mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Howells <dhowells@redhat.com>
To: linux-am33-list@redhat.com
Cc: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 06/43] Typedef SMP call function pointer
Date: Tue, 26 Oct 2010 03:53:34 +0100	[thread overview]
Message-ID: <20101026025333.23512.76163.stgit@warthog.procyon.org.uk> (raw)
In-Reply-To: <20101026025301.23512.24525.stgit@warthog.procyon.org.uk>

Typedef the pointer to the function to be called by smp_call_function() and
friends:

	typedef void (*smp_call_func_t)(void *info);

as it is used in a fair number of places.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-arch@vger.kernel.org
---

 include/linux/smp.h |   19 ++++++++++---------
 kernel/smp.c        |    8 ++++----
 2 files changed, 14 insertions(+), 13 deletions(-)


diff --git a/include/linux/smp.h b/include/linux/smp.h
index cfa2d20..6dc95ca 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -13,9 +13,10 @@
 
 extern void cpu_idle(void);
 
+typedef void (*smp_call_func_t)(void *info);
 struct call_single_data {
 	struct list_head list;
-	void (*func) (void *info);
+	smp_call_func_t func;
 	void *info;
 	u16 flags;
 	u16 priv;
@@ -24,8 +25,8 @@ struct call_single_data {
 /* total number of cpus in this system (may exceed NR_CPUS) */
 extern unsigned int total_cpus;
 
-int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
-				int wait);
+int smp_call_function_single(int cpuid, smp_call_func_t func, void *info,
+			     int wait);
 
 #ifdef CONFIG_SMP
 
@@ -69,15 +70,15 @@ extern void smp_cpus_done(unsigned int max_cpus);
 /*
  * Call a function on all other processors
  */
-int smp_call_function(void(*func)(void *info), void *info, int wait);
+int smp_call_function(smp_call_func_t func, void *info, int wait);
 void smp_call_function_many(const struct cpumask *mask,
-			    void (*func)(void *info), void *info, bool wait);
+			    smp_call_func_t func, void *info, bool wait);
 
 void __smp_call_function_single(int cpuid, struct call_single_data *data,
 				int wait);
 
 int smp_call_function_any(const struct cpumask *mask,
-			  void (*func)(void *info), void *info, int wait);
+			  smp_call_func_t func, void *info, int wait);
 
 /*
  * Generic and arch helpers
@@ -94,7 +95,7 @@ void ipi_call_unlock_irq(void);
 /*
  * Call a function on all processors
  */
-int on_each_cpu(void (*func) (void *info), void *info, int wait);
+int on_each_cpu(smp_call_func_t func, void *info, int wait);
 
 #define MSG_ALL_BUT_SELF	0x8000	/* Assume <32768 CPU's */
 #define MSG_ALL			0x8001
@@ -122,7 +123,7 @@ static inline void smp_send_stop(void) { }
  *	These macros fold the SMP functionality into a single CPU system
  */
 #define raw_smp_processor_id()			0
-static inline int up_smp_call_function(void (*func)(void *), void *info)
+static inline int up_smp_call_function(smp_call_func_t func, void *info)
 {
 	return 0;
 }
@@ -143,7 +144,7 @@ static inline void smp_send_reschedule(int cpu) { }
 static inline void init_call_single_data(void) { }
 
 static inline int
-smp_call_function_any(const struct cpumask *mask, void (*func)(void *info),
+smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
 		      void *info, int wait)
 {
 	return smp_call_function_single(0, func, info, wait);
diff --git a/kernel/smp.c b/kernel/smp.c
index ed6aacf..12ed8b0 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -267,7 +267,7 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(struct call_single_data, csd_data);
  *
  * Returns 0 on success, else a negative status code.
  */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+int smp_call_function_single(int cpu, smp_call_func_t func, void *info,
 			     int wait)
 {
 	struct call_single_data d = {
@@ -336,7 +336,7 @@ EXPORT_SYMBOL(smp_call_function_single);
  *	3) any other online cpu in @mask
  */
 int smp_call_function_any(const struct cpumask *mask,
-			  void (*func)(void *info), void *info, int wait)
+			  smp_call_func_t func, void *info, int wait)
 {
 	unsigned int cpu;
 	const struct cpumask *nodemask;
@@ -416,7 +416,7 @@ void __smp_call_function_single(int cpu, struct call_single_data *data,
  * must be disabled when calling this function.
  */
 void smp_call_function_many(const struct cpumask *mask,
-			    void (*func)(void *), void *info, bool wait)
+			    smp_call_func_t func, void *info, bool wait)
 {
 	struct call_function_data *data;
 	unsigned long flags;
@@ -500,7 +500,7 @@ EXPORT_SYMBOL(smp_call_function_many);
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler.
  */
-int smp_call_function(void (*func)(void *), void *info, int wait)
+int smp_call_function(smp_call_func_t func, void *info, int wait)
 {
 	preempt_disable();
 	smp_call_function_many(cpu_online_mask, func, info, wait);


  parent reply	other threads:[~2010-10-26  2:53 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-26  2:53 [PATCH 00/43] MN10300: Add SMP support and AM34 CPU core support David Howells
2010-10-26  2:53 ` [PATCH 01/43] Partially revert patch that encloses asm-offset.h numbers in brackets David Howells
2010-10-26  2:53 ` [PATCH 02/43] MN10300: BUG to BUG_ON changes David Howells
2010-10-26  2:53 ` [PATCH 03/43] bitops: Change the bitmap index from int to unsigned long [mn10300] David Howells
2010-10-26  2:53 ` [PATCH 04/43] mn10300: Use pci_claim_resource David Howells
2010-10-26  2:53 ` [PATCH 05/43] MN10300: Prevent cnt32_to_63() from being preempted in sched_clock() David Howells
2010-10-26  2:53 ` David Howells [this message]
2010-10-26  2:53 ` [PATCH 07/43] MN10300: Don't cast away the volatile in test_bit() David Howells
2010-10-26  2:53 ` [PATCH 08/43] MN10300: Add reads[bwl]() and writes[bwl]() David Howells
2010-10-26  2:53 ` [PATCH 09/43] MN10300: Provide the functions to fully disable maskable interrupts David Howells
2010-10-26  2:53 ` [PATCH 10/43] MN10300: Differentiate AM33_2 and AM33_3 in config David Howells
2010-10-26  2:54 ` [PATCH 11/43] MN10300: Move DMA engine control reg defs to MN103E010 processor directory David Howells
2010-10-26  2:54 ` [PATCH 12/43] MN10300: Don't hard code the cacheline size in register defs David Howells
2010-10-26  2:54 ` [PATCH 13/43] MN10300: Add CPU register bits for AM34 David Howells
2010-10-26  2:54 ` [PATCH 14/43] MN10300: Remove monitor/JTAG functions David Howells
2010-10-26  2:54 ` [PATCH 15/43] MN10300: Cache: Split cache bits out of arch Kconfig David Howells
2010-10-26  2:54 ` [PATCH 16/43] MN10300: Provide a MN10300_CACHE_ENABLED config option David Howells
2010-10-26  2:54 ` [PATCH 17/43] MN10300: Reorder asm/cacheflush.h to put primitives first David Howells
2010-10-26  2:54 ` [PATCH 18/43] MN10300: AM34: The current cacheflush routines operate by controlling tag regs David Howells
2010-10-26  2:54 ` [PATCH 19/43] MN10300: Cacheflush functions should take unsigned long addresses David Howells
2010-10-26  2:54 ` [PATCH 20/43] MN10300: SMP: Differentiate local cache flushing David Howells
2010-10-26  2:54 ` [PATCH 21/43] MN10300: AM34: Add cacheflushing by using the AM34 purge registers David Howells
2010-10-26  2:54 ` [PATCH 22/43] MN10300: Allow some cacheflushes to be avoided if cache snooping is available David Howells
2010-10-26  2:55 ` [PATCH 23/43] MN10300: Cache: Implement SMP global cache flushing David Howells
2010-10-26  2:55 ` [PATCH 24/43] MN10300: Make the boot wrapper able to use writeback caching David Howells
2010-10-26  2:55 ` [PATCH 25/43] MN10300: AM34 erratum requires MMUCTR read and write on exception entry David Howells
2010-10-26  2:55 ` [PATCH 26/43] MN10300: Rename __flush_tlb*() to local_flush_tlb*() David Howells
2010-10-26  2:55 ` [PATCH 27/43] MN10300: Make the use of PIDR to mark TLB entries controllable David Howells
2010-10-26  2:55 ` [PATCH 28/43] MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control David Howells
2010-10-26  2:55 ` [PATCH 29/43] MN10300: SMP TLB flushing David Howells
2010-10-26  2:55 ` [PATCH 30/43] MN10300: Make the FPU operate in non-lazy mode under SMP David Howells
2010-10-26  2:55 ` [PATCH 31/43] MN10300: Implement atomic ops using atomic ops unit David Howells
2010-10-26  2:55 ` [PATCH 32/43] MN10300: Optimise do_csum() David Howells
2010-10-26  2:55 ` [PATCH 33/43] MN10300: Make various interrupt priority settings configurable David Howells
2010-10-26  2:56 ` [PATCH 34/43] MN10300: Delete idle_timestamp from irq_cpustat_t David Howells
2010-10-26  2:56 ` [PATCH 35/43] MN10300: And Panasonic AM34 subarch and implement SMP David Howells
2010-10-27 13:31   ` [Linux-am33-list] " Suzuki Takashi
2010-10-27 14:33   ` David Howells
2010-10-26  2:56 ` [PATCH 36/43] MN10300: ASB2364: Add support for SMSC911X and SMC911X David Howells
2010-10-26  2:56 ` [PATCH 37/43] MN10300: Map userspace atomic op regs as a vmalloc page David Howells
2010-10-26  2:56 ` [PATCH 38/43] MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support David Howells
2010-10-26  2:56 ` [PATCH 39/43] MN10300: Generic time support David Howells
2010-10-26  2:56 ` [PATCH 40/43] MN10300: Update the ASB2303 defconfig David Howells
2010-10-26  2:56 ` [PATCH 41/43] MN10300: Create a defconfig for the ASB2364 board David Howells
2010-10-26  2:56 ` [PATCH 42/43] MN10300: Change "Matsushita" to "Panasonic" David Howells
2010-10-26  2:56 ` [PATCH 43/43] MN10300: Save frame pointer in thread_info struct rather than global var David Howells
2010-10-26  3:07 ` [PATCH 00/43] MN10300: Add SMP support and AM34 CPU core support David Howells

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101026025333.23512.76163.stgit@warthog.procyon.org.uk \
    --to=dhowells@redhat.com \
    --cc=linux-am33-list@redhat.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®