From: xiong <xiong@qca.qualcomm.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <qca-linux-team@qualcomm.com>, <nic-devel@qualcomm.com>,
xiong <xiong@qca.qualcomm.com>
Subject: [PATCH 23/37] atl1c: remove MDIO_REG_ADDR_MASK in atl1c_mdio_read/write
Date: Fri, 13 Apr 2012 08:14:48 +0800 [thread overview]
Message-ID: <1334276102-15866-24-git-send-email-xiong@qca.qualcomm.com> (raw)
In-Reply-To: <1334276102-15866-1-git-send-email-xiong@qca.qualcomm.com>
MDIO_REG_ADDR_MASK is already applied in function
atl1c_write_phy_reg and atl1c_read_phy_reg
Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 8836c84..6534963 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -569,7 +569,7 @@ static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num)
struct atl1c_adapter *adapter = netdev_priv(netdev);
u16 result;
- atl1c_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result);
+ atl1c_read_phy_reg(&adapter->hw, reg_num, &result);
return result;
}
@@ -578,7 +578,7 @@ static void atl1c_mdio_write(struct net_device *netdev, int phy_id,
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
- atl1c_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val);
+ atl1c_write_phy_reg(&adapter->hw, reg_num, val);
}
/*
--
1.7.7
next prev parent reply other threads:[~2012-04-13 0:18 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-13 0:14 [PATCH 00/37] atl1c: update hardware settings xiong
2012-04-13 0:14 ` [PATCH 01/37] atl1c: update author contact info & company/driver desciption xiong
2012-04-13 0:14 ` [PATCH 02/37] atl1c: remove multiple-RX-Q code xiong
2012-04-13 0:14 ` [PATCH 03/37] atl1c: remove HDS register xiong
2012-04-13 0:14 ` [PATCH 04/37] atl1c: remove VPD register xiong
2012-04-14 0:45 ` David Miller
2012-04-14 9:12 ` Huang, Xiong
2012-04-14 14:22 ` Ben Hutchings
2012-04-14 18:24 ` David Miller
2012-04-17 8:36 ` Huang, Xiong
2012-04-13 0:14 ` [PATCH 05/37] atl1c: remove SMB/CMB DMA related code xiong
2012-04-13 0:14 ` [PATCH 06/37] atl1c: split 2 32bit registers of TPD to 4 16bit registers xiong
2012-04-13 0:14 ` [PATCH 07/37] atl1c: remove code related to rxq 1/2/3 xiong
2012-04-13 0:14 ` [PATCH 08/37] atl1c: wrong register used to stop TXQ xiong
2012-04-13 0:14 ` [PATCH 09/37] atl1c: correct wrong definition of REG_DMA_CTRL xiong
2012-04-13 0:14 ` [PATCH 10/37] atl1c: remove dmaw_block xiong
2012-04-13 0:14 ` [PATCH 11/37] atl1c: using fixed TXQ configuration for l2cb and l1c xiong
2012-04-13 0:14 ` [PATCH 12/37] atl1c: restore max-read-request-size in Device Conrol Register xiong
2012-04-13 17:02 ` Ben Hutchings
2012-04-14 10:39 ` Huang, Xiong
2012-04-13 0:14 ` [PATCH 13/37] atl1c: threshold for ASPM is changed based on chip capability xiong
2012-04-13 0:14 ` [PATCH 14/37] atl1c: add module parameter for l1c_wait_until_idle xiong
2012-04-13 0:14 ` [PATCH 15/37] atl1c: update right threshold for TSO xiong
2012-04-13 0:14 ` [PATCH 16/37] atl1c: remove dmar_dly_cnt and dmaw_dly_cnt xiong
2012-04-13 0:14 ` [PATCH 17/37] atl1c: clear PCIE error status in atl1c_reset_pcie xiong
2012-04-13 0:14 ` [PATCH 18/37] atl1c: refine reg definition of REG_MASTER_CTRL xiong
2012-04-13 0:14 ` [PATCH 19/37] atl1c: clear bit MASTER_CTRL_CLK_SEL_DIS in atl1c_pcie_patch xiong
2012-04-13 0:14 ` [PATCH 20/37] atl1c: refine/update ASPM configuration xiong
2012-04-13 0:14 ` [PATCH 21/37] atl1c: refine atl1c_pcie_patch xiong
2012-04-13 0:14 ` [PATCH 22/37] atl1c: fix WoL(magic) issue for l2cb 1.1 xiong
2012-04-13 0:14 ` xiong [this message]
2012-04-13 0:14 ` [PATCH 24/37] atl1c: remove REG_PHY_STATUS xiong
2012-04-13 0:14 ` [PATCH 25/37] atl1c: refine phy-register read/write function xiong
2012-04-13 0:14 ` [PATCH 26/37] atl1c: remove PHY contrl in atl1c_reset_pcie xiong
2012-04-13 0:14 ` [PATCH 27/37] atl1c: refine SERDES-clock related code xiong
2012-04-13 0:14 ` [PATCH 28/37] atl1c: remove PHY polling from atl1c_open xiong
2012-04-13 0:14 ` [PATCH 29/37] atl1c: update PHY reset related routine xiong
2012-04-13 0:14 ` [PATCH 30/37] atl1c: remove PHY reset/init for link down event xiong
2012-04-13 0:14 ` [PATCH 31/37] atl1c: add function atl1c_power_saving xiong
2012-04-13 0:14 ` [PATCH 32/37] atl1c: refine start/enable code for MAC module xiong
2012-04-13 0:14 ` [PATCH 33/37] atl1c: add PHY link event(up/down) patch xiong
2012-04-13 0:14 ` [PATCH 34/37] atl1c: clear WoL status when reset pcie xiong
2012-04-13 0:15 ` [PATCH 35/37] atl1c: remove code of closing register writable attribution xiong
2012-04-13 0:15 ` [PATCH 36/37] atl1c: refine mac address related code xiong
2012-04-13 0:15 ` [PATCH 37/37] atl1c: cancel task when interface closed xiong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334276102-15866-24-git-send-email-xiong@qca.qualcomm.com \
--to=xiong@qca.qualcomm.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic-devel@qualcomm.com \
--cc=qca-linux-team@qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®