From: "Michal Suchánek" <msuchanek@suse.de>
To: Jonathan McDowell <noodles@earth.li>
Cc: Peter Huewe <peterhuewe@gmx.de>,
Jarkko Sakkinen <jarkko@kernel.org>,
Jason Gunthorpe <jgg@ziepe.ca>,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] tpm: tis: Increase the default for timeouts B and C
Date: Thu, 3 Apr 2025 11:31:48 +0200 [thread overview]
Message-ID: <Z-5VhOpQOeduSUM1@kitsune.suse.cz> (raw)
In-Reply-To: <Z-2ZC2Ew2EtNAW6-@kitsune.suse.cz>
On Wed, Apr 02, 2025 at 10:07:40PM +0200, Michal Suchánek wrote:
> On Wed, Apr 02, 2025 at 06:45:40PM +0100, Jonathan McDowell wrote:
> > On Wed, Apr 02, 2025 at 07:21:30PM +0200, Michal Suchanek wrote:
> > > With some Infineon chips the timeouts in tpm_tis_send_data (both B and
> > > C) can reach up to about 2250 ms.
> > >
> > > Extend the timeout duration to accommodate this.
> >
> > The problem here is the bump of timeout_c is going to interact poorly with
> > the Infineon errata workaround, as now we'll wait 4s instead of 200ms to
> > detect the stuck status change.
>
> Yes, that's problematic. Is it possible to detect the errata by anything
> other than waiting for the timeout to expire?
>
> >
> > (Also shouldn't timeout_c already end up as 750ms, as it's
> > max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C), and TIS_SHORT_TIMEOUT is 750 vs 200
> > for TPM2_TIMEOUT_C? That doesn't seem to be borne out by your logs, nor my
> > results.)
>
> Indeed, it should be 750ms but the logs show 200ms. I do not see
> where it could get reduced, nor any significan difference between the
> mainline code and the kernel I am using in this area.
This would come from
drivers/char/tpm/tpm2-cmd.c: chip->timeout_c = msecs_to_jiffies(TPM2_TIMEOUT_C);
include/linux/tpm.h: TPM2_TIMEOUT_C = 200,
So this would need also adjusting.
Thanks
Michal
>
> Thanks
>
> Michal
>
> >
> > > Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
> > > Signed-off-by: Michal Suchanek <msuchanek@suse.de>
> > > ---
> > > An alternative would be to add an entry to vendor_timeout_overrides but
> > > I do not know how to determine the chip IDs to put into this table.
> > > ---
> > > drivers/char/tpm/tpm_tis_core.h | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> > > index 970d02c337c7..1ff565be2175 100644
> > > --- a/drivers/char/tpm/tpm_tis_core.h
> > > +++ b/drivers/char/tpm/tpm_tis_core.h
> > > @@ -54,7 +54,7 @@ enum tis_int_flags {
> > > enum tis_defaults {
> > > TIS_MEM_LEN = 0x5000,
> > > TIS_SHORT_TIMEOUT = 750, /* ms */
> > > - TIS_LONG_TIMEOUT = 2000, /* 2 sec */
> > > + TIS_LONG_TIMEOUT = 4000, /* 2 sec */
> > > TIS_TIMEOUT_MIN_ATML = 14700, /* usecs */
> > > TIS_TIMEOUT_MAX_ATML = 15000, /* usecs */
> > > };
> > > @@ -64,7 +64,7 @@ enum tis_defaults {
> > > */
> > > #define TIS_TIMEOUT_A_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
> > > #define TIS_TIMEOUT_B_MAX max_t(int, TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
> > > -#define TIS_TIMEOUT_C_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
> > > +#define TIS_TIMEOUT_C_MAX max_t(int, TIS_LONG_TIMEOUT, TPM2_TIMEOUT_C)
> > > #define TIS_TIMEOUT_D_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
> > >
> > > #define TPM_ACCESS(l) (0x0000 | ((l) << 12))
> > > --
> > > 2.47.1
> > >
> >
> > J.
> >
> > --
> > ... "Tom's root boot is the Linux world equivalent of a 'get out of jail
> > free' card. The man is a *hero*." -- Simon Brooke, ucol.
next prev parent reply other threads:[~2025-04-03 9:31 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-02 17:21 Michal Suchanek
2025-04-02 17:45 ` Jonathan McDowell
2025-04-02 20:07 ` Michal Suchánek
2025-04-03 9:31 ` Michal Suchánek [this message]
2025-04-03 11:00 ` Jonathan McDowell
2025-04-03 11:56 ` Michal Suchánek
2025-04-03 13:00 ` Jonathan McDowell
2025-04-03 14:11 ` Michal Suchánek
2025-04-03 18:25 ` [PATCH] tpm: tis: Increase the default for timeout B Michal Suchanek
2025-04-03 18:28 ` Paul Menzel
2025-04-04 8:23 ` [PATCH v3] tpm: tis: Double the timeout B to 4s Michal Suchanek
2025-04-04 8:53 ` Jarkko Sakkinen
2025-05-14 12:10 ` Michal Suchánek
2025-05-15 1:41 ` Jarkko Sakkinen
2025-05-15 11:17 ` Jarkko Sakkinen
2025-04-03 18:49 ` [PATCH] tpm: tis: Increase the default for timeout B Jarkko Sakkinen
2025-04-04 7:53 ` Michal Suchánek
2025-04-04 8:12 ` Michal Suchánek
2025-04-04 8:14 ` Jarkko Sakkinen
2025-04-03 18:45 ` [PATCH] tpm: tis: Increase the default for timeouts B and C Jarkko Sakkinen
2025-04-03 20:43 ` Jonathan McDowell
2025-04-04 7:51 ` Michal Suchánek
2025-04-04 8:10 ` Jarkko Sakkinen
2025-04-04 9:31 ` Jonathan McDowell
2025-04-04 11:58 ` Jarkko Sakkinen
2025-04-03 18:38 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z-5VhOpQOeduSUM1@kitsune.suse.cz \
--to=msuchanek@suse.de \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=noodles@earth.li \
--cc=peterhuewe@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®