[PATCH v1 3/8] arm64: dts: qcom: shikra: Add gpr node

[Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>]

Add GPR(Generic Pack router) node along with
APM(Audio Process Manager) and PRM(Proxy resource
Manager) audio services.

Co-developed-by: Pratyush Meduri <mpratyus@qti.qualcomm.com>
Signed-off-by: Pratyush Meduri <mpratyus@qti.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 39 ++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index e58c87fc8cb0..3df09cfd17a4 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/clock/qcom,shikra-audiocorecc.h>
 #include <dt-bindings/clock/qcom,shikra-gcc.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -15,6 +16,8 @@
 #include <dt-bindings/interconnect/qcom,shikra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -1851,6 +1854,42 @@ glink-edge {
 				mboxes = <&apcs_glb 12>;
 				qcom,remote-pid = <1>;
 				label = "mpss";
+
+				gpr: gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "modem_apps";
+					qcom,domain = <GPR_DOMAIN_ID_MODEM>;
+					qcom,intents = <200 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							qcom,vmid = <QCOM_SCM_VMID_LPASS
+								     QCOM_SCM_VMID_MSS_MSA>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 
-- 
2.34.1