From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org,
Michael Hennerich <michael.hennerich@analog.com>
Subject: [PATCH 39/72] Blackfin: convert boards to use platform data with smc91x
Date: Mon, 14 Sep 2009 16:07:43 -0400 [thread overview]
Message-ID: <1252958896-25150-40-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1252958896-25150-1-git-send-email-vapier@gentoo.org>
From: Michael Hennerich <michael.hennerich@analog.com>
Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/mach-bf527/boards/cm_bf527.c | 11 +++++++++++
arch/blackfin/mach-bf527/boards/ezkit.c | 11 +++++++++++
arch/blackfin/mach-bf533/boards/H8606.c | 11 +++++++++++
arch/blackfin/mach-bf533/boards/blackstamp.c | 11 +++++++++++
arch/blackfin/mach-bf533/boards/cm_bf533.c | 11 +++++++++++
arch/blackfin/mach-bf533/boards/ezkit.c | 11 +++++++++++
arch/blackfin/mach-bf533/boards/stamp.c | 11 +++++++++++
arch/blackfin/mach-bf537/boards/cm_bf537.c | 11 +++++++++++
arch/blackfin/mach-bf537/boards/pnav10.c | 11 +++++++++++
arch/blackfin/mach-bf537/boards/stamp.c | 11 +++++++++++
arch/blackfin/mach-bf537/boards/tcm_bf537.c | 11 +++++++++++
arch/blackfin/mach-bf538/boards/ezkit.c | 11 +++++++++++
arch/blackfin/mach-bf561/boards/cm_bf561.c | 10 ++++++++++
arch/blackfin/mach-bf561/boards/ezkit.c | 11 +++++++++++
14 files changed, 153 insertions(+), 0 deletions(-)
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 85f9ac5..cb360e9 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -275,6 +275,14 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -293,6 +301,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index b843d0e..617a287 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -292,6 +292,14 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -310,6 +318,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 38cf8ff..1bd8b61 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -88,6 +88,14 @@ static struct platform_device dm9000_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 9ecdc36..8208d67 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -48,6 +48,14 @@ static struct platform_device rtc_device = {
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -66,6 +74,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1443e92..7052568 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -195,6 +195,14 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.start = 0x20200300,
@@ -211,6 +219,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 4e3e511..88b2dfc 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -67,6 +67,14 @@ static struct platform_device bfin_fb_adv7393_device = {
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -84,6 +92,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 7a7b656..f3dc283 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -63,6 +63,14 @@ static struct platform_device rtc_device = {
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -81,6 +89,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 2a87d1c..3681d2c 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -223,6 +223,14 @@ static struct platform_device hitachi_fb_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.start = 0x20200300,
@@ -240,6 +248,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 838240f..3bbe102 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -92,6 +92,14 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 192e34e..313249e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -171,6 +171,14 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -189,6 +197,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index e523e6e..97a86b4 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -223,6 +223,14 @@ static struct platform_device hitachi_fb_device = {
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.start = 0x20200300,
@@ -240,6 +248,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 57695b4..42297fa 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -177,6 +177,14 @@ static struct platform_device bfin_sir2_device = {
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -194,6 +202,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 0c9d72c..ebb0755 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -213,6 +213,13 @@ static struct platform_device hitachi_fb_device = {
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
static struct resource smc91x_resources[] = {
{
@@ -231,6 +238,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 4df904f..10edc99 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -147,6 +147,14 @@ static struct platform_device net2272_bfin_device = {
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
{
.name = "smc91x-regs",
@@ -166,6 +174,9 @@ static struct platform_device smc91x_device = {
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
#endif
--
1.6.4.2
next prev parent reply other threads:[~2009-09-14 20:08 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-14 20:07 [PATCH 00/72] Blackfin updates for 2.6.32 Mike Frysinger
2009-09-14 20:07 ` [PATCH 01/72] Blackfin: bf537-stamp: update ADP5588 header name Mike Frysinger
2009-09-14 20:07 ` [PATCH 02/72] Blackfin: bf537-stamp: declare SPI IRQ resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 03/72] Blackfin: bf537-stamp: add resources for AD1938 audio card Mike Frysinger
2009-09-14 20:07 ` [PATCH 04/72] Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4] Mike Frysinger
2009-09-14 20:07 ` [PATCH 05/72] Blackfin: checkpatch --file arch/blackfin/kernel/ipipe.c Mike Frysinger
2009-09-14 20:07 ` [PATCH 06/72] Blackfin: fix misnomer of some I-pipe helpers Mike Frysinger
2009-09-14 20:07 ` [PATCH 07/72] Blackfin: export show_stack() to modules Mike Frysinger
2009-09-14 20:07 ` [PATCH 08/72] Blackfin: allow high priority domains to preempt schedule_tail() Mike Frysinger
2009-09-14 20:07 ` [PATCH 09/72] Blackfin: use generic name for EVT14 handler Mike Frysinger
2009-09-14 20:07 ` [PATCH 10/72] Blackfin: reuse evt_evt14 handler to perform irqtail epilogue Mike Frysinger
2009-09-14 20:07 ` [PATCH 11/72] Blackfin: allow EVT5 to preempt irqtail prologue (CONFIG_DEBUG_HWERR) Mike Frysinger
2009-09-14 20:07 ` [PATCH 12/72] Blackfin: document __ipipe_call_irqtail Mike Frysinger
2009-09-14 20:07 ` [PATCH 13/72] Blackfin: sanitize manual control of IPEND[4] Mike Frysinger
2009-09-14 20:07 ` [PATCH 14/72] Blackfin: inline I-pipe bypass code in ret_from_exception Mike Frysinger
2009-09-14 20:07 ` [PATCH 15/72] Blackfin: cleanup traps decode_address() a bit Mike Frysinger
2009-09-14 20:07 ` [PATCH 16/72] Blackfin: convert ptrace to new memory functions Mike Frysinger
2009-09-14 20:07 ` [PATCH 17/72] Blackfin: reject outdated/unused/wrong relocation types Mike Frysinger
2009-09-14 20:07 ` [PATCH 18/72] Blackfin: cleanup printk() usage in module code Mike Frysinger
2009-09-14 20:07 ` [PATCH 19/72] Blackfin: convert malloc()/memset() to zalloc() " Mike Frysinger
2009-09-14 20:07 ` [PATCH 20/72] Blackfin: cleanup module section checking Mike Frysinger
2009-09-14 20:07 ` [PATCH 21/72] Blackfin: fix module reloc handling for all memory regions Mike Frysinger
2009-09-14 20:07 ` [PATCH 22/72] Blackfin: clean up early memory setup code Mike Frysinger
2009-09-14 20:07 ` [PATCH 23/72] Blackfin: rename PCF8574 driver config Mike Frysinger
2009-09-14 20:07 ` [PATCH 24/72] Blackfin: unify duplicated SMP checks in L2 cache kconfig Mike Frysinger
2009-09-14 20:07 ` [PATCH 25/72] Blackfin: push SRAM locks down into related ifdefs Mike Frysinger
2009-09-14 20:07 ` [PATCH 26/72] Blackfin: add support for common FDPIC ptrace requests Mike Frysinger
2009-09-14 20:07 ` [PATCH 27/72] Blackfin: add an early shadow console Mike Frysinger
2009-09-14 20:07 ` [PATCH 28/72] Blackfin: catch hardware errors earlier during booting Mike Frysinger
2009-09-14 20:07 ` [PATCH 29/72] Blackfin: fix BF548 UART0 DMA IRQ translation Mike Frysinger
2009-09-14 20:07 ` [PATCH 30/72] Blackfin: bf538: add bfin_clear_PPI_STATUS() helper Mike Frysinger
2009-09-14 20:07 ` [PATCH 31/72] Blackfin: bf533-stamp: add resources for mmc_spi card Mike Frysinger
2009-09-14 20:07 ` [PATCH 32/72] Blackfin: do not try displaying the end of the stack Mike Frysinger
2009-09-14 20:07 ` [PATCH 33/72] Blackfin: bf537-stamp: update AD714x resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 34/72] Blackfin: clean up duplicate I2C device type definitions Mike Frysinger
2009-09-14 20:07 ` [PATCH 35/72] Blackfin: fix MPU handling of invalid memory accesses Mike Frysinger
2009-09-14 20:07 ` [PATCH 36/72] Blackfin: bf533-stamp: fix typo in SPI frequency for ad1836 codec Mike Frysinger
2009-09-14 20:07 ` [PATCH 37/72] Blackfin: improve double fault debug handling Mike Frysinger
2009-09-14 20:07 ` [PATCH 38/72] Blackfin: bf537-stamp: drop ATA interrupt probe workaround Mike Frysinger
2009-09-14 20:07 ` Mike Frysinger [this message]
2009-09-14 20:07 ` [PATCH 40/72] Blackfin: drop unused MMR defines that only cause bad code to be written Mike Frysinger
2009-09-14 20:07 ` [PATCH 41/72] Blackfin: cm-bf527/bf537-stamp: fix dm9000 resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 42/72] Blackfin: bf548-ezkit: fix incorrect LCD size parameters Mike Frysinger
2009-09-14 20:07 ` [PATCH 43/72] Blackfin: fix read buffer overflow Mike Frysinger
2009-09-14 20:07 ` [PATCH 44/72] Blackfin: bf538-ezkit: add resources for parallel flash Mike Frysinger
2009-09-14 20:07 ` [PATCH 45/72] Blackfin: update anomaly lists Mike Frysinger
2009-09-14 20:07 ` [PATCH 46/72] Blackfin: bf537-stamp: update ad1836 resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 47/72] Blackfin: cleanup sync handling when enabling/disabling cplbs Mike Frysinger
2009-09-14 20:07 ` [PATCH 48/72] Blackfin: SMP port does not yet support cpu frequency scaling Mike Frysinger
2009-09-14 20:07 ` [PATCH 49/72] Blackfin: fix BF522/BF523 max VCO mixup Mike Frysinger
2009-09-14 20:07 ` [PATCH 50/72] Blackfin: do not trace the exception handler Mike Frysinger
2009-09-14 20:07 ` [PATCH 51/72] Blackfin: drop board resources for dead devices (pbx/ad9960) Mike Frysinger
2009-09-14 20:07 ` [PATCH 52/72] Blackfin: punt dead cache locking code Mike Frysinger
2009-09-14 20:07 ` [PATCH 53/72] Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name Mike Frysinger
2009-09-14 20:07 ` [PATCH 54/72] Blackfin: optimize fixed code handling for the most common case Mike Frysinger
2009-09-14 20:07 ` [PATCH 55/72] Blackfin: handle the core timer interrupt with handle_percpu_irq on SMP Mike Frysinger
2009-09-14 20:08 ` [PATCH 56/72] Blackfin: Fix link errors with binutils 2.19 and GCC 4.3 Mike Frysinger
2009-09-14 20:08 ` [PATCH 57/72] Blackfin: remove useless duplicated assignment in gpio code Mike Frysinger
2009-09-14 20:08 ` [PATCH 58/72] Blackfin: use raw_smp_processor_id() in exception code Mike Frysinger
2009-09-14 20:08 ` [PATCH 59/72] Blackfin: fix spelling in a few comments Mike Frysinger
2009-09-14 20:08 ` [PATCH 60/72] Blackfin: workaround anomaly 05000283 Mike Frysinger
2009-09-14 20:08 ` [PATCH 61/72] Blackfin: add some isram-driver self tests Mike Frysinger
2009-09-14 20:08 ` [PATCH 62/72] Blackfin: bf537-stamp: add adp5588 gpio resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 63/72] Blackfin: fix typo in isram_write() Mike Frysinger
2009-09-14 20:08 ` [PATCH 64/72] Blackfin: fix BF54x SPI CS resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 65/72] Blackfin: use KERN_ALERT in all kgdb_test output Mike Frysinger
2009-09-14 20:08 ` [PATCH 66/72] Blackfin: add ICPLB coverage for async banks Mike Frysinger
2009-09-14 20:08 ` [PATCH 67/72] Blackfin: increase default async timings for parallel flashes Mike Frysinger
2009-09-14 20:08 ` [PATCH 68/72] Blackfin: bf538-ezkit: add SPI IRQ resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 69/72] Blackfin: cm-bf537u: split board from cm-bf537e Mike Frysinger
2009-09-14 20:08 ` [PATCH 70/72] Blackfin: update cm board resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 71/72] Blackfin: update ftrace_push_return_trace() breakage Mike Frysinger
2009-09-14 20:08 ` [PATCH 72/72] Blackfin: swap clocksource ratings for gptimer/cycles Mike Frysinger
2009-09-14 20:50 ` [PATCH 00/72] Blackfin updates for 2.6.32 Daniel Walker
2009-09-14 20:57 ` Mike Frysinger
2009-09-14 21:04 ` Daniel Walker
2009-09-14 21:07 ` Mike Frysinger
2009-09-14 21:21 ` Daniel Walker
2009-09-14 22:17 ` Mike Frysinger
2009-09-14 22:36 ` Daniel Walker
2009-09-16 2:54 ` Mike Frysinger
2009-09-16 2:56 ` Mike Frysinger
2009-09-16 3:06 ` Daniel Walker
2009-09-16 3:21 ` Mike Frysinger
2009-09-16 3:59 ` Daniel Walker
2009-09-16 4:13 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1252958896-25150-40-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®