[PATCH v3 0/5] Add UFS support for Glymur Qualcomm SoC

[PATCH v3 0/5] Add UFS support for Glymur Qualcomm SoC

[Pradeep P V K]

This series adds the DT bindings, device tree support for the UFS PHY
and UFS Host Controller, along with the required PHY driver updates to
enable UFS support on the Glymur Qualcomm platform.

Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
Changes in v3:
- Rebased on top of latest linux-next(tag: next-20261006).
- Retained all RB-by and AB-by tags as is.
- Link to v2: https://lore.kernel.org/r/20260918-glymur_ufs_qcb_enablement-v2-0-16619f7e36a6@oss.qualcomm.com

Changes in v2:
- Added 201.5MHz OPP svs l1 entry [Konrad]
- Addressed minor cosmetic edits [Konrad]
- Sorted references label alphabetically [Konrad]
- Add RB-by for SoC dtsi & board dts [Abel]
- Add RB-by for phy driver changes [Abel]
- Add AB-by for phy driver changes [Konrad]
- Link to v1: https://lore.kernel.org/r/20260911-glymur_ufs_qcb_enablement-v1-0-b9fc5e2ee99a@oss.qualcomm.com

---
Pradeep P V K (5):
      dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Document Glymur QMP UFS PHY
      scsi: ufs: qcom: dt-bindings: Document Glymur UFS controller
      arm64: dts: qcom: glymur: Add UFS nodes
      arm64: dts: qcom: glymur-qcb: Enable UFS
      phy: qcom-qmp-ufs: Add Glymur support

 .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml    |   2 +
 .../devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml |   3 +
 arch/arm64/boot/dts/qcom/glymur-qcb.dts            |  18 +++
 arch/arm64/boot/dts/qcom/glymur.dtsi               | 125 ++++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c            |  99 ++++++++++++++++
 5 files changed, 244 insertions(+), 3 deletions(-)
---
base-commit: eea3fef32a9cf36abcb5975a5a594e4135a6b026
change-id: 20260911-glymur_ufs_qcb_enablement-1524a497520b

Best regards,
-- 
Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>

[PATCH v3 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Document Glymur QMP UFS PHY

[Pradeep P V K]

Document the QMP UFS PHY on Glymur SoC.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index eb289c09906a..fb631f906513 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -42,6 +42,7 @@ properties:
               - qcom,kaanapali-qmp-ufs-phy
           - const: qcom,sm8750-qmp-ufs-phy
       - enum:
+          - qcom,glymur-qmp-ufs-phy
           - qcom,hawi-qmp-ufs-phy
           - qcom,milos-qmp-ufs-phy
           - qcom,msm8996-qmp-ufs-phy
@@ -113,6 +114,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,glymur-qmp-ufs-phy
               - qcom,hawi-qmp-ufs-phy
               - qcom,milos-qmp-ufs-phy
               - qcom,msm8998-qmp-ufs-phy

-- 
2.34.1

[PATCH v3 2/5] scsi: ufs: qcom: dt-bindings: Document Glymur UFS controller

[Pradeep P V K]

Document UFS Host Controller on Glymur SoC. Glymur UFSHC has a
multi-queue command (MCQ) register range in addition to the standard
one. So, both reg entries are required.

Acked-by: Martin K. Petersen <mkp@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml
index d03295806657..f132b1a9ebc2 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml
@@ -16,6 +16,7 @@ select:
       contains:
         enum:
           - qcom,eliza-ufshc
+          - qcom,glymur-ufshc
           - qcom,hawi-ufshc
           - qcom,kaanapali-ufshc
           - qcom,maili-ufshc
@@ -30,6 +31,7 @@ properties:
     items:
       - enum:
           - qcom,eliza-ufshc
+          - qcom,glymur-ufshc
           - qcom,hawi-ufshc
           - qcom,kaanapali-ufshc
           - qcom,maili-ufshc
@@ -80,6 +82,7 @@ allOf:
           contains:
             enum:
               - qcom,eliza-ufshc
+              - qcom,glymur-ufshc
               - qcom,maili-ufshc
               - qcom,nord-ufshc
     then:

-- 
2.34.1

Re: [PATCH v3 2/5] scsi: ufs: qcom: dt-bindings: Document Glymur UFS controller

[Manivannan Sadhasivam]

On Wed, Oct 07, 2026 at 11:59:35AM +0530, Pradeep P V K wrote:
> Document UFS Host Controller on Glymur SoC. Glymur UFSHC has a
> multi-queue command (MCQ) register range in addition to the standard
> one. So, both reg entries are required.
> 
> Acked-by: Martin K. Petersen <mkp@kernel.org>

This was a mistake. You clubbed both UFS controller and PHY patches in a single
series and the UFS maintainer ended up acking the patch assuming dependency
instead of merging the patch.

Please send the PHY and controller patches separately.

- Mani

-- 
மணிவண்ணன் சதாசிவம்

[PATCH v3 3/5] arm64: dts: qcom: glymur: Add UFS nodes

[Pradeep P V K]

Add UFS PHY and UFS host controller nodes for Glymur SoC.

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 125 ++++++++++++++++++++++++++++++++++-
 1 file changed, 122 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 65a398c0a992..49ef89b41aad 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -811,9 +811,9 @@ gcc: clock-controller@100000 {
 				 <0>,				/* QUSB4 1 PHY RX 1 */
 				 <0>,				/* QUSB4 2 PHY RX 0 */
 				 <0>,				/* QUSB4 2 PHY RX 1 */
-				 <0>,				/* UFS PHY RX Symbol 0 */
-				 <0>,				/* UFS PHY RX Symbol 1 */
-				 <0>,				/* UFS PHY TX Symbol 0 */
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <&usb_2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
@@ -4102,6 +4102,125 @@ rng: rng@10c3000 {
 			reg = <0x0 0x010c3000 0x0 0x1000>;
 		};
 
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,glymur-qmp-ufs-phy";
+			reg = <0x0 0x01d80000 0x0 0x2000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 /* UFS and PCIE4 share the same clkref */
+				 <&tcsr TCSR_PCIE_4_CLKREF_EN>;
+
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,glymur-ufshc",
+				     "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>,
+			      <0x0 0x01da0000 0x0 0x15000>;
+			reg-names = "std",
+				    "mcq";
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_LN_BB_CLK3>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre2_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x460 0>;
+			dma-coherent;
+
+			msi-parent = <&gic_its 0x460>;
+			lanes-per-direction = <2>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;

-- 
2.34.1

Re: [PATCH v3 3/5] arm64: dts: qcom: glymur: Add UFS nodes

[Dmitry Baryshkov]

On Wed, Oct 07, 2026 at 11:59:36AM +0530, Pradeep P V K wrote:
> Add UFS PHY and UFS host controller nodes for Glymur SoC.
> 
> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/glymur.dtsi | 125 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 122 insertions(+), 3 deletions(-)
> 
> @@ -4102,6 +4102,125 @@ rng: rng@10c3000 {
>  			reg = <0x0 0x010c3000 0x0 0x1000>;
>  		};
>  
> +		ufs_mem_phy: phy@1d80000 {
> +			compatible = "qcom,glymur-qmp-ufs-phy";
> +			reg = <0x0 0x01d80000 0x0 0x2000>;
> +
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
> +				 /* UFS and PCIE4 share the same clkref */
> +				 <&tcsr TCSR_PCIE_4_CLKREF_EN>;
> +
> +			clock-names = "ref",
> +				      "ref_aux",
> +				      "qref";
> +
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";

power-domains = <&gcc GCC_UFS_PHY_GDSC> ? Or is there
GCC_UFS_MEM_PHY_GDSC, which is simply not described in gcc?

If there are none, it should be reflected in the DT bindings, together
with the explanation in the commit message.

> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +

-- 
With best wishes
Dmitry

Re: [PATCH v3 3/5] arm64: dts: qcom: glymur: Add UFS nodes

[Pradeep Pragallapati]

On 10/7/2026 1:13 PM, Dmitry Baryshkov wrote:
> On Wed, Oct 07, 2026 at 11:59:36AM +0530, Pradeep P V K wrote:
>> Add UFS PHY and UFS host controller nodes for Glymur SoC.
>>
>> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
>> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
>> ---
>>  arch/arm64/boot/dts/qcom/glymur.dtsi | 125 ++++++++++++++++++++++++++++++++++-
>>  1 file changed, 122 insertions(+), 3 deletions(-)
>>
>> @@ -4102,6 +4102,125 @@ rng: rng@10c3000 {
>>  			reg = <0x0 0x010c3000 0x0 0x1000>;
>>  		};
>>  
>> +		ufs_mem_phy: phy@1d80000 {
>> +			compatible = "qcom,glymur-qmp-ufs-phy";
>> +			reg = <0x0 0x01d80000 0x0 0x2000>;
>> +
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
>> +				 /* UFS and PCIE4 share the same clkref */
>> +				 <&tcsr TCSR_PCIE_4_CLKREF_EN>;
>> +
>> +			clock-names = "ref",
>> +				      "ref_aux",
>> +				      "qref";
>> +
>> +			resets = <&ufs_mem_hc 0>;
>> +			reset-names = "ufsphy";
> 
> power-domains = <&gcc GCC_UFS_PHY_GDSC> ? Or is there
> GCC_UFS_MEM_PHY_GDSC, which is simply not described in gcc?
> 
> If there are none, it should be reflected in the DT bindings, together
> with the explanation in the commit message.
> 
Yes, Glymur SoC does not support UFS PHY GDSC. Sure, i will update the DT-bindings accordingly and include the explanation in the commit of next patch series.

>> +
>> +			#clock-cells = <1>;
>> +			#phy-cells = <0>;
>> +
>> +			status = "disabled";
>> +		};
>> +
> 

Re: [PATCH v3 3/5] arm64: dts: qcom: glymur: Add UFS nodes

[Pankaj Patil]

On 10/7/2026 4:30 PM, Pradeep Pragallapati wrote:
> 
> 
> On 10/7/2026 1:13 PM, Dmitry Baryshkov wrote:
>> On Wed, Oct 07, 2026 at 11:59:36AM +0530, Pradeep P V K wrote:
>>> Add UFS PHY and UFS host controller nodes for Glymur SoC.
>>>
>>> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
>>> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/glymur.dtsi | 125 ++++++++++++++++++++++++++++++++++-
>>>  1 file changed, 122 insertions(+), 3 deletions(-)
>>>
>>> @@ -4102,6 +4102,125 @@ rng: rng@10c3000 {
>>>  			reg = <0x0 0x010c3000 0x0 0x1000>;
>>>  		};
>>>  
>>> +		ufs_mem_phy: phy@1d80000 {
>>> +			compatible = "qcom,glymur-qmp-ufs-phy";
>>> +			reg = <0x0 0x01d80000 0x0 0x2000>;
>>> +
>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>>> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
>>> +				 /* UFS and PCIE4 share the same clkref */
>>> +				 <&tcsr TCSR_PCIE_4_CLKREF_EN>;
>>> +
>>> +			clock-names = "ref",
>>> +				      "ref_aux",
>>> +				      "qref";
>>> +
>>> +			resets = <&ufs_mem_hc 0>;
>>> +			reset-names = "ufsphy";
>>
>> power-domains = <&gcc GCC_UFS_PHY_GDSC> ? Or is there
>> GCC_UFS_MEM_PHY_GDSC, which is simply not described in gcc?
>>
>> If there are none, it should be reflected in the DT bindings, together
>> with the explanation in the commit message.
>>
> Yes, Glymur SoC does not support UFS PHY GDSC. Sure, i will update the DT-bindings accordingly and include the explanation in the commit of next patch series.

The support exists? I can see the gdsc in gcc-glymur.c
https://elixir.bootlin.com/linux/v7.3-rc5/source/drivers/clk/qcom/gcc-glymur.c#L7768


> 
>>> +
>>> +			#clock-cells = <1>;
>>> +			#phy-cells = <0>;
>>> +
>>> +			status = "disabled";
>>> +		};
>>> +
>>
> 
> 

Re: [PATCH v3 3/5] arm64: dts: qcom: glymur: Add UFS nodes

[Pradeep Pragallapati]

On 10/7/2026 5:05 PM, Pankaj Patil wrote:
> On 10/7/2026 4:30 PM, Pradeep Pragallapati wrote:
>>
>>
>> On 10/7/2026 1:13 PM, Dmitry Baryshkov wrote:
>>> On Wed, Oct 07, 2026 at 11:59:36AM +0530, Pradeep P V K wrote:
>>>> Add UFS PHY and UFS host controller nodes for Glymur SoC.
>>>>
>>>> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
>>>> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
>>>> ---
>>>>  arch/arm64/boot/dts/qcom/glymur.dtsi | 125 ++++++++++++++++++++++++++++++++++-
>>>>  1 file changed, 122 insertions(+), 3 deletions(-)
>>>>
>>>> @@ -4102,6 +4102,125 @@ rng: rng@10c3000 {
>>>>  			reg = <0x0 0x010c3000 0x0 0x1000>;
>>>>  		};
>>>>  
>>>> +		ufs_mem_phy: phy@1d80000 {
>>>> +			compatible = "qcom,glymur-qmp-ufs-phy";
>>>> +			reg = <0x0 0x01d80000 0x0 0x2000>;
>>>> +
>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>>>> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
>>>> +				 /* UFS and PCIE4 share the same clkref */
>>>> +				 <&tcsr TCSR_PCIE_4_CLKREF_EN>;
>>>> +
>>>> +			clock-names = "ref",
>>>> +				      "ref_aux",
>>>> +				      "qref";
>>>> +
>>>> +			resets = <&ufs_mem_hc 0>;
>>>> +			reset-names = "ufsphy";
>>>
>>> power-domains = <&gcc GCC_UFS_PHY_GDSC> ? Or is there
>>> GCC_UFS_MEM_PHY_GDSC, which is simply not described in gcc?
>>>
>>> If there are none, it should be reflected in the DT bindings, together
>>> with the explanation in the commit message.
>>>
>> Yes, Glymur SoC does not support UFS PHY GDSC. Sure, i will update the DT-bindings accordingly and include the explanation in the commit of next patch series.
> 
> The support exists? I can see the gdsc in gcc-glymur.c
> https://elixir.bootlin.com/linux/v7.3-rc5/source/drivers/clk/qcom/gcc-glymur.c#L7768

This (gcc_ufs_phy_gdsc) is for UFSHC but for ufs phy (gcc_ufs_mem_phy_gdsc) the support was not present.> 
> 
>>
>>>> +
>>>> +			#clock-cells = <1>;
>>>> +			#phy-cells = <0>;
>>>> +
>>>> +			status = "disabled";
>>>> +		};
>>>> +
>>>
>>
>>
> 

[PATCH v3 4/5] arm64: dts: qcom: glymur-qcb: Enable UFS

[Pradeep P V K]

Enable UFS for glymur-qcb board.

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-qcb.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur-qcb.dts b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
index 17d8ff3aed23..f17181bfeadb 100644
--- a/arch/arm64/boot/dts/qcom/glymur-qcb.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
@@ -697,3 +697,21 @@ bluetooth {
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
 	};
 };
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 250 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_e0_2p4>;
+	vcc-max-microamp = <1200000>;
+	vccq-supply = <&vreg_l12b_e0_1p14>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1c_e1_0p82>;
+	vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+
+	status = "okay";
+};

-- 
2.34.1

[PATCH v3 5/5] phy: qcom-qmp-ufs: Add Glymur support

[Pradeep P V K]

Add the init sequence tables and config for the UFS QMP phy found in
the Glymur SoC.

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 99 +++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index d15db9ab9a90..f441b26bb8a6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -93,6 +93,59 @@ static const unsigned int ufsphy_v7_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V7_PCS_UFS_POWER_DOWN_CONTROL,
 };
 
+static const struct qmp_phy_init_tbl glymur_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_FO_GAIN_RATE4, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_SO_GAIN_RATE4, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_PI_CONTROLS, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_VGA_CAL_MAN_VAL, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B0, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B1, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B2, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B6, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE_0_1_B7, 0x62),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE2_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE2_B6, 0xe2),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE2_B7, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B0, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B1, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B2, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B3, 0x9b),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B4, 0x2a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B5, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B7, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE3_B8, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B0, 0x93),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B1, 0x93),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B2, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B3, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B4, 0x5f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B5, 0x92),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B6, 0xe3),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SA_B7, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B0, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B1, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B2, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B3, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B4, 0x5f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B5, 0x92),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B6, 0xfb),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_MODE_RATE4_SB_B7, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_SO_SATURATION, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_UCDR_PI_CTRL1, 0x94),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_TERM_BW_CTRL0, 0xfa),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_DLL0_FTUNE_CTRL, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V7_RX_SIGDET_CAL_TRIM, 0x77),
+};
+
 static const struct qmp_phy_init_tbl milos_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
@@ -1212,6 +1265,11 @@ struct qmp_ufs {
 };
 
 /* Regulator bulk data with load values for specific configurations */
+static const struct regulator_bulk_data glymur_ufsphy_vreg_l[] = {
+	{ .supply = "vdda-phy", .init_load_uA = 217130 },
+	{ .supply = "vdda-pll", .init_load_uA = 18340 },
+};
+
 static const struct regulator_bulk_data milos_ufsphy_vreg_l[] = {
 	{ .supply = "vdda-phy", .init_load_uA = 140120 },
 	{ .supply = "vdda-pll", .init_load_uA = 18340 },
@@ -1324,6 +1382,44 @@ static const struct qmp_ufs_offsets qmp_ufs_offsets_v7 = {
 	.rx2		= 0x3000,
 };
 
+static const struct qmp_phy_cfg glymur_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets_v6,
+	.max_supported_gear	= UFS_HS_G5,
+
+	.tbls = {
+		.serdes		= sm8750_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8750_ufsphy_serdes),
+		.tx		= sm8750_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8750_ufsphy_tx),
+		.rx		= glymur_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(glymur_ufsphy_rx),
+		.pcs		= sm8750_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8750_ufsphy_pcs),
+	},
+
+	.tbls_hs_b = {
+		.pcs		= sm8750_ufsphy_hs_b_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8750_ufsphy_hs_b_pcs),
+	},
+
+	.tbls_hs_overlay[0] = {
+		.pcs		= sm8750_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8750_ufsphy_g4_pcs),
+		.max_gear	= UFS_HS_G4,
+	},
+	.tbls_hs_overlay[1] = {
+		.pcs		= sm8650_ufsphy_g5_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8650_ufsphy_g5_pcs),
+		.max_gear	= UFS_HS_G5,
+	},
+
+	.vreg_list		= glymur_ufsphy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(glymur_ufsphy_vreg_l),
+	.regs			= ufsphy_v6_regs_layout,
+};
+
 static const struct qmp_phy_cfg milos_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -2371,6 +2467,9 @@ static int qmp_ufs_probe(struct platform_device *pdev)
 
 static const struct of_device_id qmp_ufs_of_match_table[] = {
 	{
+		.compatible = "qcom,glymur-qmp-ufs-phy",
+		.data = &glymur_ufsphy_cfg,
+	}, {
 		.compatible = "qcom,hawi-qmp-ufs-phy",
 		.data = &hawi_ufsphy_cfg,
 	}, {

-- 
2.34.1

Re: [PATCH v3 5/5] phy: qcom-qmp-ufs: Add Glymur support

[Dmitry Baryshkov]

On Wed, Oct 07, 2026 at 11:59:38AM +0530, Pradeep P V K wrote:
> Add the init sequence tables and config for the UFS QMP phy found in
> the Glymur SoC.
> 
> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 99 +++++++++++++++++++++++++++++++++
>  1 file changed, 99 insertions(+)
> 
> +	.offsets		= &qmp_ufs_offsets_v6,

So, is it a PHY using v6 offsets, but v7 registers inside?

> +	.max_supported_gear	= UFS_HS_G5,
> +
> +	.vreg_list		= glymur_ufsphy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(glymur_ufsphy_vreg_l),
> +	.regs			= ufsphy_v6_regs_layout,

v7

> +};
> +
>  static const struct qmp_phy_cfg milos_ufsphy_cfg = {
>  	.lanes			= 2,
>  

-- 
With best wishes
Dmitry

Re: [PATCH v3 5/5] phy: qcom-qmp-ufs: Add Glymur support

[Pradeep Pragallapati]

On 10/7/2026 1:18 PM, Dmitry Baryshkov wrote:
> On Wed, Oct 07, 2026 at 11:59:38AM +0530, Pradeep P V K wrote:
>> Add the init sequence tables and config for the UFS QMP phy found in
>> the Glymur SoC.
>>
>> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
>> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
>> ---
>>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 99 +++++++++++++++++++++++++++++++++
>>  1 file changed, 99 insertions(+)
>>
>> +	.offsets		= &qmp_ufs_offsets_v6,
> 
> So, is it a PHY using v6 offsets, but v7 registers inside?
> 
The QSERDES RX0 register offsets on Glymur SoC are aligned with the v7 register layout offsets.
Therefore, the v7 QSERDES RX0 register offsets are used for Glymur (similar to SM8750).

>> +	.max_supported_gear	= UFS_HS_G5,
>> +
>> +	.vreg_list		= glymur_ufsphy_vreg_l,
>> +	.num_vregs		= ARRAY_SIZE(glymur_ufsphy_vreg_l),
>> +	.regs			= ufsphy_v6_regs_layout,
> 
> v7
> 
>> +};
>> +
>>  static const struct qmp_phy_cfg milos_ufsphy_cfg = {
>>  	.lanes			= 2,
>>  
> 

Re: [PATCH v3 5/5] phy: qcom-qmp-ufs: Add Glymur support

[Dmitry Baryshkov]

On Wed, Oct 07, 2026 at 05:03:02PM +0530, Pradeep Pragallapati wrote:
> 
> 
> On 10/7/2026 1:18 PM, Dmitry Baryshkov wrote:
> > On Wed, Oct 07, 2026 at 11:59:38AM +0530, Pradeep P V K wrote:
> >> Add the init sequence tables and config for the UFS QMP phy found in
> >> the Glymur SoC.
> >>
> >> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> >> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> >> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
> >> ---
> >>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 99 +++++++++++++++++++++++++++++++++
> >>  1 file changed, 99 insertions(+)
> >>
> >> +	.offsets		= &qmp_ufs_offsets_v6,
> > 
> > So, is it a PHY using v6 offsets, but v7 registers inside?
> > 
> The QSERDES RX0 register offsets on Glymur SoC are aligned with the v7 register layout offsets.
> Therefore, the v7 QSERDES RX0 register offsets are used for Glymur (similar to SM8750).

Mention in the commit message, please.

> 
> >> +	.max_supported_gear	= UFS_HS_G5,
> >> +
> >> +	.vreg_list		= glymur_ufsphy_vreg_l,
> >> +	.num_vregs		= ARRAY_SIZE(glymur_ufsphy_vreg_l),
> >> +	.regs			= ufsphy_v6_regs_layout,
> > 
> > v7

This still holds.

> > 
> >> +};
> >> +
> >>  static const struct qmp_phy_cfg milos_ufsphy_cfg = {
> >>  	.lanes			= 2,
> >>  
> > 
> 
> 
> -- 
> linux-phy mailing list
> linux-phy@lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy

-- 
With best wishes
Dmitry

Re: [PATCH v3 5/5] phy: qcom-qmp-ufs: Add Glymur support

[Pradeep Pragallapati]

On 10/7/2026 7:13 PM, Dmitry Baryshkov wrote:
> On Wed, Oct 07, 2026 at 05:03:02PM +0530, Pradeep Pragallapati wrote:
>>
>>
>> On 10/7/2026 1:18 PM, Dmitry Baryshkov wrote:
>>> On Wed, Oct 07, 2026 at 11:59:38AM +0530, Pradeep P V K wrote:
>>>> Add the init sequence tables and config for the UFS QMP phy found in
>>>> the Glymur SoC.
>>>>
>>>> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
>>>> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>>>> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
>>>> ---
>>>>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 99 +++++++++++++++++++++++++++++++++
>>>>  1 file changed, 99 insertions(+)
>>>>
>>>> +	.offsets		= &qmp_ufs_offsets_v6,
>>>
>>> So, is it a PHY using v6 offsets, but v7 registers inside?
>>>
>> The QSERDES RX0 register offsets on Glymur SoC are aligned with the v7 register layout offsets.
>> Therefore, the v7 QSERDES RX0 register offsets are used for Glymur (similar to SM8750).
> 
> Mention in the commit message, please.
sure, i will mention it.> 
>>
>>>> +	.max_supported_gear	= UFS_HS_G5,
>>>> +
>>>> +	.vreg_list		= glymur_ufsphy_vreg_l,
>>>> +	.num_vregs		= ARRAY_SIZE(glymur_ufsphy_vreg_l),
>>>> +	.regs			= ufsphy_v6_regs_layout,
>>>
>>> v7
> 
> This still holds.
>
Do you mean changing ufsphy_v6_regs_layout to ufsphy_v7_regs_layout?
If so, no. ufsphy_v6_regs_layout contains the PCS register offsets, and the 
PCS register offsets on Glymur are aligned with ufsphy_v6_regs_layout, similar to SM8750.
 
>>>
>>>> +};
>>>> +
>>>>  static const struct qmp_phy_cfg milos_ufsphy_cfg = {
>>>>  	.lanes			= 2,
>>>>  
>>>
>>
>>
>> -- 
>> linux-phy mailing list
>> linux-phy@lists.infradead.org
>> https://lists.infradead.org/mailman/listinfo/linux-phy
> 

Re: [PATCH v3 5/5] phy: qcom-qmp-ufs: Add Glymur support

[Dmitry Baryshkov]

On Wed, Oct 07, 2026 at 08:15:39PM +0530, Pradeep Pragallapati wrote:
> 
> 
> On 10/7/2026 7:13 PM, Dmitry Baryshkov wrote:
> > On Wed, Oct 07, 2026 at 05:03:02PM +0530, Pradeep Pragallapati wrote:
> >>
> >>
> >> On 10/7/2026 1:18 PM, Dmitry Baryshkov wrote:
> >>> On Wed, Oct 07, 2026 at 11:59:38AM +0530, Pradeep P V K wrote:
> >>>> Add the init sequence tables and config for the UFS QMP phy found in
> >>>> the Glymur SoC.
> >>>>
> >>>> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> >>>> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> >>>> Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
> >>>> ---
> >>>>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 99 +++++++++++++++++++++++++++++++++
> >>>>  1 file changed, 99 insertions(+)
> >>>>
> >>>> +	.offsets		= &qmp_ufs_offsets_v6,
> >>>
> >>> So, is it a PHY using v6 offsets, but v7 registers inside?
> >>>
> >> The QSERDES RX0 register offsets on Glymur SoC are aligned with the v7 register layout offsets.
> >> Therefore, the v7 QSERDES RX0 register offsets are used for Glymur (similar to SM8750).
> > 
> > Mention in the commit message, please.
> sure, i will mention it.> 
> >>
> >>>> +	.max_supported_gear	= UFS_HS_G5,
> >>>> +
> >>>> +	.vreg_list		= glymur_ufsphy_vreg_l,
> >>>> +	.num_vregs		= ARRAY_SIZE(glymur_ufsphy_vreg_l),
> >>>> +	.regs			= ufsphy_v6_regs_layout,
> >>>
> >>> v7
> > 
> > This still holds.
> >
> Do you mean changing ufsphy_v6_regs_layout to ufsphy_v7_regs_layout?
> If so, no. ufsphy_v6_regs_layout contains the PCS register offsets, and the 
> PCS register offsets on Glymur are aligned with ufsphy_v6_regs_layout, similar to SM8750.

=> commit message, please.

-- 
With best wishes
Dmitry