[PATCH 7/7] ARM: dts: axis: artpec6: add empty lines before empty queue nodes

[Henrik Grimler <henrik.grimler@axis.com>]

For better readability child nodes should be preceded by an empty
line, and closing braces should be on their own line. Both issues are
reported by dt-check-style in strict mode, e.g.

  axis/artpec6.dtsi:212: [required-blank-lines] child node must be preceded by a blank line
  axis/artpec6.dtsi:321: [node-close-alone] closing brace must be on its own line

Updated the dts to use preferred style.

Signed-off-by: Henrik Grimler <henrik.grimler@axis.com>
---
 arch/arm/boot/dts/axis/artpec6.dtsi | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index c9f671fd685a..6044a378c5b0 100644
--- a/arch/arm/boot/dts/axis/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
@@ -323,13 +323,19 @@ stmmac_axi_setup: stmmac-axi-config {
 
 			mtl_rx_setup: rx-queues-config {
 				snps,rx-queues-to-use = <1>;
-				queue0 {};
+
+				queue0 {
+				};
 			};
 
 			mtl_tx_setup: tx-queues-config {
 				snps,tx-queues-to-use = <2>;
-				queue0 {};
-				queue1 {};
+
+				queue0 {
+				};
+
+				queue1 {
+				};
 			};
 		};
 

-- 
2.43.0