From: Jonathan McDowell <noodles@earth.li>
To: Michal Suchanek <msuchanek@suse.de>
Cc: Peter Huewe <peterhuewe@gmx.de>,
Jarkko Sakkinen <jarkko@kernel.org>,
Jason Gunthorpe <jgg@ziepe.ca>,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] tpm: tis: Increase the default for timeouts B and C
Date: Wed, 2 Apr 2025 18:45:40 +0100 [thread overview]
Message-ID: <Z-13xOebA3LvQQ-8@earth.li> (raw)
In-Reply-To: <20250402172134.7751-1-msuchanek@suse.de>
On Wed, Apr 02, 2025 at 07:21:30PM +0200, Michal Suchanek wrote:
>With some Infineon chips the timeouts in tpm_tis_send_data (both B and
>C) can reach up to about 2250 ms.
>
>Extend the timeout duration to accommodate this.
The problem here is the bump of timeout_c is going to interact poorly
with the Infineon errata workaround, as now we'll wait 4s instead of
200ms to detect the stuck status change.
(Also shouldn't timeout_c already end up as 750ms, as it's
max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C), and TIS_SHORT_TIMEOUT is 750 vs
200 for TPM2_TIMEOUT_C? That doesn't seem to be borne out by your logs,
nor my results.)
>Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
>Signed-off-by: Michal Suchanek <msuchanek@suse.de>
>---
>An alternative would be to add an entry to vendor_timeout_overrides but
>I do not know how to determine the chip IDs to put into this table.
>---
> drivers/char/tpm/tpm_tis_core.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
>index 970d02c337c7..1ff565be2175 100644
>--- a/drivers/char/tpm/tpm_tis_core.h
>+++ b/drivers/char/tpm/tpm_tis_core.h
>@@ -54,7 +54,7 @@ enum tis_int_flags {
> enum tis_defaults {
> TIS_MEM_LEN = 0x5000,
> TIS_SHORT_TIMEOUT = 750, /* ms */
>- TIS_LONG_TIMEOUT = 2000, /* 2 sec */
>+ TIS_LONG_TIMEOUT = 4000, /* 2 sec */
> TIS_TIMEOUT_MIN_ATML = 14700, /* usecs */
> TIS_TIMEOUT_MAX_ATML = 15000, /* usecs */
> };
>@@ -64,7 +64,7 @@ enum tis_defaults {
> */
> #define TIS_TIMEOUT_A_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
> #define TIS_TIMEOUT_B_MAX max_t(int, TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
>-#define TIS_TIMEOUT_C_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
>+#define TIS_TIMEOUT_C_MAX max_t(int, TIS_LONG_TIMEOUT, TPM2_TIMEOUT_C)
> #define TIS_TIMEOUT_D_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
>
> #define TPM_ACCESS(l) (0x0000 | ((l) << 12))
>--
>2.47.1
>
J.
--
... "Tom's root boot is the Linux world equivalent of a 'get out of jail
free' card. The man is a *hero*." -- Simon Brooke, ucol.
next prev parent reply other threads:[~2025-04-02 18:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-02 17:21 Michal Suchanek
2025-04-02 17:45 ` Jonathan McDowell [this message]
2025-04-02 20:07 ` Michal Suchánek
2025-04-03 9:31 ` Michal Suchánek
2025-04-03 11:00 ` Jonathan McDowell
2025-04-03 11:56 ` Michal Suchánek
2025-04-03 13:00 ` Jonathan McDowell
2025-04-03 14:11 ` Michal Suchánek
2025-04-03 18:25 ` [PATCH] tpm: tis: Increase the default for timeout B Michal Suchanek
2025-04-03 18:28 ` Paul Menzel
2025-04-04 8:23 ` [PATCH v3] tpm: tis: Double the timeout B to 4s Michal Suchanek
2025-04-04 8:53 ` Jarkko Sakkinen
2025-05-14 12:10 ` Michal Suchánek
2025-05-15 1:41 ` Jarkko Sakkinen
2025-05-15 11:17 ` Jarkko Sakkinen
2025-04-03 18:49 ` [PATCH] tpm: tis: Increase the default for timeout B Jarkko Sakkinen
2025-04-04 7:53 ` Michal Suchánek
2025-04-04 8:12 ` Michal Suchánek
2025-04-04 8:14 ` Jarkko Sakkinen
2025-04-03 18:45 ` [PATCH] tpm: tis: Increase the default for timeouts B and C Jarkko Sakkinen
2025-04-03 20:43 ` Jonathan McDowell
2025-04-04 7:51 ` Michal Suchánek
2025-04-04 8:10 ` Jarkko Sakkinen
2025-04-04 9:31 ` Jonathan McDowell
2025-04-04 11:58 ` Jarkko Sakkinen
2025-04-03 18:38 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z-13xOebA3LvQQ-8@earth.li \
--to=noodles@earth.li \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=msuchanek@suse.de \
--cc=peterhuewe@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®