From: Niklas Cassel <niklas.cassel@axis.com>
To: Jingoo Han <jingoohan1@gmail.com>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Niklas Cassel <niklass@axis.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 03/10] PCI: designware-ep: read-only registers need DBI_RO_WR_EN to be writable
Date: Fri, 13 Oct 2017 18:09:06 +0200 [thread overview]
Message-ID: <20171013160914.3220-4-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171013160914.3220-1-niklas.cassel@axis.com>
Certain registers that pcie-designware-ep tries to write are read-only
registers. However, these registers can become read/write if we first
enable the DBI_RO_WR_EN bit.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/pci/dwc/pcie-designware-ep.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index c92ab87fd660..3fb34be99715 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -35,8 +35,10 @@ static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
u32 reg;
reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+ dw_pcie_dbi_ro_wr_en(pci);
dw_pcie_writel_dbi2(pci, reg, 0x0);
dw_pcie_writel_dbi(pci, reg, 0x0);
+ dw_pcie_dbi_ro_wr_dis(pci);
}
static int dw_pcie_ep_write_header(struct pci_epc *epc,
@@ -45,6 +47,7 @@ static int dw_pcie_ep_write_header(struct pci_epc *epc,
struct dw_pcie_ep *ep = epc_get_drvdata(epc);
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ dw_pcie_dbi_ro_wr_en(pci);
dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
@@ -58,6 +61,7 @@ static int dw_pcie_ep_write_header(struct pci_epc *epc,
dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
hdr->interrupt_pin);
+ dw_pcie_dbi_ro_wr_dis(pci);
return 0;
}
@@ -142,8 +146,10 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
if (ret)
return ret;
+ dw_pcie_dbi_ro_wr_en(pci);
dw_pcie_writel_dbi2(pci, reg, size - 1);
dw_pcie_writel_dbi(pci, reg, flags);
+ dw_pcie_dbi_ro_wr_dis(pci);
return 0;
}
@@ -223,7 +229,9 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int)
val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
val &= ~MSI_CAP_MMC_MASK;
val |= (encode_int << MSI_CAP_MMC_SHIFT) & MSI_CAP_MMC_MASK;
+ dw_pcie_dbi_ro_wr_en(pci);
dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+ dw_pcie_dbi_ro_wr_dis(pci);
return 0;
}
--
2.11.0
next prev parent reply other threads:[~2017-10-13 16:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-13 16:09 [PATCH 00/10] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-10-13 16:09 ` [PATCH 01/10] PCI: dwc: use DMA-API for allocating MSI data Niklas Cassel
2017-10-13 16:42 ` David Laight
2017-10-16 11:43 ` Niklas Cassel
2017-10-13 16:43 ` Jingoo Han
2017-10-16 12:08 ` Niklas Cassel
2017-10-13 16:47 ` Jingoo Han
2017-10-16 12:11 ` Niklas Cassel
2017-10-16 22:16 ` Bjorn Helgaas
2017-10-13 16:09 ` [PATCH 02/10] PCI: designware-ep: set_msi should only set MMC bits Niklas Cassel
2017-10-16 22:26 ` Bjorn Helgaas
2017-10-13 16:09 ` Niklas Cassel [this message]
2017-10-13 16:09 ` [PATCH 04/10] PCI: designware-ep: pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-10-13 16:09 ` [PATCH 05/10] PCI: artpec6: remove unused defines Niklas Cassel
2017-10-13 16:09 ` [PATCH 06/10] PCI: dwc: artpec6: use BIT and GENMASK macros Niklas Cassel
2017-10-13 16:09 ` [PATCH 07/10] PCI: dwc: artpec6: split artpec6_pcie_establish_link to smaller functions Niklas Cassel
2017-10-13 16:09 ` [PATCH 08/10] PCI: dwc: artpec6: add support for endpoint mode Niklas Cassel
2017-10-16 23:43 ` Bjorn Helgaas
2017-10-18 8:03 ` Kishon Vijay Abraham I
2017-10-18 8:15 ` Niklas Cassel
2017-10-18 8:47 ` Kishon Vijay Abraham I
2017-10-19 7:59 ` Christoph Hellwig
2017-10-19 10:57 ` Niklas Cassel
2017-10-19 11:40 ` Niklas Cassel
2017-10-17 22:24 ` Rob Herring
2017-10-18 8:46 ` Kishon Vijay Abraham I
2017-10-20 10:48 ` Niklas Cassel
2017-10-13 16:09 ` [PATCH 09/10] PCI: dwc: make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-10-16 12:40 ` Niklas Cassel
2017-10-13 16:09 ` [PATCH 10/10] PCI: dwc: artpec6: add support for the ARTPEC-7 SoC Niklas Cassel
2017-10-17 22:25 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171013160914.3220-4-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=Joao.Pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=niklass@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®