From: Claudiu Beznea <claudiu.beznea@kernel.org>
To: wsa+renesas@sang-engineering.com,
tommaso.merciai.xr@bp.renesas.com, alexandre.belloni@bootlin.com,
Frank.Li@nxp.com, p.zabel@pengutronix.de
Cc: claudiu.beznea@kernel.org, claudiu.beznea@tuxon.dev,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
stable@vger.kernel.org
Subject: [PATCH 07/17] i3c: renesas: Perform Dynamic Address Assignment on resume
Date: Fri, 22 May 2026 13:18:05 +0300 [thread overview]
Message-ID: <20260522101815.1722909-8-claudiu.beznea@kernel.org> (raw)
In-Reply-To: <20260522101815.1722909-1-claudiu.beznea@kernel.org>
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
The Renesas RZ/G3S SoC supports a power saving mode where power to most
SoC components, including I3C, is turned off.
On systems where the I3C devices also loses power during suspend (e.g. NXP
P3T1085UK-ARD connected to the PMOD1_6A connector of the RZ SMARC Carrier
2 + Renesas RZ/G3S SMARC SOM), the devices becomes unreachable after
resume.
Running DAA in the controller resume path restores communication. However,
DAA relies on interrupts for TX/RX, which are not available in the noirq
suspend/resume phase (unless they are wakeup interrupts). For this, the
suspend/resume callbacks were moved out of the noirq phase. Currently,
there is no identified use case on either the Renesas RZ/G3S or Renesas
RZ/G3E SoCs that requires the controller suspend/resume hooks to be part of
the noirq suspend/resume phase.
Along with this, struct renesas_i3c::DATBASn and its usage were removed,
as they are no longer needed.
Fixes: e7218986319b ("i3c: renesas: Add suspend/resume support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
drivers/i3c/master/renesas-i3c.c | 34 ++++++++++++--------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/i3c/master/renesas-i3c.c b/drivers/i3c/master/renesas-i3c.c
index 2f3c6ddf75c0..c009d0de6a2b 100644
--- a/drivers/i3c/master/renesas-i3c.c
+++ b/drivers/i3c/master/renesas-i3c.c
@@ -265,7 +265,6 @@ struct renesas_i3c {
u8 addrs[RENESAS_I3C_MAX_DEVS];
struct renesas_i3c_xferqueue xferqueue;
void __iomem *regs;
- u32 *DATBASn;
struct clk_bulk_data *clks;
struct reset_control *presetn;
struct reset_control *tresetn;
@@ -1400,12 +1399,6 @@ static int renesas_i3c_probe(struct platform_device *pdev)
i3c->maxdevs = RENESAS_I3C_MAX_DEVS;
i3c->free_pos = GENMASK(i3c->maxdevs - 1, 0);
- /* Allocate dynamic Device Address Table backup. */
- i3c->DATBASn = devm_kzalloc(&pdev->dev, sizeof(u32) * i3c->maxdevs,
- GFP_KERNEL);
- if (!i3c->DATBASn)
- return -ENOMEM;
-
return i3c_master_register(&i3c->base, &pdev->dev, &renesas_i3c_ops, false);
}
@@ -1416,17 +1409,13 @@ static void renesas_i3c_remove(struct platform_device *pdev)
i3c_master_unregister(&i3c->base);
}
-static int renesas_i3c_suspend_noirq(struct device *dev)
+static int renesas_i3c_suspend(struct device *dev)
{
struct renesas_i3c *i3c = dev_get_drvdata(dev);
- int i, ret;
+ int ret;
i2c_mark_adapter_suspended(&i3c->base.i2c);
- /* Store Device Address Table values. */
- for (i = 0; i < i3c->maxdevs; i++)
- i3c->DATBASn[i] = renesas_readl(i3c->regs, DATBAS(i));
-
ret = reset_control_assert(i3c->presetn);
if (ret)
goto err_mark_resumed;
@@ -1447,10 +1436,10 @@ static int renesas_i3c_suspend_noirq(struct device *dev)
return ret;
}
-static int renesas_i3c_resume_noirq(struct device *dev)
+static int renesas_i3c_resume(struct device *dev)
{
struct renesas_i3c *i3c = dev_get_drvdata(dev);
- int i, ret;
+ int ret;
ret = reset_control_deassert(i3c->tresetn);
if (ret)
@@ -1476,15 +1465,19 @@ static int renesas_i3c_resume_noirq(struct device *dev)
renesas_writel(i3c->regs, MSDVAD, MSDVAD_MDYADV |
MSDVAD_MDYAD(i3c->dyn_addr));
- /* Restore Device Address Table values. */
- for (i = 0; i < i3c->maxdevs; i++)
- renesas_writel(i3c->regs, DATBAS(i), i3c->DATBASn[i]);
-
/* I3C hw init. */
renesas_i3c_hw_init(i3c);
i2c_mark_adapter_resumed(&i3c->base.i2c);
+ ret = i3c_master_do_daa_ext(&i3c->base, true);
+ if (ret)
+ dev_err(dev, "DAA failed on resume, ret=%d", ret);
+
+ /*
+ * I3C devices may have retained their dynamic address anyway. Do not
+ * fail the resume because of DAA error.
+ */
return 0;
err_clks_disable:
@@ -1497,8 +1490,7 @@ static int renesas_i3c_resume_noirq(struct device *dev)
}
static const struct dev_pm_ops renesas_i3c_pm_ops = {
- NOIRQ_SYSTEM_SLEEP_PM_OPS(renesas_i3c_suspend_noirq,
- renesas_i3c_resume_noirq)
+ SYSTEM_SLEEP_PM_OPS(renesas_i3c_suspend, renesas_i3c_resume)
};
static const struct of_device_id renesas_i3c_of_ids[] = {
--
2.43.0
next prev parent reply other threads:[~2026-05-22 10:18 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-22 10:17 [PATCH 00/17] i3c: renesas: Suspend to RAM with power loss and runtime PM Claudiu Beznea
2026-05-22 10:17 ` [PATCH 01/17] i3c: renesas: Check that the transfer is valid before accessing it Claudiu Beznea
2026-05-22 19:02 ` Frank Li
2026-05-22 10:18 ` [PATCH 02/17] i3c: renesas: Use the divider 128 Claudiu Beznea
2026-05-22 19:06 ` Frank Li
2026-05-23 8:14 ` Claudiu Beznea
2026-05-22 10:18 ` [PATCH 03/17] i3c: renesas: Restore STDBR and EXTBR registers on resume Claudiu Beznea
2026-05-22 19:10 ` Frank Li
2026-05-28 8:29 ` Claudiu Beznea
2026-05-28 19:13 ` Frank Li
2026-05-22 10:18 ` [PATCH 04/17] i3c: renesas: Follow the reset deassert order used in probe Claudiu Beznea
2026-05-22 19:11 ` Frank Li
2026-05-22 10:18 ` [PATCH 05/17] i3c: renesas: Fix re-attach Claudiu Beznea
2026-05-22 19:13 ` Frank Li
2026-05-22 10:18 ` [PATCH 06/17] i3c: renesas: Reset the controller on resume Claudiu Beznea
2026-05-22 19:15 ` Frank Li
2026-05-23 10:24 ` Claudiu Beznea
2026-05-22 10:18 ` Claudiu Beznea [this message]
2026-05-22 19:16 ` [PATCH 07/17] i3c: renesas: Perform Dynamic Address Assignment " Frank Li
2026-05-23 10:26 ` Claudiu Beznea
2026-05-22 10:18 ` [PATCH 08/17] i3c: renesas: Clean DATBAS register on detach Claudiu Beznea
2026-05-22 19:17 ` Frank Li
2026-05-22 10:18 ` [PATCH 09/17] i3c: renesas: Use reset_control_bulk_{assert, deassert}() Claudiu Beznea
2026-05-22 19:19 ` Frank Li
2026-05-23 10:26 ` Claudiu Beznea
2026-05-22 10:18 ` [PATCH 10/17] i3c: renesas: Return immediately if there is nothing to transfer Claudiu Beznea
2026-05-22 19:20 ` Frank Li
2026-05-22 10:18 ` [PATCH 11/17] i3c: renesas: Follow a unified pattern for transfer and command initialization Claudiu Beznea
2026-05-22 19:21 ` Frank Li
2026-05-22 10:18 ` [PATCH 12/17] i3c: renesas: Drop the explicit memset() call Claudiu Beznea
2026-05-22 19:43 ` Frank Li
2026-05-22 10:18 ` [PATCH 13/17] i3c: renesas: Update HW registers after SW computations are done Claudiu Beznea
2026-05-22 19:48 ` Frank Li
2026-05-22 10:18 ` [PATCH 14/17] i3c: renesas: Organize structures to avoid unnecessary padding Claudiu Beznea
2026-05-22 19:50 ` Frank Li
2026-05-22 10:18 ` [PATCH 15/17] i3c: renesas: Use the "dev_name:irq_name" format for the interrupt name Claudiu Beznea
2026-05-22 19:51 ` Frank Li
2026-05-22 10:18 ` [PATCH 16/17] i3c: renesas: Drop unnecessary tab Claudiu Beznea
2026-05-22 19:52 ` Frank Li
2026-05-22 10:18 ` [PATCH 17/17] i3c: renesas: Add runtime PM support Claudiu Beznea
2026-05-22 20:01 ` Frank Li
2026-05-23 10:23 ` Claudiu Beznea
2026-06-02 11:49 ` Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260522101815.1722909-8-claudiu.beznea@kernel.org \
--to=claudiu.beznea@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=tommaso.merciai.xr@bp.renesas.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®