mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <Ryan.Wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<claudiu.beznea@tuxon.dev>
Cc: <varshini.rajendran@microchip.com>, <linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <robh@kernel.org>
Subject: [PATCH v3 20/32] clk: at91: clk-slow: add support for parent_hw
Date: Thu, 10 Jul 2025 13:07:13 -0700	[thread overview]
Message-ID: <1450fe7c64df3fb1b3123633c5edce6708a5a5d6.1752176711.git.Ryan.Wanner@microchip.com> (raw)
In-Reply-To: <cover.1752176711.git.Ryan.Wanner@microchip.com>

From: Claudiu Beznea <claudiu.beznea@tuxon.dev>

Add support for parent_hw in slow clock drivers. With this parent-child
relation is described with pointers rather than strings making
registration a bit faster.

All the SoC based drivers that rely on clk-slow were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
 drivers/clk/at91/at91sam9260.c | 2 +-
 drivers/clk/at91/clk-slow.c    | 8 ++++++--
 drivers/clk/at91/dt-compat.c   | 2 +-
 drivers/clk/at91/pmc.h         | 1 +
 4 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index f39deb3ec00a..55350331b07e 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -385,7 +385,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
 		parent_names[0] = "slow_rc_osc";
 		parent_names[1] = "slow_xtal";
 		hw = at91_clk_register_sam9260_slow(regmap, "slck",
-						    parent_names, 2);
+						    parent_names, NULL, 2);
 		if (IS_ERR(hw))
 			goto err_free;
 
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
index ac9f7a48b76e..5b7fc6210e09 100644
--- a/drivers/clk/at91/clk-slow.c
+++ b/drivers/clk/at91/clk-slow.c
@@ -39,11 +39,12 @@ struct clk_hw * __init
 at91_clk_register_sam9260_slow(struct regmap *regmap,
 			       const char *name,
 			       const char **parent_names,
+			       struct clk_parent_data *parent_data,
 			       int num_parents)
 {
 	struct clk_sam9260_slow *slowck;
 	struct clk_hw *hw;
-	struct clk_init_data init;
+	struct clk_init_data init = {};
 	int ret;
 
 	if (!name)
@@ -58,7 +59,10 @@ at91_clk_register_sam9260_slow(struct regmap *regmap,
 
 	init.name = name;
 	init.ops = &sam9260_slow_ops;
-	init.parent_names = parent_names;
+	if (parent_data)
+		init.parent_data = (const struct clk_parent_data *)&parent_data;
+	else
+		init.parent_names = parent_names;
 	init.num_parents = num_parents;
 	init.flags = 0;
 
diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
index 5afd7c9f53fd..fa8658d3be7b 100644
--- a/drivers/clk/at91/dt-compat.c
+++ b/drivers/clk/at91/dt-compat.c
@@ -823,7 +823,7 @@ static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	hw = at91_clk_register_sam9260_slow(regmap, name, parent_names,
+	hw = at91_clk_register_sam9260_slow(regmap, name, parent_names, NULL,
 					    num_parents);
 	if (IS_ERR(hw))
 		return;
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index e5ab2fb3bc89..24c32e42f264 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -273,6 +273,7 @@ struct clk_hw * __init
 at91_clk_register_sam9260_slow(struct regmap *regmap,
 			       const char *name,
 			       const char **parent_names,
+			       struct clk_parent_data *parent_data,
 			       int num_parents);
 
 struct clk_hw * __init
-- 
2.43.0


  parent reply	other threads:[~2025-07-10 20:07 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-10 20:06 [PATCH v3 00/32] clk: at91: add support for parent_data and Ryan.Wanner
2025-07-10 20:06 ` [PATCH v3 01/32] clk: at91: pmc: add macros for clk_parent_data Ryan.Wanner
2025-08-28 16:52   ` Brian Masney
2025-09-06 18:33   ` claudiu beznea
2025-09-16  1:21     ` Stephen Boyd
2025-07-10 20:06 ` [PATCH v3 02/32] clk: at91: pmc: Move macro to header file Ryan.Wanner
2025-08-28 16:53   ` Brian Masney
2025-07-10 20:06 ` [PATCH v3 03/32] clk: at91: sam9x75: switch to parent_hw and parent_data Ryan.Wanner
2025-08-28 17:38   ` Brian Masney
2025-09-06 18:33   ` Claudiu Beznea
2025-07-10 20:06 ` [PATCH v3 04/32] clk: at91: clk-sam9x60-pll: use clk_parent_data Ryan.Wanner
2025-08-28 17:04   ` Brian Masney
2025-09-06 18:34   ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 05/32] clk: at91: clk-peripheral: switch to clk_parent_data Ryan.Wanner
2025-09-06 18:34   ` claudiu beznea
2025-07-10 20:06 ` [PATCH v3 06/32] clk: at91: clk-main: switch to clk parent data Ryan.Wanner
2025-09-06 18:35   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 07/32] clk: at91: clk-utmi: use clk_parent_data Ryan.Wanner
2025-09-06 18:36   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 08/32] clk: at91: clk-master: " Ryan.Wanner
2025-09-06 18:36   ` claudiu beznea
2025-09-16 17:35     ` Ryan Wanner
2025-09-17  6:49       ` Claudiu Beznea
2025-07-10 20:07 ` [PATCH v3 09/32] clk: at91: clk-programmable: " Ryan.Wanner
2025-09-06 18:36   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 10/32] clk: at91: clk-generated: " Ryan.Wanner
2025-09-06 18:37   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 11/32] clk: at91: clk-usb: add support for clk_parent_data Ryan.Wanner
2025-09-06 18:37   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 12/32] clk: at91: clk-system: use clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 13/32] clk: at91: sama7d65: switch to parent_hw and parent_data Ryan.Wanner
2025-09-06 18:39   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 14/32] clk: at91: clk-pll: add support for parent_hw Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 15/32] clk: at91: clk-audio-pll: " Ryan.Wanner
2025-10-20 19:18   ` Claudiu Beznea
2025-07-10 20:07 ` [PATCH v3 16/32] clk: at91: clk-plldiv: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 17/32] clk: at91: clk-h32mx: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 18/32] clk: at91: clk-i2s-mux: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 19/32] clk: at91: clk-smd: add support for clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` Ryan.Wanner [this message]
2025-07-10 20:07 ` [PATCH v3 21/32] clk: at91: dt-compat: switch to parent_hw and parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 22/32] clk: at91: sam9x60: " Ryan.Wanner
2025-09-06 18:46   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 23/32] clk: at91: sama5d2: " Ryan.Wanner
2025-09-06 18:48   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 24/32] clk: at91: sama5d3: " Ryan.Wanner
2025-09-06 18:49   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 25/32] clk: at91: sama5d4: " Ryan.Wanner
2025-09-06 18:51   ` claudiu beznea
2025-07-10 20:07 ` [PATCH v3 26/32] clk: at91: at91sam9x5: " Ryan.Wanner
     [not found]   ` <10f016fd-2ceb-40b0-a81d-9c5663f65191@tuxon.dev>
2025-09-06 18:52     ` Claudiu Beznea
2025-07-10 20:07 ` [PATCH v3 27/32] clk: at91: at91rm9200: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 28/32] clk: at91: at91sam9260: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 29/32] clk: at91: at91sam9g45: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 30/32] clk: at91: at91sam9n12: " Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 31/32] clk: at91: at91sam9rl: switch to clk_parent_data Ryan.Wanner
2025-07-10 20:07 ` [PATCH v3 32/32] clk: at91: sam9x7: Clean up formatting Ryan.Wanner
2025-08-27 20:31 ` [PATCH v3 00/32] clk: at91: add support for parent_data and Ryan Wanner
2025-08-28 15:51 ` Brian Masney
2025-08-28 16:16   ` Ryan Wanner
2025-08-28 16:48     ` Brian Masney
2025-08-28 20:40       ` Konstantin Ryabitsev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450fe7c64df3fb1b3123633c5edce6708a5a5d6.1752176711.git.Ryan.Wanner@microchip.com \
    --to=ryan.wanner@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=varshini.rajendran@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®