From: Navid Ghahremani <ghahramani.navid@gmail.com>
To: Bartosz Golaszewski <brgl@kernel.org>
Cc: arnd@arndb.de, stefandoesinger@gmail.com, krzk@kernel.org,
Linus Walleij <linusw@kernel.org>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver
Date: Fri, 13 Nov 2026 00:38:24 +0000 [thread overview]
Message-ID: <20261113003824.3670843-1-ghahramani.navid@gmail.com> (raw)
In-Reply-To: <CAMRc=MfhnbwvM+c=e1=ga4wALCmj8Bi8LWkB_W4_0YHkK3Hikw@mail.gmail.com>
Hi Bartosz,
Bartosz Golaszewski wrote:
> > + struct gpio_generic_chip_config config = { };
>
> Don't initialize it here, instead...
[...]
> ... do:
>
> config = (struct gpio_generic_chip){
> .dev = dev,
> ...
> };
Done in my tree, the config is now set with a compound literal like
that. The GPIO driver will come back as its own series after the base
support for this SoC.
> Looks pretty good, I love small drivers like this.
Thanks, that is nice to hear.
Best regards,
Navid
next prev parent reply other threads:[~2026-11-13 0:38 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20261014072109.1759502-1-ghahramani.navid@gmail.com>
2026-10-14 7:20 ` [PATCH v2 01/24] MAINTAINERS: Consolidate ARM/ZTE ZX SOC SUPPORT with Stefan Doesinger Navid Ghahremani
2026-10-14 20:11 ` Stefan Dösinger
2026-11-13 0:35 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 02/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions Navid Ghahremani
2026-10-27 21:30 ` Rob Herring (Arm)
2026-10-14 7:20 ` [PATCH v2 03/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 04/24] dt-bindings: clock: Add ZTE ZX279128S CRM clock bindings Navid Ghahremani
2026-10-14 21:48 ` Stefan Dösinger
2026-11-13 0:35 ` Navid Ghahremani
2026-10-15 9:25 ` Krzysztof Kozlowski
2026-11-13 0:37 ` Navid Ghahremani
2026-10-15 9:26 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 05/24] dt-bindings: reset: Add ZTE ZX279128S reset controller bindings Navid Ghahremani
2026-10-15 9:27 ` Krzysztof Kozlowski
2026-11-13 0:37 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 06/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-14 13:21 ` Philipp Zabel
2026-11-13 0:38 ` Navid Ghahremani
2026-10-14 19:39 ` Stefan Dösinger
2026-11-13 0:35 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 07/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-27 21:31 ` Rob Herring (Arm)
2026-10-14 7:20 ` [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-14 21:11 ` Stefan Dösinger
2026-11-13 0:36 ` Navid Ghahremani
2026-10-15 12:25 ` Bartosz Golaszewski
2026-11-13 0:38 ` Navid Ghahremani [this message]
2026-10-14 7:20 ` [PATCH v2 09/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-17 16:20 ` Krzysztof Kozlowski
2026-10-14 7:20 ` [PATCH v2 10/24] dt-bindings: phy: Add ZTE ZX279128S PCIe PHY binding Navid Ghahremani
2026-10-15 9:29 ` Krzysztof Kozlowski
2026-11-13 0:37 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 11/24] phy: zte: Add ZTE ZX279128S PCIe PHY driver Navid Ghahremani
2026-11-06 10:13 ` Agustin Santiago Isasmendi
2026-11-13 0:36 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-27 21:40 ` Rob Herring
2026-11-13 0:37 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-14 13:19 ` Bjorn Helgaas
2026-10-14 21:06 ` Stefan Dösinger
2026-11-13 0:38 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-27 21:34 ` Rob Herring (Arm)
2026-10-14 7:20 ` [PATCH v2 15/24] net: mdio: " Navid Ghahremani
2026-10-14 12:13 ` Andrew Lunn
2026-11-13 0:37 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-14 12:37 ` Andrew Lunn
2026-11-13 0:36 ` Navid Ghahremani
2026-11-13 1:07 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-27 21:48 ` Rob Herring
2026-11-13 0:37 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 19/24] dt-bindings: spi: Add ZTE ZX family SPI flash controller binding Navid Ghahremani
2026-10-14 20:33 ` Stefan Dösinger
2026-10-15 9:35 ` Krzysztof Kozlowski
2026-11-13 0:37 ` Navid Ghahremani
2026-10-15 9:36 ` Krzysztof Kozlowski
2026-10-14 7:21 ` [PATCH v2 20/24] spi: zx: Add ZTE ZX family SPI flash controller driver Navid Ghahremani
2026-10-14 19:28 ` Stefan Dösinger
2026-10-15 9:34 ` Krzysztof Kozlowski
2026-11-13 0:37 ` Navid Ghahremani
2026-10-15 14:29 ` kernel test robot
2026-10-19 12:15 ` Stefan Dösinger
2026-11-13 0:35 ` Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-11-04 0:48 ` Thinh Nguyen
2026-11-13 0:38 ` Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-14 12:52 ` Andrew Lunn
2026-11-13 0:37 ` Navid Ghahremani
2026-11-06 10:13 ` Agustin Santiago Isasmendi
2026-11-13 0:36 ` Navid Ghahremani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261113003824.3670843-1-ghahramani.navid@gmail.com \
--to=ghahramani.navid@gmail.com \
--cc=arnd@arndb.de \
--cc=brgl@kernel.org \
--cc=krzk@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stefandoesinger@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®