mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap
@ 2026-03-01  4:30 David Lechner
  2026-03-02  7:46 ` Thomas Zimmermann
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: David Lechner @ 2026-03-01  4:30 UTC (permalink / raw)
  To: David Lechner, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Simona Vetter,
	Noralf Trønnes, Dmitry Baryshkov
  Cc: dri-devel, linux-kernel, David Lechner

Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
is for a monochrome display that has an unusual data format, so the
default value set in mipi_dbi_spi_init() is not correct simply because
this controller is non-standard.

Previously, we were using dbi->swap_bytes to make the same sort of
workaround, but it was removed in the same commit that added
dbi->write_memory_bpw, so we need to use the latter now to have the
correct behavior.

This fixes every 3 columns of pixels being swapped on the display. There
are 3 pixels per byte, so the byte swap caused this effect.

Fixes: df3fb27a74a4 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/gpu/drm/sitronix/st7586.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/sitronix/st7586.c b/drivers/gpu/drm/sitronix/st7586.c
index b57ebf37a664..16b6b4e368af 100644
--- a/drivers/gpu/drm/sitronix/st7586.c
+++ b/drivers/gpu/drm/sitronix/st7586.c
@@ -347,6 +347,12 @@ static int st7586_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
+	/*
+	 * Override value set by mipi_dbi_spi_init(). This driver is a bit
+	 * non-standard, so best to set it explicitly here.
+	 */
+	dbi->write_memory_bpw = 8;
+
 	/* Cannot read from this controller via SPI */
 	dbi->read_commands = NULL;
 
@@ -356,15 +362,6 @@ static int st7586_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	/*
-	 * we are using 8-bit data, so we are not actually swapping anything,
-	 * but setting mipi->swap_bytes makes mipi_dbi_typec3_command() do the
-	 * right thing and not use 16-bit transfers (which results in swapped
-	 * bytes on little-endian systems and causes out of order data to be
-	 * sent to the display).
-	 */
-	dbi->swap_bytes = true;
-
 	drm_mode_config_reset(drm);
 
 	ret = drm_dev_register(drm, 0);

---
base-commit: 3fa5e5702a82d259897bd7e209469bc06368bf31
change-id: 20260228-drm-mipi-dbi-fix-st7586-byte-swap-f0d03c5f800c

Best regards,
-- 
David Lechner <dlechner@baylibre.com>


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap
  2026-03-01  4:30 [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap David Lechner
@ 2026-03-02  7:46 ` Thomas Zimmermann
  2026-03-03  9:36 ` Thomas Zimmermann
  2026-03-05 10:36 ` Javier Martinez Canillas
  2 siblings, 0 replies; 6+ messages in thread
From: Thomas Zimmermann @ 2026-03-02  7:46 UTC (permalink / raw)
  To: David Lechner, David Lechner, Maarten Lankhorst, Maxime Ripard,
	David Airlie, Simona Vetter, Noralf Trønnes,
	Dmitry Baryshkov, Javier Martinez Canillas
  Cc: dri-devel, linux-kernel

cc Javier

Am 01.03.26 um 05:30 schrieb David Lechner:
> Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
> is for a monochrome display that has an unusual data format, so the
> default value set in mipi_dbi_spi_init() is not correct simply because
> this controller is non-standard.
>
> Previously, we were using dbi->swap_bytes to make the same sort of
> workaround, but it was removed in the same commit that added
> dbi->write_memory_bpw, so we need to use the latter now to have the
> correct behavior.
>
> This fixes every 3 columns of pixels being swapped on the display. There
> are 3 pixels per byte, so the byte swap caused this effect.
>
> Fixes: df3fb27a74a4 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
> Signed-off-by: David Lechner <dlechner@baylibre.com>
> ---
>   drivers/gpu/drm/sitronix/st7586.c | 15 ++++++---------
>   1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/sitronix/st7586.c b/drivers/gpu/drm/sitronix/st7586.c
> index b57ebf37a664..16b6b4e368af 100644
> --- a/drivers/gpu/drm/sitronix/st7586.c
> +++ b/drivers/gpu/drm/sitronix/st7586.c
> @@ -347,6 +347,12 @@ static int st7586_probe(struct spi_device *spi)
>   	if (ret)
>   		return ret;
>   
> +	/*
> +	 * Override value set by mipi_dbi_spi_init(). This driver is a bit
> +	 * non-standard, so best to set it explicitly here.
> +	 */
> +	dbi->write_memory_bpw = 8;
> +
>   	/* Cannot read from this controller via SPI */
>   	dbi->read_commands = NULL;
>   
> @@ -356,15 +362,6 @@ static int st7586_probe(struct spi_device *spi)
>   	if (ret)
>   		return ret;
>   
> -	/*
> -	 * we are using 8-bit data, so we are not actually swapping anything,
> -	 * but setting mipi->swap_bytes makes mipi_dbi_typec3_command() do the
> -	 * right thing and not use 16-bit transfers (which results in swapped
> -	 * bytes on little-endian systems and causes out of order data to be
> -	 * sent to the display).
> -	 */
> -	dbi->swap_bytes = true;
> -
>   	drm_mode_config_reset(drm);
>   
>   	ret = drm_dev_register(drm, 0);
>
> ---
> base-commit: 3fa5e5702a82d259897bd7e209469bc06368bf31
> change-id: 20260228-drm-mipi-dbi-fix-st7586-byte-swap-f0d03c5f800c
>
> Best regards,

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap
  2026-03-01  4:30 [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap David Lechner
  2026-03-02  7:46 ` Thomas Zimmermann
@ 2026-03-03  9:36 ` Thomas Zimmermann
  2026-03-05 10:36 ` Javier Martinez Canillas
  2 siblings, 0 replies; 6+ messages in thread
From: Thomas Zimmermann @ 2026-03-03  9:36 UTC (permalink / raw)
  To: David Lechner, David Lechner, Maarten Lankhorst, Maxime Ripard,
	David Airlie, Simona Vetter, Noralf Trønnes,
	Dmitry Baryshkov
  Cc: dri-devel, linux-kernel



Am 01.03.26 um 05:30 schrieb David Lechner:
> Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
> is for a monochrome display that has an unusual data format, so the
> default value set in mipi_dbi_spi_init() is not correct simply because
> this controller is non-standard.
>
> Previously, we were using dbi->swap_bytes to make the same sort of
> workaround, but it was removed in the same commit that added
> dbi->write_memory_bpw, so we need to use the latter now to have the
> correct behavior.
>
> This fixes every 3 columns of pixels being swapped on the display. There
> are 3 pixels per byte, so the byte swap caused this effect.
>
> Fixes: df3fb27a74a4 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
> Signed-off-by: David Lechner <dlechner@baylibre.com>

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>

> ---
>   drivers/gpu/drm/sitronix/st7586.c | 15 ++++++---------
>   1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/sitronix/st7586.c b/drivers/gpu/drm/sitronix/st7586.c
> index b57ebf37a664..16b6b4e368af 100644
> --- a/drivers/gpu/drm/sitronix/st7586.c
> +++ b/drivers/gpu/drm/sitronix/st7586.c
> @@ -347,6 +347,12 @@ static int st7586_probe(struct spi_device *spi)
>   	if (ret)
>   		return ret;
>   
> +	/*
> +	 * Override value set by mipi_dbi_spi_init(). This driver is a bit
> +	 * non-standard, so best to set it explicitly here.
> +	 */
> +	dbi->write_memory_bpw = 8;
> +
>   	/* Cannot read from this controller via SPI */
>   	dbi->read_commands = NULL;
>   
> @@ -356,15 +362,6 @@ static int st7586_probe(struct spi_device *spi)
>   	if (ret)
>   		return ret;
>   
> -	/*
> -	 * we are using 8-bit data, so we are not actually swapping anything,
> -	 * but setting mipi->swap_bytes makes mipi_dbi_typec3_command() do the
> -	 * right thing and not use 16-bit transfers (which results in swapped
> -	 * bytes on little-endian systems and causes out of order data to be
> -	 * sent to the display).
> -	 */
> -	dbi->swap_bytes = true;
> -
>   	drm_mode_config_reset(drm);
>   
>   	ret = drm_dev_register(drm, 0);
>
> ---
> base-commit: 3fa5e5702a82d259897bd7e209469bc06368bf31
> change-id: 20260228-drm-mipi-dbi-fix-st7586-byte-swap-f0d03c5f800c
>
> Best regards,

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)



^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap
  2026-03-01  4:30 [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap David Lechner
  2026-03-02  7:46 ` Thomas Zimmermann
  2026-03-03  9:36 ` Thomas Zimmermann
@ 2026-03-05 10:36 ` Javier Martinez Canillas
  2026-03-07 23:27   ` David Lechner
  2 siblings, 1 reply; 6+ messages in thread
From: Javier Martinez Canillas @ 2026-03-05 10:36 UTC (permalink / raw)
  To: David Lechner, David Lechner, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Simona Vetter,
	Noralf Trønnes, Dmitry Baryshkov
  Cc: dri-devel, linux-kernel, David Lechner

David Lechner <dlechner@baylibre.com> writes:

> Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
> is for a monochrome display that has an unusual data format, so the
> default value set in mipi_dbi_spi_init() is not correct simply because
> this controller is non-standard.
>
> Previously, we were using dbi->swap_bytes to make the same sort of
> workaround, but it was removed in the same commit that added
> dbi->write_memory_bpw, so we need to use the latter now to have the
> correct behavior.
>
> This fixes every 3 columns of pixels being swapped on the display. There
> are 3 pixels per byte, so the byte swap caused this effect.
>
> Fixes: df3fb27a74a4 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
> Signed-off-by: David Lechner <dlechner@baylibre.com>
> ---

The patch looks good to me.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap
  2026-03-05 10:36 ` Javier Martinez Canillas
@ 2026-03-07 23:27   ` David Lechner
  2026-03-09  9:25     ` Javier Martinez Canillas
  0 siblings, 1 reply; 6+ messages in thread
From: David Lechner @ 2026-03-07 23:27 UTC (permalink / raw)
  To: Javier Martinez Canillas, David Lechner, Maarten Lankhorst,
	Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter,
	Noralf Trønnes, Dmitry Baryshkov
  Cc: dri-devel, linux-kernel

On 3/5/26 4:36 AM, Javier Martinez Canillas wrote:
> David Lechner <dlechner@baylibre.com> writes:
> 
>> Correctly set dbi->write_memory_bpw for the ST7586 driver. This driver
>> is for a monochrome display that has an unusual data format, so the
>> default value set in mipi_dbi_spi_init() is not correct simply because
>> this controller is non-standard.
>>
>> Previously, we were using dbi->swap_bytes to make the same sort of
>> workaround, but it was removed in the same commit that added
>> dbi->write_memory_bpw, so we need to use the latter now to have the
>> correct behavior.
>>
>> This fixes every 3 columns of pixels being swapped on the display. There
>> are 3 pixels per byte, so the byte swap caused this effect.
>>
>> Fixes: df3fb27a74a4 ("drm/mipi-dbi: Make bits per word configurable for pixel transfers")
>> Signed-off-by: David Lechner <dlechner@baylibre.com>
>> ---
> 
> The patch looks good to me.
> 
> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
> 

I pushed this out with: dim push-branch drm-misc-fixes 

(It's been 5 years since I've done that, so hopefully I did it right - I followed
the docs and it all seemed OK to me).

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap
  2026-03-07 23:27   ` David Lechner
@ 2026-03-09  9:25     ` Javier Martinez Canillas
  0 siblings, 0 replies; 6+ messages in thread
From: Javier Martinez Canillas @ 2026-03-09  9:25 UTC (permalink / raw)
  To: David Lechner, David Lechner, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, David Airlie, Simona Vetter,
	Noralf Trønnes, Dmitry Baryshkov
  Cc: dri-devel, linux-kernel

David Lechner <dlechner@baylibre.com> writes:

Hello David,

> On 3/5/26 4:36 AM, Javier Martinez Canillas wrote:
>> David Lechner <dlechner@baylibre.com> writes:
>> 

[...]

>
> I pushed this out with: dim push-branch drm-misc-fixes 
>
> (It's been 5 years since I've done that, so hopefully I did it right - I followed
> the docs and it all seemed OK to me).
>

Yes, you did it correctly AFAICT. Thanks!

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2026-03-09  9:26 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-03-01  4:30 [PATCH] drm/sitronix/st7586: fix bad pixel data due to byte swap David Lechner
2026-03-02  7:46 ` Thomas Zimmermann
2026-03-03  9:36 ` Thomas Zimmermann
2026-03-05 10:36 ` Javier Martinez Canillas
2026-03-07 23:27   ` David Lechner
2026-03-09  9:25     ` Javier Martinez Canillas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®