* [PATCH 1/3] arm64: dts: ti: k3-j721e-evm: Add overlay for PCIe NTB functionality
2025-02-02 9:36 [PATCH 0/3] PCIe NTB and USB Overlays for J721E, J742S2 and J784S4 Siddharth Vadapalli
@ 2025-02-02 9:36 ` Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 3/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay to enable USB0 Type-A Siddharth Vadapalli
2 siblings, 0 replies; 6+ messages in thread
From: Siddharth Vadapalli @ 2025-02-02 9:36 UTC (permalink / raw)
To: nm, vigneshr, kristo, robh, krzk+dt, conor+dt
Cc: devicetree, linux-kernel, linux-arm-kernel, srk, s-vadapalli
PCIe NTB (Non-Transparent-Bridge) allows connecting the memory of
multiple PCIe Hosts (Root-Complex). The number of such hosts is
determined by the number of PCIe instances configured for NTB operation
on the device which intends to enable NTB functionality. Add a device-tree
overlay to configure PCIE0 and PCIE1 instances of PCIe on J721E EVM for NTB
operation. This shall allow connecting the memory of two PCIe Hosts via
PCIE0 and PCIE1 on J721E EVM.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 4 +
.../boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso | 91 +++++++++++++++++++
2 files changed, 95 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8a4bdf87e2d4..1097ab30f5a9 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie-ntb.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
@@ -201,6 +202,8 @@ k3-j7200-evm-pcie1-ep-dtbs := k3-j7200-common-proc-board.dtb \
k3-j7200-evm-pcie1-ep.dtbo
k3-j721e-common-proc-board-infotainment-dtbs := k3-j721e-common-proc-board.dtb \
k3-j721e-common-proc-board-infotainment.dtbo
+k3-j721e-evm-pcie-ntb-dtbs := k3-j721e-common-proc-board.dtb \
+ k3-j721e-evm-pcie-ntb.dtbo
k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
k3-j721e-evm-pcie0-ep.dtbo
k3-j721e-evm-pcie1-ep-dtbs := k3-j721e-common-proc-board.dtb \
@@ -239,6 +242,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am69-sk-pcie0-ep.dtb \
k3-j7200-evm-pcie1-ep.dtb \
k3-j721e-common-proc-board-infotainment.dtb \
+ k3-j721e-evm-pcie-ntb.dtb \
k3-j721e-evm-pcie0-ep.dtb \
k3-j721e-evm-pcie1-ep.dtb \
k3-j721e-sk-csi2-dual-imx219.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso
new file mode 100644
index 000000000000..4601bc8cd52f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling NTB functionality using PCIE0 and PCIE1 instances of
+ * PCIe on the J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+ epf_bus {
+ compatible = "pci-epf-bus";
+
+ ntb {
+ compatible = "pci-epf-ntb";
+ epcs = <&pcie0_ep>, <&pcie1_ep>;
+ epc-names = "primary", "secondary";
+ vendor-id = /bits/ 16 <0x104c>;
+ device-id = /bits/ 16 <0xb00d>;
+ num-mws = <4>;
+ mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>;
+ };
+ };
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie1_rc {
+ status = "disabled";
+};
+
+&cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ pcie0_ep: pcie-ep@2900000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+ };
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 1>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes1_pcie_link>;
+ phy-names = "pcie-phy";
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+ };
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB
2025-02-02 9:36 [PATCH 0/3] PCIe NTB and USB Overlays for J721E, J742S2 and J784S4 Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 1/3] arm64: dts: ti: k3-j721e-evm: Add overlay for PCIe NTB functionality Siddharth Vadapalli
@ 2025-02-02 9:36 ` Siddharth Vadapalli
2025-02-24 12:05 ` Vignesh Raghavendra
2025-02-02 9:36 ` [PATCH 3/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay to enable USB0 Type-A Siddharth Vadapalli
2 siblings, 1 reply; 6+ messages in thread
From: Siddharth Vadapalli @ 2025-02-02 9:36 UTC (permalink / raw)
To: nm, vigneshr, kristo, robh, krzk+dt, conor+dt
Cc: devicetree, linux-kernel, linux-arm-kernel, srk, s-vadapalli
PCIe NTB (Non-Transparent-Bridge) allows connecting the memory of
multiple PCIe Hosts (Root-Complex). The number of such hosts is
determined by the number of PCIe instances configured for NTB operation
on the device which intends to enable NTB functionality. Add a device-tree
overlay to configure PCIE0 and PCIE1 instances of PCIe on either J784S4 EVM
or J742S2 EVM for NTB operation. This shall allow connecting the memory of
two PCIe Hosts via PCIE0 and PCIE1 on J784S4 EVM or J742S2 EVM
respectively.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 7 ++
.../dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso | 92 +++++++++++++++++++
2 files changed, 99 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 1097ab30f5a9..dbeb5d7401f7 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -128,6 +128,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-pcie-ntb.dtbo
# Boards with J742S2 SoC
dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
@@ -212,6 +213,10 @@ k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
k3-j721e-sk-csi2-dual-imx219.dtbo
k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
k3-j721s2-evm-pcie1-ep.dtbo
+k3-j742s2-evm-pcie-ntb-dtbs := k3-j742s2-evm.dtb \
+ k3-j784s4-j742s2-evm-pcie-ntb.dtbo
+k3-j784s4-evm-pcie-ntb-dtbs := k3-j784s4-evm.dtb \
+ k3-j784s4-j742s2-evm-pcie-ntb.dtbo
k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-evm-pcie0-pcie1-ep.dtbo
k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
@@ -247,6 +252,8 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-j721e-evm-pcie1-ep.dtb \
k3-j721e-sk-csi2-dual-imx219.dtb \
k3-j721s2-evm-pcie1-ep.dtb \
+ k3-j742s2-evm-pcie-ntb.dtb \
+ k3-j784s4-evm-pcie-ntb.dtb \
k3-j784s4-evm-pcie0-pcie1-ep.dtb \
k3-j784s4-evm-quad-port-eth-exp1.dtb \
k3-j784s4-evm-usxgmii-exp1-exp2.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
new file mode 100644
index 000000000000..e44173f670fa
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling NTB functionality using PCIE0 and PCIE1 instances of
+ * PCIe on the J784S4 EVM and the J742S2 EVM.
+ *
+ * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
+ * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+ epf_bus {
+ compatible = "pci-epf-bus";
+
+ ntb {
+ compatible = "pci-epf-ntb";
+ epcs = <&pcie0_ep>, <&pcie1_ep>;
+ epc-names = "primary", "secondary";
+ vendor-id = /bits/ 16 <0x104c>;
+ device-id = /bits/ 16 <0xb012>;
+ num-mws = <4>;
+ mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>;
+ };
+ };
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie1_rc {
+ status = "disabled";
+};
+
+&cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ pcie0_ep: pcie-ep@2900000 {
+ compatible = "ti,j784s4-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 332 0>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes1_pcie0_link>;
+ phy-names = "pcie-phy";
+ };
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j784s4-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 333 0>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes0_pcie1_link>;
+ phy-names = "pcie-phy";
+ };
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB
2025-02-02 9:36 ` [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB Siddharth Vadapalli
@ 2025-02-24 12:05 ` Vignesh Raghavendra
2025-02-24 12:11 ` Siddharth Vadapalli
0 siblings, 1 reply; 6+ messages in thread
From: Vignesh Raghavendra @ 2025-02-24 12:05 UTC (permalink / raw)
To: Siddharth Vadapalli, nm, kristo, robh, krzk+dt, conor+dt
Cc: devicetree, linux-kernel, linux-arm-kernel, srk
On 02/02/25 15:06, Siddharth Vadapalli wrote:
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
> new file mode 100644
> index 000000000000..e44173f670fa
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/**
> + * DT Overlay for enabling NTB functionality using PCIE0 and PCIE1 instances of
> + * PCIe on the J784S4 EVM and the J742S2 EVM.
> + *
> + * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
> + * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
> + *
> + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> + epf_bus {
no underscore in node name please
> + compatible = "pci-epf-bus";
> +
> + ntb {
> + compatible = "pci-epf-ntb";
> + epcs = <&pcie0_ep>, <&pcie1_ep>;
> + epc-names = "primary", "secondary";
> + vendor-id = /bits/ 16 <0x104c>;
> + device-id = /bits/ 16 <0xb012>;
> + num-mws = <4>;
> + mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>;
> + };
> + };
> +};
> +
--
Regards
Vignesh
https://ti.com/opensource
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB
2025-02-24 12:05 ` Vignesh Raghavendra
@ 2025-02-24 12:11 ` Siddharth Vadapalli
0 siblings, 0 replies; 6+ messages in thread
From: Siddharth Vadapalli @ 2025-02-24 12:11 UTC (permalink / raw)
To: Vignesh Raghavendra
Cc: Siddharth Vadapalli, nm, kristo, robh, krzk+dt, conor+dt,
devicetree, linux-kernel, linux-arm-kernel, srk
On Mon, Feb 24, 2025 at 05:35:47PM +0530, Vignesh Raghavendra wrote:
Hello Vignesh,
>
>
> On 02/02/25 15:06, Siddharth Vadapalli wrote:
> > diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
> > new file mode 100644
> > index 000000000000..e44173f670fa
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-pcie-ntb.dtso
> > @@ -0,0 +1,92 @@
> > +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> > +/**
> > + * DT Overlay for enabling NTB functionality using PCIE0 and PCIE1 instances of
> > + * PCIe on the J784S4 EVM and the J742S2 EVM.
> > + *
> > + * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
> > + * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
> > + *
> > + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> > +
> > +#include "k3-pinctrl.h"
> > +
> > +&{/} {
> > + epf_bus {
>
>
> no underscore in node name please
Thank you for pointing this out. I will fix it in this as well as the
previous patch in this series and post the v2 series.
Regards,
Siddharth.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay to enable USB0 Type-A
2025-02-02 9:36 [PATCH 0/3] PCIe NTB and USB Overlays for J721E, J742S2 and J784S4 Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 1/3] arm64: dts: ti: k3-j721e-evm: Add overlay for PCIe NTB functionality Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB Siddharth Vadapalli
@ 2025-02-02 9:36 ` Siddharth Vadapalli
2 siblings, 0 replies; 6+ messages in thread
From: Siddharth Vadapalli @ 2025-02-02 9:36 UTC (permalink / raw)
To: nm, vigneshr, kristo, robh, krzk+dt, conor+dt
Cc: devicetree, linux-kernel, linux-arm-kernel, srk, s-vadapalli
The USB0 instance of the USB controller on both the J742S2 EVM and the
J784S4 EVM supports a single USB interface at a time among the following:
1. USB3.1 Gen1 Type C interface
2. Two USB2.0 Type A interfaces via an on-board USB Hub.
By default, the USB3.1 Gen1 Type C interface is supported on both of the
EVMs. Enable the USB2.0 Type A interface by configuring the USB2.0_MUX_SEL
mux. Additionally, set the Dual-Role Mode to Host since a Type-A interface
is only associated with the Host Mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 9 +++++-
.../ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso | 29 +++++++++++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index dbeb5d7401f7..019517c258ec 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-pcie-ntb.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-usb0-type-a.dtbo
# Boards with J742S2 SoC
dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
@@ -215,6 +216,8 @@ k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
k3-j721s2-evm-pcie1-ep.dtbo
k3-j742s2-evm-pcie-ntb-dtbs := k3-j742s2-evm.dtb \
k3-j784s4-j742s2-evm-pcie-ntb.dtbo
+k3-j742s2-evm-usb0-type-a-dtbs := k3-j742s2-evm.dtb \
+ k3-j784s4-j742s2-evm-usb0-type-a.dtbo
k3-j784s4-evm-pcie-ntb-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-j742s2-evm-pcie-ntb.dtbo
k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \
@@ -223,6 +226,8 @@ k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-evm-quad-port-eth-exp1.dtbo
k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+k3-j784s4-evm-usb0-type-a-dtbs := k3-j784s4-evm.dtb \
+ k3-j784s4-j742s2-evm-usb0-type-a.dtbo
dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
k3-am625-sk-csi2-imx219.dtb \
@@ -253,10 +258,12 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-j721e-sk-csi2-dual-imx219.dtb \
k3-j721s2-evm-pcie1-ep.dtb \
k3-j742s2-evm-pcie-ntb.dtb \
+ k3-j742s2-evm-usb0-type-a.dtb \
k3-j784s4-evm-pcie-ntb.dtb \
k3-j784s4-evm-pcie0-pcie1-ep.dtb \
k3-j784s4-evm-quad-port-eth-exp1.dtb \
- k3-j784s4-evm-usxgmii-exp1-exp2.dtb
+ k3-j784s4-evm-usxgmii-exp1-exp2.dtb \
+ k3-j784s4-evm-usb0-type-a.dtb
# Enable support for device-tree overlays
DTC_FLAGS_k3-am625-beagleplay += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
new file mode 100644
index 000000000000..ba15d72d86d6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB on J784S4 and J742S2 EVMs for
+ * Host Mode of operation with the Type-A Connector.
+ *
+ * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
+ * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp2 {
+ p12-hog {
+ /* P12 - USB2.0_MUX_SEL */
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "USB2.0_MUX_SEL";
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread