mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Imre Kaloz <kaloz@kernel.org>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 19/38] MIPS: ip27_defconfig: enable the IOC3 MFD, its cell drivers and tg3
Date: Thu,  1 Oct 2026 18:11:54 +0200	[thread overview]
Message-ID: <e4ca88a052ae97445fb4fafc5e535adf26a27eab.1790857966.git.kaloz@kernel.org> (raw)
In-Reply-To: <cover.1790857966.git.kaloz@kernel.org>

CONFIG_SGI_MFD_IOC3 was unset, leaving the MFD core out of the built
kernel and the existing CONFIG_SGI_IOC3_ETH=y line unsatisfiable, since
that driver depends on it. Enable it with the 8250 and PS/2 cell
drivers, and enable tg3, which drives the Tezro's Gigabit Ethernet.

Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip")
Signed-off-by: Imre Kaloz <kaloz@kernel.org>
---
 arch/mips/configs/ip27_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index ac885ff5b712..73abeb534550 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -140,6 +140,7 @@ CONFIG_ATL2=m
 CONFIG_ATL1E=m
 CONFIG_ATL1C=m
 CONFIG_B44=m
+CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_ENIC=m
 CONFIG_BE2NET=m
@@ -219,6 +220,7 @@ CONFIG_RTL8180=m
 CONFIG_WL1251=m
 CONFIG_WL12XX=m
 # CONFIG_INPUT is not set
+CONFIG_SERIO_SGI_IOC3=m
 CONFIG_SERIO_LIBPS2=m
 CONFIG_SERIO_RAW=m
 CONFIG_SERIO_ALTERA_PS2=m
@@ -229,6 +231,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_IOC3=y
 CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_ALI1535=m
@@ -260,6 +263,7 @@ CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_SGI_MFD_IOC3=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_M48T35=y
 CONFIG_UIO=y
-- 
2.47.3


  parent reply	other threads:[~2026-10-01 16:13 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-01 16:11 [PATCH 00/38] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines Imre Kaloz
2026-10-01 16:11 ` [PATCH 01/38] MIPS: Xtalk: guard the widget identification table from assembly Imre Kaloz
2026-10-01 16:11 ` [PATCH 02/38] MIPS: SGI-IP27: dump the NMI save areas the CPU scan recorded Imre Kaloz
2026-10-01 16:11 ` [PATCH 03/38] MIPS: SGI-IP27: add REMOTE_HUB_PI_S()/REMOTE_HUB_PI_L() Imre Kaloz
2026-10-01 16:11 ` [PATCH 04/38] MIPS: SGI-IP27: detect Bedrock hubs at boot Imre Kaloz
2026-10-01 16:11 ` [PATCH 05/38] MIPS: SGI-IP27: widen Kconfig for the Bedrock-based machines Imre Kaloz
2026-10-01 16:11 ` [PATCH 06/38] MIPS: SGI-IP27: fold the dead SN1 arm out of klconfig.h Imre Kaloz
2026-10-01 16:11 ` [PATCH 07/38] MIPS: SGI-IP27: choose the node address layout at runtime Imre Kaloz
2026-10-01 16:11 ` [PATCH 08/38] MIPS: SGI-IP27: add the Bedrock hub register windows Imre Kaloz
2026-10-01 16:11 ` [PATCH 09/38] MIPS: SGI-IP27: decode a Bedrock hub's node id and system size Imre Kaloz
2026-10-01 16:11 ` [PATCH 10/38] MIPS: SGI-IP27: put a Bedrock hub's boot CPU in slot 0 Imre Kaloz
2026-10-01 16:11 ` [PATCH 11/38] MIPS: SGI-IP27: lay out node memory in 1GB banks on Bedrock hubs Imre Kaloz
2026-10-01 16:11 ` [PATCH 12/38] MIPS: SGI-IP27: reserve the bottom 64MB of node 0 " Imre Kaloz
2026-10-01 16:11 ` [PATCH 13/38] MIPS: SGI-IP27: route interrupt masks and slices through both PIs Imre Kaloz
2026-10-01 16:11 ` [PATCH 14/38] MIPS: SGI-IP27: address a CPU's own PI for NMI, IPI and RT counter Imre Kaloz
2026-10-01 16:11 ` [PATCH 15/38] MIPS: SGI-IP27: take a CPU's node from the CPU table in per_cpu_init() Imre Kaloz
2026-10-01 16:11 ` [PATCH 16/38] MIPS: SGI-IP27: resolve the mapped-kernel node shift at runtime Imre Kaloz
2026-10-01 16:11 ` [PATCH 17/38] MIPS: SGI-IP27: load the kernel at node offset 0x40000 Imre Kaloz
2026-10-01 16:11 ` [PATCH 18/38] MIPS: SGI-IP27: xbow_probe(): recognize KLTYPE_PBRICK_XBOW Imre Kaloz
2026-10-01 16:11 ` Imre Kaloz [this message]
2026-10-01 16:11 ` [PATCH 20/38] net: ethernet: sgi: ioc3-eth: apply the DMA attributes only to 64-bit addresses Imre Kaloz
2026-10-01 16:11 ` [PATCH 21/38] MIPS: SGI-IP27: route XBridge and PIC DMA through the 32-bit window Imre Kaloz
2026-10-05  8:39   ` Christoph Hellwig
2026-10-05 13:15     ` Imre Kaloz
2026-10-01 16:11 ` [PATCH 22/38] MIPS: SGI-IP27: recognize the PXBow crossbar Imre Kaloz
2026-10-01 16:11 ` [PATCH 23/38] MIPS: PCI: xtalk-bridge: recognize the PIC widget's 64-bit-only registers Imre Kaloz
2026-10-01 16:11 ` [PATCH 24/38] MIPS: PCI: xtalk-bridge: match PIC's register-level differences Imre Kaloz
2026-10-01 16:12 ` [PATCH 25/38] rtc: m48t35: support the SGI IP35 timekeeper's 1968 year base Imre Kaloz
2026-10-01 16:12 ` [PATCH 26/38] mfd: ioc3: add support for IOC4 Imre Kaloz
2026-10-01 16:12 ` [PATCH 27/38] MIPS: SGI-IP27: dispatch the early console between IOC3 and IOC4 Imre Kaloz
2026-10-01 16:12 ` [PATCH 28/38] MIPS: SGI-IP27: add L1 system controller support Imre Kaloz
2026-10-01 16:12 ` [PATCH 29/38] MIPS: SGI-IP27: wire the L1 into reset and the Ethernet address Imre Kaloz
2026-10-01 16:12 ` [PATCH 30/38] MIPS: PCI: xtalk-bridge: take the board part number from the L1 Imre Kaloz
2026-10-01 16:12 ` [PATCH 31/38] mfd: ioc3: add IP34 system-board entry to ioc3_infos[] Imre Kaloz
2026-10-02 10:02   ` Lee Jones
2026-10-02 10:29     ` Imre Kaloz
2026-10-01 16:12 ` [PATCH 32/38] net: ethernet: sgi: ioc3-eth: fall back to the platform MAC address Imre Kaloz
2026-10-01 16:12 ` [PATCH 33/38] MIPS: SGI-IP27: don't register a w1 master on an XBridge or PIC Imre Kaloz
2026-10-01 16:12 ` [PATCH 34/38] MIPS: SGI-IP27: report a Bedrock machine as SGI IP35 Imre Kaloz
2026-10-01 16:12 ` [PATCH 35/38] MIPS: SGI-IP27: identify the machine by the L1 brick type Imre Kaloz
2026-10-01 16:12 ` [PATCH 36/38] MIPS: SGI-IP27: register the Odyssey graphics widget Imre Kaloz
2026-10-01 16:12 ` [PATCH 37/38] MIPS: SGI-IP27: take the console from the KLCONFIG header on IP35 Imre Kaloz
2026-10-01 16:12 ` [PATCH 38/38] MIPS: SGI-IP27: give each CPU its own topology package id Imre Kaloz
2026-10-02 15:46 ` [PATCH 00/38] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines Thomas Bogendoerfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e4ca88a052ae97445fb4fafc5e535adf26a27eab.1790857966.git.kaloz@kernel.org \
    --to=kaloz@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®