From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Subject: [PATCH 61/72] Blackfin: add some isram-driver self tests
Date: Mon, 14 Sep 2009 16:08:05 -0400 [thread overview]
Message-ID: <1252958896-25150-62-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1252958896-25150-1-git-send-email-vapier@gentoo.org>
Make it easy to figure out if code changes here are correct.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/Kconfig.debug | 6 +
arch/blackfin/mm/isram-driver.c | 212 ++++++++++++++++++++++++++++++++++++++-
2 files changed, 216 insertions(+), 2 deletions(-)
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 1fc4981..87f195e 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -252,4 +252,10 @@ config ACCESS_CHECK
Say N here to disable that check to improve the performance.
+config BFIN_ISRAM_SELF_TEST
+ bool "isram boot self tests"
+ default n
+ help
+ Run some self tests of the isram driver code at boot.
+
endmenu
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index c080e70..02eaaa6 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -16,6 +16,8 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#define pr_fmt(fmt) "isram: " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
@@ -23,6 +25,7 @@
#include <linux/sched.h>
#include <asm/blackfin.h>
+#include <asm/dma.h>
/*
* IMPORTANT WARNING ABOUT THESE FUNCTIONS
@@ -127,8 +130,7 @@ static bool isram_check_addr(const void *addr, size_t n)
(addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
show_stack(NULL, NULL);
- printk(KERN_ERR "isram_memcpy: copy involving %p length "
- "(%zu) too long\n", addr, n);
+ pr_err("copy involving %p length (%zu) too long\n", addr, n);
}
return true;
}
@@ -199,3 +201,209 @@ void *isram_memcpy(void *dest, const void *src, size_t n)
}
EXPORT_SYMBOL(isram_memcpy);
+#ifdef CONFIG_BFIN_ISRAM_SELF_TEST
+
+#define TEST_LEN 0x100
+
+static __init void hex_dump(unsigned char *buf, int len)
+{
+ while (len--)
+ pr_cont("%02x", *buf++);
+}
+
+static __init int isram_read_test(char *sdram, void *l1inst)
+{
+ int i, ret = 0;
+ uint64_t data1, data2;
+
+ pr_info("INFO: running isram_read tests\n");
+
+ /* setup some different data to play with */
+ for (i = 0; i < TEST_LEN; ++i)
+ sdram[i] = i;
+ dma_memcpy(l1inst, sdram, TEST_LEN);
+
+ /* make sure we can read the L1 inst */
+ for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+ data1 = isram_read(l1inst + i);
+ memcpy(&data2, sdram + i, sizeof(data2));
+ if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+ pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
+ l1inst + i, data1, data2);
+ ++ret;
+ }
+ }
+
+ return ret;
+}
+
+static __init int isram_write_test(char *sdram, void *l1inst)
+{
+ int i, ret = 0;
+ uint64_t data1, data2;
+
+ pr_info("INFO: running isram_write tests\n");
+
+ /* setup some different data to play with */
+ memset(sdram, 0, TEST_LEN * 2);
+ dma_memcpy(l1inst, sdram, TEST_LEN);
+ for (i = 0; i < TEST_LEN; ++i)
+ sdram[i] = i;
+
+ /* make sure we can write the L1 inst */
+ for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+ memcpy(&data1, sdram + i, sizeof(data1));
+ isram_write(l1inst + i, data1);
+ data2 = isram_read(l1inst + i);
+ if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+ pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
+ l1inst + i, data1, data2);
+ ++ret;
+ }
+ }
+
+ dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
+ if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+ pr_err("FAIL: isram_write() did not work properly\n");
+ ++ret;
+ }
+
+ return ret;
+}
+
+static __init int
+_isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
+ void *(*fmemcpy)(void *, const void *, size_t))
+{
+ memset(sdram, pattern, TEST_LEN);
+ fmemcpy(l1inst, sdram, TEST_LEN);
+ fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
+ if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+ pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
+ smemcpy, l1inst, sdram, TEST_LEN, pattern);
+ return 1;
+ }
+ return 0;
+}
+#define _isram_memcpy_test(a, b, c, d) _isram_memcpy_test(a, b, c, #d, d)
+
+static __init int isram_memcpy_test(char *sdram, void *l1inst)
+{
+ int i, j, thisret, ret = 0;
+
+ /* check broad isram_memcpy() */
+ pr_info("INFO: running broad isram_memcpy tests\n");
+ for (i = 0xf; i >= 0; --i)
+ ret += _isram_memcpy_test(i, sdram, l1inst, isram_memcpy);
+
+ /* check read of small, unaligned, and hardware 64bit limits */
+ pr_info("INFO: running isram_memcpy (read) tests\n");
+
+ for (i = 0; i < TEST_LEN; ++i)
+ sdram[i] = i;
+ dma_memcpy(l1inst, sdram, TEST_LEN);
+
+ thisret = 0;
+ for (i = 0; i < TEST_LEN - 32; ++i) {
+ unsigned char cmp[32];
+ for (j = 1; j <= 32; ++j) {
+ memset(cmp, 0, sizeof(cmp));
+ isram_memcpy(cmp, l1inst + i, j);
+ if (memcmp(cmp, sdram + i, j)) {
+ pr_err("FAIL: %p:", l1inst + 1);
+ hex_dump(cmp, j);
+ pr_cont(" SDRAM:");
+ hex_dump(sdram + i, j);
+ pr_cont("\n");
+ if (++thisret > 20) {
+ pr_err("FAIL: skipping remaining series\n");
+ i = TEST_LEN;
+ break;
+ }
+ }
+ }
+ }
+ ret += thisret;
+
+ /* check write of small, unaligned, and hardware 64bit limits */
+ pr_info("INFO: running isram_memcpy (write) tests\n");
+
+ memset(sdram + TEST_LEN, 0, TEST_LEN);
+ dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
+
+ thisret = 0;
+ for (i = 0; i < TEST_LEN - 32; ++i) {
+ unsigned char cmp[32];
+ for (j = 1; j <= 32; ++j) {
+ isram_memcpy(l1inst + i, sdram + i, j);
+ dma_memcpy(cmp, l1inst + i, j);
+ if (memcmp(cmp, sdram + i, j)) {
+ pr_err("FAIL: %p:", l1inst + i);
+ hex_dump(cmp, j);
+ pr_cont(" SDRAM:");
+ hex_dump(sdram + i, j);
+ pr_cont("\n");
+ if (++thisret > 20) {
+ pr_err("FAIL: skipping remaining series\n");
+ i = TEST_LEN;
+ break;
+ }
+ }
+ }
+ }
+ ret += thisret;
+
+ return ret;
+}
+
+static __init int isram_test_init(void)
+{
+ int ret;
+ char *sdram;
+ void *l1inst;
+
+ sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
+ if (!sdram) {
+ pr_warning("SKIP: could not allocate sdram\n");
+ return 0;
+ }
+
+ l1inst = l1_inst_sram_alloc(TEST_LEN);
+ if (!l1inst) {
+ kfree(sdram);
+ pr_warning("SKIP: could not allocate L1 inst\n");
+ return 0;
+ }
+
+ /* sanity check initial L1 inst state */
+ ret = 1;
+ pr_info("INFO: running initial dma_memcpy checks\n");
+ if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
+ goto abort;
+ if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
+ goto abort;
+
+ ret = 0;
+ ret += isram_read_test(sdram, l1inst);
+ ret += isram_write_test(sdram, l1inst);
+ ret += isram_memcpy_test(sdram, l1inst);
+
+ abort:
+ sram_free(l1inst);
+ kfree(sdram);
+
+ if (ret)
+ return -EIO;
+
+ pr_info("PASS: all tests worked !\n");
+ return 0;
+}
+late_initcall(isram_test_init);
+
+static __exit void isram_test_exit(void)
+{
+ /* stub to allow unloading */
+}
+module_exit(isram_test_exit);
+
+#endif
--
1.6.4.2
next prev parent reply other threads:[~2009-09-14 20:11 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-14 20:07 [PATCH 00/72] Blackfin updates for 2.6.32 Mike Frysinger
2009-09-14 20:07 ` [PATCH 01/72] Blackfin: bf537-stamp: update ADP5588 header name Mike Frysinger
2009-09-14 20:07 ` [PATCH 02/72] Blackfin: bf537-stamp: declare SPI IRQ resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 03/72] Blackfin: bf537-stamp: add resources for AD1938 audio card Mike Frysinger
2009-09-14 20:07 ` [PATCH 04/72] Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4] Mike Frysinger
2009-09-14 20:07 ` [PATCH 05/72] Blackfin: checkpatch --file arch/blackfin/kernel/ipipe.c Mike Frysinger
2009-09-14 20:07 ` [PATCH 06/72] Blackfin: fix misnomer of some I-pipe helpers Mike Frysinger
2009-09-14 20:07 ` [PATCH 07/72] Blackfin: export show_stack() to modules Mike Frysinger
2009-09-14 20:07 ` [PATCH 08/72] Blackfin: allow high priority domains to preempt schedule_tail() Mike Frysinger
2009-09-14 20:07 ` [PATCH 09/72] Blackfin: use generic name for EVT14 handler Mike Frysinger
2009-09-14 20:07 ` [PATCH 10/72] Blackfin: reuse evt_evt14 handler to perform irqtail epilogue Mike Frysinger
2009-09-14 20:07 ` [PATCH 11/72] Blackfin: allow EVT5 to preempt irqtail prologue (CONFIG_DEBUG_HWERR) Mike Frysinger
2009-09-14 20:07 ` [PATCH 12/72] Blackfin: document __ipipe_call_irqtail Mike Frysinger
2009-09-14 20:07 ` [PATCH 13/72] Blackfin: sanitize manual control of IPEND[4] Mike Frysinger
2009-09-14 20:07 ` [PATCH 14/72] Blackfin: inline I-pipe bypass code in ret_from_exception Mike Frysinger
2009-09-14 20:07 ` [PATCH 15/72] Blackfin: cleanup traps decode_address() a bit Mike Frysinger
2009-09-14 20:07 ` [PATCH 16/72] Blackfin: convert ptrace to new memory functions Mike Frysinger
2009-09-14 20:07 ` [PATCH 17/72] Blackfin: reject outdated/unused/wrong relocation types Mike Frysinger
2009-09-14 20:07 ` [PATCH 18/72] Blackfin: cleanup printk() usage in module code Mike Frysinger
2009-09-14 20:07 ` [PATCH 19/72] Blackfin: convert malloc()/memset() to zalloc() " Mike Frysinger
2009-09-14 20:07 ` [PATCH 20/72] Blackfin: cleanup module section checking Mike Frysinger
2009-09-14 20:07 ` [PATCH 21/72] Blackfin: fix module reloc handling for all memory regions Mike Frysinger
2009-09-14 20:07 ` [PATCH 22/72] Blackfin: clean up early memory setup code Mike Frysinger
2009-09-14 20:07 ` [PATCH 23/72] Blackfin: rename PCF8574 driver config Mike Frysinger
2009-09-14 20:07 ` [PATCH 24/72] Blackfin: unify duplicated SMP checks in L2 cache kconfig Mike Frysinger
2009-09-14 20:07 ` [PATCH 25/72] Blackfin: push SRAM locks down into related ifdefs Mike Frysinger
2009-09-14 20:07 ` [PATCH 26/72] Blackfin: add support for common FDPIC ptrace requests Mike Frysinger
2009-09-14 20:07 ` [PATCH 27/72] Blackfin: add an early shadow console Mike Frysinger
2009-09-14 20:07 ` [PATCH 28/72] Blackfin: catch hardware errors earlier during booting Mike Frysinger
2009-09-14 20:07 ` [PATCH 29/72] Blackfin: fix BF548 UART0 DMA IRQ translation Mike Frysinger
2009-09-14 20:07 ` [PATCH 30/72] Blackfin: bf538: add bfin_clear_PPI_STATUS() helper Mike Frysinger
2009-09-14 20:07 ` [PATCH 31/72] Blackfin: bf533-stamp: add resources for mmc_spi card Mike Frysinger
2009-09-14 20:07 ` [PATCH 32/72] Blackfin: do not try displaying the end of the stack Mike Frysinger
2009-09-14 20:07 ` [PATCH 33/72] Blackfin: bf537-stamp: update AD714x resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 34/72] Blackfin: clean up duplicate I2C device type definitions Mike Frysinger
2009-09-14 20:07 ` [PATCH 35/72] Blackfin: fix MPU handling of invalid memory accesses Mike Frysinger
2009-09-14 20:07 ` [PATCH 36/72] Blackfin: bf533-stamp: fix typo in SPI frequency for ad1836 codec Mike Frysinger
2009-09-14 20:07 ` [PATCH 37/72] Blackfin: improve double fault debug handling Mike Frysinger
2009-09-14 20:07 ` [PATCH 38/72] Blackfin: bf537-stamp: drop ATA interrupt probe workaround Mike Frysinger
2009-09-14 20:07 ` [PATCH 39/72] Blackfin: convert boards to use platform data with smc91x Mike Frysinger
2009-09-14 20:07 ` [PATCH 40/72] Blackfin: drop unused MMR defines that only cause bad code to be written Mike Frysinger
2009-09-14 20:07 ` [PATCH 41/72] Blackfin: cm-bf527/bf537-stamp: fix dm9000 resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 42/72] Blackfin: bf548-ezkit: fix incorrect LCD size parameters Mike Frysinger
2009-09-14 20:07 ` [PATCH 43/72] Blackfin: fix read buffer overflow Mike Frysinger
2009-09-14 20:07 ` [PATCH 44/72] Blackfin: bf538-ezkit: add resources for parallel flash Mike Frysinger
2009-09-14 20:07 ` [PATCH 45/72] Blackfin: update anomaly lists Mike Frysinger
2009-09-14 20:07 ` [PATCH 46/72] Blackfin: bf537-stamp: update ad1836 resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 47/72] Blackfin: cleanup sync handling when enabling/disabling cplbs Mike Frysinger
2009-09-14 20:07 ` [PATCH 48/72] Blackfin: SMP port does not yet support cpu frequency scaling Mike Frysinger
2009-09-14 20:07 ` [PATCH 49/72] Blackfin: fix BF522/BF523 max VCO mixup Mike Frysinger
2009-09-14 20:07 ` [PATCH 50/72] Blackfin: do not trace the exception handler Mike Frysinger
2009-09-14 20:07 ` [PATCH 51/72] Blackfin: drop board resources for dead devices (pbx/ad9960) Mike Frysinger
2009-09-14 20:07 ` [PATCH 52/72] Blackfin: punt dead cache locking code Mike Frysinger
2009-09-14 20:07 ` [PATCH 53/72] Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name Mike Frysinger
2009-09-14 20:07 ` [PATCH 54/72] Blackfin: optimize fixed code handling for the most common case Mike Frysinger
2009-09-14 20:07 ` [PATCH 55/72] Blackfin: handle the core timer interrupt with handle_percpu_irq on SMP Mike Frysinger
2009-09-14 20:08 ` [PATCH 56/72] Blackfin: Fix link errors with binutils 2.19 and GCC 4.3 Mike Frysinger
2009-09-14 20:08 ` [PATCH 57/72] Blackfin: remove useless duplicated assignment in gpio code Mike Frysinger
2009-09-14 20:08 ` [PATCH 58/72] Blackfin: use raw_smp_processor_id() in exception code Mike Frysinger
2009-09-14 20:08 ` [PATCH 59/72] Blackfin: fix spelling in a few comments Mike Frysinger
2009-09-14 20:08 ` [PATCH 60/72] Blackfin: workaround anomaly 05000283 Mike Frysinger
2009-09-14 20:08 ` Mike Frysinger [this message]
2009-09-14 20:08 ` [PATCH 62/72] Blackfin: bf537-stamp: add adp5588 gpio resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 63/72] Blackfin: fix typo in isram_write() Mike Frysinger
2009-09-14 20:08 ` [PATCH 64/72] Blackfin: fix BF54x SPI CS resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 65/72] Blackfin: use KERN_ALERT in all kgdb_test output Mike Frysinger
2009-09-14 20:08 ` [PATCH 66/72] Blackfin: add ICPLB coverage for async banks Mike Frysinger
2009-09-14 20:08 ` [PATCH 67/72] Blackfin: increase default async timings for parallel flashes Mike Frysinger
2009-09-14 20:08 ` [PATCH 68/72] Blackfin: bf538-ezkit: add SPI IRQ resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 69/72] Blackfin: cm-bf537u: split board from cm-bf537e Mike Frysinger
2009-09-14 20:08 ` [PATCH 70/72] Blackfin: update cm board resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 71/72] Blackfin: update ftrace_push_return_trace() breakage Mike Frysinger
2009-09-14 20:08 ` [PATCH 72/72] Blackfin: swap clocksource ratings for gptimer/cycles Mike Frysinger
2009-09-14 20:50 ` [PATCH 00/72] Blackfin updates for 2.6.32 Daniel Walker
2009-09-14 20:57 ` Mike Frysinger
2009-09-14 21:04 ` Daniel Walker
2009-09-14 21:07 ` Mike Frysinger
2009-09-14 21:21 ` Daniel Walker
2009-09-14 22:17 ` Mike Frysinger
2009-09-14 22:36 ` Daniel Walker
2009-09-16 2:54 ` Mike Frysinger
2009-09-16 2:56 ` Mike Frysinger
2009-09-16 3:06 ` Daniel Walker
2009-09-16 3:21 ` Mike Frysinger
2009-09-16 3:59 ` Daniel Walker
2009-09-16 4:13 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1252958896-25150-62-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®