[PATCH v6 4/5] arm64: dts: renesas: r9a09g047: Add TSU node

[John Madieu <john.madieu.xa@bp.renesas.com>]

Add TSU node along with thermal zones and keep it enabled in the SoC DTSI.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
---

Changes:

v1 -> v2: Fix IRQ names
v2 -> v3: remove useless 'renesas,tsu-operating-mode' property'
v3 -> v4: no changes
v5: no changes
v6: no changes

 arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
index 876f70fed433..535da0292d91 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
@@ -64,6 +64,7 @@ cpu0: cpu@0 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK0>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -74,6 +75,7 @@ cpu1: cpu@100 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK1>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -84,6 +86,7 @@ cpu2: cpu@200 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK2>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -94,6 +97,7 @@ cpu3: cpu@300 {
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK3>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -391,6 +395,19 @@ wdt3: watchdog@13000400 {
 			status = "disabled";
 		};
 
+		tsu: thermal@14002000 {
+			compatible = "renesas,r9a09g047-tsu";
+			reg = <0 0x14002000 0 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "adi", "adcmpi";
+			clocks = <&cpg CPG_MOD 0x10a>;
+			resets = <&cpg 0xf8>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <0>;
+			renesas,tsu-calibration-sys = <&sys>;
+		};
+
 		i2c0: i2c@14400400 {
 			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
 			reg = <0 0x14400400 0 0x400>;
@@ -671,6 +688,37 @@ sdhi2_vqmmc: vqmmc-regulator {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsu>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 3>, <&cpu1 0 3>,
+							 <&cpu2 0 3>, <&cpu3 0 3>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				target: trip-point {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor_crit: sensor-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-- 
2.25.1