From: John Madieu <john.madieu.xa@bp.renesas.com>
To: john.madieu.xa@bp.renesas.com, conor+dt@kernel.org,
daniel.lezcano@linaro.org, geert+renesas@glider.be,
krzk+dt@kernel.org, rafael@kernel.org
Cc: biju.das.jz@bp.renesas.com, devicetree@vger.kernel.org,
john.madieu@gmail.com, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
lukasz.luba@arm.com, magnus.damm@gmail.com, robh@kernel.org,
rui.zhang@intel.com, sboyd@kernel.org,
niklas.soderlund+renesas@ragnatech.se
Subject: [PATCH v6 0/5] thermal: renesas: Add support for RZ/G3E
Date: Thu, 22 May 2025 20:22:43 +0200 [thread overview]
Message-ID: <20250522182252.1593159-1-john.madieu.xa@bp.renesas.com> (raw)
This series adds support for the temperature sensor unit (TSU) found on the
Renesas RZ/G3E SoC.
The series consists of 5 patches (one of which is not related to the thermal
framework) that progressively add TSU support as follows:
- patch 1/5: adds syscon/regmap support for accessing system controller
registers, enabling access to TSU calibration values
- patch 2-5/5: adds dt-bindings, actual driver, DT node, and config symbol.
Patch 1/5 has been duplicated at [1] in USB series. Since it was not reviewed
nor merged yet, I use it here to ease the review, so that which ever is
reviewed first get merged.
Changes:
v1 -> v2
* Fix yaml warnings from dt-binding
* Update IRQ names to reflect TSU expectations
v2 -> v3
* Remove useless 'renesas,tsu-operating-mode' property
v3 -> v4
* Improve commit messages
v4 -> v5
* Remove useless curly braces on single line-protected scoped guards
v5 -> v6
* Minor typo fix
* Constify regmap config in patch 1/5
Regards,
[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20250521140943.3830195-2-claudiu.beznea.uj@bp.renesas.com/
John Madieu (5):
soc: renesas: rz-sysc: Add syscon/regmap support
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
arm64: dts: renesas: r9a09g047: Add TSU node
arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
.../thermal/renesas,r9a09g047-tsu.yaml | 81 ++++
MAINTAINERS | 7 +
arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 48 ++
arch/arm64/configs/defconfig | 1 +
drivers/soc/renesas/Kconfig | 1 +
drivers/soc/renesas/r9a08g045-sysc.c | 10 +
drivers/soc/renesas/r9a09g047-sys.c | 10 +
drivers/soc/renesas/r9a09g057-sys.c | 10 +
drivers/soc/renesas/rz-sysc.c | 17 +-
drivers/soc/renesas/rz-sysc.h | 3 +
drivers/thermal/renesas/Kconfig | 7 +
drivers/thermal/renesas/Makefile | 1 +
drivers/thermal/renesas/rzg3e_thermal.c | 443 ++++++++++++++++++
13 files changed, 638 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
create mode 100644 drivers/thermal/renesas/rzg3e_thermal.c
--
2.25.1
next reply other threads:[~2025-05-22 18:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-22 18:22 John Madieu [this message]
2025-05-22 18:22 ` [PATCH v6 1/5] soc: renesas: rz-sysc: Add syscon/regmap support John Madieu
2025-08-04 9:19 ` Geert Uytterhoeven
2025-08-05 12:38 ` John Madieu
2025-05-22 18:22 ` [PATCH v6 2/5] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit John Madieu
2025-05-22 18:22 ` [PATCH v6 3/5] thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC John Madieu
2025-06-06 6:17 ` Biju Das
2025-06-11 10:54 ` John Madieu
2025-07-16 21:11 ` Daniel Lezcano
2025-07-31 17:19 ` John Madieu
2025-08-04 16:08 ` Daniel Lezcano
2025-08-05 7:49 ` John Madieu
2025-08-05 10:05 ` Daniel Lezcano
2025-08-13 17:44 ` John Madieu
2025-08-04 9:28 ` Geert Uytterhoeven
2025-08-05 8:27 ` John Madieu
2025-08-05 8:47 ` Geert Uytterhoeven
2025-08-05 9:22 ` John Madieu
2025-08-05 9:35 ` Geert Uytterhoeven
2025-08-05 9:52 ` John Madieu
2025-05-22 18:22 ` [PATCH v6 4/5] arm64: dts: renesas: r9a09g047: Add TSU node John Madieu
2025-05-22 18:22 ` [PATCH v6 5/5] arm64: defconfig: Enable the Renesas RZ/G3E thermal driver John Madieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250522182252.1593159-1-john.madieu.xa@bp.renesas.com \
--to=john.madieu.xa@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=john.madieu@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=magnus.damm@gmail.com \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®