From: Peter Samuelson <peter@cadcamlab.org>
To: Greg Banks <gnb@alphalink.com.au>
Cc: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>,
linux-kernel@vger.kernel.org, kbuild-devel@lists.sourceforge.net
Subject: Re: [kbuild-devel] Re: [patch] config language dep_* enhancements
Date: Tue, 13 Aug 2002 22:28:41 -0500 [thread overview]
Message-ID: <20020814032841.GM761@cadcamlab.org> (raw)
In-Reply-To: <3D59AEB7.7B80F33@alphalink.com.au>
[-- Attachment #1: Type: text/plain, Size: 1207 bytes --]
[Greg Banks]
[I wrote]
> > (BTW, the format is great - I can use 'M-x compile' and 'M-x
> > next-error' and Emacs pulls up files and lines for me.)
>
> This is not a coincidence.
Indeed not - if you hadn't already used that format I would have
munged it. Grew up on gcc, so this is my favorite error message
format. Yours too, I guess. (:
> > CONFIG_SCSI should be defined earlier, like in the "Block Devices"
> > menu. Then again, 'sg' is not a block device so this isn't strictly
> > correct. Perhaps a "kernel subsystems" submenu under "general setup",
> > or even as a toplevel menu.
>
> Sounds like a good idea. You could put CONFIG_SERIAL and CONFIG_PCMCIA
> in there too.
CONFIG_SERIAL and CONFIG_PCMCIA didn't generate any noise, though.
Minimum necessary change and all that. It's easy enough to add later,
if desired.
Here's a start. It looks a little hacky but it does fix real issues.
I decided to combine "general setup", "module config" and "major
subsystems" - the latter needs to come after modules but really
belongs with general setup. Eh?
I think the first patch belongs on trivial@rustcorp - what's the
protocol there, just an email cc? Attach or inline? etc.
Peter
[-- Attachment #2: 1.diff --]
[-- Type: text/plain, Size: 1663 bytes --]
diff -urNXxpk 2.5.31/arch/alpha/config.in 2.5.31-1/arch/alpha/config.in
--- 2.5.31/arch/alpha/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-1/arch/alpha/config.in 2002-08-13 20:49:18.000000000 -0500
@@ -340,6 +340,10 @@
fi
endmenu
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source drivers/input/Config.in
source drivers/char/Config.in
#source drivers/misc/Config.in
@@ -375,7 +379,6 @@
endmenu
source drivers/usb/Config.in
-source drivers/input/Config.in
source net/bluetooth/Config.in
diff -urNXxpk 2.5.31/arch/mips/config.in 2.5.31-1/arch/mips/config.in
--- 2.5.31/arch/mips/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-1/arch/mips/config.in 2002-08-13 20:48:35.000000000 -0500
@@ -400,6 +400,10 @@
fi
endmenu
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source drivers/input/Config.in
source drivers/char/Config.in
source drivers/media/Config.in
@@ -485,7 +489,6 @@
fi
source drivers/usb/Config.in
-source drivers/input/Config.in
mainmenu_option next_comment
comment 'Kernel hacking'
diff -urNXxpk 2.5.31/arch/mips64/config.in 2.5.31-1/arch/mips64/config.in
--- 2.5.31/arch/mips64/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-1/arch/mips64/config.in 2002-08-13 20:49:00.000000000 -0500
@@ -191,6 +191,10 @@
fi
endmenu
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source drivers/input/Config.in
source drivers/char/Config.in
#source drivers/misc/Config.in
@@ -232,7 +236,6 @@
fi
source drivers/usb/Config.in
-source drivers/input/Config.in
mainmenu_option next_comment
comment 'Kernel hacking'
[-- Attachment #3: 2.diff --]
[-- Type: text/plain, Size: 14148 bytes --]
diff -urNXxpk 2.5.31-1/arch/alpha/config.in 2.5.31-2/arch/alpha/config.in
--- 2.5.31-1/arch/alpha/config.in 2002-08-13 20:49:18.000000000 -0500
+++ 2.5.31-2/arch/alpha/config.in 2002-08-13 22:07:23.000000000 -0500
@@ -299,15 +299,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
if [ "$CONFIG_PCI" = "y" ]; then
source drivers/message/fusion/Config.in
diff -urNXxpk 2.5.31-1/arch/arm/config.in 2.5.31-2/arch/arm/config.in
--- 2.5.31-1/arch/arm/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/arm/config.in 2002-08-13 22:07:42.000000000 -0500
@@ -559,15 +559,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
if [ "$CONFIG_ARCH_CLPS711X" = "y" ]; then
source drivers/ssi/Config.in
diff -urNXxpk 2.5.31-1/arch/cris/config.in 2.5.31-2/arch/cris/config.in
--- 2.5.31-1/arch/cris/config.in 2002-07-27 04:14:32.000000000 -0500
+++ 2.5.31-2/arch/cris/config.in 2002-08-13 22:08:01.000000000 -0500
@@ -153,15 +153,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/ieee1394/Config.in
diff -urNXxpk 2.5.31-1/arch/i386/config.in 2.5.31-2/arch/i386/config.in
--- 2.5.31-1/arch/i386/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/i386/config.in 2002-08-13 22:05:49.000000000 -0500
@@ -311,15 +311,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI device support'
-
-tristate 'SCSI device support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI device support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
mainmenu_option next_comment
comment 'Old non-SCSI/ATAPI CD-ROM drives'
diff -urNXxpk 2.5.31-1/arch/ia64/config.in 2.5.31-2/arch/ia64/config.in
--- 2.5.31-1/arch/ia64/config.in 2002-08-08 22:43:27.000000000 -0500
+++ 2.5.31-2/arch/ia64/config.in 2002-08-13 22:08:38.000000000 -0500
@@ -157,15 +157,12 @@
endmenu
fi # !HP_SIM
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
diff -urNXxpk 2.5.31-1/arch/m68k/config.in 2.5.31-2/arch/m68k/config.in
--- 2.5.31-1/arch/m68k/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/m68k/config.in 2002-08-13 22:09:34.000000000 -0500
@@ -172,12 +172,9 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI device support'
-
-tristate 'SCSI device support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI device support'
comment 'SCSI support type (disk, tape, CD-ROM)'
@@ -266,9 +263,8 @@
fi
endmenu
-
+ endmenu
fi
-endmenu
if [ "$CONFIG_NET" = "y" ]; then
diff -urNXxpk 2.5.31-1/arch/mips/config.in 2.5.31-2/arch/mips/config.in
--- 2.5.31-1/arch/mips/config.in 2002-08-13 20:48:35.000000000 -0500
+++ 2.5.31-2/arch/mips/config.in 2002-08-13 22:09:54.000000000 -0500
@@ -356,15 +356,13 @@
endmenu
fi
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
if [ "$CONFIG_DECSTATION" != "y" -a \
"$CONFIG_SGI_IP22" != "y" ]; then
diff -urNXxpk 2.5.31-1/arch/mips64/config.in 2.5.31-2/arch/mips64/config.in
--- 2.5.31-1/arch/mips64/config.in 2002-08-13 20:49:00.000000000 -0500
+++ 2.5.31-2/arch/mips64/config.in 2002-08-13 22:10:16.000000000 -0500
@@ -150,15 +150,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
#source drivers/message/i2o/Config.in
diff -urNXxpk 2.5.31-1/arch/parisc/config.in 2.5.31-2/arch/parisc/config.in
--- 2.5.31-1/arch/parisc/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/parisc/config.in 2002-08-13 22:13:42.000000000 -0500
@@ -103,12 +103,10 @@
source net/Config.in
fi
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
+
comment 'SCSI support type (disk, tape, CDrom)'
dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
@@ -145,8 +143,8 @@
bool ' use normal IO' CONFIG_SCSI_NCR53C8XX_IOMAPPED
fi
endmenu
+ endmenu
fi
-endmenu
if [ "$CONFIG_NET" = "y" ]; then
mainmenu_option next_comment
diff -urNXxpk 2.5.31-1/arch/ppc/config.in 2.5.31-2/arch/ppc/config.in
--- 2.5.31-1/arch/ppc/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/ppc/config.in 2002-08-13 22:14:09.000000000 -0500
@@ -434,13 +434,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/message/fusion/Config.in
diff -urNXxpk 2.5.31-1/arch/ppc64/config.in 2.5.31-2/arch/ppc64/config.in
--- 2.5.31-1/arch/ppc64/config.in 2002-07-27 04:14:32.000000000 -0500
+++ 2.5.31-2/arch/ppc64/config.in 2002-08-13 22:14:24.000000000 -0500
@@ -103,13 +103,12 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/message/fusion/Config.in
diff -urNXxpk 2.5.31-1/arch/s390/config.in 2.5.31-2/arch/s390/config.in
--- 2.5.31-1/arch/s390/config.in 2002-07-27 04:14:33.000000000 -0500
+++ 2.5.31-2/arch/s390/config.in 2002-08-13 22:11:47.000000000 -0500
@@ -47,15 +47,13 @@
bool 'VM shared kernel support' CONFIG_SHARED_KERNEL
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/s390/Config.in
diff -urNXxpk 2.5.31-1/arch/s390x/config.in 2.5.31-2/arch/s390x/config.in
--- 2.5.31-1/arch/s390x/config.in 2002-07-27 04:14:33.000000000 -0500
+++ 2.5.31-2/arch/s390x/config.in 2002-08-13 22:11:48.000000000 -0500
@@ -50,15 +50,13 @@
bool 'VM shared kernel support' CONFIG_SHARED_KERNEL
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/s390/Config.in
diff -urNXxpk 2.5.31-1/arch/sh/config.in 2.5.31-2/arch/sh/config.in
--- 2.5.31-1/arch/sh/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/sh/config.in 2002-08-13 22:11:50.000000000 -0500
@@ -223,15 +223,13 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/ieee1394/Config.in
diff -urNXxpk 2.5.31-1/arch/sparc/config.in 2.5.31-2/arch/sparc/config.in
--- 2.5.31-1/arch/sparc/config.in 2002-08-11 15:08:07.000000000 -0500
+++ 2.5.31-2/arch/sparc/config.in 2002-08-13 22:14:51.000000000 -0500
@@ -112,12 +112,10 @@
source drivers/isdn/Config.in
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
+
comment 'SCSI support type (disk, tape, CDrom)'
dep_tristate ' SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
@@ -152,8 +150,8 @@
dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
dep_tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
endmenu
+ endmenu
fi
-endmenu
source drivers/fc4/Config.in
diff -urNXxpk 2.5.31-1/arch/sparc64/config.in 2.5.31-2/arch/sparc64/config.in
--- 2.5.31-1/arch/sparc64/config.in 2002-08-11 15:08:09.000000000 -0500
+++ 2.5.31-2/arch/sparc64/config.in 2002-08-13 22:15:12.000000000 -0500
@@ -111,12 +111,10 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
-
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
+
comment 'SCSI support type (disk, tape, CDrom)'
dep_tristate ' SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
@@ -195,8 +193,8 @@
fi
endmenu
+ endmenu
fi
-endmenu
source drivers/fc4/Config.in
diff -urNXxpk 2.5.31-1/arch/x86_64/config.in 2.5.31-2/arch/x86_64/config.in
--- 2.5.31-1/arch/x86_64/config.in 2002-07-27 04:14:33.000000000 -0500
+++ 2.5.31-2/arch/x86_64/config.in 2002-08-13 22:11:44.000000000 -0500
@@ -137,15 +137,13 @@
fi
endmenu
-mainmenu_option next_comment
-comment 'SCSI support'
-
-tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'SCSI support'
source drivers/scsi/Config.in
+ endmenu
fi
-endmenu
source drivers/message/fusion/Config.in
diff -urNXxpk 2.5.31-1/drivers/i2c/Config.in 2.5.31-2/drivers/i2c/Config.in
--- 2.5.31-1/drivers/i2c/Config.in 2002-07-19 09:14:57.000000000 -0500
+++ 2.5.31-2/drivers/i2c/Config.in 2002-08-13 22:18:35.000000000 -0500
@@ -1,14 +1,10 @@
#
-# Character device configuration
+# I2C device configuration
#
-mainmenu_option next_comment
-comment 'I2C support'
-
-tristate 'I2C support' CONFIG_I2C
-
if [ "$CONFIG_I2C" != "n" ]; then
+ mainmenu_option next_comment
+ comment 'I2C support'
- dep_tristate 'I2C bit-banging interfaces' CONFIG_I2C_ALGOBIT $CONFIG_I2C
if [ "$CONFIG_I2C_ALGOBIT" != "n" ]; then
dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_PHILIPSPAR $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT
dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT
@@ -45,5 +41,5 @@
dep_tristate 'I2C device interface' CONFIG_I2C_CHARDEV $CONFIG_I2C
dep_tristate 'I2C /proc interface (required for hardware sensors)' CONFIG_I2C_PROC $CONFIG_I2C $CONFIG_SYSCTL
+ endmenu
fi
-endmenu
diff -urNXxpk 2.5.31-1/drivers/input/Config.in 2.5.31-2/drivers/input/Config.in
--- 2.5.31-1/drivers/input/Config.in 2002-07-19 09:15:13.000000000 -0500
+++ 2.5.31-2/drivers/input/Config.in 2002-08-13 21:31:16.000000000 -0500
@@ -5,8 +5,6 @@
mainmenu_option next_comment
comment 'Input device support'
-tristate 'Input core support' CONFIG_INPUT
-
comment 'Userland interfaces'
dep_tristate ' Keyboard interface' CONFIG_INPUT_KEYBDEV $CONFIG_INPUT
dep_tristate ' Mouse interface' CONFIG_INPUT_MOUSEDEV $CONFIG_INPUT
diff -urNXxpk 2.5.31-1/drivers/usb/Config.in 2.5.31-2/drivers/usb/Config.in
--- 2.5.31-1/drivers/usb/Config.in 2002-06-09 00:29:12.000000000 -0500
+++ 2.5.31-2/drivers/usb/Config.in 2002-08-13 21:23:18.000000000 -0500
@@ -1,17 +1,10 @@
#
# USB device configuration
#
-mainmenu_option next_comment
-comment 'USB support'
-
-# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
-if [ "$CONFIG_PCI" = "y" -o "$CONFIG_SA1111" = "y" ]; then
- tristate 'Support for USB' CONFIG_USB
-else
- define_bool CONFIG_USB n
-fi
-
if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then
+ mainmenu_option next_comment
+ comment 'USB support'
+
source drivers/usb/core/Config.in
source drivers/usb/host/Config.in
@@ -39,6 +32,5 @@
dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' Tieman Voyager USB Braille display support (EXPERIMENTAL)' CONFIG_USB_BRLVGER $CONFIG_USB $CONFIG_EXPERIMENTAL
-
+ endmenu
fi
-endmenu
diff -urNXxpk 2.5.31-1/init/Config.in 2.5.31-2/init/Config.in
--- 2.5.31-1/init/Config.in 2002-06-09 00:27:27.000000000 -0500
+++ 2.5.31-2/init/Config.in 2002-08-13 22:03:13.000000000 -0500
@@ -9,13 +9,30 @@
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
-endmenu
-mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
bool ' Set version information on all module symbols' CONFIG_MODVERSIONS
bool ' Kernel module loader' CONFIG_KMOD
fi
+
+comment 'Other major subsystems'
+
+tristate 'SCSI support' CONFIG_SCSI
+
+# FIXME usb should depend on (PCI || SA1111) - but that causes other ordering problems
+tristate 'USB support' CONFIG_USB
+
+# FIXME parisc, sparc didn't include this menu before - any reason?
+if [ "$CONFIG_ARCH_S390" != "y" ]; then
+ tristate 'Input core support' CONFIG_INPUT
+fi
+
+# FIXME m68k, sparc* didn't include this either but we can't test for them
+if [ "$CONFIG_ARCH_S390" != "y" -a "$CONFIG_SUPERH" != "y" ]; then
+ tristate 'I2C support' CONFIG_I2C
+ dep_tristate ' I2C bit-banging interfaces' CONFIG_I2C_ALGOBIT $CONFIG_I2C
+fi
+
endmenu
next prev parent reply other threads:[~2002-08-14 3:28 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200208062329.g76NTqP30962@devserv.devel.redhat.com.suse.lists.linux.kernel>
2002-08-07 10:01 ` Linux 2.4.20-pre1 Andi Kleen
2002-08-07 11:50 ` Alan Cox
2002-08-07 10:41 ` 64bit clean drivers was " Andi Kleen
2002-08-07 12:16 ` Alan Cox
2002-08-07 11:04 ` Andi Kleen
2002-08-07 11:10 ` Alan Cox
2002-08-07 11:18 ` Andi Kleen
2002-08-07 11:51 ` Alan Cox
2002-08-07 11:56 ` Andi Kleen
2002-08-07 13:26 ` Alan Cox
2002-08-07 16:28 ` Jeff Garzik
2002-08-08 15:14 ` Peter Samuelson
2002-08-08 16:49 ` Kai Germaschewski
2002-08-08 16:47 ` Peter Samuelson
2002-08-09 4:15 ` [patch] config language dep_* enhancements Peter Samuelson
2002-08-09 14:43 ` [kbuild-devel] " Greg Banks
2002-08-09 15:38 ` Andreas Schwab
2002-08-12 10:38 ` Greg Banks
2002-08-09 16:10 ` Peter Samuelson
2002-08-12 11:04 ` Greg Banks
2002-08-12 14:46 ` Kai Germaschewski
2002-08-12 19:45 ` Roman Zippel
2002-08-12 21:40 ` [kbuild-devel] " Tom Rini
2002-08-12 22:13 ` Roman Zippel
2002-08-12 22:15 ` Tom Rini
2002-08-12 22:32 ` Roman Zippel
2002-08-12 22:47 ` Tom Rini
2002-08-12 23:17 ` Roman Zippel
2002-08-12 23:32 ` Tom Rini
2002-08-13 3:35 ` Greg Banks
2002-08-13 0:03 ` Peter Samuelson
2002-08-13 7:54 ` Roman Zippel
2002-08-13 3:33 ` Greg Banks
2002-08-13 9:32 ` Roman Zippel
2002-08-13 10:32 ` [kbuild-devel] " Greg Banks
[not found] ` <3D587483.1C459694@alphalink.com.au>
2002-08-13 3:39 ` Peter Samuelson
2002-08-13 4:31 ` Greg Banks
2002-08-13 14:00 ` [kbuild-devel] " Greg Banks
2002-08-13 15:53 ` Peter Samuelson
2002-08-13 18:48 ` Kai Germaschewski
2002-08-14 1:13 ` Greg Banks
2002-08-14 3:28 ` Peter Samuelson [this message]
2002-08-14 4:35 ` [patch] kernel config 3/N - move sound into drivers/media Peter Samuelson
2002-08-14 5:08 ` Kai Germaschewski
2002-08-14 5:49 ` Peter Samuelson
2002-08-14 10:56 ` [kbuild-devel] " Arnd Bergmann
2002-08-14 12:20 ` S390 vs S390x, was " Christoph Hellwig
2002-08-14 17:21 ` Arnd Bergmann
2002-08-14 18:16 ` Christoph Hellwig
2002-08-14 21:18 ` Arnd Bergmann
2002-08-14 19:22 ` Christoph Hellwig
2002-08-14 22:52 ` Arnd Bergmann
2002-08-14 6:14 ` Greg Banks
2002-08-14 6:31 ` Greg Banks
2002-08-14 8:16 ` Russell King
2002-08-14 6:01 ` [kbuild-devel] Re: [patch] config language dep_* enhancements Greg Banks
2002-08-14 8:18 ` Russell King
2002-08-14 14:22 ` Peter Samuelson
2002-08-15 1:28 ` Greg Banks
2002-08-15 2:33 ` Peter Samuelson
2002-08-15 3:27 ` Greg Banks
2002-08-13 18:43 ` Kai Germaschewski
2002-08-13 20:48 ` Peter Samuelson
2002-08-14 1:27 ` Greg Banks
2002-08-14 1:42 ` Peter Samuelson
2002-08-14 2:27 ` Greg Banks
2002-08-14 2:57 ` Peter Samuelson
2002-08-14 4:39 ` Kai Germaschewski
2002-08-14 5:35 ` Greg Banks
2002-08-14 11:40 ` Roman Zippel
2002-08-15 1:52 ` [kbuild-devel] " Greg Banks
2002-08-15 3:30 ` John Alvord
2002-08-16 2:24 ` Peter Samuelson
2002-08-15 9:46 ` Roman Zippel
2002-08-15 14:43 ` Kai Germaschewski
2002-08-15 20:12 ` Roman Zippel
2002-08-16 2:08 ` Greg Banks
2002-08-16 10:54 ` Roman Zippel
2002-08-19 9:27 ` Greg Banks
2002-08-19 10:20 ` Roman Zippel
2002-08-20 14:10 ` Greg Banks
2002-08-20 17:51 ` Roman Zippel
2002-08-19 20:30 ` Sam Ravnborg
2002-08-20 14:28 ` David Woodhouse
2002-08-23 15:18 ` Kai Germaschewski
2002-08-23 23:03 ` Roman Zippel
2002-08-24 12:43 ` Greg Banks
2002-08-14 1:19 ` Greg Banks
2002-08-12 15:47 ` Peter Samuelson
2002-08-13 3:23 ` [kbuild-devel] " Greg Banks
2002-08-13 16:04 ` Sam Ravnborg
2002-08-13 16:20 ` [kbuild-devel] " Peter Samuelson
2002-08-14 0:22 ` Greg Banks
2002-08-14 20:14 ` Get rid of shell based Config.in parsers? Sam Ravnborg
2002-08-14 22:21 ` [kbuild-devel] " Peter Samuelson
2002-08-15 17:51 ` Linus Torvalds
2002-08-08 23:57 ` 64bit clean drivers was Re: Linux 2.4.20-pre1 Thunder from the hill
2002-08-08 19:23 ` Roman Zippel
2002-08-08 20:03 ` Andi Kleen
2002-08-08 20:19 ` Roman Zippel
2002-08-08 17:42 ` Peter Samuelson
2002-08-09 10:21 ` Roman Zippel
2002-08-09 11:47 ` Peter Samuelson
2002-08-09 12:07 ` Russell King
2002-08-09 12:49 ` Peter Samuelson
2002-08-09 14:53 ` [kbuild-devel] " Greg Banks
2002-08-09 22:37 ` Thunder from the hill
2002-08-08 20:37 ` Andi Kleen
2002-08-08 20:51 ` Roman Zippel
2002-08-07 17:31 ` Thunder from the hill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020814032841.GM761@cadcamlab.org \
--to=peter@cadcamlab.org \
--cc=gnb@alphalink.com.au \
--cc=kai@tp1.ruhr-uni-bochum.de \
--cc=kbuild-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®