From: Eddie Williams <Eddie.Williams@steeleye.com>
To: Venkatesh Ramamurthy <Venkateshr@ami.com>
Cc: "'arjan@fenrus.demon.nl'" <arjan@fenrus.demon.nl>,
linux-kernel@vger.kernel.org,
"'linux-scsi@vger.kernel.org'" <linux-scsi@vger.kernel.org>
Subject: Re: Linux not adhering to BIOS Drive boot order?
Date: Tue, 16 Jan 2001 11:53:47 -0500 [thread overview]
Message-ID: <200101161653.f0GGrl101735@aslan.sc.steeleye.com> (raw)
In-Reply-To: Message from Venkatesh Ramamurthy <Venkateshr@ami.com> of "Tue, 16 Jan 2001 11:31:25 EST." <1355693A51C0D211B55A00105ACCFE64E9518F@ATL_MS1>
Why is this a SCSI ML problem? The problem is that the OS can't figure out
where to mount root from. Sounds like an OS problem.
I think the file system label is the leading candidate to solve this. One
really does not care if the root disk is called /dev/sda or /dev/fred. All
one cares is that you can boot your system and the right disks are mounted.
What I have seen so far with the fs label this either does solve this today or
it can solve this. I notice today on some systems the entries in /etc/fstab
already are "deviceless" in that it does not have the disk/partition but
simply the disk label.
Can lilo use a label for the root disk also? I have not looked into that yet.
If it does not can it? When I noticed the use of the label in /etc/fstab my
first thought was "alright, someone is solving this problem." I have not
taken the time - not a burning issue with me right now - to see if this is all
done yet though.
Keep in mind that the example where /dev/sda is where root lies is that "easy"
case. The hard case is what happens if someone installs on /dev/sdg. Now
they boot up with a disk array turned off. Is the mid-layer going to figure
out that what is now /dev/sda suppose to be /dev/sdg? Or they install to
/dev/sdb and /dev/sda goes bad so they pull it out?
Eddie
> > In article <1355693A51C0D211B55A00105ACCFE64E9518C@ATL_MS1> you wrote:
> >
> > > we need some kind of signature being written in the drive, which the
> > kernel
> > > will use for determining the boot drive and later re-order drives, if
> > > required.
> >
> > Like the ext2 labels? (man e2label)
> [Venkatesh Ramamurthy] This re-ordering of the scsi drives should
> be done by SCSI ML , so is incorporating ext2 fs data structure knowledge on
> the SCSI ML a good idea?.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-16 16:54 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-16 16:31 Venkatesh Ramamurthy
2001-01-16 16:53 ` Eddie Williams [this message]
2001-01-16 19:48 ` John Summerfield
-- strict thread matches above, loose matches on Subject: below --
2001-01-18 16:55 David Balazic
2001-01-18 19:49 ` Tim Fletcher
2001-01-18 16:36 Andries.Brouwer
2001-01-18 11:01 David Balazic
2001-01-18 11:35 ` Tim Fletcher
2001-01-18 13:01 ` Xavier Bestel
2001-01-18 14:03 ` Tim Fletcher
2001-01-17 11:04 David Balazic
2001-01-17 10:56 David Balazic
2001-01-17 10:48 David Balazic
2001-01-17 23:23 ` Andreas Dilger
2001-01-18 10:14 ` David Balazic
2001-01-17 10:21 David Balazic
2001-01-17 10:28 ` Boszormenyi Zoltan
2001-01-16 22:54 Venkatesh Ramamurthy
2001-01-16 20:35 Venkatesh Ramamurthy
2001-01-16 20:14 Venkatesh Ramamurthy
2001-01-16 20:30 ` Dr. Kelsey Hudson
2001-01-16 21:18 ` Andreas Dilger
2001-01-17 15:33 ` Mike Porter
2001-01-17 16:16 ` James Bottomley
2001-01-17 17:07 ` Craig Ruff
2001-01-18 12:50 ` Peter Samuelson
2001-01-18 17:59 ` idalton
2001-01-18 18:14 ` Peter Samuelson
2001-01-18 20:53 ` Matti Aarnio
2001-01-18 22:55 ` David Weinehall
2001-01-16 17:39 Venkatesh Ramamurthy
2001-01-16 17:58 ` David Woodhouse
2001-01-16 21:11 ` Andreas Dilger
2001-01-17 9:38 ` David Woodhouse
2001-01-17 9:55 ` Jeff Garzik
2001-01-17 10:19 ` Andreas Dilger
2001-01-17 10:02 ` David Woodhouse
2001-01-19 1:17 ` H. Peter Anvin
2001-01-17 10:12 ` Andreas Dilger
2001-01-17 23:19 ` Russell King
2001-01-17 19:50 ` Werner Almesberger
2001-01-17 20:43 ` Andreas Dilger
2001-01-18 0:14 ` Tim Fletcher
2001-01-18 0:39 ` Andreas Dilger
2001-01-18 0:59 ` Tim Fletcher
2001-01-18 9:41 ` Helge Hafting
2001-01-16 17:30 Bryan Henderson
2001-01-16 17:04 David Balazic
[not found] <Venkateshr@ami.com>
2001-01-16 16:56 ` Venkatesh Ramamurthy
2001-01-16 19:52 ` John Summerfield
2001-01-16 16:51 Venkatesh Ramamurthy
2001-01-16 17:09 ` Honza Pazdziora
2001-01-16 16:46 Venkatesh Ramamurthy
2001-01-16 16:43 Venkatesh Ramamurthy
2001-01-16 20:01 ` Dr. Kelsey Hudson
2001-01-16 20:37 ` Michael Meissner
2001-01-16 21:01 ` Andi Kleen
2001-01-16 21:23 ` Michael Meissner
2001-01-16 23:32 ` J . A . Magallon
2001-01-17 0:05 ` Dr. Kelsey Hudson
2001-01-17 0:42 ` Michael Meissner
2001-01-17 2:14 ` Peter Samuelson
2001-01-17 17:22 ` Michael Meissner
2001-01-17 18:41 ` Douglas Gilbert
2001-01-17 9:45 ` Ishikawa
2001-01-17 15:45 ` J . A . Magallon
2001-01-16 23:51 ` Dr. Kelsey Hudson
2001-01-17 19:22 ` Werner Almesberger
2001-01-17 20:32 ` Matti Aarnio
2001-01-17 20:46 ` Werner Almesberger
2001-01-17 21:26 ` Dr. Kelsey Hudson
2001-01-16 16:35 Venkatesh Ramamurthy
2001-01-16 17:04 ` Brian Gerst
2001-01-16 17:24 ` Eddie Williams
2001-01-16 18:22 ` Timur Tabi
2001-01-16 19:18 ` Matthew D. Pitts
2001-01-16 19:54 ` Christopher Friesen
2001-01-16 21:04 ` Timur Tabi
2001-01-16 22:51 ` Peter Samuelson
2001-01-16 16:19 Venkatesh Ramamurthy
2001-01-16 16:23 ` Florent Cueto
2001-01-16 16:31 ` Brian Gerst
2001-01-16 16:40 ` Dominik Kubla
2001-01-16 15:49 Venkatesh Ramamurthy
2001-01-16 16:06 ` David Woodhouse
2001-01-16 16:27 ` Arjan van de Ven
2001-01-16 16:40 ` Matthias Andree
2001-01-16 16:45 ` Douglas Gilbert
2001-01-16 17:38 ` Malahal Rao Naineni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200101161653.f0GGrl101735@aslan.sc.steeleye.com \
--to=eddie.williams@steeleye.com \
--cc=Venkateshr@ami.com \
--cc=arjan@fenrus.demon.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®