[PATCH v5 01/17] phy: qcom-qmp: Fix phy pipe clock gating

[PATCH v5 01/17] phy: qcom-qmp: Fix phy pipe clock gating

[Manu Gautam]

From: Vivek Gautam <vivek.gautam@codeaurora.org>

Pipe clock comes out of the phy and is available as long as
the phy is turned on. Clock controller fails to gate this
clock after the phy is turned off and generates a warning.

/ # [   33.048561] gcc_usb3_phy_pipe_clk status stuck at 'on'
[   33.048585] ------------[ cut here ]------------
[   33.052621] WARNING: CPU: 1 PID: 18 at ../drivers/clk/qcom/clk-branch.c:97 clk_branch_wait+0xf0/0x108
[   33.057384] Modules linked in:
[   33.066497] CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G        W       4.12.0-rc7-00024-gfe926e34c36d-dirty #96
[   33.069451] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
...
[   33.278565] [<ffff00000849b27c>] clk_branch_wait+0xf0/0x108
[   33.286375] [<ffff00000849b2f4>] clk_branch2_disable+0x28/0x34
[   33.291761] [<ffff0000084868dc>] clk_core_disable+0x5c/0x88
[   33.297660] [<ffff000008487d68>] clk_core_disable_lock+0x20/0x34
[   33.303129] [<ffff000008487d98>] clk_disable+0x1c/0x24
[   33.309384] [<ffff0000083ccd78>] qcom_qmp_phy_poweroff+0x20/0x48
[   33.314328] [<ffff0000083c53f4>] phy_power_off+0x80/0xdc
[   33.320492] [<ffff00000875c950>] dwc3_core_exit+0x94/0xa0
[   33.325784] [<ffff00000875c9ac>] dwc3_suspend_common+0x50/0x60
[   33.331080] [<ffff00000875ca04>] dwc3_runtime_suspend+0x48/0x6c
[   33.336810] [<ffff0000085b82f4>] pm_generic_runtime_suspend+0x28/0x38
[   33.342627] [<ffff0000085bace0>] __rpm_callback+0x150/0x254
[   33.349222] [<ffff0000085bae08>] rpm_callback+0x24/0x78
[   33.354604] [<ffff0000085b9fd8>] rpm_suspend+0xe0/0x4e4
[   33.359813] [<ffff0000085bb784>] pm_runtime_work+0xdc/0xf0
[   33.365028] [<ffff0000080d7b30>] process_one_work+0x12c/0x28c
[   33.370576] [<ffff0000080d7ce8>] worker_thread+0x58/0x3b8
[   33.376393] [<ffff0000080dd4a8>] kthread+0x100/0x12c
[   33.381776] [<ffff0000080836c0>] ret_from_fork+0x10/0x50

Fix this by disabling it as the first thing in phy_exit().

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index e17f035..2526971 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -751,8 +751,6 @@ static int qcom_qmp_phy_poweroff(struct phy *phy)
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
 
-	clk_disable_unprepare(qphy->pipe_clk);
-
 	regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs);
 
 	return 0;
@@ -936,6 +934,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	int i = cfg->num_clks;
 
+	clk_disable_unprepare(qphy->pipe_clk);
+
 	/* PHY reset */
 	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 02/17] phy: qcom-qmp: Adapt to clk_bulk_* APIs

[Manu Gautam]

From: Vivek Gautam <vivek.gautam@codeaurora.org>

Move from using array of clocks to clk_bulk_* APIs that
are available now.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 50 ++++++++++++-------------------------
 1 file changed, 16 insertions(+), 34 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 2526971..5fed1ae 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -555,7 +555,7 @@ struct qcom_qmp {
 	struct device *dev;
 	void __iomem *serdes;
 
-	struct clk **clks;
+	struct clk_bulk_data *clks;
 	struct reset_control **resets;
 	struct regulator_bulk_data *vregs;
 
@@ -857,22 +857,19 @@ static int qcom_qmp_phy_init(struct phy *phy)
 	void __iomem *pcs = qphy->pcs;
 	void __iomem *status;
 	unsigned int mask, val;
-	int ret, i;
+	int ret;
 
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
 
-	for (i = 0; i < qmp->cfg->num_clks; i++) {
-		ret = clk_prepare_enable(qmp->clks[i]);
-		if (ret) {
-			dev_err(qmp->dev, "failed to enable %s clk, err=%d\n",
-				qmp->cfg->clk_list[i], ret);
-			goto err_clk;
-		}
+	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+		return ret;
 	}
 
 	ret = qcom_qmp_phy_com_init(qmp);
 	if (ret)
-		goto err_clk;
+		goto err_com_init;
 
 	if (cfg->has_lane_rst) {
 		ret = reset_control_deassert(qphy->lane_rst);
@@ -920,9 +917,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		reset_control_assert(qphy->lane_rst);
 err_lane_rst:
 	qcom_qmp_phy_com_exit(qmp);
-err_clk:
-	while (--i >= 0)
-		clk_disable_unprepare(qmp->clks[i]);
+err_com_init:
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
 
 	return ret;
 }
@@ -932,7 +928,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	int i = cfg->num_clks;
 
 	clk_disable_unprepare(qphy->pipe_clk);
 
@@ -950,8 +945,7 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 
 	qcom_qmp_phy_com_exit(qmp);
 
-	while (--i >= 0)
-		clk_disable_unprepare(qmp->clks[i]);
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
 
 	return 0;
 }
@@ -1000,29 +994,17 @@ static int qcom_qmp_phy_reset_init(struct device *dev)
 static int qcom_qmp_phy_clk_init(struct device *dev)
 {
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
-	int ret, i;
+	int num = qmp->cfg->num_clks;
+	int i;
 
-	qmp->clks = devm_kcalloc(dev, qmp->cfg->num_clks,
-				 sizeof(*qmp->clks), GFP_KERNEL);
+	qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
 	if (!qmp->clks)
 		return -ENOMEM;
 
-	for (i = 0; i < qmp->cfg->num_clks; i++) {
-		struct clk *_clk;
-		const char *name = qmp->cfg->clk_list[i];
-
-		_clk = devm_clk_get(dev, name);
-		if (IS_ERR(_clk)) {
-			ret = PTR_ERR(_clk);
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "failed to get %s clk, %d\n",
-					name, ret);
-			return ret;
-		}
-		qmp->clks[i] = _clk;
-	}
+	for (i = 0; i < num; i++)
+		qmp->clks[i].id = qmp->cfg->clk_list[i];
 
-	return 0;
+	return devm_clk_bulk_get(dev, num, qmp->clks);
 }
 
 /*
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 03/17] phy: qcom-qmp: Power-on PHY before initialization

[Manu Gautam]

PHY regulators which are enabled from power_on() must be ON
before turning-on clocks and initializing it as part of init().
As most of the core drivers perform power_on() after init(), move
PHY regulators enable to com_init() and use power_on() to
only enable pipe_clk. This pipe_clk is output from PHY and some
core drivers e.g. PCIe follow specific sequence after phy_init()
that mandates pipe_clk to be enabled from power_on() only.
On similar lines move clk_enable from init() to com_init() which
executes once for multi lane PHYs.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 61 +++++++++++++++----------------------
 1 file changed, 24 insertions(+), 37 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 5fed1ae..1b82cea 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -724,36 +724,13 @@ static int qcom_qmp_phy_poweron(struct phy *phy)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
-	int num = qmp->cfg->num_vregs;
 	int ret;
 
-	dev_vdbg(&phy->dev, "Powering on QMP phy\n");
-
-	/* turn on regulator supplies */
-	ret = regulator_bulk_enable(num, qmp->vregs);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
-		return ret;
-	}
-
 	ret = clk_prepare_enable(qphy->pipe_clk);
-	if (ret) {
+	if (ret)
 		dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret);
-		regulator_bulk_disable(num, qmp->vregs);
-		return ret;
-	}
 
-	return 0;
-}
-
-static int qcom_qmp_phy_poweroff(struct phy *phy)
-{
-	struct qmp_phy *qphy = phy_get_drvdata(phy);
-	struct qcom_qmp *qmp = qphy->qmp;
-
-	regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs);
-
-	return 0;
+	return ret;
 }
 
 static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
@@ -768,6 +745,19 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		return 0;
 	}
 
+	/* turn on regulator supplies */
+	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+		goto err_reg_enable;
+	}
+
+	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+		goto err_clk_enable;
+	}
+
 	for (i = 0; i < cfg->num_resets; i++) {
 		ret = reset_control_deassert(qmp->resets[i]);
 		if (ret) {
@@ -812,6 +802,10 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 err_rst:
 	while (--i >= 0)
 		reset_control_assert(qmp->resets[i]);
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+err_clk_enable:
+	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+err_reg_enable:
 	mutex_unlock(&qmp->phy_mutex);
 
 	return ret;
@@ -841,6 +835,10 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
 	while (--i >= 0)
 		reset_control_assert(qmp->resets[i]);
 
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
 	mutex_unlock(&qmp->phy_mutex);
 
 	return 0;
@@ -861,15 +859,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
 
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
 
-	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
-		return ret;
-	}
-
 	ret = qcom_qmp_phy_com_init(qmp);
 	if (ret)
-		goto err_com_init;
+		return ret;
 
 	if (cfg->has_lane_rst) {
 		ret = reset_control_deassert(qphy->lane_rst);
@@ -917,8 +909,6 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		reset_control_assert(qphy->lane_rst);
 err_lane_rst:
 	qcom_qmp_phy_com_exit(qmp);
-err_com_init:
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
 
 	return ret;
 }
@@ -945,8 +935,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 
 	qcom_qmp_phy_com_exit(qmp);
 
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
-
 	return 0;
 }
 
@@ -1060,7 +1048,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 	.init		= qcom_qmp_phy_init,
 	.exit		= qcom_qmp_phy_exit,
 	.power_on	= qcom_qmp_phy_poweron,
-	.power_off	= qcom_qmp_phy_poweroff,
 	.owner		= THIS_MODULE,
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 04/17] phy: qcom-qusb2: Power-on PHY before initialization

[Manu Gautam]

PHY must be powered on before turning ON clocks and
attempting to initialize it. Driver is exposing
separate init and power_on routines for this.
Apparently USB dwc3 core driver performs power-on
after init. Also, poweron and init for QUSB2 PHY
need to be executed together always, hence remove
poweron callback from phy_ops and explicitly perform
this from init, similar changes needed for poweroff.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 47 +++++++++++------------------------
 1 file changed, 15 insertions(+), 32 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 6c57524..4a5b2a1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -195,54 +195,31 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 	qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4);
 }
 
-static int qusb2_phy_poweron(struct phy *phy)
+static int qusb2_phy_init(struct phy *phy)
 {
 	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-	int num = ARRAY_SIZE(qphy->vregs);
+	unsigned int val;
+	unsigned int clk_scheme;
 	int ret;
 
-	dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__);
+	dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
 
 	/* turn on regulator supplies */
-	ret = regulator_bulk_enable(num, qphy->vregs);
+	ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
 	if (ret)
 		return ret;
 
 	ret = clk_prepare_enable(qphy->iface_clk);
 	if (ret) {
 		dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
-		regulator_bulk_disable(num, qphy->vregs);
-		return ret;
+		goto poweroff_phy;
 	}
 
-	return 0;
-}
-
-static int qusb2_phy_poweroff(struct phy *phy)
-{
-	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-
-	clk_disable_unprepare(qphy->iface_clk);
-
-	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
-
-	return 0;
-}
-
-static int qusb2_phy_init(struct phy *phy)
-{
-	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-	unsigned int val;
-	unsigned int clk_scheme;
-	int ret;
-
-	dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
-
 	/* enable ahb interface clock to program phy */
 	ret = clk_prepare_enable(qphy->cfg_ahb_clk);
 	if (ret) {
 		dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
-		return ret;
+		goto disable_iface_clk;
 	}
 
 	/* Perform phy reset */
@@ -344,6 +321,11 @@ static int qusb2_phy_init(struct phy *phy)
 	reset_control_assert(qphy->phy_reset);
 disable_ahb_clk:
 	clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+	clk_disable_unprepare(qphy->iface_clk);
+poweroff_phy:
+	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+
 	return ret;
 }
 
@@ -361,6 +343,9 @@ static int qusb2_phy_exit(struct phy *phy)
 	reset_control_assert(qphy->phy_reset);
 
 	clk_disable_unprepare(qphy->cfg_ahb_clk);
+	clk_disable_unprepare(qphy->iface_clk);
+
+	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
 
 	return 0;
 }
@@ -368,8 +353,6 @@ static int qusb2_phy_exit(struct phy *phy)
 static const struct phy_ops qusb2_phy_gen_ops = {
 	.init		= qusb2_phy_init,
 	.exit		= qusb2_phy_exit,
-	.power_on	= qusb2_phy_poweron,
-	.power_off	= qusb2_phy_poweroff,
 	.owner		= THIS_MODULE,
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 05/17] phy: qcom-qmp: Fix PHY block reset sequence

[Manu Gautam]

PHY block or asynchronous reset requires signal
to be asserted before de-asserting. Driver is only
de-asserting signal which is already low, hence
reset operation is a no-op. Fix this by asserting
signal first. Also, resetting requires PHY clocks
to be turned ON only after reset is finished. Fix
that as well.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 1b82cea..ecff261 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -752,13 +752,16 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		goto err_reg_enable;
 	}
 
-	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
-		goto err_clk_enable;
+	for (i = 0; i < cfg->num_resets; i++) {
+		ret = reset_control_assert(qmp->resets[i]);
+		if (ret) {
+			dev_err(qmp->dev, "%s reset assert failed\n",
+				cfg->reset_list[i]);
+			goto err_rst_assert;
+		}
 	}
 
-	for (i = 0; i < cfg->num_resets; i++) {
+	for (i = cfg->num_resets - 1; i >= 0; i--) {
 		ret = reset_control_deassert(qmp->resets[i]);
 		if (ret) {
 			dev_err(qmp->dev, "%s reset deassert failed\n",
@@ -767,6 +770,12 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		}
 	}
 
+	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+		goto err_rst;
+	}
+
 	if (cfg->has_phy_com_ctrl)
 		qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
 			     SW_PWRDN);
@@ -791,7 +800,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		if (ret) {
 			dev_err(qmp->dev,
 				"phy common block init timed-out\n");
-			goto err_rst;
+			goto err_com_init;
 		}
 	}
 
@@ -799,11 +808,12 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 
 	return 0;
 
+err_com_init:
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
 err_rst:
-	while (--i >= 0)
+	while (++i < cfg->num_resets)
 		reset_control_assert(qmp->resets[i]);
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
-err_clk_enable:
+err_rst_assert:
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
 err_reg_enable:
 	mutex_unlock(&qmp->phy_mutex);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 06/17] phy: qcom-qmp: Move SERDES/PCS START after PHY reset

[Manu Gautam]

Driver is currently performing PHY reset after starting
SERDES/PCS. As per hardware datasheet reset must be done
before starting PHY. Hence, update the sequence.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index ecff261..edb6bbe 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -896,12 +896,12 @@ static int qcom_qmp_phy_init(struct phy *phy)
 	if (cfg->has_pwrdn_delay)
 		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
 
-	/* start SerDes and Phy-Coding-Sublayer */
-	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
-
 	/* Pull PHY out of reset state */
 	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
+	/* start SerDes and Phy-Coding-Sublayer */
+	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
 	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
 	mask = cfg->mask_pcs_ready;
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 07/17] phy: qcom-qusb2: Add support for different register layouts

[Manu Gautam]

New version of QUSB2 PHY has some registers offset changed.
Add support to have register layout for a target and update
the same in phy_configuration.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 149 +++++++++++++++++++++++++---------
 1 file changed, 109 insertions(+), 40 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 4a5b2a1..b65635f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -37,17 +37,10 @@
 #define QUSB2PHY_PLL_AUTOPGM_CTL1	0x1c
 #define QUSB2PHY_PLL_PWR_CTRL		0x18
 
-#define QUSB2PHY_PLL_STATUS		0x38
+/* QUSB2PHY_PLL_STATUS register bits */
 #define PLL_LOCKED			BIT(5)
 
-#define QUSB2PHY_PORT_TUNE1		0x80
-#define QUSB2PHY_PORT_TUNE2		0x84
-#define QUSB2PHY_PORT_TUNE3		0x88
-#define QUSB2PHY_PORT_TUNE4		0x8c
-#define QUSB2PHY_PORT_TUNE5		0x90
-#define QUSB2PHY_PORT_TEST2		0x9c
-
-#define QUSB2PHY_PORT_POWERDOWN		0xb4
+/* QUSB2PHY_PORT_POWERDOWN register bits */
 #define CLAMP_N_EN			BIT(5)
 #define FREEZIO_N			BIT(1)
 #define POWER_DOWN			BIT(0)
@@ -59,6 +52,11 @@
 struct qusb2_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
+	/*
+	 * register part of layout ?
+	 * if yes, then offset gives index in the reg-layout
+	 */
+	int in_layout;
 };
 
 #define QUSB2_PHY_INIT_CFG(o, v) \
@@ -67,15 +65,50 @@ struct qusb2_phy_init_tbl {
 		.val = v,	\
 	}
 
+#define QUSB2_PHY_INIT_CFG_L(o, v) \
+	{			\
+		.offset = o,	\
+		.val = v,	\
+		.in_layout = 1,	\
+	}
+
+/* set of registers with offsets different per-PHY */
+enum qusb2phy_reg_layout {
+	QUSB2PHY_PLL_STATUS,
+	QUSB2PHY_PORT_TUNE1,
+	QUSB2PHY_PORT_TUNE2,
+	QUSB2PHY_PORT_TUNE3,
+	QUSB2PHY_PORT_TUNE4,
+	QUSB2PHY_PORT_TUNE5,
+	QUSB2PHY_PORT_TEST1,
+	QUSB2PHY_PORT_TEST2,
+	QUSB2PHY_PORT_POWERDOWN,
+	QUSB2PHY_INTR_CTRL,
+};
+
+static const unsigned int msm8996_regs_layout[] = {
+	[QUSB2PHY_PLL_STATUS]		= 0x38,
+	[QUSB2PHY_PORT_TUNE1]		= 0x80,
+	[QUSB2PHY_PORT_TUNE2]		= 0x84,
+	[QUSB2PHY_PORT_TUNE3]		= 0x88,
+	[QUSB2PHY_PORT_TUNE4]		= 0x8c,
+	[QUSB2PHY_PORT_TUNE5]		= 0x90,
+	[QUSB2PHY_PORT_TEST2]		= 0x9c,
+	[QUSB2PHY_PORT_POWERDOWN]	= 0xb4,
+};
+
 static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE1, 0xf8),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE2, 0xb3),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE3, 0x83),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE4, 0xc0),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0),
+
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TEST2, 0x14),
+
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
 };
@@ -86,11 +119,27 @@ struct qusb2_phy_cfg {
 	unsigned int tbl_num;
 	/* offset to PHY_CLK_SCHEME register in TCSR map */
 	unsigned int clk_scheme_offset;
+
+	/* array of registers with different offsets */
+	const unsigned int *regs;
+	unsigned int mask_core_ready;
+	unsigned int disable_ctrl;
+
+	/* true if PHY has PLL_TEST register to select clk_scheme */
+	bool has_pll_test;
+
+	/* true if TUNE1 register must be updated by fused value, else TUNE2 */
+	bool update_tune1_with_efuse;
 };
 
 static const struct qusb2_phy_cfg msm8996_phy_cfg = {
-	.tbl = msm8996_init_tbl,
-	.tbl_num = ARRAY_SIZE(msm8996_init_tbl),
+	.tbl		= msm8996_init_tbl,
+	.tbl_num	= ARRAY_SIZE(msm8996_init_tbl),
+	.regs		= msm8996_regs_layout,
+
+	.has_pll_test	= true,
+	.disable_ctrl	= (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+	.mask_core_ready = PLL_LOCKED,
 };
 
 static const char * const qusb2_phy_vreg_names[] = {
@@ -160,26 +209,32 @@ static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val)
 
 static inline
 void qcom_qusb2_phy_configure(void __iomem *base,
+			      const unsigned int *regs,
 			      const struct qusb2_phy_init_tbl tbl[], int num)
 {
 	int i;
 
-	for (i = 0; i < num; i++)
-		writel(tbl[i].val, base + tbl[i].offset);
+	for (i = 0; i < num; i++) {
+		if (tbl[i].in_layout)
+			writel(tbl[i].val, base + regs[tbl[i].offset]);
+		else
+			writel(tbl[i].val, base + tbl[i].offset);
+	}
 }
 
 /*
  * Fetches HS Tx tuning value from nvmem and sets the
- * QUSB2PHY_PORT_TUNE2 register.
+ * QUSB2PHY_PORT_TUNE1/2 register.
  * For error case, skip setting the value and use the default value.
  */
 static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 {
 	struct device *dev = &qphy->phy->dev;
+	const struct qusb2_phy_cfg *cfg = qphy->cfg;
 	u8 *val;
 
 	/*
-	 * Read efuse register having TUNE2 parameter's high nibble.
+	 * Read efuse register having TUNE2/1 parameter's high nibble.
 	 * If efuse register shows value as 0x0, or if we fail to find
 	 * a valid efuse register settings, then use default value
 	 * as 0xB for high nibble that we have already set while
@@ -191,14 +246,21 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 		return;
 	}
 
-	/* Fused TUNE2 value is the higher nibble only */
-	qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4);
+	/* Fused TUNE1/2 value is the higher nibble only */
+	if (cfg->update_tune1_with_efuse)
+		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+			      val[0] << 0x4);
+	else
+		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+			      val[0] << 0x4);
+
 }
 
 static int qusb2_phy_init(struct phy *phy)
 {
 	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-	unsigned int val;
+	const struct qusb2_phy_cfg *cfg = qphy->cfg;
+	unsigned int val = 0;
 	unsigned int clk_scheme;
 	int ret;
 
@@ -239,20 +301,23 @@ static int qusb2_phy_init(struct phy *phy)
 	}
 
 	/* Disable the PHY */
-	qusb2_setbits(qphy->base, QUSB2PHY_PORT_POWERDOWN,
-		      CLAMP_N_EN | FREEZIO_N | POWER_DOWN);
+	qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+		      qphy->cfg->disable_ctrl);
 
-	/* save reset value to override reference clock scheme later */
-	val = readl(qphy->base + QUSB2PHY_PLL_TEST);
+	if (cfg->has_pll_test) {
+		/* save reset value to override reference clock scheme later */
+		val = readl(qphy->base + QUSB2PHY_PLL_TEST);
+	}
 
-	qcom_qusb2_phy_configure(qphy->base, qphy->cfg->tbl,
-				 qphy->cfg->tbl_num);
+	qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl,
+				 cfg->tbl_num);
 
 	/* Set efuse value for tuning the PHY */
 	qusb2_phy_set_tune2_param(qphy);
 
 	/* Enable the PHY */
-	qusb2_clrbits(qphy->base, QUSB2PHY_PORT_POWERDOWN, POWER_DOWN);
+	qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+		      POWER_DOWN);
 
 	/* Required to get phy pll lock successfully */
 	usleep_range(150, 160);
@@ -285,27 +350,31 @@ static int qusb2_phy_init(struct phy *phy)
 	}
 
 	if (!qphy->has_se_clk_scheme) {
-		val &= ~CLK_REF_SEL;
 		ret = clk_prepare_enable(qphy->ref_clk);
 		if (ret) {
 			dev_err(&phy->dev, "failed to enable ref clk, %d\n",
 				ret);
 			goto assert_phy_reset;
 		}
-	} else {
-		val |= CLK_REF_SEL;
 	}
 
-	writel(val, qphy->base + QUSB2PHY_PLL_TEST);
+	if (cfg->has_pll_test) {
+		if (!qphy->has_se_clk_scheme)
+			val &= ~CLK_REF_SEL;
+		else
+			val |= CLK_REF_SEL;
+
+		writel(val, qphy->base + QUSB2PHY_PLL_TEST);
 
-	/* ensure above write is through */
-	readl(qphy->base + QUSB2PHY_PLL_TEST);
+		/* ensure above write is through */
+		readl(qphy->base + QUSB2PHY_PLL_TEST);
+	}
 
 	/* Required to get phy pll lock successfully */
 	usleep_range(100, 110);
 
-	val = readb(qphy->base + QUSB2PHY_PLL_STATUS);
-	if (!(val & PLL_LOCKED)) {
+	val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]);
+	if (!(val & cfg->mask_core_ready)) {
 		dev_err(&phy->dev,
 			"QUSB2PHY pll lock failed: status reg = %x\n", val);
 		ret = -EBUSY;
@@ -334,8 +403,8 @@ static int qusb2_phy_exit(struct phy *phy)
 	struct qusb2_phy *qphy = phy_get_drvdata(phy);
 
 	/* Disable the PHY */
-	qusb2_setbits(qphy->base, QUSB2PHY_PORT_POWERDOWN,
-		      CLAMP_N_EN | FREEZIO_N | POWER_DOWN);
+	qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+		      qphy->cfg->disable_ctrl);
 
 	if (!qphy->has_se_clk_scheme)
 		clk_disable_unprepare(qphy->ref_clk);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 08/17] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version

[Manu Gautam]

Update generic compatible string for QUSB2 V2 PHY. This will allow
all targets using QUSB2 V2 use same string.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index aa0fcb0..42c9742 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -4,7 +4,10 @@ Qualcomm QUSB2 phy controller
 QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
 
 Required properties:
- - compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
+ - compatible: compatible list, contains
+	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+	       "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
+
  - reg: offset and length of the PHY register set.
  - #phy-cells: must be 0.
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 09/17] phy: qcom-qusb2: Add support for QUSB2 V2 version

[Manu Gautam]

Use register layout to add additional registers present
on QUSB2 PHY V2 version for PHY initialization.
Other than new registers on V2, following two register's
offset and bit definitions are different: POWERDOWN control
and PLL_STATUS.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 64 +++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index b65635f..9b0d1ff 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -40,15 +40,34 @@
 /* QUSB2PHY_PLL_STATUS register bits */
 #define PLL_LOCKED			BIT(5)
 
+/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */
+#define CORE_READY_STATUS		BIT(0)
+
 /* QUSB2PHY_PORT_POWERDOWN register bits */
 #define CLAMP_N_EN			BIT(5)
 #define FREEZIO_N			BIT(1)
 #define POWER_DOWN			BIT(0)
 
+/* QUSB2PHY_PWR_CTRL1 register bits */
+#define PWR_CTRL1_VREF_SUPPLY_TRIM	BIT(5)
+#define PWR_CTRL1_CLAMP_N_EN		BIT(1)
+
 #define QUSB2PHY_REFCLK_ENABLE		BIT(0)
 
 #define PHY_CLK_SCHEME_SEL		BIT(0)
 
+#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO	0x04
+#define QUSB2PHY_PLL_CLOCK_INVERTERS		0x18c
+#define QUSB2PHY_PLL_CMODE			0x2c
+#define QUSB2PHY_PLL_LOCK_DELAY			0x184
+#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO		0xb4
+#define QUSB2PHY_PLL_BIAS_CONTROL_1		0x194
+#define QUSB2PHY_PLL_BIAS_CONTROL_2		0x198
+#define QUSB2PHY_PWR_CTRL2			0x214
+#define QUSB2PHY_IMP_CTRL1			0x220
+#define QUSB2PHY_IMP_CTRL2			0x224
+#define QUSB2PHY_CHG_CTRL2			0x23c
+
 struct qusb2_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
@@ -113,6 +132,38 @@ enum qusb2phy_reg_layout {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
 };
 
+static const unsigned int qusb2_v2_regs_layout[] = {
+	[QUSB2PHY_PLL_STATUS]		= 0x1a0,
+	[QUSB2PHY_PORT_TUNE1]		= 0x240,
+	[QUSB2PHY_PORT_TUNE2]		= 0x244,
+	[QUSB2PHY_PORT_TUNE3]		= 0x248,
+	[QUSB2PHY_PORT_TUNE4]		= 0x24c,
+	[QUSB2PHY_PORT_TUNE5]		= 0x250,
+	[QUSB2PHY_PORT_TEST2]		= 0x258,
+	[QUSB2PHY_PORT_POWERDOWN]	= 0x210,
+};
+
+static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
+
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
+
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
+};
+
 struct qusb2_phy_cfg {
 	const struct qusb2_phy_init_tbl *tbl;
 	/* number of entries in the table */
@@ -142,6 +193,16 @@ struct qusb2_phy_cfg {
 	.mask_core_ready = PLL_LOCKED,
 };
 
+static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
+	.tbl		= qusb2_v2_init_tbl,
+	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
+	.regs		= qusb2_v2_regs_layout,
+
+	.disable_ctrl	= (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
+			   POWER_DOWN),
+	.mask_core_ready = CORE_READY_STATUS,
+};
+
 static const char * const qusb2_phy_vreg_names[] = {
 	"vdda-pll", "vdda-phy-dpdm",
 };
@@ -429,6 +490,9 @@ static int qusb2_phy_exit(struct phy *phy)
 	{
 		.compatible	= "qcom,msm8996-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
+	}, {
+		.compatible	= "qcom,qusb2-v2-phy",
+		.data		= &qusb2_v2_phy_cfg,
 	},
 	{ },
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 10/17] phy: qcom-qmp: Move register offsets to header file

[Manu Gautam]

New revision (v3) of QMP PHY uses different offsets
for almost all of the registers. Hence, move these
definitions to header file so that updated offsets
can be added for QMP v3.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 119 +--------------------------------
 drivers/phy/qualcomm/phy-qcom-qmp.h | 128 ++++++++++++++++++++++++++++++++++++
 2 files changed, 129 insertions(+), 118 deletions(-)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index edb6bbe..2a1117b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -31,124 +31,7 @@
 
 #include <dt-bindings/phy/phy.h>
 
-/* QMP PHY QSERDES COM registers */
-#define QSERDES_COM_BG_TIMER				0x00c
-#define QSERDES_COM_SSC_EN_CENTER			0x010
-#define QSERDES_COM_SSC_ADJ_PER1			0x014
-#define QSERDES_COM_SSC_ADJ_PER2			0x018
-#define QSERDES_COM_SSC_PER1				0x01c
-#define QSERDES_COM_SSC_PER2				0x020
-#define QSERDES_COM_SSC_STEP_SIZE1			0x024
-#define QSERDES_COM_SSC_STEP_SIZE2			0x028
-#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN			0x034
-#define QSERDES_COM_CLK_ENABLE1				0x038
-#define QSERDES_COM_SYS_CLK_CTRL			0x03c
-#define QSERDES_COM_SYSCLK_BUF_ENABLE			0x040
-#define QSERDES_COM_PLL_IVCO				0x048
-#define QSERDES_COM_LOCK_CMP1_MODE0			0x04c
-#define QSERDES_COM_LOCK_CMP2_MODE0			0x050
-#define QSERDES_COM_LOCK_CMP3_MODE0			0x054
-#define QSERDES_COM_LOCK_CMP1_MODE1			0x058
-#define QSERDES_COM_LOCK_CMP2_MODE1			0x05c
-#define QSERDES_COM_LOCK_CMP3_MODE1			0x060
-#define QSERDES_COM_BG_TRIM				0x070
-#define QSERDES_COM_CLK_EP_DIV				0x074
-#define QSERDES_COM_CP_CTRL_MODE0			0x078
-#define QSERDES_COM_CP_CTRL_MODE1			0x07c
-#define QSERDES_COM_PLL_RCTRL_MODE0			0x084
-#define QSERDES_COM_PLL_RCTRL_MODE1			0x088
-#define QSERDES_COM_PLL_CCTRL_MODE0			0x090
-#define QSERDES_COM_PLL_CCTRL_MODE1			0x094
-#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
-#define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
-#define QSERDES_COM_RESETSM_CNTRL			0x0b4
-#define QSERDES_COM_RESTRIM_CTRL			0x0bc
-#define QSERDES_COM_RESCODE_DIV_NUM			0x0c4
-#define QSERDES_COM_LOCK_CMP_EN				0x0c8
-#define QSERDES_COM_LOCK_CMP_CFG			0x0cc
-#define QSERDES_COM_DEC_START_MODE0			0x0d0
-#define QSERDES_COM_DEC_START_MODE1			0x0d4
-#define QSERDES_COM_DIV_FRAC_START1_MODE0		0x0dc
-#define QSERDES_COM_DIV_FRAC_START2_MODE0		0x0e0
-#define QSERDES_COM_DIV_FRAC_START3_MODE0		0x0e4
-#define QSERDES_COM_DIV_FRAC_START1_MODE1		0x0e8
-#define QSERDES_COM_DIV_FRAC_START2_MODE1		0x0ec
-#define QSERDES_COM_DIV_FRAC_START3_MODE1		0x0f0
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0		0x108
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0		0x10c
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1		0x110
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1		0x114
-#define QSERDES_COM_VCO_TUNE_CTRL			0x124
-#define QSERDES_COM_VCO_TUNE_MAP			0x128
-#define QSERDES_COM_VCO_TUNE1_MODE0			0x12c
-#define QSERDES_COM_VCO_TUNE2_MODE0			0x130
-#define QSERDES_COM_VCO_TUNE1_MODE1			0x134
-#define QSERDES_COM_VCO_TUNE2_MODE1			0x138
-#define QSERDES_COM_VCO_TUNE_TIMER1			0x144
-#define QSERDES_COM_VCO_TUNE_TIMER2			0x148
-#define QSERDES_COM_BG_CTRL				0x170
-#define QSERDES_COM_CLK_SELECT				0x174
-#define QSERDES_COM_HSCLK_SEL				0x178
-#define QSERDES_COM_CORECLK_DIV				0x184
-#define QSERDES_COM_CORE_CLK_EN				0x18c
-#define QSERDES_COM_C_READY_STATUS			0x190
-#define QSERDES_COM_CMN_CONFIG				0x194
-#define QSERDES_COM_SVS_MODE_CLK_SEL			0x19c
-#define QSERDES_COM_DEBUG_BUS0				0x1a0
-#define QSERDES_COM_DEBUG_BUS1				0x1a4
-#define QSERDES_COM_DEBUG_BUS2				0x1a8
-#define QSERDES_COM_DEBUG_BUS3				0x1ac
-#define QSERDES_COM_DEBUG_BUS_SEL			0x1b0
-#define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
-
-/* QMP PHY TX registers */
-#define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
-#define QSERDES_TX_DEBUG_BUS_SEL			0x064
-#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068
-#define QSERDES_TX_LANE_MODE				0x094
-#define QSERDES_TX_RCV_DETECT_LVL_2			0x0ac
-
-/* QMP PHY RX registers */
-#define QSERDES_RX_UCDR_SO_GAIN_HALF			0x010
-#define QSERDES_RX_UCDR_SO_GAIN				0x01c
-#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN		0x040
-#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE	0x048
-#define QSERDES_RX_RX_TERM_BW				0x090
-#define QSERDES_RX_RX_EQ_GAIN1_LSB			0x0c4
-#define QSERDES_RX_RX_EQ_GAIN1_MSB			0x0c8
-#define QSERDES_RX_RX_EQ_GAIN2_LSB			0x0cc
-#define QSERDES_RX_RX_EQ_GAIN2_MSB			0x0d0
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d8
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3		0x0dc
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4		0x0e0
-#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x108
-#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x10c
-#define QSERDES_RX_SIGDET_ENABLES			0x110
-#define QSERDES_RX_SIGDET_CNTRL				0x114
-#define QSERDES_RX_SIGDET_LVL				0x118
-#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL		0x11c
-#define QSERDES_RX_RX_BAND				0x120
-#define QSERDES_RX_RX_INTERFACE_MODE			0x12c
-
-/* QMP PHY PCS registers */
-#define QPHY_POWER_DOWN_CONTROL				0x04
-#define QPHY_TXDEEMPH_M6DB_V0				0x24
-#define QPHY_TXDEEMPH_M3P5DB_V0				0x28
-#define QPHY_ENDPOINT_REFCLK_DRIVE			0x54
-#define QPHY_RX_IDLE_DTCT_CNTRL				0x58
-#define QPHY_POWER_STATE_CONFIG1			0x60
-#define QPHY_POWER_STATE_CONFIG2			0x64
-#define QPHY_POWER_STATE_CONFIG4			0x6c
-#define QPHY_LOCK_DETECT_CONFIG1			0x80
-#define QPHY_LOCK_DETECT_CONFIG2			0x84
-#define QPHY_LOCK_DETECT_CONFIG3			0x88
-#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
-#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
-#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1A8
-#define QPHY_OSC_DTCT_ACTIONS				0x1AC
-#define QPHY_RX_SIGDET_LVL				0x1D8
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
+#include "phy-qcom-qmp.h"
 
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
new file mode 100644
index 0000000..84d7038
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_H_
+#define QCOM_PHY_QMP_H_
+
+/* Only for QMP V2 PHY - QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER				0x00c
+#define QSERDES_COM_SSC_EN_CENTER			0x010
+#define QSERDES_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_COM_SSC_PER1				0x01c
+#define QSERDES_COM_SSC_PER2				0x020
+#define QSERDES_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN			0x034
+#define QSERDES_COM_CLK_ENABLE1				0x038
+#define QSERDES_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_COM_SYSCLK_BUF_ENABLE			0x040
+#define QSERDES_COM_PLL_IVCO				0x048
+#define QSERDES_COM_LOCK_CMP1_MODE0			0x04c
+#define QSERDES_COM_LOCK_CMP2_MODE0			0x050
+#define QSERDES_COM_LOCK_CMP3_MODE0			0x054
+#define QSERDES_COM_LOCK_CMP1_MODE1			0x058
+#define QSERDES_COM_LOCK_CMP2_MODE1			0x05c
+#define QSERDES_COM_LOCK_CMP3_MODE1			0x060
+#define QSERDES_COM_BG_TRIM				0x070
+#define QSERDES_COM_CLK_EP_DIV				0x074
+#define QSERDES_COM_CP_CTRL_MODE0			0x078
+#define QSERDES_COM_CP_CTRL_MODE1			0x07c
+#define QSERDES_COM_PLL_RCTRL_MODE0			0x084
+#define QSERDES_COM_PLL_RCTRL_MODE1			0x088
+#define QSERDES_COM_PLL_CCTRL_MODE0			0x090
+#define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
+#define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
+#define QSERDES_COM_RESETSM_CNTRL			0x0b4
+#define QSERDES_COM_RESTRIM_CTRL			0x0bc
+#define QSERDES_COM_RESCODE_DIV_NUM			0x0c4
+#define QSERDES_COM_LOCK_CMP_EN				0x0c8
+#define QSERDES_COM_LOCK_CMP_CFG			0x0cc
+#define QSERDES_COM_DEC_START_MODE0			0x0d0
+#define QSERDES_COM_DEC_START_MODE1			0x0d4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0		0x0dc
+#define QSERDES_COM_DIV_FRAC_START2_MODE0		0x0e0
+#define QSERDES_COM_DIV_FRAC_START3_MODE0		0x0e4
+#define QSERDES_COM_DIV_FRAC_START1_MODE1		0x0e8
+#define QSERDES_COM_DIV_FRAC_START2_MODE1		0x0ec
+#define QSERDES_COM_DIV_FRAC_START3_MODE1		0x0f0
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0		0x108
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0		0x10c
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1		0x110
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1		0x114
+#define QSERDES_COM_VCO_TUNE_CTRL			0x124
+#define QSERDES_COM_VCO_TUNE_MAP			0x128
+#define QSERDES_COM_VCO_TUNE1_MODE0			0x12c
+#define QSERDES_COM_VCO_TUNE2_MODE0			0x130
+#define QSERDES_COM_VCO_TUNE1_MODE1			0x134
+#define QSERDES_COM_VCO_TUNE2_MODE1			0x138
+#define QSERDES_COM_VCO_TUNE_TIMER1			0x144
+#define QSERDES_COM_VCO_TUNE_TIMER2			0x148
+#define QSERDES_COM_BG_CTRL				0x170
+#define QSERDES_COM_CLK_SELECT				0x174
+#define QSERDES_COM_HSCLK_SEL				0x178
+#define QSERDES_COM_CORECLK_DIV				0x184
+#define QSERDES_COM_CORE_CLK_EN				0x18c
+#define QSERDES_COM_C_READY_STATUS			0x190
+#define QSERDES_COM_CMN_CONFIG				0x194
+#define QSERDES_COM_SVS_MODE_CLK_SEL			0x19c
+#define QSERDES_COM_DEBUG_BUS0				0x1a0
+#define QSERDES_COM_DEBUG_BUS1				0x1a4
+#define QSERDES_COM_DEBUG_BUS2				0x1a8
+#define QSERDES_COM_DEBUG_BUS3				0x1ac
+#define QSERDES_COM_DEBUG_BUS_SEL			0x1b0
+#define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
+
+/* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
+#define QSERDES_TX_DEBUG_BUS_SEL			0x064
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068
+#define QSERDES_TX_LANE_MODE				0x094
+#define QSERDES_TX_RCV_DETECT_LVL_2			0x0ac
+
+/* Only for QMP V2 PHY - RX registers */
+#define QSERDES_RX_UCDR_SO_GAIN_HALF			0x010
+#define QSERDES_RX_UCDR_SO_GAIN				0x01c
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN		0x040
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE	0x048
+#define QSERDES_RX_RX_TERM_BW				0x090
+#define QSERDES_RX_RX_EQ_GAIN1_LSB			0x0c4
+#define QSERDES_RX_RX_EQ_GAIN1_MSB			0x0c8
+#define QSERDES_RX_RX_EQ_GAIN2_LSB			0x0cc
+#define QSERDES_RX_RX_EQ_GAIN2_MSB			0x0d0
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3		0x0dc
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4		0x0e0
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x108
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x10c
+#define QSERDES_RX_SIGDET_ENABLES			0x110
+#define QSERDES_RX_SIGDET_CNTRL				0x114
+#define QSERDES_RX_SIGDET_LVL				0x118
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL		0x11c
+#define QSERDES_RX_RX_BAND				0x120
+#define QSERDES_RX_RX_INTERFACE_MODE			0x12c
+
+/* Only for QMP V2 PHY - PCS registers */
+#define QPHY_POWER_DOWN_CONTROL				0x04
+#define QPHY_TXDEEMPH_M6DB_V0				0x24
+#define QPHY_TXDEEMPH_M3P5DB_V0				0x28
+#define QPHY_ENDPOINT_REFCLK_DRIVE			0x54
+#define QPHY_RX_IDLE_DTCT_CNTRL				0x58
+#define QPHY_POWER_STATE_CONFIG1			0x60
+#define QPHY_POWER_STATE_CONFIG2			0x64
+#define QPHY_POWER_STATE_CONFIG4			0x6c
+#define QPHY_LOCK_DETECT_CONFIG1			0x80
+#define QPHY_LOCK_DETECT_CONFIG2			0x84
+#define QPHY_LOCK_DETECT_CONFIG3			0x88
+#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
+#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1A8
+#define QPHY_OSC_DTCT_ACTIONS				0x1AC
+#define QPHY_RX_SIGDET_LVL				0x1D8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 11/17] phy: qcom-qmp: Add register offsets for QMP V3 PHY

[Manu Gautam]

Registers offsets for QMP V3 PHY are changed from
previous versions (1/2), update same in header file.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.h | 149 ++++++++++++++++++++++++++++++++++++
 1 file changed, 149 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 84d7038..944269a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -125,4 +125,153 @@
 #define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
 #define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
 
+/* Only for QMP V3 PHY - DP COM registers */
+#define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
+#define QPHY_V3_DP_COM_SW_RESET				0x04
+#define QPHY_V3_DP_COM_POWER_DOWN_CTRL			0x08
+#define QPHY_V3_DP_COM_SWI_CTRL				0x0c
+#define QPHY_V3_DP_COM_TYPEC_CTRL			0x10
+#define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL			0x14
+#define QPHY_V3_DP_COM_RESET_OVRD_CTRL			0x1c
+
+/* Only for QMP V3 PHY - QSERDES COM registers */
+#define QSERDES_V3_COM_BG_TIMER				0x00c
+#define QSERDES_V3_COM_SSC_EN_CENTER			0x010
+#define QSERDES_V3_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_V3_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_V3_COM_SSC_PER1				0x01c
+#define QSERDES_V3_COM_SSC_PER2				0x020
+#define QSERDES_V3_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_V3_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN		0x034
+#define QSERDES_V3_COM_CLK_ENABLE1			0x038
+#define QSERDES_V3_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE		0x040
+#define QSERDES_V3_COM_PLL_IVCO				0x048
+#define QSERDES_V3_COM_LOCK_CMP1_MODE0			0x098
+#define QSERDES_V3_COM_LOCK_CMP2_MODE0			0x09c
+#define QSERDES_V3_COM_LOCK_CMP3_MODE0			0x0a0
+#define QSERDES_V3_COM_LOCK_CMP1_MODE1			0x0a4
+#define QSERDES_V3_COM_LOCK_CMP2_MODE1			0x0a8
+#define QSERDES_V3_COM_LOCK_CMP3_MODE1			0x0ac
+#define QSERDES_V3_COM_CLK_EP_DIV			0x05c
+#define QSERDES_V3_COM_CP_CTRL_MODE0			0x060
+#define QSERDES_V3_COM_CP_CTRL_MODE1			0x064
+#define QSERDES_V3_COM_PLL_RCTRL_MODE0			0x068
+#define QSERDES_V3_COM_PLL_RCTRL_MODE1			0x06c
+#define QSERDES_V3_COM_PLL_CCTRL_MODE0			0x070
+#define QSERDES_V3_COM_PLL_CCTRL_MODE1			0x074
+#define QSERDES_V3_COM_SYSCLK_EN_SEL			0x080
+#define QSERDES_V3_COM_RESETSM_CNTRL			0x088
+#define QSERDES_V3_COM_RESETSM_CNTRL2			0x08c
+#define QSERDES_V3_COM_LOCK_CMP_EN			0x090
+#define QSERDES_V3_COM_LOCK_CMP_CFG			0x094
+#define QSERDES_V3_COM_DEC_START_MODE0			0x0b0
+#define QSERDES_V3_COM_DEC_START_MODE1			0x0b4
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0		0x0b8
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0		0x0bc
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0		0x0c0
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1		0x0c4
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1		0x0c8
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1		0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0		0x0d8
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0		0x0dc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1		0x0e0
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1		0x0e4
+#define QSERDES_V3_COM_VCO_TUNE_CTRL			0x0ec
+#define QSERDES_V3_COM_VCO_TUNE_MAP			0x0f0
+#define QSERDES_V3_COM_VCO_TUNE1_MODE0			0x0f4
+#define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
+#define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
+#define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
+#define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
+#define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
+#define QSERDES_V3_COM_CLK_SELECT			0x138
+#define QSERDES_V3_COM_HSCLK_SEL			0x13c
+#define QSERDES_V3_COM_CORECLK_DIV_MODE0		0x148
+#define QSERDES_V3_COM_CORECLK_DIV_MODE1		0x14c
+#define QSERDES_V3_COM_CORE_CLK_EN			0x154
+#define QSERDES_V3_COM_C_READY_STATUS			0x158
+#define QSERDES_V3_COM_CMN_CONFIG			0x15c
+#define QSERDES_V3_COM_SVS_MODE_CLK_SEL			0x164
+#define QSERDES_V3_COM_DEBUG_BUS0			0x168
+#define QSERDES_V3_COM_DEBUG_BUS1			0x16c
+#define QSERDES_V3_COM_DEBUG_BUS2			0x170
+#define QSERDES_V3_COM_DEBUG_BUS3			0x174
+#define QSERDES_V3_COM_DEBUG_BUS_SEL			0x178
+
+/* Only for QMP V3 PHY - TX registers */
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX		0x044
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX		0x048
+#define QSERDES_V3_TX_DEBUG_BUS_SEL			0x058
+#define QSERDES_V3_TX_HIGHZ_DRVR_EN			0x060
+#define QSERDES_V3_TX_LANE_MODE_1			0x08c
+#define QSERDES_V3_TX_RCV_DETECT_LVL_2			0x0a4
+
+/* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
+#define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V3_RX_RX_TERM_BW			0x07c
+#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB			0x0c8
+#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB			0x0cc
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d4
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3		0x0d8
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4		0x0dc
+#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x0f8
+#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x0fc
+#define QSERDES_V3_RX_SIGDET_ENABLES			0x100
+#define QSERDES_V3_RX_SIGDET_CNTRL			0x104
+#define QSERDES_V3_RX_SIGDET_LVL			0x108
+#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL		0x10c
+#define QSERDES_V3_RX_RX_BAND				0x110
+#define QSERDES_V3_RX_RX_INTERFACE_MODE			0x11c
+
+/* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V3_PCS_TXMGN_V0				0x00c
+#define QPHY_V3_PCS_TXMGN_V1				0x010
+#define QPHY_V3_PCS_TXMGN_V2				0x014
+#define QPHY_V3_PCS_TXMGN_V3				0x018
+#define QPHY_V3_PCS_TXMGN_V4				0x01c
+#define QPHY_V3_PCS_TXMGN_LS				0x020
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V0			0x024
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0			0x028
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V1			0x02c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1			0x030
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V2			0x034
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2			0x038
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V3			0x03c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3			0x040
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V4			0x044
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4			0x048
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_LS			0x04c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS			0x050
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE		0x054
+#define QPHY_V3_PCS_RX_IDLE_DTCT_CNTRL			0x058
+#define QPHY_V3_PCS_RATE_SLEW_CNTRL			0x05c
+#define QPHY_V3_PCS_POWER_STATE_CONFIG1			0x060
+#define QPHY_V3_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG4			0x06c
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L		0x070
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H		0x074
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L			0x078
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H			0x07c
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG1			0x080
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG2			0x084
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG3			0x088
+#define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
+#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
+#define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
+#define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
+#define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
+#define QPHY_V3_PCS_FLL_CNTRL1				0x0c4
+#define QPHY_V3_PCS_FLL_CNTRL2				0x0c8
+#define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
+#define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
+#define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
+
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 12/17] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY

[Manu Gautam]

Update compatible string and clock names for QMP version V3
USB PHY.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index b6a9f2b..dcf1b8f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -8,7 +8,8 @@ Required properties:
  - compatible: compatible list, contains:
 	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
+	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+	       "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
 
  - reg: offset and length of register set for PHY's common serdes block.
 
@@ -25,10 +26,13 @@ Required properties:
  - clock-names: "cfg_ahb" for phy config clock,
 		"aux" for phy aux clock,
 		"ref" for 19.2 MHz ref clk,
+		"com_aux" for phy common block aux clock,
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
+		For "qcom,qmp-v3-usb3-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 13/17] phy: qcom-qmp: Add support for QMP V3 USB3 PHY

[Manu Gautam]

QMP V3 USB3 PHY is a DisplayPort (DP) and USB combo PHY
with dual RX/TX lanes to support type-c. There is a
separate block DP_COM for configuration related to type-c
or DP. Add support for dp_com region and secondary rx/tx
lanes initialization.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 223 +++++++++++++++++++++++++++++++++++-
 1 file changed, 220 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 2a1117b..55b8397 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -47,6 +47,21 @@
 /* QPHY_COM_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
+/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
+/* DP PHY soft reset */
+#define SW_DPPHY_RESET				BIT(0)
+/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
+#define SW_DPPHY_RESET_MUX			BIT(1)
+/* USB3 PHY soft reset */
+#define SW_USB3PHY_RESET			BIT(2)
+/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
+#define SW_USB3PHY_RESET_MUX			BIT(3)
+
+/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
+#define USB3_MODE				BIT(0) /* enables USB3 mode */
+#define DP_MODE					BIT(1) /* enables DP mode */
+
+
 #define PHY_INIT_COMPLETE_TIMEOUT		1000
 #define POWER_DOWN_DELAY_US_MIN			10
 #define POWER_DOWN_DELAY_US_MAX			11
@@ -122,6 +137,12 @@ enum qphy_reg_layout {
 	[QPHY_PCS_READY_STATUS]		= 0x17c,
 };
 
+static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_READY_STATUS]		= 0x174,
+};
+
 static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -350,6 +371,112 @@ enum qphy_reg_layout {
 	QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
 };
 
+static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
+	/* FLL settings */
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+	/* Lock Det settings */
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
 	/* phy-type - PCIE/UFS/USB */
@@ -394,6 +521,12 @@ struct qmp_phy_cfg {
 	/* power_down delay in usec */
 	int pwrdn_delay_min;
 	int pwrdn_delay_max;
+
+	/* true, if PHY has a separate DP_COM control block */
+	bool has_phy_dp_com_ctrl;
+	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
+	unsigned int tx_b_lane_offset;
+	unsigned int rx_b_lane_offset;
 };
 
 /**
@@ -424,6 +557,7 @@ struct qmp_phy {
  *
  * @dev: device
  * @serdes: iomapped memory space for phy's serdes
+ * @dp_com: iomapped memory space for phy's dp_com control block
  *
  * @clks: array of clocks required by phy
  * @resets: array of resets required by phy
@@ -437,6 +571,7 @@ struct qmp_phy {
 struct qcom_qmp {
 	struct device *dev;
 	void __iomem *serdes;
+	void __iomem *dp_com;
 
 	struct clk_bulk_data *clks;
 	struct reset_control **resets;
@@ -478,6 +613,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	"aux", "cfg_ahb", "ref",
 };
 
+static const char * const qmp_v3_phy_clk_l[] = {
+	"aux", "cfg_ahb", "ref", "com_aux",
+};
+
 /* list of resets */
 static const char * const msm8996_pciephy_reset_l[] = {
 	"phy", "common", "cfg",
@@ -584,6 +723,38 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.pwrdn_delay_max	= 1005,		/* us */
 };
 
+static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+	.tx_tbl			= qmp_v3_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+	.rx_tbl			= qmp_v3_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+	.pcs_tbl		= qmp_v3_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+	.clk_list		= qmp_v3_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= msm8996_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.mask_pcs_ready		= PHYSTATUS,
+
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+
+	.has_phy_dp_com_ctrl	= true,
+	.tx_b_lane_offset	= 0x400,
+	.rx_b_lane_offset	= 0x400,
+};
+
 static void qcom_qmp_phy_configure(void __iomem *base,
 				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
@@ -620,6 +791,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	void __iomem *serdes = qmp->serdes;
+	void __iomem *dp_com = qmp->dp_com;
 	int ret, i;
 
 	mutex_lock(&qmp->phy_mutex);
@@ -663,6 +835,23 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
 			     SW_PWRDN);
 
+	if (cfg->has_phy_dp_com_ctrl) {
+		qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
+			     SW_PWRDN);
+		/* override hardware control for reset of qmp phy */
+		qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+			     SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+			     SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+		qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
+			     USB3_MODE | DP_MODE);
+
+		/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+		qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+			     SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+			     SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+	}
+
 	/* Serdes configuration */
 	qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl,
 			       cfg->serdes_tbl_num);
@@ -746,6 +935,7 @@ static int qcom_qmp_phy_init(struct phy *phy)
 	void __iomem *tx = qphy->tx;
 	void __iomem *rx = qphy->rx;
 	void __iomem *pcs = qphy->pcs;
+	void __iomem *dp_com = qmp->dp_com;
 	void __iomem *status;
 	unsigned int mask, val;
 	int ret;
@@ -767,7 +957,16 @@ static int qcom_qmp_phy_init(struct phy *phy)
 
 	/* Tx, Rx, and PCS configurations */
 	qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num);
+	/* Configuration for other LANE for USB-DP combo PHY */
+	if (cfg->has_phy_dp_com_ctrl)
+		qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs,
+				       cfg->tx_tbl, cfg->tx_tbl_num);
+
 	qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num);
+	if (cfg->has_phy_dp_com_ctrl)
+		qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs,
+				       cfg->rx_tbl, cfg->rx_tbl_num);
+
 	qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	/*
@@ -781,6 +980,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
 
 	/* Pull PHY out of reset state */
 	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+	if (cfg->has_phy_dp_com_ctrl)
+		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
 
 	/* start SerDes and Phy-Coding-Sublayer */
 	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
@@ -1031,6 +1232,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	}, {
 		.compatible = "qcom,ipq8074-qmp-pcie-phy",
 		.data = &ipq8074_pciephy_cfg,
+	}, {
+		.compatible = "qcom,qmp-v3-usb3-phy",
+		.data = &qmp_v3_usb3phy_cfg,
 	},
 	{ },
 };
@@ -1054,6 +1258,11 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 	qmp->dev = dev;
 	dev_set_drvdata(dev, qmp);
 
+	/* Get the specific init parameters of QMP phy */
+	qmp->cfg = of_device_get_match_data(dev);
+	if (!qmp->cfg)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(base))
@@ -1062,10 +1271,18 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 	/* per PHY serdes; usually located at base address */
 	qmp->serdes = base;
 
-	mutex_init(&qmp->phy_mutex);
+	/* per PHY dp_com; if PHY has dp_com control block */
+	if (qmp->cfg->has_phy_dp_com_ctrl) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   "dp_com");
+		base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(base))
+			return PTR_ERR(base);
 
-	/* Get the specific init parameters of QMP phy */
-	qmp->cfg = of_device_get_match_data(dev);
+		qmp->dp_com = base;
+	}
+
+	mutex_init(&qmp->phy_mutex);
 
 	ret = qcom_qmp_phy_clk_init(dev);
 	if (ret)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 14/17] phy: Add USB speed related PHY modes

[Manu Gautam]

Add following USB speed related PHY modes:
LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed)

Speed related information is required by some QCOM PHY drivers
to program PHY monitor resume/remote-wakeup events in suspended
state. Speed is needed in order to set correct polarity of wakeup
events for detection. E.g. QUSB2 PHY monitors DP/DM line state
depending on whether speed is LS or FS/HS to detect resume.
Similarly QMP USB3 PHY in SS mode should monitor RX terminations
attach/detach and LFPS events depending on SSPHY is active or not.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/phy-core.c  |  2 ++
 include/linux/phy/phy.h | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index b4964b0..3c31ce5 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -351,6 +351,8 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
 
 	mutex_lock(&phy->mutex);
 	ret = phy->ops->set_mode(phy, mode);
+	if (!ret)
+		phy->attrs.mode = mode;
 	mutex_unlock(&phy->mutex);
 
 	return ret;
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index d8da3e5..b951f90 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -25,7 +25,15 @@
 enum phy_mode {
 	PHY_MODE_INVALID,
 	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_HOST_LS,
+	PHY_MODE_USB_HOST_FS,
+	PHY_MODE_USB_HOST_HS,
+	PHY_MODE_USB_HOST_SS,
 	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_DEVICE_LS,
+	PHY_MODE_USB_DEVICE_FS,
+	PHY_MODE_USB_DEVICE_HS,
+	PHY_MODE_USB_DEVICE_SS,
 	PHY_MODE_USB_OTG,
 	PHY_MODE_SGMII,
 	PHY_MODE_10GKR,
@@ -61,6 +69,7 @@ struct phy_ops {
  */
 struct phy_attrs {
 	u32			bus_width;
+	enum phy_mode		mode;
 };
 
 /**
@@ -144,6 +153,10 @@ static inline void *phy_get_drvdata(struct phy *phy)
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
 int phy_set_mode(struct phy *phy, enum phy_mode mode);
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return phy->attrs.mode;
+}
 int phy_reset(struct phy *phy);
 int phy_calibrate(struct phy *phy);
 static inline int phy_get_bus_width(struct phy *phy)
@@ -260,6 +273,11 @@ static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
 	return -ENOSYS;
 }
 
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return PHY_MODE_INVALID;
+}
+
 static inline int phy_reset(struct phy *phy)
 {
 	if (!phy)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 15/17] phy: qcom-qusb2: Add support for runtime PM

[Manu Gautam]

Disable clocks and enable DP/DM wakeup interrupts when
suspending PHY.
Core driver should notify speed to PHY driver to enable
appropriate DP/DM wakeup interrupts polarity in suspend state.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 176 ++++++++++++++++++++++++++++++++++
 1 file changed, 176 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9b0d1ff..f1e4a64 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -56,6 +56,18 @@
 
 #define PHY_CLK_SCHEME_SEL		BIT(0)
 
+/* QUSB2PHY_INTR_CTRL register bits */
+#define DMSE_INTR_HIGH_SEL			BIT(4)
+#define DPSE_INTR_HIGH_SEL			BIT(3)
+#define CHG_DET_INTR_EN				BIT(2)
+#define DMSE_INTR_EN				BIT(1)
+#define DPSE_INTR_EN				BIT(0)
+
+/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */
+#define CORE_PLL_EN_FROM_RESET			BIT(4)
+#define CORE_RESET				BIT(5)
+#define CORE_RESET_MUX				BIT(6)
+
 #define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO	0x04
 #define QUSB2PHY_PLL_CLOCK_INVERTERS		0x18c
 #define QUSB2PHY_PLL_CMODE			0x2c
@@ -93,6 +105,7 @@ struct qusb2_phy_init_tbl {
 
 /* set of registers with offsets different per-PHY */
 enum qusb2phy_reg_layout {
+	QUSB2PHY_PLL_CORE_INPUT_OVERRIDE,
 	QUSB2PHY_PLL_STATUS,
 	QUSB2PHY_PORT_TUNE1,
 	QUSB2PHY_PORT_TUNE2,
@@ -112,8 +125,10 @@ enum qusb2phy_reg_layout {
 	[QUSB2PHY_PORT_TUNE3]		= 0x88,
 	[QUSB2PHY_PORT_TUNE4]		= 0x8c,
 	[QUSB2PHY_PORT_TUNE5]		= 0x90,
+	[QUSB2PHY_PORT_TEST1]		= 0xb8,
 	[QUSB2PHY_PORT_TEST2]		= 0x9c,
 	[QUSB2PHY_PORT_POWERDOWN]	= 0xb4,
+	[QUSB2PHY_INTR_CTRL]		= 0xbc,
 };
 
 static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
@@ -133,14 +148,17 @@ enum qusb2phy_reg_layout {
 };
 
 static const unsigned int qusb2_v2_regs_layout[] = {
+	[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
 	[QUSB2PHY_PLL_STATUS]		= 0x1a0,
 	[QUSB2PHY_PORT_TUNE1]		= 0x240,
 	[QUSB2PHY_PORT_TUNE2]		= 0x244,
 	[QUSB2PHY_PORT_TUNE3]		= 0x248,
 	[QUSB2PHY_PORT_TUNE4]		= 0x24c,
 	[QUSB2PHY_PORT_TUNE5]		= 0x250,
+	[QUSB2PHY_PORT_TEST1]		= 0x254,
 	[QUSB2PHY_PORT_TEST2]		= 0x258,
 	[QUSB2PHY_PORT_POWERDOWN]	= 0x210,
+	[QUSB2PHY_INTR_CTRL]		= 0x230,
 };
 
 static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
@@ -175,12 +193,16 @@ struct qusb2_phy_cfg {
 	const unsigned int *regs;
 	unsigned int mask_core_ready;
 	unsigned int disable_ctrl;
+	unsigned int autoresume_en;
 
 	/* true if PHY has PLL_TEST register to select clk_scheme */
 	bool has_pll_test;
 
 	/* true if TUNE1 register must be updated by fused value, else TUNE2 */
 	bool update_tune1_with_efuse;
+
+	/* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
+	bool has_pll_override;
 };
 
 static const struct qusb2_phy_cfg msm8996_phy_cfg = {
@@ -191,6 +213,7 @@ struct qusb2_phy_cfg {
 	.has_pll_test	= true,
 	.disable_ctrl	= (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
 	.mask_core_ready = PLL_LOCKED,
+	.autoresume_en	 = BIT(3),
 };
 
 static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
@@ -201,6 +224,8 @@ struct qusb2_phy_cfg {
 	.disable_ctrl	= (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
 			   POWER_DOWN),
 	.mask_core_ready = CORE_READY_STATUS,
+	.has_pll_override = true,
+	.autoresume_en	  = BIT(0),
 };
 
 static const char * const qusb2_phy_vreg_names[] = {
@@ -226,6 +251,8 @@ struct qusb2_phy_cfg {
  *
  * @cfg: phy config data
  * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
+ * @phy_initialized: indicate if PHY has been initialized
+ * @mode: current PHY mode
  */
 struct qusb2_phy {
 	struct phy *phy;
@@ -242,6 +269,8 @@ struct qusb2_phy {
 
 	const struct qusb2_phy_cfg *cfg;
 	bool has_se_clk_scheme;
+	bool phy_initialized;
+	enum phy_mode mode;
 };
 
 static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val)
@@ -317,6 +346,133 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 }
 
+static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct qusb2_phy *qphy = phy_get_drvdata(phy);
+
+	qphy->mode = mode;
+
+	return 0;
+}
+
+static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev)
+{
+	struct qusb2_phy *qphy = dev_get_drvdata(dev);
+	const struct qusb2_phy_cfg *cfg = qphy->cfg;
+	u32 intr_mask;
+
+	dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode);
+
+	if (!qphy->phy_initialized) {
+		dev_vdbg(dev, "PHY not initialized, bailing out\n");
+		return 0;
+	}
+
+	/*
+	 * Enable DP/DM interrupts to detect line state changes based on current
+	 * speed. In other words, enable the triggers _opposite_ of what the
+	 * current D+/D- levels are e.g. if currently D+ high, D- low
+	 * (HS 'J'/Suspend), configure the mask to trigger on D+ low OR D- high
+	 */
+	intr_mask = DPSE_INTR_EN | DMSE_INTR_EN;
+	switch (qphy->mode) {
+	case PHY_MODE_USB_HOST_HS:
+	case PHY_MODE_USB_HOST_FS:
+	case PHY_MODE_USB_DEVICE_HS:
+	case PHY_MODE_USB_DEVICE_FS:
+		intr_mask |= DMSE_INTR_HIGH_SEL;
+		break;
+	case PHY_MODE_USB_HOST_LS:
+	case PHY_MODE_USB_DEVICE_LS:
+		intr_mask |= DPSE_INTR_HIGH_SEL;
+		break;
+	default:
+		/* No device connected, enable both DP/DM high interrupt */
+		intr_mask |= DMSE_INTR_HIGH_SEL;
+		intr_mask |= DPSE_INTR_HIGH_SEL;
+		break;
+	}
+
+	writel(intr_mask, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
+
+	/* hold core PLL into reset */
+	if (cfg->has_pll_override) {
+		qusb2_setbits(qphy->base,
+			      cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
+			      CORE_PLL_EN_FROM_RESET | CORE_RESET |
+			      CORE_RESET_MUX);
+	}
+
+	/* enable phy auto-resume only if device is connected on bus */
+	if (qphy->mode != PHY_MODE_INVALID) {
+		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
+			      cfg->autoresume_en);
+		/* Autoresume bit has to be toggled in order to enable it */
+		qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
+			      cfg->autoresume_en);
+	}
+
+	if (!qphy->has_se_clk_scheme)
+		clk_disable_unprepare(qphy->ref_clk);
+
+	clk_disable_unprepare(qphy->cfg_ahb_clk);
+	clk_disable_unprepare(qphy->iface_clk);
+
+	return 0;
+}
+
+static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev)
+{
+	struct qusb2_phy *qphy = dev_get_drvdata(dev);
+	const struct qusb2_phy_cfg *cfg = qphy->cfg;
+	int ret;
+
+	dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode);
+
+	if (!qphy->phy_initialized) {
+		dev_vdbg(dev, "PHY not initialized, bailing out\n");
+		return 0;
+	}
+
+	ret = clk_prepare_enable(qphy->iface_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable iface_clk, %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(qphy->cfg_ahb_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret);
+		goto disable_iface_clk;
+	}
+
+	if (!qphy->has_se_clk_scheme) {
+		clk_prepare_enable(qphy->ref_clk);
+		if (ret) {
+			dev_err(dev, "failed to enable ref clk, %d\n", ret);
+			goto disable_ahb_clk;
+		}
+	}
+
+	writel(0x0, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
+
+	/* bring core PLL out of reset */
+	if (cfg->has_pll_override) {
+		qusb2_clrbits(qphy->base,
+			      cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
+			      CORE_RESET | CORE_RESET_MUX);
+	}
+
+	return 0;
+
+disable_ahb_clk:
+	clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+	clk_disable_unprepare(qphy->iface_clk);
+
+	return ret;
+}
+
 static int qusb2_phy_init(struct phy *phy)
 {
 	struct qusb2_phy *qphy = phy_get_drvdata(phy);
@@ -441,6 +597,7 @@ static int qusb2_phy_init(struct phy *phy)
 		ret = -EBUSY;
 		goto disable_ref_clk;
 	}
+	qphy->phy_initialized = true;
 
 	return 0;
 
@@ -477,12 +634,15 @@ static int qusb2_phy_exit(struct phy *phy)
 
 	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
 
+	qphy->phy_initialized = false;
+
 	return 0;
 }
 
 static const struct phy_ops qusb2_phy_gen_ops = {
 	.init		= qusb2_phy_init,
 	.exit		= qusb2_phy_exit,
+	.set_mode	= qusb2_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
@@ -498,6 +658,11 @@ static int qusb2_phy_exit(struct phy *phy)
 };
 MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table);
 
+static const struct dev_pm_ops qusb2_phy_pm_ops = {
+	SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend,
+			   qusb2_phy_runtime_resume, NULL)
+};
+
 static int qusb2_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -575,11 +740,19 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 		qphy->cell = NULL;
 		dev_dbg(dev, "failed to lookup tune2 hstx trim value\n");
 	}
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
 
 	generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops);
 	if (IS_ERR(generic_phy)) {
 		ret = PTR_ERR(generic_phy);
 		dev_err(dev, "failed to create phy, %d\n", ret);
+		pm_runtime_disable(dev);
 		return ret;
 	}
 	qphy->phy = generic_phy;
@@ -590,6 +763,8 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (!IS_ERR(phy_provider))
 		dev_info(dev, "Registered Qcom-QUSB2 phy\n");
+	else
+		pm_runtime_disable(dev);
 
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
@@ -598,6 +773,7 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 	.probe		= qusb2_phy_probe,
 	.driver = {
 		.name	= "qcom-qusb2-phy",
+		.pm	= &qusb2_phy_pm_ops,
 		.of_match_table = qusb2_phy_of_match_table,
 	},
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 16/17] phy: qcom-qmp: Add support for runtime PM

[Manu Gautam]

Disable clocks and enable PHY autonomous mode to detect
wakeup events when PHY is suspended.
Core driver should notify speed to PHY driver to enable
LFPS and/or RX_DET interrupts.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 177 +++++++++++++++++++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp.h |   3 +
 2 files changed, 179 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 55b8397..ba6c5b2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -61,6 +61,19 @@
 #define USB3_MODE				BIT(0) /* enables USB3 mode */
 #define DP_MODE					BIT(1) /* enables DP mode */
 
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN				BIT(0)
+#define ALFPS_DTCT_EN				BIT(1)
+#define ARCVR_DTCT_EVENT_SEL			BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR				BIT(0)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
+#define RCVR_DETECT				BIT(0)
+
+/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
 
 #define PHY_INIT_COMPLETE_TIMEOUT		1000
 #define POWER_DOWN_DELAY_US_MIN			10
@@ -108,6 +121,9 @@ enum qphy_reg_layout {
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
 	QPHY_PCS_READY_STATUS,
+	QPHY_PCS_AUTONOMOUS_MODE_CTRL,
+	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
+	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 };
 
 static const unsigned int pciephy_regs_layout[] = {
@@ -135,12 +151,18 @@ enum qphy_reg_layout {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_READY_STATUS]		= 0x17c,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d4,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0d8,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
 };
 
 static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_READY_STATUS]		= 0x174,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
 };
 
 static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
@@ -536,6 +558,7 @@ struct qmp_phy_cfg {
  * @tx: iomapped memory space for lane's tx
  * @rx: iomapped memory space for lane's rx
  * @pcs: iomapped memory space for lane's pcs
+ * @pcs_misc: iomapped memory space for lane's pcs_misc
  * @pipe_clk: pipe lock
  * @index: lane index
  * @qmp: QMP phy to which this lane belongs
@@ -546,6 +569,7 @@ struct qmp_phy {
 	void __iomem *tx;
 	void __iomem *rx;
 	void __iomem *pcs;
+	void __iomem *pcs_misc;
 	struct clk *pipe_clk;
 	unsigned int index;
 	struct qcom_qmp *qmp;
@@ -567,6 +591,8 @@ struct qmp_phy {
  * @phys: array of per-lane phy descriptors
  * @phy_mutex: mutex lock for PHY common block initialization
  * @init_count: phy common block initialization count
+ * @phy_initialized: indicate if PHY has been initialized
+ * @mode: current PHY mode
  */
 struct qcom_qmp {
 	struct device *dev;
@@ -582,6 +608,8 @@ struct qcom_qmp {
 
 	struct mutex phy_mutex;
 	int init_count;
+	bool phy_initialized;
+	enum phy_mode mode;
 };
 
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@@ -995,6 +1023,7 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		dev_err(qmp->dev, "phy initialization timed-out\n");
 		goto err_pcs_ready;
 	}
+	qmp->phy_initialized = true;
 
 	return ret;
 
@@ -1029,6 +1058,128 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 
 	qcom_qmp_phy_com_exit(qmp);
 
+	qmp->phy_initialized = false;
+
+	return 0;
+}
+
+static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct qmp_phy *qphy = phy_get_drvdata(phy);
+	struct qcom_qmp *qmp = qphy->qmp;
+
+	qmp->mode = mode;
+
+	return 0;
+}
+
+static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
+{
+	struct qcom_qmp *qmp = qphy->qmp;
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_misc = qphy->pcs_misc;
+	u32 intr_mask;
+
+	if (qmp->mode == PHY_MODE_USB_HOST_SS ||
+	    qmp->mode == PHY_MODE_USB_DEVICE_SS)
+		intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
+	else
+		intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
+
+	/* Clear any pending interrupts status */
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	/* Writing 1 followed by 0 clears the interrupt */
+	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+
+	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+		     ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
+
+	/* Enable required PHY autonomous mode interrupts */
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+
+	/* Enable i/o clamp_n for autonomous mode */
+	if (pcs_misc)
+		qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+}
+
+static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
+{
+	struct qcom_qmp *qmp = qphy->qmp;
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_misc = qphy->pcs_misc;
+
+	/* Disable i/o clamp_n on resume for normal mode */
+	if (pcs_misc)
+		qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
+
+	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+		     ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
+
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	/* Writing 1 followed by 0 clears the interrupt */
+	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
+{
+	struct qcom_qmp *qmp = dev_get_drvdata(dev);
+	struct qmp_phy *qphy = qmp->phys[0];
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+
+	dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
+
+	/* Supported only for USB3 PHY */
+	if (cfg->type != PHY_TYPE_USB3)
+		return 0;
+
+	if (!qmp->phy_initialized) {
+		dev_vdbg(dev, "PHY not initialized, bailing out\n");
+		return 0;
+	}
+
+	qcom_qmp_phy_enable_autonomous_mode(qphy);
+
+	clk_disable_unprepare(qphy->pipe_clk);
+	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+
+	return 0;
+}
+
+static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
+{
+	struct qcom_qmp *qmp = dev_get_drvdata(dev);
+	struct qmp_phy *qphy = qmp->phys[0];
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	int ret = 0;
+
+	dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
+
+	/* Supported only for USB3 PHY */
+	if (cfg->type != PHY_TYPE_USB3)
+		return 0;
+
+	if (!qmp->phy_initialized) {
+		dev_vdbg(dev, "PHY not initialized, bailing out\n");
+		return 0;
+	}
+
+	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(qphy->pipe_clk);
+	if (ret) {
+		dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
+		clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+		return ret;
+	}
+
+	qcom_qmp_phy_disable_autonomous_mode(qphy);
+
 	return 0;
 }
 
@@ -1142,6 +1293,7 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 	.init		= qcom_qmp_phy_init,
 	.exit		= qcom_qmp_phy_exit,
 	.power_on	= qcom_qmp_phy_poweron,
+	.set_mode	= qcom_qmp_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
@@ -1160,7 +1312,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 
 	/*
 	 * Get memory resources for each phy lane:
-	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2; and
+	 * pcs_misc (optional) -> 3.
 	 */
 	qphy->tx = of_iomap(np, 0);
 	if (!qphy->tx)
@@ -1174,6 +1327,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	if (!qphy->pcs)
 		return -ENOMEM;
 
+	qphy->pcs_misc = of_iomap(np, 3);
+	if (!qphy->pcs_misc)
+		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+
 	/*
 	 * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
 	 * based phys, so they essentially have pipe clock. So,
@@ -1240,6 +1397,11 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 };
 MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
 
+static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
+	SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
+			   qcom_qmp_phy_runtime_resume, NULL)
+};
+
 static int qcom_qmp_phy_probe(struct platform_device *pdev)
 {
 	struct qcom_qmp *qmp;
@@ -1308,12 +1470,21 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	id = 0;
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
 	for_each_available_child_of_node(dev->of_node, child) {
 		/* Create per-lane phy */
 		ret = qcom_qmp_phy_create(dev, child, id);
 		if (ret) {
 			dev_err(dev, "failed to create lane%d phy, %d\n",
 				id, ret);
+			pm_runtime_disable(dev);
 			return ret;
 		}
 
@@ -1325,6 +1496,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(qmp->dev,
 				"failed to register pipe clock source\n");
+			pm_runtime_disable(dev);
 			return ret;
 		}
 		id++;
@@ -1333,6 +1505,8 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (!IS_ERR(phy_provider))
 		dev_info(dev, "Registered Qcom-QMP phy\n");
+	else
+		pm_runtime_disable(dev);
 
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
@@ -1341,6 +1515,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 	.probe		= qcom_qmp_phy_probe,
 	.driver = {
 		.name	= "qcom-qmp-phy",
+		.pm	= &qcom_qmp_phy_pm_ops,
 		.of_match_table = qcom_qmp_phy_of_match_table,
 	},
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 944269a..d1c6905 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -274,4 +274,7 @@
 #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
 #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
 
+/* Only for QMP V3 PHY - PCS_MISC registers */
+#define QPHY_V3_PCS_MISC_CLAMP_ENABLE			0x0c
+
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 17/17] phy: add SPDX identifier to QMP and QUSB2 PHY drivers

[Manu Gautam]

The SPDX identifier is a legally binding shorthand, which
can be used instead of the full boiler plate text.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c   | 11 +----------
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 10 +---------
 2 files changed, 2 insertions(+), 19 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index ba6c5b2..6470c5d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2017, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/clk.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index f1e4a64..94afeac 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2017, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project