From: David Howells <dhowells@redhat.com>
To: linux-am33-list@redhat.com
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 17/43] MN10300: Reorder asm/cacheflush.h to put primitives first
Date: Tue, 26 Oct 2010 03:54:32 +0100 [thread overview]
Message-ID: <20101026025432.23512.89593.stgit@warthog.procyon.org.uk> (raw)
In-Reply-To: <20101026025301.23512.24525.stgit@warthog.procyon.org.uk>
Reorder asm/cacheflush.h to put arch primitives first, before the main
functions so that the main functions can be inline asm rather than #defines
when non-trivial.
Signed-off-by: David Howells <dhowells@redhat.com>
---
arch/mn10300/include/asm/cacheflush.h | 88 +++++++++++++++++----------------
1 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
index b85be1d..0b5d004 100644
--- a/arch/mn10300/include/asm/cacheflush.h
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -17,49 +17,7 @@
#include <linux/mm.h>
/*
- * virtually-indexed cache management (our cache is physically indexed)
- */
-#define flush_cache_all() do {} while (0)
-#define flush_cache_mm(mm) do {} while (0)
-#define flush_cache_dup_mm(mm) do {} while (0)
-#define flush_cache_range(mm, start, end) do {} while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
-#define flush_cache_vmap(start, end) do {} while (0)
-#define flush_cache_vunmap(start, end) do {} while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page) do {} while (0)
-#define flush_dcache_mmap_lock(mapping) do {} while (0)
-#define flush_dcache_mmap_unlock(mapping) do {} while (0)
-
-/*
- * physically-indexed cache management
- */
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
-
-#else
-
-#define flush_icache_range(start, end) do {} while (0)
-#define flush_icache_page(vma, pg) do {} while (0)
-
-#endif
-
-#define flush_icache_user_range(vma, pg, adr, len) \
- flush_icache_range(adr, adr + len)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- flush_icache_page(vma, page); \
- } while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-/*
- * primitive routines
+ * Primitive routines
*/
#ifdef CONFIG_MN10300_CACHE_ENABLED
extern void mn10300_icache_inv(void);
@@ -106,7 +64,49 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
#endif /* CONFIG_MN10300_CACHE_ENABLED */
/*
- * internal debugging function
+ * Virtually-indexed cache management (our cache is physically indexed)
+ */
+#define flush_cache_all() do {} while (0)
+#define flush_cache_mm(mm) do {} while (0)
+#define flush_cache_dup_mm(mm) do {} while (0)
+#define flush_cache_range(mm, start, end) do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
+#define flush_cache_vmap(start, end) do {} while (0)
+#define flush_cache_vunmap(start, end) do {} while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+#define flush_dcache_page(page) do {} while (0)
+#define flush_dcache_mmap_lock(mapping) do {} while (0)
+#define flush_dcache_mmap_unlock(mapping) do {} while (0)
+
+/*
+ * Physically-indexed cache management
+ */
+#ifdef CONFIG_MN10300_CACHE_ENABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end) do {} while (0)
+#define flush_icache_page(vma, pg) do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+ flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ memcpy(dst, src, len); \
+ flush_icache_page(vma, page); \
+ } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/*
+ * Internal debugging function
*/
#ifdef CONFIG_DEBUG_PAGEALLOC
extern void kernel_map_pages(struct page *page, int numpages, int enable);
next prev parent reply other threads:[~2010-10-26 2:54 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-26 2:53 [PATCH 00/43] MN10300: Add SMP support and AM34 CPU core support David Howells
2010-10-26 2:53 ` [PATCH 01/43] Partially revert patch that encloses asm-offset.h numbers in brackets David Howells
2010-10-26 2:53 ` [PATCH 02/43] MN10300: BUG to BUG_ON changes David Howells
2010-10-26 2:53 ` [PATCH 03/43] bitops: Change the bitmap index from int to unsigned long [mn10300] David Howells
2010-10-26 2:53 ` [PATCH 04/43] mn10300: Use pci_claim_resource David Howells
2010-10-26 2:53 ` [PATCH 05/43] MN10300: Prevent cnt32_to_63() from being preempted in sched_clock() David Howells
2010-10-26 2:53 ` [PATCH 06/43] Typedef SMP call function pointer David Howells
2010-10-26 2:53 ` [PATCH 07/43] MN10300: Don't cast away the volatile in test_bit() David Howells
2010-10-26 2:53 ` [PATCH 08/43] MN10300: Add reads[bwl]() and writes[bwl]() David Howells
2010-10-26 2:53 ` [PATCH 09/43] MN10300: Provide the functions to fully disable maskable interrupts David Howells
2010-10-26 2:53 ` [PATCH 10/43] MN10300: Differentiate AM33_2 and AM33_3 in config David Howells
2010-10-26 2:54 ` [PATCH 11/43] MN10300: Move DMA engine control reg defs to MN103E010 processor directory David Howells
2010-10-26 2:54 ` [PATCH 12/43] MN10300: Don't hard code the cacheline size in register defs David Howells
2010-10-26 2:54 ` [PATCH 13/43] MN10300: Add CPU register bits for AM34 David Howells
2010-10-26 2:54 ` [PATCH 14/43] MN10300: Remove monitor/JTAG functions David Howells
2010-10-26 2:54 ` [PATCH 15/43] MN10300: Cache: Split cache bits out of arch Kconfig David Howells
2010-10-26 2:54 ` [PATCH 16/43] MN10300: Provide a MN10300_CACHE_ENABLED config option David Howells
2010-10-26 2:54 ` David Howells [this message]
2010-10-26 2:54 ` [PATCH 18/43] MN10300: AM34: The current cacheflush routines operate by controlling tag regs David Howells
2010-10-26 2:54 ` [PATCH 19/43] MN10300: Cacheflush functions should take unsigned long addresses David Howells
2010-10-26 2:54 ` [PATCH 20/43] MN10300: SMP: Differentiate local cache flushing David Howells
2010-10-26 2:54 ` [PATCH 21/43] MN10300: AM34: Add cacheflushing by using the AM34 purge registers David Howells
2010-10-26 2:54 ` [PATCH 22/43] MN10300: Allow some cacheflushes to be avoided if cache snooping is available David Howells
2010-10-26 2:55 ` [PATCH 23/43] MN10300: Cache: Implement SMP global cache flushing David Howells
2010-10-26 2:55 ` [PATCH 24/43] MN10300: Make the boot wrapper able to use writeback caching David Howells
2010-10-26 2:55 ` [PATCH 25/43] MN10300: AM34 erratum requires MMUCTR read and write on exception entry David Howells
2010-10-26 2:55 ` [PATCH 26/43] MN10300: Rename __flush_tlb*() to local_flush_tlb*() David Howells
2010-10-26 2:55 ` [PATCH 27/43] MN10300: Make the use of PIDR to mark TLB entries controllable David Howells
2010-10-26 2:55 ` [PATCH 28/43] MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control David Howells
2010-10-26 2:55 ` [PATCH 29/43] MN10300: SMP TLB flushing David Howells
2010-10-26 2:55 ` [PATCH 30/43] MN10300: Make the FPU operate in non-lazy mode under SMP David Howells
2010-10-26 2:55 ` [PATCH 31/43] MN10300: Implement atomic ops using atomic ops unit David Howells
2010-10-26 2:55 ` [PATCH 32/43] MN10300: Optimise do_csum() David Howells
2010-10-26 2:55 ` [PATCH 33/43] MN10300: Make various interrupt priority settings configurable David Howells
2010-10-26 2:56 ` [PATCH 34/43] MN10300: Delete idle_timestamp from irq_cpustat_t David Howells
2010-10-26 2:56 ` [PATCH 35/43] MN10300: And Panasonic AM34 subarch and implement SMP David Howells
2010-10-27 13:31 ` [Linux-am33-list] " Suzuki Takashi
2010-10-27 14:33 ` David Howells
2010-10-26 2:56 ` [PATCH 36/43] MN10300: ASB2364: Add support for SMSC911X and SMC911X David Howells
2010-10-26 2:56 ` [PATCH 37/43] MN10300: Map userspace atomic op regs as a vmalloc page David Howells
2010-10-26 2:56 ` [PATCH 38/43] MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support David Howells
2010-10-26 2:56 ` [PATCH 39/43] MN10300: Generic time support David Howells
2010-10-26 2:56 ` [PATCH 40/43] MN10300: Update the ASB2303 defconfig David Howells
2010-10-26 2:56 ` [PATCH 41/43] MN10300: Create a defconfig for the ASB2364 board David Howells
2010-10-26 2:56 ` [PATCH 42/43] MN10300: Change "Matsushita" to "Panasonic" David Howells
2010-10-26 2:56 ` [PATCH 43/43] MN10300: Save frame pointer in thread_info struct rather than global var David Howells
2010-10-26 3:07 ` [PATCH 00/43] MN10300: Add SMP support and AM34 CPU core support David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101026025432.23512.89593.stgit@warthog.procyon.org.uk \
--to=dhowells@redhat.com \
--cc=linux-am33-list@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®