[PATCH 2/7] ARM: dts: axis: artpec6: align all continued lines

[Henrik Grimler <henrik.grimler@axis.com>]

dt-check-style in strict mode reports that there are a bunch of
multiline properties that are not aligned, fix them to make the dts
easier to follow. Fixes dt-check-style warnings like:

  axis/artpec6.dtsi:290: [continuation-alignment] continuation should align to column 34 (to < or ")

Signed-off-by: Henrik Grimler <henrik.grimler@axis.com>
---
 arch/arm/boot/dts/axis/artpec6.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index ce642dcc754e..d6610f62ca25 100644
--- a/arch/arm/boot/dts/axis/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
@@ -151,7 +151,7 @@ pl310: cache-controller@faf10000 {
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -287,7 +287,7 @@ dma1: dma@f8019400 {
 		ethernet: ethernet@f8010000 {
 			clock-names = "stmmaceth", "ptp_ref";
 			clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
-				<&clkctrl ARTPEC6_CLK_PTP_REF>;
+				 <&clkctrl ARTPEC6_CLK_PTP_REF>;
 			compatible = "snps,dwmac-4.10a", "snps,dwmac";
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
@@ -333,7 +333,7 @@ uart0: serial@f8036000 {
 			reg = <0xf8036000 0x1000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+				 <&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
@@ -347,7 +347,7 @@ uart1: serial@f8037000 {
 			reg = <0xf8037000 0x1000>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+				 <&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
@@ -361,7 +361,7 @@ uart2: serial@f8038000 {
 			reg = <0xf8038000 0x1000>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+				 <&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
@@ -375,7 +375,7 @@ uart3: serial@f8039000 {
 			reg = <0xf8039000 0x1000>;
 			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+				 <&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;

-- 
2.43.0