[PATCH v3 11/14] phy: rockchip: samsung-hdptx: Drop hw_rate driver data

[Cristian Ciocaltea <cristian.ciocaltea@collabora.com>]

The ->hw_rate member of struct rk_hdptx_phy was mainly used to keep
track of the clock rate programmed in hardware and support implementing
the ->recalc_rate() callback in hdptx_phy_clk_ops.

Computing the clock rate from the actual PHY PLL configuration seems to
work reliably, hence remove the now redundant struct member.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 6e2443f78968948b84e4261e33761fe0d189553b..4195387108d8786c2b7cabb6d2f3c07315fefd88 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -401,7 +401,6 @@ struct rk_hdptx_phy {
 
 	/* clk provider */
 	struct clk_hw hw;
-	unsigned long hw_rate;
 	bool restrict_rate_change;
 
 	atomic_t usage_count;
@@ -964,7 +963,7 @@ static int rk_hdptx_tmds_ropll_cmn_config(struct rk_hdptx_phy *hdptx)
 {
 	const struct ropll_config *cfg = NULL;
 	struct ropll_config rc = {0};
-	int ret, i;
+	int i;
 
 	if (!hdptx->hdmi_cfg.tmds_char_rate)
 		return 0;
@@ -1026,12 +1025,7 @@ static int rk_hdptx_tmds_ropll_cmn_config(struct rk_hdptx_phy *hdptx)
 	regmap_update_bits(hdptx->regmap, CMN_REG(0086), PLL_PCG_CLK_EN_MASK,
 			   FIELD_PREP(PLL_PCG_CLK_EN_MASK, 0x1));
 
-	ret = rk_hdptx_post_enable_pll(hdptx);
-	if (!ret)
-		hdptx->hw_rate = DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.tmds_char_rate * 8,
-						       hdptx->hdmi_cfg.bpc);
-
-	return ret;
+	return rk_hdptx_post_enable_pll(hdptx);
 }
 
 static int rk_hdptx_tmds_ropll_mode_config(struct rk_hdptx_phy *hdptx)
@@ -1936,9 +1930,6 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
 	u64 rate;
 	int ret;
 
-	if (hdptx->hw_rate)
-		return hdptx->hw_rate;
-
 	ret = regmap_read(hdptx->grf, GRF_HDPTX_CON0, &status);
 	if (ret || !(status & HDPTX_I_PLL_EN))
 		return 0;

-- 
2.50.1