From: David Howells <dhowells@redhat.com>
To: linux-am33-list@redhat.com
Cc: linux-kernel@vger.kernel.org,
Akira Takeuchi <takeuchi.akr@jp.panasonic.com>,
Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Subject: [PATCH 09/43] MN10300: Provide the functions to fully disable maskable interrupts
Date: Tue, 26 Oct 2010 03:53:50 +0100 [thread overview]
Message-ID: <20101026025350.23512.40273.stgit@warthog.procyon.org.uk> (raw)
In-Reply-To: <20101026025301.23512.24525.stgit@warthog.procyon.org.uk>
From: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
The local_irq_disable() function and co. merely raise the interrupt mask on the
MN10300 arch to exclude normal interrupts. This still lets other, higher
priority maskable interrupts through, such as are used to service gdbstub's
serial port and the MN10300 on-chip serial port virtual FIFOs.
Provide functions to allow the maskable interrupts to be fully disabled, which
will exclude those interrupts.
Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
---
arch/mn10300/include/asm/irqflags.h | 77 +++++++++++++++++++++++++++++++++++
1 files changed, 77 insertions(+), 0 deletions(-)
diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h
index 5e529a1..f1b64b2 100644
--- a/arch/mn10300/include/asm/irqflags.h
+++ b/arch/mn10300/include/asm/irqflags.h
@@ -119,5 +119,82 @@ static inline void arch_safe_halt(void)
: "cc");
}
+static inline void arch_local_cli(void)
+{
+ asm volatile(
+ " and %0,epsw \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ :
+ : "i"(~EPSW_IE)
+ : "memory"
+ );
+}
+
+static inline unsigned long arch_local_cli_save(void)
+{
+ unsigned long flags = arch_local_save_flags();
+ arch_local_cli();
+ return flags;
+}
+
+static inline void arch_local_sti(void)
+{
+ asm volatile(
+ " or %0,epsw \n"
+ :
+ : "i"(EPSW_IE)
+ : "memory");
+}
+
+static inline void arch_local_change_intr_mask_level(unsigned long level)
+{
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE | level)
+ : "cc", "memory");
+}
+
+#else /* !__ASSEMBLY__ */
+
+#define LOCAL_SAVE_FLAGS(reg) \
+ mov epsw,reg
+
+#define LOCAL_IRQ_DISABLE \
+ and ~EPSW_IM,epsw; \
+ or EPSW_IE|MN10300_CLI_LEVEL,epsw; \
+ nop; \
+ nop; \
+ nop
+
+#define LOCAL_IRQ_ENABLE \
+ or EPSW_IE|EPSW_IM_7,epsw
+
+#define LOCAL_IRQ_RESTORE(reg) \
+ mov reg,epsw
+
+#define LOCAL_CLI_SAVE(reg) \
+ mov epsw,reg; \
+ and ~EPSW_IE,epsw; \
+ nop; \
+ nop; \
+ nop
+
+#define LOCAL_CLI \
+ and ~EPSW_IE,epsw; \
+ nop; \
+ nop; \
+ nop
+
+#define LOCAL_STI \
+ or EPSW_IE,epsw
+
+#define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \
+ and ~EPSW_IM,epsw; \
+ or EPSW_IE|(level),epsw
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_IRQFLAGS_H */
next prev parent reply other threads:[~2010-10-26 2:54 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-26 2:53 [PATCH 00/43] MN10300: Add SMP support and AM34 CPU core support David Howells
2010-10-26 2:53 ` [PATCH 01/43] Partially revert patch that encloses asm-offset.h numbers in brackets David Howells
2010-10-26 2:53 ` [PATCH 02/43] MN10300: BUG to BUG_ON changes David Howells
2010-10-26 2:53 ` [PATCH 03/43] bitops: Change the bitmap index from int to unsigned long [mn10300] David Howells
2010-10-26 2:53 ` [PATCH 04/43] mn10300: Use pci_claim_resource David Howells
2010-10-26 2:53 ` [PATCH 05/43] MN10300: Prevent cnt32_to_63() from being preempted in sched_clock() David Howells
2010-10-26 2:53 ` [PATCH 06/43] Typedef SMP call function pointer David Howells
2010-10-26 2:53 ` [PATCH 07/43] MN10300: Don't cast away the volatile in test_bit() David Howells
2010-10-26 2:53 ` [PATCH 08/43] MN10300: Add reads[bwl]() and writes[bwl]() David Howells
2010-10-26 2:53 ` David Howells [this message]
2010-10-26 2:53 ` [PATCH 10/43] MN10300: Differentiate AM33_2 and AM33_3 in config David Howells
2010-10-26 2:54 ` [PATCH 11/43] MN10300: Move DMA engine control reg defs to MN103E010 processor directory David Howells
2010-10-26 2:54 ` [PATCH 12/43] MN10300: Don't hard code the cacheline size in register defs David Howells
2010-10-26 2:54 ` [PATCH 13/43] MN10300: Add CPU register bits for AM34 David Howells
2010-10-26 2:54 ` [PATCH 14/43] MN10300: Remove monitor/JTAG functions David Howells
2010-10-26 2:54 ` [PATCH 15/43] MN10300: Cache: Split cache bits out of arch Kconfig David Howells
2010-10-26 2:54 ` [PATCH 16/43] MN10300: Provide a MN10300_CACHE_ENABLED config option David Howells
2010-10-26 2:54 ` [PATCH 17/43] MN10300: Reorder asm/cacheflush.h to put primitives first David Howells
2010-10-26 2:54 ` [PATCH 18/43] MN10300: AM34: The current cacheflush routines operate by controlling tag regs David Howells
2010-10-26 2:54 ` [PATCH 19/43] MN10300: Cacheflush functions should take unsigned long addresses David Howells
2010-10-26 2:54 ` [PATCH 20/43] MN10300: SMP: Differentiate local cache flushing David Howells
2010-10-26 2:54 ` [PATCH 21/43] MN10300: AM34: Add cacheflushing by using the AM34 purge registers David Howells
2010-10-26 2:54 ` [PATCH 22/43] MN10300: Allow some cacheflushes to be avoided if cache snooping is available David Howells
2010-10-26 2:55 ` [PATCH 23/43] MN10300: Cache: Implement SMP global cache flushing David Howells
2010-10-26 2:55 ` [PATCH 24/43] MN10300: Make the boot wrapper able to use writeback caching David Howells
2010-10-26 2:55 ` [PATCH 25/43] MN10300: AM34 erratum requires MMUCTR read and write on exception entry David Howells
2010-10-26 2:55 ` [PATCH 26/43] MN10300: Rename __flush_tlb*() to local_flush_tlb*() David Howells
2010-10-26 2:55 ` [PATCH 27/43] MN10300: Make the use of PIDR to mark TLB entries controllable David Howells
2010-10-26 2:55 ` [PATCH 28/43] MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control David Howells
2010-10-26 2:55 ` [PATCH 29/43] MN10300: SMP TLB flushing David Howells
2010-10-26 2:55 ` [PATCH 30/43] MN10300: Make the FPU operate in non-lazy mode under SMP David Howells
2010-10-26 2:55 ` [PATCH 31/43] MN10300: Implement atomic ops using atomic ops unit David Howells
2010-10-26 2:55 ` [PATCH 32/43] MN10300: Optimise do_csum() David Howells
2010-10-26 2:55 ` [PATCH 33/43] MN10300: Make various interrupt priority settings configurable David Howells
2010-10-26 2:56 ` [PATCH 34/43] MN10300: Delete idle_timestamp from irq_cpustat_t David Howells
2010-10-26 2:56 ` [PATCH 35/43] MN10300: And Panasonic AM34 subarch and implement SMP David Howells
2010-10-27 13:31 ` [Linux-am33-list] " Suzuki Takashi
2010-10-27 14:33 ` David Howells
2010-10-26 2:56 ` [PATCH 36/43] MN10300: ASB2364: Add support for SMSC911X and SMC911X David Howells
2010-10-26 2:56 ` [PATCH 37/43] MN10300: Map userspace atomic op regs as a vmalloc page David Howells
2010-10-26 2:56 ` [PATCH 38/43] MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support David Howells
2010-10-26 2:56 ` [PATCH 39/43] MN10300: Generic time support David Howells
2010-10-26 2:56 ` [PATCH 40/43] MN10300: Update the ASB2303 defconfig David Howells
2010-10-26 2:56 ` [PATCH 41/43] MN10300: Create a defconfig for the ASB2364 board David Howells
2010-10-26 2:56 ` [PATCH 42/43] MN10300: Change "Matsushita" to "Panasonic" David Howells
2010-10-26 2:56 ` [PATCH 43/43] MN10300: Save frame pointer in thread_info struct rather than global var David Howells
2010-10-26 3:07 ` [PATCH 00/43] MN10300: Add SMP support and AM34 CPU core support David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101026025350.23512.40273.stgit@warthog.procyon.org.uk \
--to=dhowells@redhat.com \
--cc=linux-am33-list@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=owada.kiyoshi@jp.panasonic.com \
--cc=takeuchi.akr@jp.panasonic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®