyer
2013-06-06 13:21 ` Mark Brown
2013-06-06 18:01 ` Greg KH
2013-06-07 14:47 ` Nick Dyer
2013-06-05 17:37 ` [PATCH 11/53] Input: atmel_mxt_ts - Implement debug output for messages Nick Dyer
2013-06-05 17:37 ` [PATCH 12/53] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-05 17:37 ` [PATCH 13/53] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-06-05 17:37 ` [PATCH 14/53] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-06-05 17:37 ` [PATCH 15/53] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-05 17:37 ` [PATCH 16/53] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-05 17:37 ` [PATCH 17/53] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-05 17:37 ` [PATCH 18/53] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-05 17:37 ` [PATCH 19/53] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-05 17:37 ` [PATCH 20/53] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-05 17:37 ` [PATCH 21/53] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-05 17:37 ` [PATCH 22/53] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-06-05 17:37 ` [PATCH 23/53] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-05 17:37 ` [PATCH 24/53] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-06-05 17:37 ` [PATCH 25/53] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-05 17:37 ` [PATCH 26/53] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-05 17:37 ` [PATCH 27/53] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-06-05 17:37 ` [PATCH 28/53] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-06-05 17:37 ` [PATCH 29/53] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-05 17:37 ` [PATCH 30/53] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-05 17:37 ` [PATCH 31/53] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-05 17:37 ` [PATCH 32/53] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-05 17:37 ` [PATCH 33/53] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-05 17:37 ` [PATCH 34/53] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-05 17:37 ` Nick Dyer [this message]
2013-06-05 17:37 ` [PATCH 36/53] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-05 17:37 ` [PATCH 37/53] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-05 17:37 ` [PATCH 38/53] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-05 17:37 ` [PATCH 39/53] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-06-05 17:37 ` [PATCH 40/53] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-05 17:37 ` [PATCH 41/53] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-06-05 17:37 ` [PATCH 42/53] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-05 17:37 ` [PATCH 43/53] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-05 17:37 ` [PATCH 44/53] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-07 18:37 ` Yufeng Shen
2013-06-10 9:35 ` Nick Dyer
2013-06-05 17:37 ` [PATCH 45/53] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-05 17:37 ` [PATCH 46/53] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-06-05 17:37 ` [PATCH 47/53] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-06-05 17:37 ` [PATCH 48/53] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-05 17:37 ` [PATCH 49/53] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-05 17:37 ` [PATCH 50/53] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-05 17:37 ` [PATCH 51/53] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-05 17:37 ` [PATCH 52/53] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-05 17:37 ` [PATCH 53/53] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-06 19:18 ` Atmel updates to atmel_mxt_ts touch controller driver - v5 Daniel Kurtz <djkurtz@chromium.org>, Henrik Rydberg <rydberg@euromail.se>, Joonyoung Shim <jy0922.shim@samsung.com>, Alan.Bowens@atmel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, pmeerw@pmeerw.net, bleung@chromium.org, olofj@chromium.org Dmitry Torokhov
[not found] ` <CAPDwgkPdtj0Th8P+y9e5O7swARfzS40sG1A3Ba=pAmeXfMx0Dw@mail.gmail.com>
2013-06-06 19:46 ` Dmitry Torokhov
2013-06-07 20:21 ` Yufeng Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370453866-16534-36-git-send-email-nick.dyer@itdev.co.uk \
--to=nick.dyer@itdev.co.uk \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®