From: Jaakko Koivisto <jmatko@utu.fi>
To: Joshua Crofts <crofts@kernel.org>, Jaakko Koivisto <jmatko@utu.fi>
Cc: "Andreas Klinger" <ak@it-klinger.de>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/5] iio: chemical: sgp40: Implement get_serial_number-command
Date: Mon, 16 Nov 2026 10:39:11 +0200 [thread overview]
Message-ID: <DMWI07YONKKS.1UI59C2I60ONX@utu.fi> (raw)
In-Reply-To: <20261102112020.00007167@kernel.org>
On Mon Nov 2, 2026 at 12:20 PM EET, Joshua Crofts wrote:
> On Mon, 2 Nov 2026 11:12:56 +0200
> Jaakko Koivisto <jmatko@utu.fi> wrote:
>
>> Add functionality for retrieving SGP40 sensor serial number
>> and present it to the userspace using serialnumber ABI.
>>
>> Signed-off-by: Jaakko Koivisto <jmatko@utu.fi>
>> ---
>> Currently only the bno055 driver uses the serialnumber ABI, and presents
>> the SN in hex. Documentation gives hex output as example format, not hard
>> requirement, but should we use the same format here anyway?
>>
>> drivers/iio/chemical/sgp40.c | 76 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 76 insertions(+)
>>
>> diff --git a/drivers/iio/chemical/sgp40.c b/drivers/iio/chemical/sgp40.c
>> index 080d51f9f53c..e0a300720fce 100644
>> --- a/drivers/iio/chemical/sgp40.c
>> +++ b/drivers/iio/chemical/sgp40.c
>> @@ -35,6 +35,7 @@
>> #include <linux/mutex.h>
>> #include <linux/i2c.h>
>> #include <linux/iio/iio.h>
>> +#include <linux/iio/sysfs.h>
>
> Could you add an additional patch to your series adding any
> missing includes? Just looking at this patch I can see that
> types.h, asm/byteorder.h and delay.h are missing.
>
I can do that. Small question, is it ok to leave compiler_attributes.h and stddef.h
out? Former one is not included in any IIO drivers and the latter one only
in three drivers.
>>
>> /*
>> * floating point calculation of voc is done as integer
>> @@ -70,6 +71,18 @@ struct sgp40_tg_result {
>> u8 res_crc;
>> } __packed;
>>
>> +/*
>> + * Datasheet table 16. Serial number is given as 48-bit value 0xAAAABBBBCCCC.
>> + */
>> +struct sgp40_serial_number_result {
>> + __be16 A;
>> + u8 A_crc;
>> + __be16 B;
>> + u8 B_crc;
>> + __be16 C;
>> + u8 C_crc;
>> +} __packed;
>> +
>> static const struct iio_chan_spec sgp40_channels[] = {
>> {
>> .type = IIO_CONCENTRATION,
>> @@ -161,6 +174,41 @@ static int sgp40_calc_voc(struct sgp40_data *data, u16 resistance_raw, int *voc)
>> return 0;
>> }
>>
>> +static int sgp40_get_serial_number(struct sgp40_data *data, u64 *serial_number)
>> +{
>> + int ret;
>> + struct i2c_client *client = data->client;
>> + struct sgp40_tg_measure get_sn = { .command = {0x36, 0x82} };
>> + struct sgp40_serial_number_result res;
>
> Reverse xmas tree order.
>
Will fix for v3.
>> +
>> + guard(mutex)(&data->lock);
>> +
>> + ret = i2c_master_send(client, (char *)&get_sn, sizeof(get_sn.command));
>> + if (ret < 0)
>> + return ret;
>> + if (ret != sizeof(get_sn.command))
>> + return dev_err_probe(data->dev, -EIO,
>
> Sashiko points out that this function isn't called from probe(),
> therefore it shouldn't use dev_err_probe().
>
From the dev_err_probe() documentation I got the impression that using
it is allowed outside probe() and even if the return is never
-EPROBE_DEFER, just to condense the "dev_err(); return ret;" into single
line and also take advantage of the prettier error formatting of dev_err_probe().
If this is not the case I can change back to dev_err().
> Also, you can use a local variable for dev.
>
Will fix for v3.
>> + "i2c_master_send ret: %d, expected %zu\n", ret, sizeof(get_sn.command));
>> +
>> + fsleep(1000); /* Max duration for get_serial_number command. Datasheet table 8. */
>> +
>> + ret = i2c_master_recv(client, (char *)&res, sizeof(res));
>> + if (ret < 0)
>> + return ret;
>> + if (ret != sizeof(res))
>> + return dev_err_probe(data->dev, -EIO,
>> + "i2c_master_recv ret: %d, expected: %zu\n", ret, sizeof(res));
>> +
>> + if (crc8(sgp40_crc8_table, (u8 *)&res.A, 2, SGP40_CRC8_INIT) != res.A_crc ||
>> + crc8(sgp40_crc8_table, (u8 *)&res.B, 2, SGP40_CRC8_INIT) != res.B_crc ||
>> + crc8(sgp40_crc8_table, (u8 *)&res.C, 2, SGP40_CRC8_INIT) != res.C_crc)
>> + return dev_err_probe(data->dev, -EIO, "CRC error in get_serial_number\n");
>> +
>> + *serial_number = ((u64)be16_to_cpu(res.A) << 32) | ((u64)be16_to_cpu(res.B) << 16) | (u64)be16_to_cpu(res.C);
>> + return 0;
>> +}
>> +
>> static int sgp40_measure_resistance_raw(struct sgp40_data *data, u16 *resistance_raw)
>> {
>> int ret;
>> @@ -306,9 +354,37 @@ static int sgp40_write_raw(struct iio_dev *indio_dev,
>> return -EINVAL;
>> }
>>
>> +static ssize_t serialnumber_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + int ret;
>> + u64 serial_number;
>> + struct sgp40_data *data = iio_priv(dev_to_iio_dev(dev));
>
> Reverse xmas tree.
>
> ...
next prev parent reply other threads:[~2026-11-16 8:39 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 9:12 [PATCH v2 0/5] iio: chemical: sgp40: add funtions for serial number readback, self-test, and heater control Jaakko Koivisto
2026-11-02 9:12 ` [PATCH v2 1/5] iio: chemical: sgp40: Do not convert I2C errors to EIO Jaakko Koivisto
2026-11-02 9:54 ` Joshua Crofts
2026-11-02 9:12 ` [PATCH v2 2/5] iio: chemical: sgp40: Replace manual locking with guard() Jaakko Koivisto
2026-11-02 10:10 ` Joshua Crofts
2026-11-16 8:49 ` Jaakko Koivisto
2026-11-16 9:07 ` Andy Shevchenko
2026-11-03 10:01 ` Andy Shevchenko
2026-11-02 9:12 ` [PATCH v2 3/5] iio: chemical: sgp40: Implement get_serial_number-command Jaakko Koivisto
2026-11-02 10:20 ` Joshua Crofts
2026-11-16 8:39 ` Jaakko Koivisto [this message]
2026-11-02 9:12 ` [PATCH v2 4/5] iio: chemical: sgp40: Implement execute_self_test-command Jaakko Koivisto
2026-11-02 10:21 ` Joshua Crofts
2026-11-08 1:02 ` Jonathan Cameron
2026-11-02 9:56 ` [PATCH v2 5/5] iio: chemical: sgp40: Implement turn_heater_off-command Jaakko Koivisto
2026-11-02 10:24 ` Joshua Crofts
2026-11-08 1:05 ` Jonathan Cameron
2026-11-16 9:23 ` Jaakko Koivisto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DMWI07YONKKS.1UI59C2I60ONX@utu.fi \
--to=jmatko@utu.fi \
--cc=ak@it-klinger.de \
--cc=andy@kernel.org \
--cc=crofts@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®