From: Ian Stirling <root@mauve.demon.co.uk>
To: landley@trommello.org
Cc: andre@linux-ide.org (Andre Hedrick), cw@f00f.org (Chris Wedgwood),
linux-kernel@vger.kernel.org
Subject: Re: Journaling pointless with today's hard disks?
Date: Tue, 27 Nov 2001 01:23:32 +0000 (GMT) [thread overview]
Message-ID: <200111270123.BAA02056@mauve.demon.co.uk> (raw)
In-Reply-To: <0111261535070J.02001@localhost.localdomain> from "Rob Landley" at Nov 26, 2001 03:35:07 PM
>
> On Monday 26 November 2001 15:30, Andre Hedrick wrote:
> > On Mon, 26 Nov 2001, Rob Landley wrote:
>
> > > Just add an off-the-shelf capacitor to your circuit. The firmware
> > > already has to detect power failure in order to park the head sanely, so
> > Send me an outline/discription and I will present it during the Dec T13
> > meeting for a proposal number for inclusion into ATA-7.
>
> What kind of write-up do you want? (How formal?)
>
> The trick here is limiting the scope of the problem. Your buffer can't be
> larger than you can reliably write back on a sudden power failure. (This
> should be obvious.) So the obvious answer is to make your writeback cache
> SMALL. The problems that go with flushing it are then correspondingly small.
<snip>
>
> Now a cache large enough to hold 2 full tracks could also hold dozens of
> individual sectors scattered around the disk, which could take a full second
> to write off and power down. This is a "doctor, it hurts when I do this"
> question. DON'T DO THAT.
Or, to seek to a journal track, and write the cache to it.
Errors are a problem, writing twice may help.
This avoids having to block on bad write patterns, for example, if you
are writing mixed blocks that go to tracks 1 and 88, you can't start to
write blocks that would go to track 44.
Performance would rise if it can do the writes in elevator order.
<snip>
> That way, the power down problem is strictly limited:
>
> 1) write out the track you're over
> 2) seek to the second track
> 3) write that out too
> 4) park the head
Or 2) optionally seek to the journal track, and write the journal.
>
> What new hardware is involved?
>
> Add a capacitor.
>
> Add a power level sensor. (Drives may already have this to know when to park
> the head.)
Most drives I've taken apart recently seem to have passive means,
a spring to move the head to the side, and a magnet to hold it there.
<Snip>>
> I think that's it. Did I miss anything? Oh yeah, on power fail stop
It needs a power switch to stop back-feeding the computer.
next prev parent reply other threads:[~2001-11-27 1:28 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.1006644421.6553.linux-kernel2news@redhat.com>
2001-11-24 13:03 ` Florian Weimer
2001-11-24 13:40 ` Rik van Riel
2001-11-24 16:36 ` Phil Howard
2001-11-24 17:19 ` Charles Marslett
2001-11-24 17:31 ` Florian Weimer
2001-11-24 17:41 ` Matthias Andree
2001-11-24 19:20 ` Florian Weimer
2001-11-24 19:29 ` Rik van Riel
2001-11-24 22:51 ` John Alvord
2001-11-24 23:41 ` Phil Howard
2001-11-25 0:24 ` Ian Stirling
2001-11-25 0:53 ` Phil Howard
2001-11-25 1:25 ` H. Peter Anvin
2001-11-25 1:44 ` Sven.Riedel
2001-11-24 22:28 ` H. Peter Anvin
2001-11-25 4:49 ` Andre Hedrick
2001-11-24 23:04 ` Pedro M. Rodrigues
2001-11-24 23:23 ` Stephen Satchell
2001-11-24 23:29 ` H. Peter Anvin
2001-11-26 18:05 ` Steve Brueggeman
2001-11-26 23:49 ` Martin Eriksson
2001-11-27 0:06 ` Andreas Dilger
2001-11-27 0:16 ` Andre Hedrick
2001-11-27 7:38 ` Andreas Dilger
2001-11-27 11:48 ` Ville Herva
2001-11-27 0:18 ` Jonathan Lundell
2001-11-27 1:01 ` Ian Stirling
2001-11-27 1:33 ` H. Peter Anvin
2001-11-27 1:57 ` Steve Underwood
2001-11-27 5:04 ` Stephen Satchell
2001-11-25 4:20 ` Pete Zaitcev
2001-11-25 12:30 ` Matthias Andree
2001-11-25 15:04 ` Barry K. Nathan
2001-11-25 16:31 ` Matthias Andree
2001-11-27 2:39 ` Pavel Machek
2001-12-03 10:23 ` Matthias Andree
2001-11-25 9:14 ` Chris Wedgwood
2001-11-25 22:55 ` Daniel Phillips
2001-11-26 16:59 ` Rob Landley
2001-11-26 20:30 ` Andre Hedrick
2001-11-26 20:35 ` Rob Landley
2001-11-26 23:59 ` Andreas Dilger
2001-11-27 0:24 ` H. Peter Anvin
2001-11-27 0:52 ` H. Peter Anvin
2001-11-27 1:11 ` Andrew Morton
2001-11-27 1:15 ` H. Peter Anvin
2001-11-27 16:59 ` Matthias Andree
2001-11-27 16:56 ` Matthias Andree
2001-11-27 1:23 ` Ian Stirling [this message]
2001-11-26 23:00 ` Rob Landley
2001-11-27 2:41 ` H. Peter Anvin
2001-11-27 0:19 ` Rob Landley
2001-11-27 23:35 ` Andreas Bombe
2001-11-28 14:32 ` Rob Landley
2001-11-27 3:39 ` Ian Stirling
2001-11-27 7:03 ` Ville Herva
2001-11-27 16:50 ` Matthias Andree
2001-11-27 20:31 ` Rob Landley
2001-11-28 18:43 ` Matthias Andree
2001-11-28 18:46 ` Rob Landley
2001-11-28 22:19 ` Matthias Andree
2001-11-29 22:21 ` Pavel Machek
2001-12-01 10:55 ` Jeff V. Merkey
2001-12-02 0:08 ` Matthias Andree
2001-12-03 20:04 ` Pavel Machek
2001-11-26 20:53 ` Richard B. Johnson
2001-11-26 21:18 ` Journaling pointless with today's hard disks? [wandering OT] Rob Landley
2001-11-27 0:32 ` Journaling pointless with today's hard disks? H. Peter Anvin
2001-11-27 16:39 ` Matthias Andree
2001-11-27 17:42 ` Martin Eriksson
2001-11-28 16:35 ` Ian Stirling
2001-11-26 17:14 ` Steve Brueggeman
2001-11-26 20:36 ` Andre Hedrick
2001-11-26 21:14 ` Steve Brueggeman
2001-11-26 21:36 ` Andre Hedrick
2001-11-27 16:36 ` Steve Brueggeman
2001-11-27 20:04 ` Bill Davidsen
2001-11-27 21:28 ` Wayne Whitney
2001-11-27 21:52 ` Andre Hedrick
2001-11-28 11:53 ` Pedro M. Rodrigues
2001-11-25 13:52 ` Pedro M. Rodrigues
2001-11-28 23:25 Frank de Lange
2001-11-29 1:52 ` Matthias Andree
-- strict thread matches above, loose matches on Subject: below --
2001-11-28 17:22 David Balazic
2001-11-28 14:36 Galappatti, Kishantha
2001-11-25 1:20 dnu478nt5w@mailexpire.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200111270123.BAA02056@mauve.demon.co.uk \
--to=root@mauve.demon.co.uk \
--cc=andre@linux-ide.org \
--cc=cw@f00f.org \
--cc=landley@trommello.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®