mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@elte.hu>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>, Yinghai Lu <yinghai.lu@sun.com>,
	Yinghai Lu <yhlu.kernel@gmail.com>,
	jbarnes@virtuousgeek.org
Subject: Re: [git pull] "big box" x86 changes, bootmem/sparsemem
Date: Sat, 26 Apr 2008 22:07:08 +0200	[thread overview]
Message-ID: <20080426200708.GA14223@elte.hu> (raw)
In-Reply-To: <alpine.LFD.1.10.0804261247020.2813@woody.linux-foundation.org>


* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> Having preprocessor conditionals that mix things up is not an excuse, 
> and it might be an argument for not doing the conditional that way (ie 
> maybe just make sure that when NUMA is not on, nid/next_nid will 
> always be different, and in a way that the compiler can perhaps see 
> statically that they are different - so that you can have the 
> conditional there even with NUMA off, but the compiler will just fold 
> it away?).

for now i cleaned it up the way below, but i also queued up a cleanup 
patch separately (second patch attached below) that removes the #ifdef. 
The current version is the tested one so i'll keep that in the tree and 
will treat the cleanup separately.

	Ingo

------------------------>
Subject: x86_64: make reserve_bootmem_generic() use new reserve_bootmem()
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Tue, 18 Mar 2008 12:50:21 -0700

"mm: make reserve_bootmem can crossed the nodes" provides new
reserve_bootmem(), let reserve_bootmem_generic() use that.

reserve_bootmem_generic() is used to reserve initramdisk, so this way
we can make sure even when bootloader or kexec load ranges cross the
node memory boundaries, reserve_bootmem still works.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

Index: linux-x86.q/arch/x86/mm/init_64.c
===================================================================
--- linux-x86.q.orig/arch/x86/mm/init_64.c
+++ linux-x86.q/arch/x86/mm/init_64.c
@@ -810,7 +810,7 @@ void free_initrd_mem(unsigned long start
 void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
 {
 #ifdef CONFIG_NUMA
-	int nid = phys_to_nid(phys);
+	int nid, next_nid;
 #endif
 	unsigned long pfn = phys >> PAGE_SHIFT;
 
@@ -829,10 +829,16 @@ void __init reserve_bootmem_generic(unsi
 
 	/* Should check here against the e820 map to avoid double free */
 #ifdef CONFIG_NUMA
-	reserve_bootmem_node(NODE_DATA(nid), phys, len, BOOTMEM_DEFAULT);
+	nid = phys_to_nid(phys);
+	next_nid = phys_to_nid(phys + len - 1);
+	if (nid == next_nid)
+		reserve_bootmem_node(NODE_DATA(nid), phys, len, BOOTMEM_DEFAULT);
+	else
+		reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
 #else
 	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
 #endif
+
 	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
 		dma_reserve += len / PAGE_SIZE;
 		set_dma_reserve(dma_reserve);

------------->
Subject: x86: reserve bootmem cleanup
From: Ingo Molnar <mingo@elte.hu>
Date: Sat Apr 26 21:50:20 CEST 2008

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

Index: linux-x86.q/arch/x86/mm/init_64.c
===================================================================
--- linux-x86.q.orig/arch/x86/mm/init_64.c
+++ linux-x86.q/arch/x86/mm/init_64.c
@@ -810,10 +810,8 @@ void free_initrd_mem(unsigned long start
 
 void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
 {
-#ifdef CONFIG_NUMA
-	int nid, next_nid;
-#endif
 	unsigned long pfn = phys >> PAGE_SHIFT;
+	int nid, next_nid;
 
 	if (pfn >= end_pfn) {
 		/*
@@ -829,16 +827,12 @@ void __init reserve_bootmem_generic(unsi
 	}
 
 	/* Should check here against the e820 map to avoid double free */
-#ifdef CONFIG_NUMA
 	nid = phys_to_nid(phys);
 	next_nid = phys_to_nid(phys + len - 1);
 	if (nid == next_nid)
 		reserve_bootmem_node(NODE_DATA(nid), phys, len, BOOTMEM_DEFAULT);
 	else
 		reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
-#endif
 
 	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
 		dma_reserve += len / PAGE_SIZE;

  reply	other threads:[~2008-04-26 20:07 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-26 18:55 [RFC git pull] "big box" x86 changes Ingo Molnar
2008-04-26 19:05 ` Stefan Richter
2008-04-26 19:21   ` Ingo Molnar
2008-04-26 19:12 ` Linus Torvalds
2008-04-26 19:41   ` [git pull] "big box" x86 changes, bootmem/sparsemem Ingo Molnar
2008-04-26 19:52     ` Linus Torvalds
2008-04-26 20:07       ` Ingo Molnar [this message]
2008-04-26 20:08       ` [git pull] "big box" x86 changes, bootmem/sparsemem, #2 Ingo Molnar
2008-04-26 20:30         ` Linus Torvalds
2008-04-26 20:55           ` [git pull] "big box" x86 changes, bootmem/sparsemem, #3 Ingo Molnar
2008-04-27 22:48     ` [git pull] "big box" x86 changes, bootmem/sparsemem Johannes Weiner
2008-04-27 23:46       ` Ingo Molnar
2008-04-28  0:19         ` Johannes Weiner
2008-04-28  0:40           ` [patch] mm: node-setup agnostic free_bootmem() Ingo Molnar
2008-04-28  1:48             ` Yinghai Lu
2008-04-28 16:54               ` Johannes Weiner
2008-04-28 19:11                 ` Yinghai Lu
2008-04-28 19:55                   ` Yinghai Lu
2008-04-30 10:50                     ` Johannes Weiner
2008-04-30 16:22                       ` Yinghai Lu
2008-04-30 17:52                         ` Johannes Weiner
2008-04-30 20:30                           ` Yinghai Lu
2008-04-28 16:49             ` Johannes Weiner
2008-04-29 14:25               ` Ingo Molnar
2008-04-30 10:52                 ` Johannes Weiner
2008-04-28  0:33       ` [git pull] "big box" x86 changes, bootmem/sparsemem Yinghai Lu
2008-04-28 16:58         ` Johannes Weiner
2008-04-26 19:54   ` [git pull] "big box" x86 changes, boot protocol Ingo Molnar
2008-04-26 20:39     ` Andrew Morton
2008-04-26 21:06       ` Adrian Bunk
2008-04-26 21:10         ` H. Peter Anvin
2008-04-26 21:11         ` Linus Torvalds
2008-04-26 21:17           ` Ingo Molnar
2008-04-26 23:37       ` Jeremy Fitzhardinge
2008-04-27 11:21     ` Ian Campbell
2008-04-27 19:29       ` H. Peter Anvin
2008-04-28 15:27       ` Ingo Molnar
2008-04-26 20:24   ` [RFC git pull] "big box" x86 changes, GART Ingo Molnar
2008-04-26 20:26     ` Ingo Molnar
2008-04-26 21:55   ` [git pull] "big box" x86 changes, PCI Ingo Molnar
2008-04-27 16:30     ` Jesse Barnes
2008-04-28 15:38       ` Ingo Molnar
2008-04-28 20:34     ` Jesse Barnes
2008-04-28 22:53       ` Yinghai Lu
2008-04-28 23:27       ` [PATCH] x86/pci: remove flag in pci_cfg_space_size_ext Yinghai Lu
2008-04-29 16:14         ` Jesse Barnes
2008-04-29 22:05           ` Ingo Molnar
2008-04-29 22:34             ` Jesse Barnes
2008-04-26 22:17 ` [RFC git pull] "big box" x86 changes Andi Kleen
2008-04-27  3:14   ` Yinghai Lu
2008-04-27  8:30     ` Andi Kleen
2008-04-27  8:32     ` [RFC git pull] "big box" x86 changes II Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080426200708.GA14223@elte.hu \
    --to=mingo@elte.hu \
    --cc=akpm@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=yhlu.kernel@gmail.com \
    --cc=yinghai.lu@sun.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome