From: mlevitsk@redhat.com
To: Paolo Bonzini <pbonzini@redhat.com>,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: d.riley@proxmox.com, jon@nutanix.com
Subject: Re: [PATCH 24/28] KVM: x86/mmu: hard code more bits in kvm_init_shadow_npt_mmu
Date: Tue, 02 Jun 2026 10:30:26 -0400 [thread overview]
Message-ID: <c495f6d53e6472b7e9da02773f2f7916f69091cf.camel@redhat.com> (raw)
In-Reply-To: <20260505195226.563317-25-pbonzini@redhat.com>
On Tue, 2026-05-05 at 21:52 +0200, Paolo Bonzini wrote:
> The host CR0 does not really reflect onto the NPT format because
> hCR0.PG=1 must be set and hCR0.WP is ignored. Carve that in stone
> by removing the cr0 argument from kvm_init_shadow_npt_mmu.
>
> Pass in WP=1 as well; it does not matter for GMET disabled because
> PFERR_USER_MASK is always set, but a cleared W bit in the nested page
> tables cannot be overridden in supervisor mode when GMET is enabled,
> either. In fact, since CR0.WP=0 is the weird "extra accesses allowed"
> mode, it is acutally easier think about it being always set.
>
> Likewise, clear X86_CR4_SMAP to avoid that KVM erroneously faults on
> supervisor accesses to an U=1 page.
Hi!
Minor nitpick: This all makes sense but can we also add the same comment to the code?
Commit messages tend to get lost after a while, when new layer of refactoring
replaces them in git blame.
> Signed-off-by: Paolo Bonzini <[[pbonzini@redhat.com](mailto:pbonzini@redhat.com)](mailto:[pbonzini@redhat.com](mailto:pbonzini@redhat.com))>
> ---
> arch/x86/kvm/mmu.h | 4 ++--
> arch/x86/kvm/mmu/mmu.c | 8 ++++----
> arch/x86/kvm/svm/nested.c | 2 +-
> 3 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
> index e1e3869f568b..1b354e1f2d81 100644
> --- a/arch/x86/kvm/mmu.h
> +++ b/arch/x86/kvm/mmu.h
> @@ -96,8 +96,8 @@ void kvm_mmu_set_me_spte_mask(u64 me_value, u64 me_mask);
> void kvm_mmu_set_ept_masks(bool has_ad_bits);
>
> void kvm_init_mmu(struct kvm_vcpu *vcpu);
> -void kvm_init_shadow_npt_mmu(struct kvm_vcpu *vcpu, unsigned long cr0,
> - unsigned long cr4, u64 efer, gpa_t nested_cr3);
> +void kvm_init_shadow_npt_mmu(struct kvm_vcpu *vcpu, unsigned long cr4,
> + u64 efer, gpa_t nested_cr3);
> void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
> int huge_page_level, bool accessed_dirty,
> bool mbec, gpa_t new_eptp);
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index 912c8e97ef61..5a796ae8c396 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -5939,13 +5939,13 @@ static void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu,
> shadow_mmu_init_context(vcpu, context, cpu_role, root_role);
> }
>
> -void kvm_init_shadow_npt_mmu(struct kvm_vcpu *vcpu, unsigned long cr0,
> - unsigned long cr4, u64 efer, gpa_t nested_cr3)
> +void kvm_init_shadow_npt_mmu(struct kvm_vcpu *vcpu, unsigned long cr4,
> + u64 efer, gpa_t nested_cr3)
> {
> struct kvm_mmu *context = &vcpu->arch.guest_mmu;
> struct kvm_mmu_role_regs regs = {
> - .cr0 = cr0,
> - .cr4 = cr4 & ~X86_CR4_PKE,
> + .cr0 = X86_CR0_PG | X86_CR0_WP,
> + .cr4 = cr4 & ~(X86_CR4_PKE | X86_CR4_SMAP),
Nitpick: If we assume that EFER.NX is always true for NPT, as I suggested in the previous patch,
we can drop CR4.SMEP from .cr4, which could clarify that
NPT doesn't depend on host CR4.SMEP either.
What do you think?
> .efer = efer,
> };
> union kvm_cpu_role cpu_role = kvm_calc_cpu_role(vcpu, ®s);
> diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
> index df232153eb24..a1cffd274000 100644
> --- a/arch/x86/kvm/svm/nested.c
> +++ b/arch/x86/kvm/svm/nested.c
> @@ -93,7 +93,7 @@ static void nested_svm_init_mmu_context(struct kvm_vcpu *vcpu)
> * when called via KVM_SET_NESTED_STATE, that state may _not_ match current
> * vCPU state. CR0.WP is explicitly ignored, while CR0.PG is required.
> */
> - kvm_init_shadow_npt_mmu(vcpu, X86_CR0_PG, svm->vmcb01.ptr->save.cr4,
> + kvm_init_shadow_npt_mmu(vcpu, svm->vmcb01.ptr->save.cr4,
> svm->vmcb01.ptr->save.efer,
> svm->nested.ctl.nested_cr3);
> vcpu->arch.mmu->get_guest_pgd = nested_svm_get_tdp_cr3;
Best regards,
Maxim Levitsky
next prev parent reply other threads:[~2026-06-02 14:35 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-05 19:51 [PATCH v6 00/28] KVM: combined patchset for MBEC/GMET support Paolo Bonzini
2026-05-05 19:51 ` [PATCH 01/28] KVM: TDX/VMX: rework EPT_VIOLATION_EXEC_FOR_RING3_LIN into PROT_MASK Paolo Bonzini
2026-06-02 14:19 ` mlevitsk
2026-05-05 19:52 ` [PATCH 02/28] KVM: x86/mmu: remove SPTE_PERM_MASK Paolo Bonzini
2026-06-02 14:20 ` mlevitsk
2026-05-05 19:52 ` [PATCH 03/28] KVM: x86/mmu: free up bit 10 of PTEs in preparation for MBEC Paolo Bonzini
2026-06-02 14:20 ` mlevitsk
2026-05-05 19:52 ` [PATCH 04/28] KVM: x86/mmu: shuffle high bits of SPTEs " Paolo Bonzini
2026-06-02 14:20 ` mlevitsk
2026-05-05 19:52 ` [PATCH 05/28] KVM: x86/mmu: remove SPTE_EPT_* Paolo Bonzini
2026-06-02 14:21 ` mlevitsk
2026-05-05 19:52 ` [PATCH 06/28] KVM: x86/mmu: merge make_spte_{non,}executable Paolo Bonzini
2026-06-02 14:22 ` mlevitsk
2026-05-05 19:52 ` [PATCH 07/28] KVM: x86/mmu: rename and clarify BYTE_MASK Paolo Bonzini
2026-06-02 14:22 ` mlevitsk
2026-05-05 19:52 ` [PATCH 08/28] KVM: x86/mmu: separate more EPT/non-EPT permission_fault() Paolo Bonzini
2026-05-07 14:35 ` Sean Christopherson
2026-06-02 14:22 ` mlevitsk
2026-05-05 19:52 ` [PATCH 09/28] KVM: x86/mmu: introduce ACC_READ_MASK Paolo Bonzini
2026-06-02 14:23 ` mlevitsk
2026-05-05 19:52 ` [PATCH 10/28] KVM: x86/mmu: pass PFERR_GUEST_PAGE/FINAL_MASK to kvm_translate_gpa Paolo Bonzini
2026-06-02 14:23 ` mlevitsk
2026-05-05 19:52 ` [PATCH 11/28] KVM: x86/mmu: pass pte_access for final nGPA->GPA walk Paolo Bonzini
2026-06-02 14:24 ` mlevitsk
2026-05-05 19:52 ` [PATCH 12/28] KVM: x86: make translate_nested_gpa vendor-specific Paolo Bonzini
2026-06-02 14:24 ` mlevitsk
2026-05-05 19:52 ` [PATCH 13/28] KVM: x86/mmu: split XS/XU bits for EPT Paolo Bonzini
2026-06-02 14:24 ` mlevitsk
2026-05-05 19:52 ` [PATCH 14/28] KVM: x86/mmu: move cr4_smep to base role Paolo Bonzini
2026-06-02 14:25 ` mlevitsk
2026-05-05 19:52 ` [PATCH 15/28] KVM: VMX: enable use of MBEC Paolo Bonzini
2026-05-07 14:40 ` Sean Christopherson
2026-06-02 14:26 ` mlevitsk
2026-05-05 19:52 ` [PATCH 16/28] KVM: nVMX: pass advanced EPT violation vmexit info to guest Paolo Bonzini
2026-06-02 14:26 ` mlevitsk
2026-05-05 19:52 ` [PATCH 17/28] KVM: nVMX: pass PFERR_USER_MASK to MMU on EPT violations Paolo Bonzini
2026-06-02 14:27 ` mlevitsk
2026-05-05 19:52 ` [PATCH 18/28] KVM: x86/mmu: add support for MBEC to EPT page table walks Paolo Bonzini
2026-06-02 14:28 ` mlevitsk
2026-05-05 19:52 ` [PATCH 19/28] KVM: nVMX: advertise MBEC to nested guests Paolo Bonzini
2026-06-02 14:28 ` mlevitsk
2026-05-05 19:52 ` [PATCH 20/28] KVM: nVMX: allow MBEC with EVMCS Paolo Bonzini
2026-06-02 14:28 ` mlevitsk
2026-06-02 15:29 ` Vitaly Kuznetsov
2026-05-05 19:52 ` [PATCH 21/28] KVM: x86/mmu: propagate access mask from root pages down Paolo Bonzini
2026-06-02 14:29 ` mlevitsk
2026-05-05 19:52 ` [PATCH 22/28] KVM: x86/mmu: introduce cpu_role bit for availability of PFEC.I/D Paolo Bonzini
2026-06-02 14:29 ` mlevitsk
2026-05-05 19:52 ` [PATCH 23/28] KVM: SVM: add GMET bit definitions Paolo Bonzini
2026-06-02 14:30 ` mlevitsk
2026-05-05 19:52 ` [PATCH 24/28] KVM: x86/mmu: hard code more bits in kvm_init_shadow_npt_mmu Paolo Bonzini
2026-06-02 14:30 ` mlevitsk [this message]
2026-05-05 19:52 ` [PATCH 25/28] KVM: x86/mmu: add support for GMET to NPT page table walks Paolo Bonzini
2026-06-02 14:31 ` mlevitsk
2026-05-05 19:52 ` [PATCH 26/28] KVM: SVM: enable GMET and set it in MMU role Paolo Bonzini
2026-06-02 14:31 ` mlevitsk
2026-05-05 19:52 ` [PATCH 27/28] KVM: SVM: work around errata 1218 Paolo Bonzini
2026-06-02 14:31 ` mlevitsk
2026-05-05 19:52 ` [PATCH 28/28] KVM: nSVM: enable GMET for guests Paolo Bonzini
2026-06-02 14:32 ` mlevitsk
2026-05-07 14:44 ` [PATCH v6 00/28] KVM: combined patchset for MBEC/GMET support Sean Christopherson
2026-05-07 17:49 ` Paolo Bonzini
2026-05-11 10:53 ` David Riley
2026-05-11 10:55 ` Paolo Bonzini
2026-05-11 11:07 ` David Riley
2026-05-14 2:11 ` Chao Gao
2026-05-14 19:13 ` Sean Christopherson
2026-05-12 14:32 ` Paolo Bonzini
2026-05-12 16:34 ` Paolo Bonzini
2026-05-15 14:53 ` David Riley
2026-05-15 18:31 ` Sean Christopherson
2026-05-19 8:02 ` David Riley
-- strict thread matches above, loose matches on Subject: below --
2026-04-30 15:07 [PATCH v5 " Paolo Bonzini
2026-04-30 15:07 ` [PATCH 24/28] KVM: x86/mmu: hard code more bits in kvm_init_shadow_npt_mmu Paolo Bonzini
2026-04-30 19:09 ` Sean Christopherson
2026-05-01 3:50 ` Paolo Bonzini
2026-05-01 13:29 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c495f6d53e6472b7e9da02773f2f7916f69091cf.camel@redhat.com \
--to=mlevitsk@redhat.com \
--cc=d.riley@proxmox.com \
--cc=jon@nutanix.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome