Re: [PATCH v2 3/8] clk: qcom: common: Manage rpm, configure PLLs & AON clks in really probe

[Jagadeesh Kona <quic_jkona@quicinc.com>]

On 3/7/2025 2:17 PM, Dmitry Baryshkov wrote:
> On Thu, Mar 06, 2025 at 02:25:35PM +0530, Jagadeesh Kona wrote:
>> Add support for runtime power management, PLL configuration and enabling
>> critical clocks in qcom_cc_really_probe() to commonize the clock
>> controller probe.
> 
> Please split this into two commits: one for the runtime PM and another
> one for clock configuration, because ...
> 

Sure, will split this in the next series.

>>
>> The runtime power management is not required for all clock controllers,
>> hence handle the rpm based on use_rpm flag in clock controller descriptor.
>> Also the power domains need to be kept enabled during pll configuration,
>> hence attach all required power domains prior to calling get_sync() on the
>> device.
>>
>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
>> ---
>>  drivers/clk/qcom/common.c | 45 ++++++++++++++++++++++++++++++++++++---------
>>  drivers/clk/qcom/common.h | 16 ++++++++++++++++
>>  2 files changed, 52 insertions(+), 9 deletions(-)
> 
> [...]
> 
>> +
>> +	for (i = 0; i < desc->num_plls; i++)
>> +		qcom_cc_clk_pll_configure(desc->plls[i], regmap);
>> +
>> +	for (i = 0 ; i < desc->num_clks_cfg; i++)
>> +		regmap_update_bits(regmap, clks_cfg[i].offset,
>> +				   clks_cfg[i].mask, clks_cfg[i].mask);
>> +
> 
> ... just calling regmap_update_bits() looks like a step backwards. In
> the past several years we got several sensible wrappers and helpers. I
> suggest having a callback instead of a fixed 'update bits' table.
> 

Sure, will check and add a callback to handle all these clock config settings.

Thanks,
Jagadeesh

>>  	reset = &cc->reset;
>>  	reset->rcdev.of_node = dev->of_node;
>>  	reset->rcdev.ops = &qcom_reset_ops;
> 
> The RPM part is fine with me.
>