From: Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH wireless-next v4 04/21] wifi: cfg80211: define layouts for SMD BSS Transition context
Date: Wed, 18 Nov 2026 19:35:22 +0530 [thread overview]
Message-ID: <5164fc4a-76fc-430b-ad36-fe66fe22219a@oss.qualcomm.com> (raw)
In-Reply-To: <c9ffcbff38996a38c293105d8db526673e572acc.camel@sipsolutions.net>
On 11/16/2026 04:24 pm, Johannes Berg wrote:
> On Fri, 2026-11-13 at 23:45 +0530, Pooventhiran G wrote:
>>
>> On 11/11/2026 12:09 am, Johannes Berg wrote:
>>> On Fri, 2026-11-06 at 13:28 +0530, Pooventhiran G wrote:
>>>> IEEE P802.11bn/D2.0
>>>>
>>>
>>> It probably didn't change here, but there's D2.1 :)
>>>
>>
>> From the looks of it, D2.1 doesn't seem to modify the context layout but Dual
>> BA :)
>>
>>>> +#define IEEE80211_SMD_CTX_MAX_PN_LEN 16
>>>
>>> Huh?
>>>
>>
>> There is no cfg80211-equivalent for IEEE80211_MAX_PN_LEN as defined in mac80211.
>
> We could move it, but I was much more questioning the *value*.
>
Got it. 16-byte was kept because of the (wildcard) max value. But yes, doesn't
make sense here, I will change it to the standard size.
>>>> + * @buffer_size: Reorder buffer size from ADDBA Request (10-bit, max 1023)
>>>
>>> It's probably literally in this spec this way, but I see absolutely no
>>> reason to split it up like that (with ext_buffer_size) in what's
>>> effectively an internal API?!
>>>
>>
>> Buffer size was sent this way so that hostapd can directly use that to report
>> the DL BA Info and UL BA Info in the ST Preparation Response frame (Figure
>> 9-aa53 — Extended BA Parameters Info field format).
>>
>> I can combine these into one single @buffer_size and let hostapd split it for
>> preparing the OTA frame (as it is only needed there) but would still need to
>> send ext_no_frag and extfrag_level as part of the context. Would it be okay?
>
> Oh I was just thinking of why you were splitting the buffer size in
> internal APIs that way - much simpler to just have a single u16 (since
> we don't have C23 yet) value?
>
Sure, Johannes.
>>>> +/**
>>>> + * struct ieee80211_smd_ctx - IEEE 802.11bn SMD Roaming Context (refer
>>>> + * IEEE P802.11bn/D2.0, Aug 2026, subclause 37.16.9)
>>>> + *
>>>> + * @dl_sn_valid: if downlink (DL) SN Transfer is requested or not
>>>> + * @ul_sn_valid: if uplink (UL) SN Transfer is requested or not
>>>
>>> Hmm. It might make more sense to invert that like in the frames?
>>>
>>
>> Sure, will reorder this as UL, DL.
>
> Oh I didn't mean the _order_, I don't even know what the order was, I
> meant _invert_, i.e. "no_dl_sn_transfer" or something? That's how it's
> in the frames, IIRC.
>
Got it. Since it used to be a BITMAP, I visualized it as some sort of a
presence bitmap. Now that it has become valid bits, I can align the name with
spec text.
>>>> + * @pn_valid: if PN is transferred or not
>>>
>>> This being false is not a thing (any more)?
>>>
>>
>> PN is still defined to be transferred in the Prep context (at least as per
>> D2.0 37.16.9). Even if drivers choose to send this in the Exec context, it may
>> not be present in both Prep and Exec contexts? Should we make it so that PN is
>> transferred in both?
>
> Oh ... no strong opinion, but the documentation literally says "is
> transferred or not" and ... there's no "isn't transferred" option in the
> spec (any more).
>
Got it, will keep PN as an optional data in the context (because it might be
sent in one of Prep or Exec contexts) and update the doc properly.
>>
>>>> + * @ba_params_valid: if BlockAck parameters are transferred or not
>>>> + * @mgmt_tid_valid: if management information is transferred or not.
>>>> + * @{d,u}l.mgmt_sn and @ul.mgmt_pn are still bounded by @{d,u}l_sn_valid
>>>> + * and @pn_valid fields.
>>>> + * @pn_len: Length of PN in bytes; varies by cipher type
>>>> + * (e.g. CCMP (6), GCMP-256 (16))
>>>
>>> ??
>>>
>>
>> Especially while filling in the data in nl80211 to report to userspace or when
>> we parse the SET_SMD_CTX from userspace, this eliminates the dependency on
>> key_conf to derive the length from the cipher type. But is the preference here
>> exactly that?
>
> No, see above, what's with 16-byte PNs, there's no such thing.
>
> johannes
next prev parent reply other threads:[~2026-11-18 14:05 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 7:58 [PATCH wireless-next v4 00/21] wifi: Add Seamless Mobility Domain (SMD) AP support Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 01/21] wifi: nl80211: define Seamless Mobility Domain (SMD) device capability Pooventhiran G
2026-11-10 14:15 ` Johannes Berg
2026-11-10 14:26 ` Johannes Berg
2026-11-13 15:23 ` Pooventhiran G
2026-11-16 10:40 ` Johannes Berg
2026-11-18 13:54 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 02/21] wifi: nl80211/cfg80211: define interfaces for SMD setup and STA update Pooventhiran G
2026-11-10 18:18 ` Johannes Berg
2026-11-06 7:58 ` [PATCH wireless-next v4 03/21] wifi: nl80211: add SMD BSS Transition sub-state STA flags Pooventhiran G
2026-11-10 18:27 ` Johannes Berg
2026-11-16 10:21 ` Pooventhiran G
2026-11-16 10:50 ` Johannes Berg
2026-11-06 7:58 ` [PATCH wireless-next v4 04/21] wifi: cfg80211: define layouts for SMD BSS Transition context Pooventhiran G
2026-11-10 18:39 ` Johannes Berg
2026-11-13 18:15 ` Pooventhiran G
2026-11-16 10:54 ` Johannes Berg
2026-11-18 14:05 ` Pooventhiran G [this message]
2026-11-06 7:58 ` [PATCH wireless-next v4 05/21] wifi: nl80211: define interfaces for SMD BSS Transition context transfer Pooventhiran G
2026-11-10 18:45 ` Johannes Berg
2026-11-13 16:45 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 06/21] wifi: ieee80211: define APIs for UHR Link Reconfiguration frame checks Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 07/21] wifi: ieee80211: define API to check if frame is class 3 Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 08/21] wifi: nl80211/cfg80211: pack SMD dynamic context along with frame Pooventhiran G
2026-11-10 18:51 ` Johannes Berg
2026-11-13 18:17 ` Pooventhiran G
2026-11-16 11:00 ` Johannes Berg
2026-11-18 14:10 ` Pooventhiran G
2026-11-11 9:14 ` Allen Ye
2026-11-13 18:19 ` Pooventhiran G
2026-11-16 3:38 ` Allen Ye (葉芷勳)
2026-11-06 7:58 ` [PATCH wireless-next v4 09/21] wifi: nl80211/cfg80211: add support for SMD context programming Pooventhiran G
2026-11-10 18:55 ` Johannes Berg
2026-11-13 17:54 ` Pooventhiran G
2026-11-16 11:13 ` Johannes Berg
2026-11-18 14:14 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 10/21] wifi: nl80211/cfg80211: add support for querying SMD context for target AP MLD Pooventhiran G
2026-11-10 19:00 ` Johannes Berg
2026-11-13 18:33 ` Pooventhiran G
2026-11-16 11:20 ` Johannes Berg
2026-11-18 14:18 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 11/21] wifi: nl80211/cfg80211: define API to notify SMD Drain completion Pooventhiran G
2026-11-10 19:01 ` Johannes Berg
2026-11-13 18:38 ` Pooventhiran G
2026-11-16 11:23 ` Johannes Berg
2026-11-18 14:19 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 12/21] wifi: mac80211: set SMD parameters for AP setup and STA update Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 13/21] wifi: mac80211: apply SMD BSS Transition STA sub-states Pooventhiran G
2026-11-10 20:29 ` Johannes Berg
2026-11-13 18:46 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 14/21] wifi: mac80211: add driver_op for SMD substate changes Pooventhiran G
2026-11-10 20:38 ` Johannes Berg
2026-11-13 19:20 ` Pooventhiran G
2026-11-16 11:32 ` Johannes Berg
2026-11-18 14:25 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 15/21] wifi: mac80211: filter uplink and downlink frames based on SMD states Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 16/21] wifi: mac80211: send BlockAck policy in AMPDU action Pooventhiran G
2026-11-10 20:43 ` Johannes Berg
2026-11-16 10:50 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 17/21] wifi: mac80211: pass rx_data directly from ieee80211_rx_list() Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 18/21] wifi: mac80211: handle UHR Link Reconfiguration frame Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 19/21] wifi: mac80211: add mac80211 support to handle NL80211_CMD_SET_SMD_CTX Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 20/21] wifi: mac80211: add mac80211 support to handle NL80211_CMD_GET_SMD_CTX Pooventhiran G
2026-11-10 20:47 ` Johannes Berg
2026-11-13 19:22 ` Pooventhiran G
2026-11-06 7:58 ` [PATCH wireless-next v4 21/21] wifi: mac80211: define API to invoke SMD Drain Completion event Pooventhiran G
2026-11-10 20:49 ` Johannes Berg
2026-11-13 19:24 ` Pooventhiran G
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5164fc4a-76fc-430b-ad36-fe66fe22219a@oss.qualcomm.com \
--to=pooventhiran.g@oss.qualcomm.com \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®