mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan.Bowens@atmel.com, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org, pmeerw@pmeerw.net,
	bleung@chromium.org, olofj@chromium.org
Cc: Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 06/53] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader
Date: Wed,  5 Jun 2013 18:36:59 +0100	[thread overview]
Message-ID: <1370453866-16534-7-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1370453866-16534-1-git-send-email-nick.dyer@itdev.co.uk>

From: Benson Leung <bleung@chromium.org>

The driver should not immediately read bootloader status when
in Application Update Mode. The CHG line will assert when the device
has made a state transition and is ready to report a new status
via i2c.

This change adds a wait for completion in mxt_check_bootloader,
and changes the mxt_interrupt handler to signal the completion.

Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |  102 ++++++++++++++++++++++++------
 1 file changed, 81 insertions(+), 21 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 7de3b47..3f75e8c 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -15,6 +15,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
@@ -247,16 +248,19 @@ struct mxt_data {
 	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
-
 	unsigned int irq;
 	unsigned int max_x;
 	unsigned int max_y;
+	bool in_bootloader;
 
 	/* Cached parameters from object table */
 	u8 T6_reportid;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
 	u8 T19_reportid;
+
+	/* for fw update in bootloader */
+	struct completion bl_completion;
 };
 
 static inline size_t mxt_obj_size(const struct mxt_object *obj)
@@ -340,12 +344,51 @@ static void mxt_dump_message(struct device *dev,
 		message->reportid, 7, message->message);
 }
 
-static int mxt_check_bootloader(struct i2c_client *client,
-				     unsigned int state)
+static int mxt_wait_for_chg(struct mxt_data *data, unsigned int timeout_ms)
+{
+	struct device *dev = &data->client->dev;
+	struct completion *comp = &data->bl_completion;
+	unsigned long timeout = msecs_to_jiffies(timeout_ms);
+	long ret;
+
+	ret = wait_for_completion_interruptible_timeout(comp, timeout);
+	if (ret < 0) {
+		dev_err(dev, "Wait for completion interrupted.\n");
+		return -EINTR;
+	} else if (ret == 0) {
+		dev_err(dev, "Wait for completion timed out.\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
 {
+	struct i2c_client *client = data->client;
 	u8 val;
+	int ret;
 
 recheck:
+	if (state != MXT_WAITING_BOOTLOAD_CMD) {
+		/*
+		 * In application update mode, the interrupt
+		 * line signals state transitions. We must wait for the
+		 * CHG assertion before reading the status byte.
+		 * Once the status byte has been read, the line is deasserted.
+		 */
+		ret = mxt_wait_for_chg(data, 300);
+		if (ret) {
+			/*
+			 * TODO: handle -EINTR better by terminating fw update
+			 * process before returning to userspace by writing
+			 * length 0x000 to device (iff we are in
+			 * WAITING_FRAME_DATA state).
+			 */
+			dev_err(&client->dev, "Update wait error %d\n", ret);
+			return ret;
+		}
+	}
+
 	if (i2c_master_recv(client, &val, 1) != 1) {
 		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
 		return -EIO;
@@ -591,9 +634,8 @@ static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
 	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
 }
 
-static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
 {
-	struct mxt_data *data = dev_id;
 	struct mxt_message message;
 	const u8 *payload = &message.message[0];
 	struct device *dev = &data->client->dev;
@@ -633,6 +675,19 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+{
+	struct mxt_data *data = dev_id;
+
+	if (data->in_bootloader) {
+		/* bootloader state transition completion */
+		complete(&data->bl_completion);
+		return IRQ_HANDLED;
+	}
+
+	return mxt_process_messages_until_invalid(data);
+}
+
 static int mxt_check_reg_init(struct mxt_data *data)
 {
 	const struct mxt_platform_data *pdata = data->pdata;
@@ -948,6 +1003,8 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 	}
 
 	/* Change to the bootloader mode */
+	data->in_bootloader = true;
+
 	mxt_write_object(data, MXT_GEN_COMMAND_T6,
 			MXT_COMMAND_RESET, MXT_BOOT_VALUE);
 	msleep(MXT_RESET_TIME);
@@ -958,18 +1015,19 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 	else
 		client->addr = MXT_BOOT_HIGH;
 
-	ret = mxt_check_bootloader(client, MXT_WAITING_BOOTLOAD_CMD);
+	INIT_COMPLETION(data->bl_completion);
+
+	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
 	if (ret)
-		goto out;
+		goto disable_irq;
 
 	/* Unlock bootloader */
 	mxt_unlock_bootloader(client);
 
 	while (pos < fw->size) {
-		ret = mxt_check_bootloader(client,
-						MXT_WAITING_FRAME_DATA);
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
 		if (ret)
-			goto out;
+			goto disable_irq;
 
 		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
 
@@ -981,17 +1039,19 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		/* Write one frame to device */
 		mxt_fw_write(client, fw->data + pos, frame_size);
 
-		ret = mxt_check_bootloader(client,
-						MXT_FRAME_CRC_PASS);
+		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
 		if (ret)
-			goto out;
+			goto disable_irq;
 
 		pos += frame_size;
 
 		dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
 	}
 
-out:
+	data->in_bootloader = false;
+
+disable_irq:
+	disable_irq(data->irq);
 	release_firmware(fw);
 
 	/* Change to slave address of application */
@@ -1010,8 +1070,6 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	struct mxt_data *data = dev_get_drvdata(dev);
 	int error;
 
-	disable_irq(data->irq);
-
 	error = mxt_load_fw(dev, MXT_FW_NAME);
 	if (error) {
 		dev_err(dev, "The firmware update failed(%d)\n", error);
@@ -1025,13 +1083,13 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 		mxt_free_object_table(data);
 
 		mxt_initialize(data);
-	}
 
-	enable_irq(data->irq);
+		enable_irq(data->irq);
 
-	error = mxt_make_highchg(data);
-	if (error)
-		return error;
+		error = mxt_make_highchg(data);
+		if (error)
+			return error;
+	}
 
 	return count;
 }
@@ -1121,6 +1179,8 @@ static int mxt_probe(struct i2c_client *client,
 	data->pdata = pdata;
 	data->irq = client->irq;
 
+	init_completion(&data->bl_completion);
+
 	mxt_calc_resolution(data);
 
 	error = mxt_initialize(data);
-- 
1.7.10.4


  parent reply	other threads:[~2013-06-05 17:49 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-05 17:36 Atmel updates to atmel_mxt_ts touch controller driver - v5 Daniel Kurtz <djkurtz@chromium.org>, Henrik Rydberg <rydberg@euromail.se>, Joonyoung Shim <jy0922.shim@samsung.com>, Alan.Bowens@atmel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, pmeerw@pmeerw.net, bleung@chromium.org, olofj@chromium.org Nick Dyer
2013-06-05 17:36 ` [PATCH 01/53] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-05 17:36 ` [PATCH 02/53] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-06-05 17:36 ` [PATCH 03/53] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-05 17:36 ` [PATCH 04/53] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-05 17:36 ` [PATCH 05/53] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-05 17:36 ` Nick Dyer [this message]
2013-06-05 17:37 ` [PATCH 07/53] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-05 17:37 ` [PATCH 08/53] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-06-05 17:37 ` [PATCH 09/53] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-05 17:37 ` [PATCH 10/53] Input: atmel_mxt_ts - Add memory access interface via sysfs Nick Dyer
2013-06-05 17:57   ` Dmitry Torokhov
2013-06-05 18:45     ` Nick Dyer
2013-06-05 19:04       ` Dmitry Torokhov
2013-06-05 20:31         ` Nick Dyer
2013-06-05 21:07           ` Dmitry Torokhov
2013-06-05 21:36             ` Nick Dyer
2013-06-06 10:03               ` Mark Brown
2013-06-06 10:31                 ` Nick Dyer
2013-06-06 10:55                   ` Mark Brown
2013-06-06 11:17                     ` Nick Dyer
2013-06-06 13:16                       ` Mark Brown
2013-06-06 16:13                         ` Nick Dyer
2013-06-06 16:46                           ` Mark Brown
2013-06-07 15:12                             ` Nick Dyer
2013-06-07 15:41                               ` Mark Brown
2013-06-07 16:11                                 ` Nick Dyer
2013-06-07 16:47                                   ` Mark Brown
2013-06-11 10:39                                     ` Nick Dyer
2013-06-11 11:47                                       ` Mark Brown
2013-06-11 12:16                                         ` Nick Dyer
2013-06-19 18:59                                           ` Mark Brown
2013-06-21 16:16                                             ` Nick Dyer
2013-07-02 10:11                                               ` Mark Brown
2013-07-11  7:41                                                 ` Nick Dyer
2013-07-11 10:30                                                   ` Mark Brown
2013-06-06  9:48             ` Mark Brown
2013-06-06 10:40               ` Nick Dyer
2013-06-06 10:46                 ` Mark Brown
2013-06-06 11:00                   ` Nick Dyer
2013-06-06 11:14                     ` Mark Brown
2013-06-06 11:34                       ` Nick Dyer
2013-06-06 13:21                         ` Mark Brown
2013-06-06 18:01   ` Greg KH
2013-06-07 14:47     ` Nick Dyer
2013-06-05 17:37 ` [PATCH 11/53] Input: atmel_mxt_ts - Implement debug output for messages Nick Dyer
2013-06-05 17:37 ` [PATCH 12/53] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-05 17:37 ` [PATCH 13/53] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-06-05 17:37 ` [PATCH 14/53] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-06-05 17:37 ` [PATCH 15/53] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-05 17:37 ` [PATCH 16/53] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-05 17:37 ` [PATCH 17/53] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-05 17:37 ` [PATCH 18/53] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-05 17:37 ` [PATCH 19/53] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-05 17:37 ` [PATCH 20/53] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-05 17:37 ` [PATCH 21/53] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-05 17:37 ` [PATCH 22/53] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-06-05 17:37 ` [PATCH 23/53] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-05 17:37 ` [PATCH 24/53] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-06-05 17:37 ` [PATCH 25/53] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-05 17:37 ` [PATCH 26/53] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-05 17:37 ` [PATCH 27/53] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-06-05 17:37 ` [PATCH 28/53] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-06-05 17:37 ` [PATCH 29/53] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-05 17:37 ` [PATCH 30/53] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-05 17:37 ` [PATCH 31/53] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-05 17:37 ` [PATCH 32/53] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-05 17:37 ` [PATCH 33/53] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-05 17:37 ` [PATCH 34/53] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-05 17:37 ` [PATCH 35/53] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-05 17:37 ` [PATCH 36/53] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-05 17:37 ` [PATCH 37/53] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-05 17:37 ` [PATCH 38/53] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-05 17:37 ` [PATCH 39/53] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-06-05 17:37 ` [PATCH 40/53] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-05 17:37 ` [PATCH 41/53] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-06-05 17:37 ` [PATCH 42/53] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-05 17:37 ` [PATCH 43/53] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-05 17:37 ` [PATCH 44/53] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-07 18:37   ` Yufeng Shen
2013-06-10  9:35     ` Nick Dyer
2013-06-05 17:37 ` [PATCH 45/53] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-05 17:37 ` [PATCH 46/53] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-06-05 17:37 ` [PATCH 47/53] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-06-05 17:37 ` [PATCH 48/53] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-05 17:37 ` [PATCH 49/53] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-05 17:37 ` [PATCH 50/53] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-05 17:37 ` [PATCH 51/53] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-05 17:37 ` [PATCH 52/53] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-05 17:37 ` [PATCH 53/53] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-06 19:18 ` Atmel updates to atmel_mxt_ts touch controller driver - v5 Daniel Kurtz <djkurtz@chromium.org>, Henrik Rydberg <rydberg@euromail.se>, Joonyoung Shim <jy0922.shim@samsung.com>, Alan.Bowens@atmel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, pmeerw@pmeerw.net, bleung@chromium.org, olofj@chromium.org Dmitry Torokhov
     [not found]   ` <CAPDwgkPdtj0Th8P+y9e5O7swARfzS40sG1A3Ba=pAmeXfMx0Dw@mail.gmail.com>
2013-06-06 19:46     ` Dmitry Torokhov
2013-06-07 20:21       ` Yufeng Shen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370453866-16534-7-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome