mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Harendra Gautam <harendra.gautam@oss.qualcomm.com>
Subject: [PATCH v1 2/8] arm64: dts: qcom: shikra: Add QAIF CPU node for audio
Date: Wed, 17 Jun 2026 01:43:09 +0530	[thread overview]
Message-ID: <20260616201315.2565115-3-mohammad.rafi.shaik@oss.qualcomm.com> (raw)
In-Reply-To: <20260616201315.2565115-1-mohammad.rafi.shaik@oss.qualcomm.com>

Add the QAIF CPU endpoint in shikra.dtsi so board files can connect LPASS
front-end links to backend codecs.

Describe the MMIO region, interrupt, IOMMU mapping and required clocks for
the QAIF block. Keep the node disabled at SoC level; board dts files enable
and consume it in subsequent patches.

Co-developed-by: Harendra Gautam <harendra.gautam@oss.qualcomm.com>
Signed-off-by: Harendra Gautam <harendra.gautam@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 46 ++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index bc4ad2bcbbec..e58c87fc8cb0 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -2017,6 +2017,52 @@ dispcc: clock-controller@5f00000 {
 			#power-domain-cells = <1>;
 		};
 
+		qaif_cpu: audio@a000000 {
+			compatible = "qcom,shikra-qaif-cpu";
+			reg = <0x0 0x0a000000 0x0 0x20000>;
+
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			clocks = <&gcc GCC_LPASS_CONFIG_CLK>,
+				<&gcc GCC_LPASS_CORE_AXIM_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AUD_DMA_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AUD_DMA_MEM_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_BUS_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF0_EBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF0_IBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF1_EBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF1_IBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF2_EBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF2_IBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF3_EBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_AIF_IF3_IBIT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_EXT_MCLKA_OUT_CLK>,
+				<&audiocorecc AUDIO_CORE_CC_EXT_MCLKB_OUT_CLK>;
+			clock-names = "lpass_config_clk",
+				"lpass_core_axim_clk",
+				"aud_dma_clk",
+				"aud_dma_mem_clk",
+				"bus_clk",
+				"aif_if0_ebit_clk",
+				"aif_if0_ibit_clk",
+				"aif_if1_ebit_clk",
+				"aif_if1_ibit_clk",
+				"aif_if2_ebit_clk",
+				"aif_if2_ibit_clk",
+				"aif_if3_ebit_clk",
+				"aif_if3_ibit_clk",
+				"ext_mclka_clk",
+				"ext_mclkb_clk";
+
+			iommus = <&apps_smmu 0x1c0 0x0>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		audiocorecc: clock-controller@a0a0000 {
 			compatible = "qcom,shikra-cqm-audiocorecc";
 			reg = <0x0 0x0a0a0000 0x0 0x10000>,
-- 
2.34.1


  parent reply	other threads:[~2026-06-16 20:14 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16 20:13 [PATCH v1 0/8] arm64: dts: qcom: shikra: Enable audio on EVK boards Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 1/8] ASoC: dt-bindings: qcom,apr: Add modem_apps GLINK channel for shikra Mohammad Rafi Shaik
2026-06-22 13:20   ` Krzysztof Kozlowski
2026-06-16 20:13 ` Mohammad Rafi Shaik [this message]
2026-06-24  8:20   ` [PATCH v1 2/8] arm64: dts: qcom: shikra: Add QAIF CPU node for audio Konrad Dybcio
2026-06-29  5:05     ` Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 3/8] arm64: dts: qcom: shikra: Add gpr node Mohammad Rafi Shaik
2026-06-22 13:44   ` Krzysztof Kozlowski
2026-06-29  5:23     ` Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 4/8] arm64: dts: qcom: shikra: Add soundwire and macro nodes Mohammad Rafi Shaik
2026-06-25 11:45   ` Konrad Dybcio
2026-06-29  5:25     ` Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 5/8] arm64: dts: qcom: shikra-cqm-evk: Enable sound card support Mohammad Rafi Shaik
2026-06-22 13:46   ` Krzysztof Kozlowski
2026-06-29  5:28     ` Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 6/8] arm64: dts: qcom: shikra-cqs-evk: " Mohammad Rafi Shaik
2026-06-22 13:47   ` Krzysztof Kozlowski
2026-06-29  5:30     ` Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 7/8] arm64: dts: qcom: shikra-iqs-evk: " Mohammad Rafi Shaik
2026-06-16 20:13 ` [PATCH v1 8/8] arm64: defconfig: Enable Qualcomm QAIF and WSA885X-I2C drivers Mohammad Rafi Shaik
2026-06-22 13:18   ` Krzysztof Kozlowski
2026-06-22 13:19     ` Krzysztof Kozlowski
2026-06-29  5:35       ` Mohammad Rafi Shaik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260616201315.2565115-3-mohammad.rafi.shaik@oss.qualcomm.com \
    --to=mohammad.rafi.shaik@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=harendra.gautam@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=srini@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®