[PATCH v1 7/8] arm64: dts: qcom: shikra-iqs-evk: Enable sound card support

[Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>]

Enable the IQS EVK audio card using MAX98091 on I2S0 for primary
playback/capture and VA DMIC capture through q6apm backend links.

Add board clock and pinctrl states required for codec IRQ, external
mclk and digital mic routing.

Co-developed-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 143 ++++++++++++++++++++
 1 file changed, 143 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index fd691d53a0fa..62f405578172 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -23,6 +23,75 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	sound {
+		compatible = "qcom,shikra-iqs-sndcard";
+		model = "shikra-iqs-evk";
+
+		pinctrl-0 = <&i2s0_default>, <&ext_mclk2_active>;
+		pinctrl-names = "default";
+
+		audio-routing = "IN34", "Headset Mic",
+				"Headset Mic", "MICBIAS",
+				"DMICL", "Int Mic",
+				"Int Mic", "MICBIAS",
+				"Headphone", "HPL",
+				"Headphone", "HPR",
+				"Speaker", "SPKL",
+				"Speaker", "SPKR",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb";
+
+		pri-i2s-playback-dai-link {
+			link-name = "Analog Playback";
+
+			codec {
+				sound-dai = <&max98091>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		pri-i2s-capture-dai-link {
+			link-name = "Analog Capture";
+
+			codec {
+				sound-dai = <&max98091>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dmic-dai-link {
+			link-name = "VA DMIC Capture";
+
+			codec {
+				sound-dai = <&vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vreg_wcn_3p3: regulator-wcn-3p3 {
 		compatible = "regulator-fixed";
 		regulator-name = "wcn_3p3";
@@ -68,6 +137,36 @@ vreg_pmu_ch1: ldo4 {
 	};
 };
 
+&i2c3 {
+	status = "okay";
+
+	max98091: audio-codec@10 {
+		compatible = "maxim,max98091";
+		reg = <0x10>;
+
+		pinctrl-0 = <&max98091_default>;
+		pinctrl-names = "default";
+
+		interrupts-extended = <&tlmm 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		clock-names = "mclk";
+		assigned-clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&q6apmbedai {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		clocks = <&q6prmcc LPASS_CLK_ID_AUD_INTF0_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		clock-names = "bclk";
+	};
+};
+
 &remoteproc_cdsp {
 	firmware-name = "qcom/shikra/cdsp.mbn";
 
@@ -103,6 +202,36 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&tlmm {
+	dmic_eldo_en_default: dmic-eldo-default-active-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	ext_mclk2_active: ext-mclk2-state {
+		pins = "gpio110";
+		function = "ext_mclk";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	i2s0_default: i2s0-default-active-state {
+		pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109";
+		function = "i2s0";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	max98091_default: max98091-default-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
 &uart8 {
 	status = "okay";
 
@@ -114,6 +243,20 @@ bluetooth {
 	};
 };
 
+&vamacro {
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "mclk",
+		      "npl";
+
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>, <&dmic_eldo_en_default>;
+	pinctrl-names = "default";
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&pm8150_s4>;
 	vdd-1.8-xo-supply = <&vreg_pmu_xo>;
-- 
2.34.1