From: "Trent Waddington" <trent.waddington@gmail.com>
To: "Rok Markovic" <kernel@kanardia.eu>
Cc: "James C Georgas" <jgeorgas@rogers.com>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: Binary Drivers
Date: Thu, 28 Dec 2006 19:07:21 +1000 [thread overview]
Message-ID: <3d57814d0612280107v11ed3b05g4433566ff7a8960f@mail.gmail.com> (raw)
In-Reply-To: <45938788.4010201@kanardia.eu>
On 12/28/06, Rok Markovic <kernel@kanardia.eu> wrote:
> Do we have a right to reverse engineer hardware, or they are protected by
> patents or something similar that would prevent you from publishing results
> adn/or drivers (open source).
This is a pretty good resource:
http://www.chillingeffects.org/reverse/faq.cgi
Yes, there are probably patents covering this hardware stuff.. and
that's why we have all those open source companies that have given
their patents to an entity that promises to sue in retalitation if
they try to use their patents against open source. So let's not worry
about patents ok? They'd be screwed more than us if they try to use
them.
>
> Are there any restrictions in how you obtain information - signal analyser,
> disassembly of windows driver, etc.
Not as far as I am aware. Obviously if you were to disassemble a
windows driver, add a wrapper and reassemble, that would be copying..
but if you are trying to figure out how something works by reverse
engineering a windows driver then that's ok. At least it is where I
live (Australia) because we have laws that allow us to ignore license
restrictions that say "thou shalt not reverse engineer" for most
interesting purposes. Maybe you have similar laws where you live.
Maybe not.
Hope that helps,
Trent
next prev parent reply other threads:[~2006-12-28 9:07 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-26 11:20 Martin Knoblauch
2006-12-26 13:28 ` James C Georgas
2006-12-26 13:57 ` Martin Knoblauch
2006-12-26 16:37 ` Horst H. von Brand
2006-12-28 8:59 ` Rok Markovic
2006-12-28 9:07 ` Trent Waddington [this message]
2006-12-28 22:32 ` David Schwartz
2006-12-28 22:34 ` David Lang
2006-12-26 19:12 ` David Schwartz
2006-12-26 23:37 ` Horst H. von Brand
[not found] <28wj.2xb.21@gated-at.bofh.it>
[not found] ` <7wu47-3dV-7@gated-at.bofh.it>
2006-12-27 11:55 ` Nikolaos D. Bougalis
-- strict thread matches above, loose matches on Subject: below --
2006-12-26 11:13 Martin Knoblauch
2006-12-26 11:33 ` Trent Waddington
2006-12-26 14:04 ` Martin Knoblauch
[not found] <fa.a8+7qGNMZNO6YbgTojLj7poBcEU@ifi.uio.no>
[not found] ` <fa.whH2sDigxYlZmzC0pHJ6ew9w3Is@ifi.uio.no>
[not found] ` <fa.YLpcIfSTbYXcChK98VmCgG/OEAI@ifi.uio.no>
[not found] ` <fa.m5y0sm7/G8Fnz1bRfMDgwNw+YI4@ifi.uio.no>
2006-12-22 21:27 ` Robert Hancock
2006-12-22 23:15 ` Nikolaos D. Bougalis
2006-12-21 21:15 Niklas Steinkamp
2006-12-22 19:22 ` Rok Markovic
2006-12-22 22:00 ` Wolfgang Draxinger
2006-12-22 22:14 ` Scott Preece
2006-12-23 7:19 ` David Schwartz
2006-12-23 23:11 ` Horst H. von Brand
2006-12-24 6:46 ` Valdis.Kletnieks
2006-12-24 13:31 ` Wolfgang Draxinger
2006-12-24 17:33 ` David Schwartz
2006-12-24 19:27 ` James C Georgas
2006-12-24 21:05 ` Rok Markovic
2006-12-25 0:09 ` Horst H. von Brand
2006-12-24 20:20 ` Horst H. von Brand
2006-12-25 0:30 ` Wolfgang Draxinger
2006-12-26 0:20 ` David Schwartz
2006-12-26 2:49 ` Scott Preece
2006-12-26 6:31 ` David Schwartz
2006-12-26 19:20 ` Scott Preece
2006-12-26 19:53 ` David Schwartz
2006-12-27 1:20 ` Scott Preece
2006-12-28 13:32 ` Pavel Machek
[not found] <7ssWL-8rd-15@gated-at.bofh.it>
[not found] ` <7sE1N-2Y4-5@gated-at.bofh.it>
[not found] ` <7t39Q-Ru-9@gated-at.bofh.it>
2006-12-21 12:33 ` Nikolaos D. Bougalis
2006-12-15 21:20 James Porter
2006-12-15 21:59 ` Alan
2006-12-15 22:00 ` Jan Engelhardt
2006-12-18 14:31 ` Lennart Sorensen
2006-12-15 22:01 ` Alexey Dobriyan
2006-12-16 1:57 ` Tomas Carnecky
2006-12-16 18:03 ` Jan Engelhardt
2006-12-18 14:34 ` Eric W. Biederman
2006-12-21 16:33 ` Scott Preece
2006-12-21 17:43 ` Erik Mouw
2006-12-21 19:10 ` Tomas Carnecky
[not found] ` <f0e2c5070612211120wa6e3402p2ffb6e1d579a485a@mail.gmail.com>
2006-12-21 19:42 ` Tomas Carnecky
2006-12-21 22:36 ` Dave Neuer
2006-12-21 20:32 ` Eric W. Biederman
2006-12-21 20:18 ` Eric W. Biederman
2006-12-21 22:02 ` Scott Preece
2006-12-21 20:50 ` David Schwartz
2006-12-21 20:58 ` David Lang
2006-12-21 21:20 ` Valdis.Kletnieks
2006-12-21 22:12 ` Scott Preece
2006-12-21 23:20 ` Martin Mares
2006-12-22 0:38 ` Valdis.Kletnieks
2006-12-22 9:47 ` Wolfgang Draxinger
2006-12-23 1:04 ` Horst H. von Brand
2006-12-16 3:56 ` jdow
2006-12-16 4:59 ` Dave Airlie
2006-12-17 11:44 ` Geert Uytterhoeven
2006-12-16 8:08 ` Pavel Machek
2006-12-16 9:07 ` Marek Wawrzyczny
2006-12-17 12:17 ` Denis Vlasenko
2006-12-18 9:51 ` Bernd Petrovitsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d57814d0612280107v11ed3b05g4433566ff7a8960f@mail.gmail.com \
--to=trent.waddington@gmail.com \
--cc=jgeorgas@rogers.com \
--cc=kernel@kanardia.eu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®