From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org,
Philippe Gerum <rpm@xenomai.org>
Subject: [PATCH 05/72] Blackfin: checkpatch --file arch/blackfin/kernel/ipipe.c
Date: Mon, 14 Sep 2009 16:07:09 -0400 [thread overview]
Message-ID: <1252958896-25150-6-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1252958896-25150-1-git-send-email-vapier@gentoo.org>
From: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/kernel/ipipe.c | 36 +++++++++++++++++++-----------------
1 files changed, 19 insertions(+), 17 deletions(-)
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index b8d2203..a725677 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -30,10 +30,10 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kthread.h>
-#include <asm/unistd.h>
+#include <linux/unistd.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/atomic.h>
-#include <asm/io.h>
DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
@@ -90,6 +90,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
+ struct ipipe_irqdesc *idesc;
int m_ack, s = -1;
/*
@@ -100,17 +101,20 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
this_domain = __ipipe_current_domain;
+ idesc = &this_domain->irqs[irq];
- if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
+ if (unlikely(test_bit(IPIPE_STICKY_FLAG, &idesc->control)))
head = &this_domain->p_link;
else {
head = __ipipe_pipeline.next;
next_domain = list_entry(head, struct ipipe_domain, p_link);
- if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
- if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
- next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+ idesc = &next_domain->irqs[irq];
+ if (likely(test_bit(IPIPE_WIRED_FLAG, &idesc->control))) {
+ if (!m_ack && idesc->acknowledge != NULL)
+ idesc->acknowledge(irq, irq_to_desc(irq));
if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
- s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
+ s = __test_and_set_bit(IPIPE_STALL_FLAG,
+ &p->status);
__ipipe_dispatch_wired(next_domain, irq);
goto out;
}
@@ -121,14 +125,15 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
pos = head;
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
- if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
+ idesc = &next_domain->irqs[irq];
+ if (test_bit(IPIPE_HANDLE_FLAG, &idesc->control)) {
__ipipe_set_irq_pending(next_domain, irq);
- if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
- next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+ if (!m_ack && idesc->acknowledge != NULL) {
+ idesc->acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
- if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
+ if (!test_bit(IPIPE_PASS_FLAG, &idesc->control))
break;
pos = next_domain->p_link.next;
}
@@ -333,12 +338,9 @@ asmlinkage void __ipipe_sync_root(void)
void ___ipipe_sync_pipeline(unsigned long syncmask)
{
- if (__ipipe_root_domain_p) {
- if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
- return;
- }
+ if (__ipipe_root_domain_p &&
+ test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+ return;
__ipipe_sync_stage(syncmask);
}
-
-EXPORT_SYMBOL(show_stack);
--
1.6.4.2
next prev parent reply other threads:[~2009-09-14 20:23 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-14 20:07 [PATCH 00/72] Blackfin updates for 2.6.32 Mike Frysinger
2009-09-14 20:07 ` [PATCH 01/72] Blackfin: bf537-stamp: update ADP5588 header name Mike Frysinger
2009-09-14 20:07 ` [PATCH 02/72] Blackfin: bf537-stamp: declare SPI IRQ resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 03/72] Blackfin: bf537-stamp: add resources for AD1938 audio card Mike Frysinger
2009-09-14 20:07 ` [PATCH 04/72] Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4] Mike Frysinger
2009-09-14 20:07 ` Mike Frysinger [this message]
2009-09-14 20:07 ` [PATCH 06/72] Blackfin: fix misnomer of some I-pipe helpers Mike Frysinger
2009-09-14 20:07 ` [PATCH 07/72] Blackfin: export show_stack() to modules Mike Frysinger
2009-09-14 20:07 ` [PATCH 08/72] Blackfin: allow high priority domains to preempt schedule_tail() Mike Frysinger
2009-09-14 20:07 ` [PATCH 09/72] Blackfin: use generic name for EVT14 handler Mike Frysinger
2009-09-14 20:07 ` [PATCH 10/72] Blackfin: reuse evt_evt14 handler to perform irqtail epilogue Mike Frysinger
2009-09-14 20:07 ` [PATCH 11/72] Blackfin: allow EVT5 to preempt irqtail prologue (CONFIG_DEBUG_HWERR) Mike Frysinger
2009-09-14 20:07 ` [PATCH 12/72] Blackfin: document __ipipe_call_irqtail Mike Frysinger
2009-09-14 20:07 ` [PATCH 13/72] Blackfin: sanitize manual control of IPEND[4] Mike Frysinger
2009-09-14 20:07 ` [PATCH 14/72] Blackfin: inline I-pipe bypass code in ret_from_exception Mike Frysinger
2009-09-14 20:07 ` [PATCH 15/72] Blackfin: cleanup traps decode_address() a bit Mike Frysinger
2009-09-14 20:07 ` [PATCH 16/72] Blackfin: convert ptrace to new memory functions Mike Frysinger
2009-09-14 20:07 ` [PATCH 17/72] Blackfin: reject outdated/unused/wrong relocation types Mike Frysinger
2009-09-14 20:07 ` [PATCH 18/72] Blackfin: cleanup printk() usage in module code Mike Frysinger
2009-09-14 20:07 ` [PATCH 19/72] Blackfin: convert malloc()/memset() to zalloc() " Mike Frysinger
2009-09-14 20:07 ` [PATCH 20/72] Blackfin: cleanup module section checking Mike Frysinger
2009-09-14 20:07 ` [PATCH 21/72] Blackfin: fix module reloc handling for all memory regions Mike Frysinger
2009-09-14 20:07 ` [PATCH 22/72] Blackfin: clean up early memory setup code Mike Frysinger
2009-09-14 20:07 ` [PATCH 23/72] Blackfin: rename PCF8574 driver config Mike Frysinger
2009-09-14 20:07 ` [PATCH 24/72] Blackfin: unify duplicated SMP checks in L2 cache kconfig Mike Frysinger
2009-09-14 20:07 ` [PATCH 25/72] Blackfin: push SRAM locks down into related ifdefs Mike Frysinger
2009-09-14 20:07 ` [PATCH 26/72] Blackfin: add support for common FDPIC ptrace requests Mike Frysinger
2009-09-14 20:07 ` [PATCH 27/72] Blackfin: add an early shadow console Mike Frysinger
2009-09-14 20:07 ` [PATCH 28/72] Blackfin: catch hardware errors earlier during booting Mike Frysinger
2009-09-14 20:07 ` [PATCH 29/72] Blackfin: fix BF548 UART0 DMA IRQ translation Mike Frysinger
2009-09-14 20:07 ` [PATCH 30/72] Blackfin: bf538: add bfin_clear_PPI_STATUS() helper Mike Frysinger
2009-09-14 20:07 ` [PATCH 31/72] Blackfin: bf533-stamp: add resources for mmc_spi card Mike Frysinger
2009-09-14 20:07 ` [PATCH 32/72] Blackfin: do not try displaying the end of the stack Mike Frysinger
2009-09-14 20:07 ` [PATCH 33/72] Blackfin: bf537-stamp: update AD714x resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 34/72] Blackfin: clean up duplicate I2C device type definitions Mike Frysinger
2009-09-14 20:07 ` [PATCH 35/72] Blackfin: fix MPU handling of invalid memory accesses Mike Frysinger
2009-09-14 20:07 ` [PATCH 36/72] Blackfin: bf533-stamp: fix typo in SPI frequency for ad1836 codec Mike Frysinger
2009-09-14 20:07 ` [PATCH 37/72] Blackfin: improve double fault debug handling Mike Frysinger
2009-09-14 20:07 ` [PATCH 38/72] Blackfin: bf537-stamp: drop ATA interrupt probe workaround Mike Frysinger
2009-09-14 20:07 ` [PATCH 39/72] Blackfin: convert boards to use platform data with smc91x Mike Frysinger
2009-09-14 20:07 ` [PATCH 40/72] Blackfin: drop unused MMR defines that only cause bad code to be written Mike Frysinger
2009-09-14 20:07 ` [PATCH 41/72] Blackfin: cm-bf527/bf537-stamp: fix dm9000 resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 42/72] Blackfin: bf548-ezkit: fix incorrect LCD size parameters Mike Frysinger
2009-09-14 20:07 ` [PATCH 43/72] Blackfin: fix read buffer overflow Mike Frysinger
2009-09-14 20:07 ` [PATCH 44/72] Blackfin: bf538-ezkit: add resources for parallel flash Mike Frysinger
2009-09-14 20:07 ` [PATCH 45/72] Blackfin: update anomaly lists Mike Frysinger
2009-09-14 20:07 ` [PATCH 46/72] Blackfin: bf537-stamp: update ad1836 resources Mike Frysinger
2009-09-14 20:07 ` [PATCH 47/72] Blackfin: cleanup sync handling when enabling/disabling cplbs Mike Frysinger
2009-09-14 20:07 ` [PATCH 48/72] Blackfin: SMP port does not yet support cpu frequency scaling Mike Frysinger
2009-09-14 20:07 ` [PATCH 49/72] Blackfin: fix BF522/BF523 max VCO mixup Mike Frysinger
2009-09-14 20:07 ` [PATCH 50/72] Blackfin: do not trace the exception handler Mike Frysinger
2009-09-14 20:07 ` [PATCH 51/72] Blackfin: drop board resources for dead devices (pbx/ad9960) Mike Frysinger
2009-09-14 20:07 ` [PATCH 52/72] Blackfin: punt dead cache locking code Mike Frysinger
2009-09-14 20:07 ` [PATCH 53/72] Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name Mike Frysinger
2009-09-14 20:07 ` [PATCH 54/72] Blackfin: optimize fixed code handling for the most common case Mike Frysinger
2009-09-14 20:07 ` [PATCH 55/72] Blackfin: handle the core timer interrupt with handle_percpu_irq on SMP Mike Frysinger
2009-09-14 20:08 ` [PATCH 56/72] Blackfin: Fix link errors with binutils 2.19 and GCC 4.3 Mike Frysinger
2009-09-14 20:08 ` [PATCH 57/72] Blackfin: remove useless duplicated assignment in gpio code Mike Frysinger
2009-09-14 20:08 ` [PATCH 58/72] Blackfin: use raw_smp_processor_id() in exception code Mike Frysinger
2009-09-14 20:08 ` [PATCH 59/72] Blackfin: fix spelling in a few comments Mike Frysinger
2009-09-14 20:08 ` [PATCH 60/72] Blackfin: workaround anomaly 05000283 Mike Frysinger
2009-09-14 20:08 ` [PATCH 61/72] Blackfin: add some isram-driver self tests Mike Frysinger
2009-09-14 20:08 ` [PATCH 62/72] Blackfin: bf537-stamp: add adp5588 gpio resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 63/72] Blackfin: fix typo in isram_write() Mike Frysinger
2009-09-14 20:08 ` [PATCH 64/72] Blackfin: fix BF54x SPI CS resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 65/72] Blackfin: use KERN_ALERT in all kgdb_test output Mike Frysinger
2009-09-14 20:08 ` [PATCH 66/72] Blackfin: add ICPLB coverage for async banks Mike Frysinger
2009-09-14 20:08 ` [PATCH 67/72] Blackfin: increase default async timings for parallel flashes Mike Frysinger
2009-09-14 20:08 ` [PATCH 68/72] Blackfin: bf538-ezkit: add SPI IRQ resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 69/72] Blackfin: cm-bf537u: split board from cm-bf537e Mike Frysinger
2009-09-14 20:08 ` [PATCH 70/72] Blackfin: update cm board resources Mike Frysinger
2009-09-14 20:08 ` [PATCH 71/72] Blackfin: update ftrace_push_return_trace() breakage Mike Frysinger
2009-09-14 20:08 ` [PATCH 72/72] Blackfin: swap clocksource ratings for gptimer/cycles Mike Frysinger
2009-09-14 20:50 ` [PATCH 00/72] Blackfin updates for 2.6.32 Daniel Walker
2009-09-14 20:57 ` Mike Frysinger
2009-09-14 21:04 ` Daniel Walker
2009-09-14 21:07 ` Mike Frysinger
2009-09-14 21:21 ` Daniel Walker
2009-09-14 22:17 ` Mike Frysinger
2009-09-14 22:36 ` Daniel Walker
2009-09-16 2:54 ` Mike Frysinger
2009-09-16 2:56 ` Mike Frysinger
2009-09-16 3:06 ` Daniel Walker
2009-09-16 3:21 ` Mike Frysinger
2009-09-16 3:59 ` Daniel Walker
2009-09-16 4:13 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1252958896-25150-6-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rpm@xenomai.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®