[PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[Changhuang Liang]

The JHB100 SoC includes CRG (Clock and Reset Generator) for multiple
subsystems:

The JHB100 SoC is divided into multiple subsystems, and basically
each subsystem includes a CRG(Clock and Reset Generator):
 - sys0crg/sys1crg/sys2crg/
 - per0crg/per1crg/per2crg/per3crg/
 - voutcrg
 - vcecrg
 - gpu0crg/gpu1crg
 - cpucrg
 - usbcrg
 - host0crg/host1crg
 - pcierpcrg
 - husb0crg/husb1crg
 - husbcmncrg
 - husbd0crg/husbd1crg
 - npucrg

In the current series, we will only add the following CRG:
 - sys0crg/sys1crg/sys2crg/
 - per0crg/per1crg/per2crg/per3crg/

The remaining CRG will be implemented in future series.

This series depends on the series:
https://lore.kernel.org/all/20260806122553.182449-1-changhuang.liang@starfivetech.com/
and it has been tested on the StarFive JHB100 EVB-1.

changes since v4:
- Remove patches 1/2/3/4 in v4, and patches 1/2/3 are newly introduced in v5.
- Refactor the shared clock and reset implementation into JH71x0-specific helpers, updating
  the affected drivers (These include patches 4/6/8/10/12/14/16/18/20/21/22 in v5.) to use
  the new interfaces.
- Split patch 6 in v4 into patch 4 and patch 6 in the current v5.
- Split patch 21 in v4 into patch 21 and patch 22 in the current v5.

PATCH 17: (in v5)
- Add Krzysztof's Reviewed-by tag

v4: https://lore.kernel.org/all/20260920120044.194901-1-changhuang.liang@starfivetech.com/
v3: https://lore.kernel.org/all/20260807112923.191627-1-changhuang.liang@starfivetech.com/
v2: https://lore.kernel.org/all/20260508053632.818548-1-changhuang.liang@starfivetech.com/
v1: https://lore.kernel.org/all/20260402105523.447523-1-changhuang.liang@starfivetech.com/

Changhuang Liang (23):
  clk: starfive: jh7110-sys: Fix memory leak in reset controller
    register
  clk: starfive: JH71x0: Move reset controller registration to jh71x0
    common code
  reset: starfive: jh7110: Match auxiliary device names to jh71x0 clk
    driver
  clk: starfive: jh71x0: Add generic CRG probe helper
  dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset
    generator
  clk: starfive: Add JHB100 System-0 clock generator driver
  dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset
    generator
  clk: starfive: Add JHB100 System-1 clock generator driver
  dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset
    generator
  clk: starfive: Add JHB100 System-2 clock generator driver
  dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset
    generator
  clk: starfive: Introduce idiv ops for inverted divider clocks
  clk: starfive: Expand the storage of clock parent index
  clk: starfive: Add StarFive JHB100 Peripheral-0 clock driver
  dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset
    generator
  clk: starfive: Add StarFive JHB100 Peripheral-1 clock driver
  dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset
    generator
  clk: starfive: Add StarFive JHB100 Peripheral-2 clock driver
  dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset
    generator
  clk: starfive: Add StarFive JHB100 Peripheral-3 clock driver
  reset: starfive: jh71x0: Support discontiguous reset IDs
  reset: starfive: Add StarFive JHB100 reset driver
  riscv: dts: starfive: jhb100: Add clocks and resets nodes

 .../clock/starfive,jhb100-per0crg.yaml        |  70 ++
 .../clock/starfive,jhb100-per1crg.yaml        |  70 ++
 .../clock/starfive,jhb100-per2crg.yaml        |  76 +++
 .../clock/starfive,jhb100-per3crg.yaml        |  76 +++
 .../clock/starfive,jhb100-sys0crg.yaml        |  63 ++
 .../clock/starfive,jhb100-sys1crg.yaml        |  71 +++
 .../clock/starfive,jhb100-sys2crg.yaml        |  64 ++
 MAINTAINERS                                   |  13 +
 arch/riscv/boot/dts/starfive/jhb100.dtsi      | 198 +++++-
 drivers/clk/starfive/Kconfig                  |  72 ++-
 drivers/clk/starfive/Makefile                 |   8 +
 .../clk/starfive/clk-starfive-jh7110-aon.c    |   2 +-
 .../clk/starfive/clk-starfive-jh7110-isp.c    |   2 +-
 .../clk/starfive/clk-starfive-jh7110-stg.c    |   2 +-
 .../clk/starfive/clk-starfive-jh7110-sys.c    |  57 +-
 .../clk/starfive/clk-starfive-jh7110-vout.c   |   2 +-
 drivers/clk/starfive/clk-starfive-jh7110.h    |   4 -
 drivers/clk/starfive/clk-starfive-jh71x0.c    | 161 ++++-
 drivers/clk/starfive/clk-starfive-jh71x0.h    |  24 +-
 .../clk/starfive/clk-starfive-jhb100-per0.c   | 599 ++++++++++++++++++
 .../clk/starfive/clk-starfive-jhb100-per1.c   | 149 +++++
 .../clk/starfive/clk-starfive-jhb100-per2.c   | 174 +++++
 .../clk/starfive/clk-starfive-jhb100-per3.c   | 132 ++++
 .../clk/starfive/clk-starfive-jhb100-sys0.c   | 150 +++++
 .../clk/starfive/clk-starfive-jhb100-sys1.c   | 105 +++
 .../clk/starfive/clk-starfive-jhb100-sys2.c   | 129 ++++
 drivers/reset/starfive/Kconfig                |   9 +
 drivers/reset/starfive/Makefile               |   1 +
 .../reset/starfive/reset-starfive-jh7110.c    |  10 +-
 .../reset/starfive/reset-starfive-jh71x0.c    |  99 ++-
 .../reset/starfive/reset-starfive-jh71x0.h    |  19 +
 .../reset/starfive/reset-starfive-jhb100.c    | 302 +++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 542 ++++++++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 186 ++++++
 34 files changed, 3553 insertions(+), 88 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per0.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per1.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per2.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per3.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys0.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys1.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys2.c
 create mode 100644 drivers/reset/starfive/reset-starfive-jhb100.c
 create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
 create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h

--
2.25.1

[PATCH v5 01/23] clk: starfive: jh7110-sys: Fix memory leak in reset controller register

[Changhuang Liang]

auxiliary_device_init() returns an error before device_initialize() is
called, so the release callback never runs on this path and the rdev
allocated in jh7110_reset_controller_register() is leaked.

Free rdev when auxiliary_device_init() fails.

Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/clk-starfive-jh7110-sys.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
index 847c0a39e5ab..1d460a03f936 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
@@ -360,8 +360,10 @@ int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
 	adev->id = adev_id;
 
 	ret = auxiliary_device_init(adev);
-	if (ret)
+	if (ret) {
+		kfree(rdev);
 		return ret;
+	}
 
 	ret = auxiliary_device_add(adev);
 	if (ret) {
-- 
2.25.1

[PATCH v5 02/23] clk: starfive: JH71x0: Move reset controller registration to jh71x0 common code

[Changhuang Liang]

jh7110_reset_controller_register() is only tied to the JH7110 system
clock driver by its location. Its logic is generic: allocate a
struct jh71x0_reset_adev, point it at the CRG register base and add it
as an auxiliary device for the reset driver to bind to.

Move it to clk-starfive-jh71x0.c as jh71x0_reset_controller_register()
so that the clock drivers of other StarFive SoCs can reuse it, and make
CLK_STARFIVE_JH71X0 select AUXILIARY_BUS accordingly.

The auxiliary device ID is dropped: every CRG already uses a distinct
auxiliary device name, so the ID is not needed to keep the device names
unique, and it is always 0 now.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  2 +-
 .../clk/starfive/clk-starfive-jh7110-aon.c    |  2 +-
 .../clk/starfive/clk-starfive-jh7110-isp.c    |  2 +-
 .../clk/starfive/clk-starfive-jh7110-stg.c    |  2 +-
 .../clk/starfive/clk-starfive-jh7110-sys.c    | 59 +------------------
 .../clk/starfive/clk-starfive-jh7110-vout.c   |  2 +-
 drivers/clk/starfive/clk-starfive-jh7110.h    |  4 --
 drivers/clk/starfive/clk-starfive-jh71x0.c    | 54 +++++++++++++++++
 drivers/clk/starfive/clk-starfive-jh71x0.h    |  2 +
 9 files changed, 62 insertions(+), 67 deletions(-)

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index bd29358ffeec..51716655554f 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -2,6 +2,7 @@
 
 config CLK_STARFIVE_JH71X0
 	bool
+	select AUXILIARY_BUS
 
 config CLK_STARFIVE_JH7100
 	bool "StarFive JH7100 clock support"
@@ -32,7 +33,6 @@ config CLK_STARFIVE_JH7110_PLL
 config CLK_STARFIVE_JH7110_SYS
 	bool "StarFive JH7110 system clock support"
 	depends on ARCH_STARFIVE || COMPILE_TEST
-	select AUXILIARY_BUS
 	select CLK_STARFIVE_JH71X0
 	select RESET_STARFIVE_JH7110 if RESET_CONTROLLER
 	select CLK_STARFIVE_JH7110_PLL
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-aon.c b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
index 6f67587f4335..66f1c56a7169 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-aon.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-aon.c
@@ -121,7 +121,7 @@ static int jh7110_aoncrg_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	return jh7110_reset_controller_register(priv, "rst-aon", 1);
+	return jh71x0_reset_controller_register(priv, "rst-aon");
 }
 
 static const struct of_device_id jh7110_aoncrg_match[] = {
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-isp.c b/drivers/clk/starfive/clk-starfive-jh7110-isp.c
index c02c8b29a123..f8222d3c81ee 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-isp.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-isp.c
@@ -180,7 +180,7 @@ static int jh7110_ispcrg_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_exit;
 
-	ret = jh7110_reset_controller_register(priv, "rst-isp", 3);
+	ret = jh71x0_reset_controller_register(priv, "rst-isp");
 	if (ret)
 		goto err_exit;
 
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-stg.c b/drivers/clk/starfive/clk-starfive-jh7110-stg.c
index 2a5ad0e07d1d..5ae63e18aa4f 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-stg.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-stg.c
@@ -139,7 +139,7 @@ static int jh7110_stgcrg_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	return jh7110_reset_controller_register(priv, "rst-stg", 2);
+	return jh71x0_reset_controller_register(priv, "rst-stg");
 }
 
 static const struct of_device_id jh7110_stgcrg_match[] = {
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
index 1d460a03f936..6c5e9c54dfcd 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
@@ -6,15 +6,11 @@
  * Copyright (C) 2022 StarFive Technology Co., Ltd.
  */
 
-#include <linux/auxiliary_bus.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <soc/starfive/reset-starfive-jh71x0.h>
 
 #include <dt-bindings/clock/starfive,jh7110-crg.h>
 
@@ -323,59 +319,6 @@ static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = {
 		    JH7110_SYSCLK_OSC),
 };
 
-static void jh7110_reset_unregister_adev(void *_adev)
-{
-	struct auxiliary_device *adev = _adev;
-
-	auxiliary_device_delete(adev);
-	auxiliary_device_uninit(adev);
-}
-
-static void jh7110_reset_adev_release(struct device *dev)
-{
-	struct auxiliary_device *adev = to_auxiliary_dev(dev);
-	struct jh71x0_reset_adev *rdev = to_jh71x0_reset_adev(adev);
-
-	kfree(rdev);
-}
-
-int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
-				     const char *adev_name,
-				     u32 adev_id)
-{
-	struct jh71x0_reset_adev *rdev;
-	struct auxiliary_device *adev;
-	int ret;
-
-	rdev = kzalloc_obj(*rdev);
-	if (!rdev)
-		return -ENOMEM;
-
-	rdev->base = priv->base;
-
-	adev = &rdev->adev;
-	adev->name = adev_name;
-	adev->dev.parent = priv->dev;
-	adev->dev.release = jh7110_reset_adev_release;
-	adev->id = adev_id;
-
-	ret = auxiliary_device_init(adev);
-	if (ret) {
-		kfree(rdev);
-		return ret;
-	}
-
-	ret = auxiliary_device_add(adev);
-	if (ret) {
-		auxiliary_device_uninit(adev);
-		return ret;
-	}
-
-	return devm_add_action_or_reset(priv->dev,
-					jh7110_reset_unregister_adev, adev);
-}
-EXPORT_SYMBOL_GPL(jh7110_reset_controller_register);
-
 /*
  * This clock notifier is called when the rate of PLL0 clock is to be changed.
  * The cpu_root clock should save the current parent clock and switch its parent
@@ -525,7 +468,7 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	return jh7110_reset_controller_register(priv, "rst-sys", 0);
+	return jh71x0_reset_controller_register(priv, "rst-sys");
 }
 
 static const struct of_device_id jh7110_syscrg_match[] = {
diff --git a/drivers/clk/starfive/clk-starfive-jh7110-vout.c b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
index aeba42cd3c44..14e5b8286671 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-vout.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
@@ -189,7 +189,7 @@ static int jh7110_voutcrg_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_exit;
 
-	ret = jh7110_reset_controller_register(priv, "rst-vo", 4);
+	ret = jh71x0_reset_controller_register(priv, "rst-vo");
 	if (ret)
 		goto err_exit;
 
diff --git a/drivers/clk/starfive/clk-starfive-jh7110.h b/drivers/clk/starfive/clk-starfive-jh7110.h
index 0659adae4d76..55374ee24d4d 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110.h
+++ b/drivers/clk/starfive/clk-starfive-jh7110.h
@@ -10,8 +10,4 @@ struct jh7110_top_sysclk {
 	int top_clks_num;
 };
 
-int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
-				     const char *adev_name,
-				     u32 adev_id);
-
 #endif
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index 80e9157347eb..2cc71f49ddee 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -5,10 +5,13 @@
  * Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk>
  */
 
+#include <linux/auxiliary_bus.h>
 #include <linux/clk-provider.h>
 #include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <soc/starfive/reset-starfive-jh71x0.h>
 
 #include "clk-starfive-jh71x0.h"
 
@@ -337,3 +340,54 @@ struct clk_hw *jh71x0_clk_get(struct of_phandle_args *clkspec, void *data)
 	return ERR_PTR(-EINVAL);
 }
 EXPORT_SYMBOL_GPL(jh71x0_clk_get);
+
+static void jh71x0_reset_unregister_adev(void *_adev)
+{
+	struct auxiliary_device *adev = _adev;
+
+	auxiliary_device_delete(adev);
+	auxiliary_device_uninit(adev);
+}
+
+static void jh71x0_reset_adev_release(struct device *dev)
+{
+	struct auxiliary_device *adev = to_auxiliary_dev(dev);
+	struct jh71x0_reset_adev *rdev = to_jh71x0_reset_adev(adev);
+
+	kfree(rdev);
+}
+
+int jh71x0_reset_controller_register(struct jh71x0_clk_priv *priv,
+				     const char *adev_name)
+{
+	struct jh71x0_reset_adev *rdev;
+	struct auxiliary_device *adev;
+	int ret;
+
+	rdev = kzalloc_obj(*rdev);
+	if (!rdev)
+		return -ENOMEM;
+
+	rdev->base = priv->base;
+
+	adev = &rdev->adev;
+	adev->name = adev_name;
+	adev->dev.parent = priv->dev;
+	adev->dev.release = jh71x0_reset_adev_release;
+
+	ret = auxiliary_device_init(adev);
+	if (ret) {
+		kfree(rdev);
+		return ret;
+	}
+
+	ret = auxiliary_device_add(adev);
+	if (ret) {
+		auxiliary_device_uninit(adev);
+		return ret;
+	}
+
+	return devm_add_action_or_reset(priv->dev,
+					jh71x0_reset_unregister_adev, adev);
+}
+EXPORT_SYMBOL_GPL(jh71x0_reset_controller_register);
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
index 9d5dec1d5cd1..322a05157faf 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.h
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
@@ -123,5 +123,7 @@ struct jh71x0_clk_priv {
 
 const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
 struct clk_hw *jh71x0_clk_get(struct of_phandle_args *clkspec, void *data);
+int jh71x0_reset_controller_register(struct jh71x0_clk_priv *priv,
+				     const char *adev_name);
 
 #endif
-- 
2.25.1

[PATCH v5 03/23] reset: starfive: jh7110: Match auxiliary device names to jh71x0 clk driver

[Changhuang Liang]

The JH7110 reset driver binds to auxiliary devices created by the
StarFive clock driver. As part of moving the reset controller registration
helper into clk-starfive-jh71x0.c so that it can be shared by other
StarFive SoCs, the auxiliary device names are now prefixed with
"clk_starfive_jh71x0" instead of "clk_starfive_jh7110_sys".

Update the auxiliary_device_id table accordingly, otherwise the reset
driver fails to probe.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/reset/starfive/reset-starfive-jh7110.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c
index 29a43f0f2ad6..c936e61156a2 100644
--- a/drivers/reset/starfive/reset-starfive-jh7110.c
+++ b/drivers/reset/starfive/reset-starfive-jh7110.c
@@ -69,23 +69,23 @@ static int jh7110_reset_probe(struct auxiliary_device *adev,
 
 static const struct auxiliary_device_id jh7110_reset_ids[] = {
 	{
-		.name = "clk_starfive_jh7110_sys.rst-sys",
+		.name = "clk_starfive_jh71x0.rst-sys",
 		.driver_data = (kernel_ulong_t)&jh7110_sys_info,
 	},
 	{
-		.name = "clk_starfive_jh7110_sys.rst-aon",
+		.name = "clk_starfive_jh71x0.rst-aon",
 		.driver_data = (kernel_ulong_t)&jh7110_aon_info,
 	},
 	{
-		.name = "clk_starfive_jh7110_sys.rst-stg",
+		.name = "clk_starfive_jh71x0.rst-stg",
 		.driver_data = (kernel_ulong_t)&jh7110_stg_info,
 	},
 	{
-		.name = "clk_starfive_jh7110_sys.rst-isp",
+		.name = "clk_starfive_jh71x0.rst-isp",
 		.driver_data = (kernel_ulong_t)&jh7110_isp_info,
 	},
 	{
-		.name = "clk_starfive_jh7110_sys.rst-vo",
+		.name = "clk_starfive_jh71x0.rst-vo",
 		.driver_data = (kernel_ulong_t)&jh7110_vout_info,
 	},
 	{ /* sentinel */ }
-- 
2.25.1

[PATCH v5 04/23] clk: starfive: jh71x0: Add generic CRG probe helper

[Changhuang Liang]

The StarFive JHB100 SoC has several clock and reset generators (CRGs)
which share the same probe flow: map the registers, register all the
clocks described by a table, add the clock provider and register the
auxiliary reset device.

Add jh71x0_crg_probe() together with struct jh71x0_crg_domain_info so
that each CRG driver only needs to provide its clock table, external
clock names and reset auxiliary device name. The reset auxiliary device
is registered with jh71x0_reset_controller_register().

The clock index space of these CRGs is sparse, so also make
jh71x0_clk_get() reject indexes that were never registered when the
domain info is available.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/clk-starfive-jh71x0.c | 95 +++++++++++++++++++++-
 drivers/clk/starfive/clk-starfive-jh71x0.h | 12 +++
 2 files changed, 104 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index 2cc71f49ddee..bb7706ede1a6 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/io.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <soc/starfive/reset-starfive-jh71x0.h>
 
@@ -334,10 +335,14 @@ struct clk_hw *jh71x0_clk_get(struct of_phandle_args *clkspec, void *data)
 	struct jh71x0_clk_priv *priv = data;
 	unsigned int idx = clkspec->args[0];
 
-	if (idx < priv->num_reg)
-		return &priv->reg[idx].hw;
+	if (idx >= priv->num_reg)
+		return ERR_PTR(-EINVAL);
 
-	return ERR_PTR(-EINVAL);
+	/* Index space is sparse: reject holes that were never registered. */
+	if (priv->info && !priv->info->clk_data[idx].name)
+		return ERR_PTR(-ENOENT);
+
+	return &priv->reg[idx].hw;
 }
 EXPORT_SYMBOL_GPL(jh71x0_clk_get);
 
@@ -391,3 +396,87 @@ int jh71x0_reset_controller_register(struct jh71x0_clk_priv *priv,
 					jh71x0_reset_unregister_adev, adev);
 }
 EXPORT_SYMBOL_GPL(jh71x0_reset_controller_register);
+
+int jh71x0_crg_probe(struct platform_device *pdev)
+{
+	const struct jh71x0_crg_domain_info *info;
+	struct jh71x0_clk_priv *priv;
+	unsigned int idx;
+	int ret;
+
+	info = device_get_match_data(&pdev->dev);
+	if (!info)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, reg, info->num_clk),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->rmw_lock);
+	priv->info = info;
+	priv->num_reg = info->num_clk;
+	priv->dev = &pdev->dev;
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	if (info->power_domain) {
+		ret = devm_pm_runtime_enable(priv->dev);
+		if (ret)
+			return dev_err_probe(priv->dev, ret,
+					     "failed to enable runtime PM\n");
+	}
+
+	for (idx = 0; idx < info->num_clk; idx++) {
+		u32 max = info->clk_data[idx].max;
+		struct clk_parent_data parents[4] = {};
+		struct clk_init_data init = {
+			.name = info->clk_data[idx].name,
+			.ops = starfive_jh71x0_clk_ops(max),
+			.parent_data = parents,
+			.num_parents =
+				((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
+			.flags = info->clk_data[idx].flags,
+		};
+		struct jh71x0_clk *clk = &priv->reg[idx];
+		unsigned int i;
+
+		if (!init.name)
+			continue;
+
+		if (init.num_parents > ARRAY_SIZE(parents))
+			return dev_err_probe(priv->dev, -EINVAL,
+					     "clock %s: too many parents (%u > %zu)\n",
+					     init.name, init.num_parents, ARRAY_SIZE(parents));
+
+		for (i = 0; i < init.num_parents; i++) {
+			unsigned int pidx = info->clk_data[idx].parents[i];
+
+			if (pidx < info->num_clk) {
+				parents[i].hw = &priv->reg[pidx].hw;
+			} else {
+				if (pidx - info->num_clk >= info->num_ext_clk)
+					return -EINVAL;
+
+				parents[i].fw_name = info->ext_clk[pidx - info->num_clk];
+			}
+		}
+
+		clk->hw.init = &init;
+		clk->idx = idx;
+		clk->max_div = max & JH71X0_CLK_DIV_MASK;
+
+		ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
+		if (ret)
+			return dev_err_probe(priv->dev, ret, "Failed to register clock %s\n",
+					     init.name);
+	}
+
+	ret = devm_of_clk_add_hw_provider(&pdev->dev, jh71x0_clk_get, priv);
+	if (ret)
+		return ret;
+
+	return jh71x0_reset_controller_register(priv, info->rst_name);
+}
+EXPORT_SYMBOL_GPL(jh71x0_crg_probe);
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
index 322a05157faf..2a1f0fb4cbb1 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.h
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
@@ -5,6 +5,7 @@
 #include <linux/bits.h>
 #include <linux/clk-provider.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
 /* register fields */
@@ -109,6 +110,15 @@ struct jh71x0_clk {
 	unsigned int max_div;
 };
 
+struct jh71x0_crg_domain_info {
+	const struct jh71x0_clk_data *clk_data;
+	unsigned int num_clk;
+	const char * const *ext_clk;
+	unsigned int num_ext_clk;
+	const char *rst_name;
+	bool power_domain;
+};
+
 struct jh71x0_clk_priv {
 	/* protect clk enable and set rate/parent from happening at the same time */
 	spinlock_t rmw_lock;
@@ -116,6 +126,7 @@ struct jh71x0_clk_priv {
 	void __iomem *base;
 	struct clk *original_clk;
 	struct notifier_block pll_clk_nb;
+	const struct jh71x0_crg_domain_info *info;
 	struct clk_hw *pll[3];
 	unsigned int num_reg;
 	struct jh71x0_clk reg[] __counted_by(num_reg);
@@ -125,5 +136,6 @@ const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
 struct clk_hw *jh71x0_clk_get(struct of_phandle_args *clkspec, void *data);
 int jh71x0_reset_controller_register(struct jh71x0_clk_priv *priv,
 				     const char *adev_name);
+int jh71x0_crg_probe(struct platform_device *pdev);
 
 #endif
-- 
2.25.1

[PATCH v5 05/23] dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator

[Changhuang Liang]

Add bindings for the System-0 clocks and reset generator (SYS0CRG) on
JHB100 SoC.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../clock/starfive,jhb100-sys0crg.yaml        | 63 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 56 +++++++++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 28 +++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
 create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
 create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
new file mode 100644
index 000000000000..cf1b0175b158
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-sys0crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 System-0 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-sys0crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (25 MHz)
+      - description: PLL0
+      - description: PLL1
+      - description: PLL2
+
+  clock-names:
+    items:
+      - const: osc
+      - const: pll0
+      - const: pll1
+      - const: pll2
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13000000 {
+      compatible = "starfive,jhb100-sys0crg";
+      reg = <0x13000000 0x4000>;
+      clocks = <&osc>, <&pll0>, <&pll1>,
+               <&syspll 0>;
+      clock-names = "osc", "pll0", "pll1", "pll2";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
new file mode 100644
index 000000000000..24ef2663f05a
--- /dev/null
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__
+#define __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__
+
+/* SYS0CRG clocks */
+#define JHB100_SYS0CLK_BMCPCIERP_NCNOC_MAIN		17
+#define JHB100_SYS0CLK_BMCPCIERP_NCNOC_CFG		18
+
+#define JHB100_SYS0CLK_PCIE_REF_CML			20
+#define JHB100_SYS0CLK_BMCPCIERP_NCNOC_DATA_INIT	21
+#define JHB100_SYS0CLK_BMCPCIERP_NCNOC_CFG_INIT		22
+#define JHB100_SYS0CLK_BMCPCIERP_NCNOC_TARG		23
+
+#define JHB100_SYS0CLK_BMCPCIERP_PCU			26
+#define JHB100_SYS0CLK_HOSTSS0_NCNOC_CFG		27
+#define JHB100_SYS0CLK_HOSTSS0_NCNOC_DATA		28
+#define JHB100_SYS0CLK_HOSTSS0_PHY_SCAN_400		29
+#define JHB100_SYS0CLK_GPIO_ESPI0_EXT			30
+
+#define JHB100_SYS0CLK_BMCUSB_NCNOC_INIT		34
+#define JHB100_SYS0CLK_BMCUSB_NCNOC_TARG		35
+#define JHB100_SYS0CLK_BMCUSB_SCANCLK			36
+#define JHB100_SYS0CLK_BMCUSB_480M_SCANCLK		37
+
+#define JHB100_SYS0CLK_VCE_NCNOC_INIT			50
+#define JHB100_SYS0CLK_VCE_NCNOC_TARG			51
+#define JHB100_SYS0CLK_BMCPER2_NCNOC_INIT		52
+#define JHB100_SYS0CLK_BMCPER2_NCNOC_TARG		53
+#define JHB100_SYS0CLK_BMCPER2_CFG_400			54
+#define JHB100_SYS0CLK_BMCPER2_CFG_125			55
+
+#define JHB100_SYS0CLK_HOSTSS1_NCNOC_DATA		58
+#define JHB100_SYS0CLK_HOSTSS1_PHY_SCAN_400		59
+#define JHB100_SYS0CLK_HOSTSS1_PHY_SCAN_400_ICG_BUF	60
+#define JHB100_SYS0CLK_NPU_NCNOC_INIT			61
+#define JHB100_SYS0CLK_VOUT_NCNOC_INIT			62
+#define JHB100_SYS0CLK_VOUT_AUX				63
+
+#define JHB100_SYS0CLK_BMCPER3_NCNOC_INIT		65
+#define JHB100_SYS0CLK_HOSTUSB_NCNOC_INIT		66
+#define JHB100_SYS0CLK_HOSTUSBCMN_CFG_480		67
+#define JHB100_SYS0CLK_BMCPER1_NCNOC_INIT		68
+#define JHB100_SYS0CLK_BMCPER1_CFG_800			69
+#define JHB100_SYS0CLK_BMCPER0_NCNOC_INIT		70
+#define JHB100_SYS0CLK_BMCPER0_CFG_400			71
+#define JHB100_SYS0CLK_BMCPER0_CFG_800			72
+#define JHB100_SYS0CLK_GPU0_NCNOC_INIT			73
+#define JHB100_SYS0CLK_GPU1_NCNOC_INIT			74
+
+#endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
new file mode 100644
index 000000000000..5c7b00afda73
--- /dev/null
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__
+#define __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__
+
+/* SYS0CRG resets */
+#define JHB100_SYS0RST_RESOURCE_ARB					0
+#define JHB100_SYS0RST_SYS0_IOMUX_PRESETN				1
+#define JHB100_SYS0RST_SYS0H_IOMUX_PRESETN				2
+#define JHB100_SYS0RST_RST_ADAPTOR_TIMEOUT_RSTN				3
+#define JHB100_SYS0RST_BMCPCIERP_RSTN_BUS				4
+#define JHB100_SYS0RST_BMCPCIERP_RSTN_CRG				5
+#define JHB100_SYS0RST_HOSTSS0_RSTN_BUS_ESPI				6
+#define JHB100_SYS0RST_HOSTSS0_RSTN_BUS_PCIE				7
+#define JHB100_SYS0RST_HOSTSS0_RSTN_CRG					8
+#define JHB100_SYS0RST_BMCPERIPH2_RSTN_CRG				9
+#define JHB100_SYS0RST_BMCPERIPH2_RSTN_BUS				10
+#define JHB100_SYS0RST_VCE_RSTN_CRG					11
+#define JHB100_SYS0RST_VCE_RSTN_BUS					12
+#define JHB100_SYS0RST_BMCUSB_RSTN_BUS					13
+#define JHB100_SYS0RST_BMCUSB_RSTN_CRG					14
+
+#endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 06/23] clk: starfive: Add JHB100 System-0 clock generator driver

[Changhuang Liang]

Add support for JHB100 System-0 clock generator (SYS0CRG).

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 MAINTAINERS                                   |   7 +
 drivers/clk/starfive/Kconfig                  |  10 ++
 drivers/clk/starfive/Makefile                 |   2 +
 .../clk/starfive/clk-starfive-jhb100-sys0.c   | 150 ++++++++++++++++++
 4 files changed, 169 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys0.c

diff --git a/MAINTAINERS b/MAINTAINERS
index c9f542965ec5..d22078bcf488 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26217,6 +26217,13 @@ F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
 F:	drivers/phy/starfive/phy-jh7110-pcie.c
 F:	drivers/phy/starfive/phy-jh7110-usb.c
 
+STARFIVE JHB100 CLOCK DRIVERS
+M:	Changhuang Liang <changhuang.liang@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/clock/starfive,jhb1*.yaml
+F:	drivers/clk/starfive/clk-starfive-jhb1*
+F:	include/dt-bindings/clock/starfive,jhb1*.h
+
 STARFIVE JHB100 DEVICETREES
 M:	Changhuang Liang <changhuang.liang@starfivetech.com>
 L:	linux-riscv@lists.infradead.org
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 51716655554f..cd5b7754403e 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -72,3 +72,13 @@ config CLK_STARFIVE_JH7110_VOUT
 	help
 	  Say yes here to support the Video-Output clock controller
 	  on the StarFive JH7110 SoC.
+
+config CLK_STARFIVE_JHB100_SYS0
+	bool "StarFive JHB100 system-0 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the system-0 clock controller on the
+	  StarFive JHB100 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 199ac0f37a2f..d2ba83d7d02c 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_AON)	+= clk-starfive-jh7110-aon.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_STG)	+= clk-starfive-jh7110-stg.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)	+= clk-starfive-jh7110-isp.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
+
+obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-sys0.c b/drivers/clk/starfive/clk-starfive-jhb100-sys0.c
new file mode 100644
index 000000000000..498afb787311
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-sys0.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 System-0 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_SYS0CLK_NUM_CLKS			(JHB100_SYS0CLK_GPU1_NCNOC_INIT + 1)
+
+/* external clocks */
+#define JHB100_SYS0CLK_OSC			(JHB100_SYS0CLK_NUM_CLKS + 0)
+#define JHB100_SYS0CLK_PLL0			(JHB100_SYS0CLK_NUM_CLKS + 1)
+#define JHB100_SYS0CLK_PLL1			(JHB100_SYS0CLK_NUM_CLKS + 2)
+#define JHB100_SYS0CLK_PLL2			(JHB100_SYS0CLK_NUM_CLKS + 3)
+
+static const char * const jhb100_sys0_ext_clk[] = {
+	"osc",
+	"pll0",
+	"pll1",
+	"pll2",
+};
+
+static const struct jh71x0_clk_data jhb100_sys0crg_clk_data[] = {
+	/* bmcpcierp */
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPCIERP_NCNOC_MAIN, "bmcpcierp_ncnoc_main", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPCIERP_NCNOC_CFG, "bmcpcierp_ncnoc_cfg", 12,
+		    JHB100_SYS0CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS0CLK_PCIE_REF_CML, "pcie_ref_cml", 24,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0_GATE(JHB100_SYS0CLK_BMCPCIERP_NCNOC_DATA_INIT, "bmcpcierp_ncnoc_data_init",
+		    CLK_IS_CRITICAL, JHB100_SYS0CLK_BMCPCIERP_NCNOC_MAIN),
+	JH71X0_GATE(JHB100_SYS0CLK_BMCPCIERP_NCNOC_CFG_INIT, "bmcpcierp_ncnoc_cfg_init",
+		    CLK_IS_CRITICAL, JHB100_SYS0CLK_BMCPCIERP_NCNOC_CFG),
+	JH71X0_GATE(JHB100_SYS0CLK_BMCPCIERP_NCNOC_TARG, "bmcpcierp_ncnoc_targ",
+		    CLK_IS_CRITICAL, JHB100_SYS0CLK_BMCPCIERP_NCNOC_MAIN),
+	JH71X0_GATE(JHB100_SYS0CLK_BMCPCIERP_PCU, "bmcpcierp_pcu",
+		    CLK_IS_CRITICAL, JHB100_SYS0CLK_OSC),
+	/* hostss0 */
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTSS0_NCNOC_CFG, "hostss0_ncnoc_cfg", 12,
+		    JHB100_SYS0CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTSS0_NCNOC_DATA, "hostss0_ncnoc_data", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTSS0_PHY_SCAN_400, "hostss0_phy_scan_400", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_GPIO_ESPI0_EXT, "gpio_espi0_ext", 14,
+		    JHB100_SYS0CLK_PLL2),
+	/* bmcusb */
+	JH71X0__DIV(JHB100_SYS0CLK_BMCUSB_NCNOC_INIT, "bmcusb_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCUSB_NCNOC_TARG, "bmcusb_ncnoc_targ", 6,
+		    JHB100_SYS0CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCUSB_SCANCLK, "bmcusb_scanclk", 5,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0_GATE(JHB100_SYS0CLK_BMCUSB_480M_SCANCLK, "bmcusb_480m_scanclk",
+		    CLK_IS_CRITICAL, JHB100_SYS0CLK_BMCUSB_SCANCLK),
+	/* vce */
+	JH71X0__DIV(JHB100_SYS0CLK_VCE_NCNOC_INIT, "vce_ncnoc_init", 10,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_VCE_NCNOC_TARG, "vce_ncnoc_targ", 12,
+		    JHB100_SYS0CLK_PLL1),
+	/* bmcperiph2 */
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER2_NCNOC_INIT, "bmcper2_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER2_NCNOC_TARG, "bmcper2_ncnoc_targ", 12,
+		    JHB100_SYS0CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER2_CFG_400, "bmcper2_cfg_400", 8,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER2_CFG_125, "bmcper2_cfg_125", 10,
+		    JHB100_SYS0CLK_PLL1),
+	/* hostss1 */
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTSS1_NCNOC_DATA, "hostss1_ncnoc_data", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTSS1_PHY_SCAN_400, "hostss1_phy_scan_400", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0_GATE(JHB100_SYS0CLK_HOSTSS1_PHY_SCAN_400_ICG_BUF,
+		    "hostss1_phy_scan_400_icg_buf", CLK_IS_CRITICAL,
+		    JHB100_SYS0CLK_HOSTSS1_PHY_SCAN_400),
+	/* npu */
+	JH71X0__DIV(JHB100_SYS0CLK_NPU_NCNOC_INIT, "npu_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	/* vout */
+	JH71X0__DIV(JHB100_SYS0CLK_VOUT_NCNOC_INIT, "vout_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_VOUT_AUX, "vout_aux", 150,
+		    JHB100_SYS0CLK_PLL0),
+	/* bmcperiph3 */
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER3_NCNOC_INIT, "bmcper3_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	/* hostusb */
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTUSB_NCNOC_INIT, "hostusb_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	/* hostusbcmn */
+	JH71X0__DIV(JHB100_SYS0CLK_HOSTUSBCMN_CFG_480, "hostusbcmn_cfg_480", 5,
+		    JHB100_SYS0CLK_PLL0),
+	/* bmcperiph1 */
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER1_NCNOC_INIT, "bmcper1_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER1_CFG_800, "bmcper1_cfg_800", 4,
+		    JHB100_SYS0CLK_PLL0),
+	/* bmcperiph0 */
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER0_NCNOC_INIT, "bmcper0_ncnoc_init", 6,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER0_CFG_400, "bmcper0_cfg_400", 8,
+		    JHB100_SYS0CLK_PLL0),
+	JH71X0__DIV(JHB100_SYS0CLK_BMCPER0_CFG_800, "bmcper0_cfg_800", 8,
+		    JHB100_SYS0CLK_PLL0),
+	/* gpu0 */
+	JH71X0__DIV(JHB100_SYS0CLK_GPU0_NCNOC_INIT, "gpu0_ncnoc_init", 10,
+		    JHB100_SYS0CLK_PLL0),
+	/* gpu1 */
+	JH71X0__DIV(JHB100_SYS0CLK_GPU1_NCNOC_INIT, "gpu1_ncnoc_init", 10,
+		    JHB100_SYS0CLK_PLL0),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_sys0crg_info = {
+	.clk_data	= jhb100_sys0crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_sys0crg_clk_data),
+	.ext_clk	= jhb100_sys0_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_sys0_ext_clk),
+	.rst_name	= "jhb100-r-sys0",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_sys0crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-sys0crg",
+		.data = &jhb100_sys0crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_sys0crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-sys0",
+		.of_match_table = jhb100_sys0crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_sys0crg_driver);
-- 
2.25.1

[PATCH v5 07/23] dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator

[Changhuang Liang]

Add bindings for the System-1 clocks and reset generator (SYS1CRG) on
JHB100 SoC.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../clock/starfive,jhb100-sys1crg.yaml        | 71 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 20 ++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 11 +++
 3 files changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
new file mode 100644
index 000000000000..70cbfa38c100
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-sys1crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 System-1 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-sys1crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (25 MHz)
+      - description: PLL0
+      - description: PLL1
+      - description: PLL2
+      - description: PLL4
+      - description: PLL5
+      - description: NPU Non Coherent NOC Initiator
+
+  clock-names:
+    items:
+      - const: osc
+      - const: pll0
+      - const: pll1
+      - const: pll2
+      - const: pll4
+      - const: pll5
+      - const: npu_ncnoc_init
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13004000 {
+      compatible = "starfive,jhb100-sys1crg";
+      reg = <0x13004000 0x4000>;
+      clocks = <&osc>, <&pll0>, <&pll1>,
+               <&syspll 0>, <&syspll 2>,
+               <&syspll 3>, <&sys0crg 61>;
+      clock-names = "osc", "pll0", "pll1", "pll2",
+                    "pll4", "pll5", "npu_ncnoc_init";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index 24ef2663f05a..d7904b32bd51 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -53,4 +53,24 @@
 #define JHB100_SYS0CLK_GPU0_NCNOC_INIT			73
 #define JHB100_SYS0CLK_GPU1_NCNOC_INIT			74
 
+/* SYS1CRG clocks */
+#define JHB100_SYS1CLK_APB_MAIN_SYS1			0
+#define JHB100_SYS1CLK_APB_SENSOR_ICG_BUF		1
+
+#define JHB100_SYS1CLK_GPIO_ESPI1_EXT			5
+
+#define JHB100_SYS1CLK_HOSTSS1_NCNOC_CFG		7
+#define JHB100_SYS1CLK_HOSTSS1_PHY_SCAN_1000_ICG_BUF	8
+#define JHB100_SYS1CLK_NPU_NCNOC_CFG			9
+#define JHB100_SYS1CLK_NPU_CORE_DIV			10
+#define JHB100_SYS1CLK_DOM_NPU_CORE_CLK			11
+#define JHB100_SYS1CLK_DOM_NPU_BUS_CLK			12
+#define JHB100_SYS1CLK_DOM_NPU_INIT_CLK			13
+#define JHB100_SYS1CLK_DOM_NPU_OSC_CLK			14
+#define JHB100_SYS1CLK_VOUT_NCNOC_TARG			15
+#define JHB100_SYS1CLK_VOUT_PIX0			16
+#define JHB100_SYS1CLK_VOUT_PIX1			17
+#define JHB100_SYS1CLK_BMCPER3_NCNOC_TARG		18
+#define JHB100_SYS1CLK_BMCPER3_CFG_125			19
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index 5c7b00afda73..da1b51621172 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -25,4 +25,15 @@
 #define JHB100_SYS0RST_BMCUSB_RSTN_BUS					13
 #define JHB100_SYS0RST_BMCUSB_RSTN_CRG					14
 
+/* SYS1CRG resets */
+#define JHB100_SYS1RST_SYS1_IOMUX_PRESETN				0
+#define JHB100_SYS1RST_MAIN_RSTN_CHIPTOP_SENSOR				1
+#define JHB100_SYS1RST_VOUT_RSTN_HOST0					2
+#define JHB100_SYS1RST_VOUT_RSTN_HOST1					3
+#define JHB100_SYS1RST_HOSTSS1_RSTN_BUS_ESPI				4
+#define JHB100_SYS1RST_HOSTSS1_RSTN_BUS_PCIE				5
+#define JHB100_SYS1RST_HOSTSS1_RSTN_CRG					6
+#define JHB100_SYS1RST_BMCPERIPH3_RSTN_CRG				7
+#define JHB100_SYS1RST_BMCPERIPH3_RSTN_BUS				8
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 08/23] clk: starfive: Add JHB100 System-1 clock generator driver

[Changhuang Liang]

Add support for JHB100 System-1 clock generator (SYS1CRG).

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 ++
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-sys1.c   | 105 ++++++++++++++++++
 3 files changed, 116 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys1.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index cd5b7754403e..11da8bcc4046 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -82,3 +82,13 @@ config CLK_STARFIVE_JHB100_SYS0
 	help
 	  Say yes here to support the system-0 clock controller on the
 	  StarFive JHB100 SoC.
+
+config CLK_STARFIVE_JHB100_SYS1
+	bool "StarFive JHB100 system-1 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the system-1 clock controller on the
+	  StarFive JHB100 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index d2ba83d7d02c..0061550e0f7e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)	+= clk-starfive-jh7110-isp.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
 
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
+obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-sys1.c b/drivers/clk/starfive/clk-starfive-jhb100-sys1.c
new file mode 100644
index 000000000000..92e9c66ca0ff
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-sys1.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 System-1 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_SYS1CLK_NUM_CLKS			(JHB100_SYS1CLK_BMCPER3_CFG_125 + 1)
+
+/* external clocks */
+#define JHB100_SYS1CLK_OSC			(JHB100_SYS1CLK_NUM_CLKS + 0)
+#define JHB100_SYS1CLK_PLL0			(JHB100_SYS1CLK_NUM_CLKS + 1)
+#define JHB100_SYS1CLK_PLL1			(JHB100_SYS1CLK_NUM_CLKS + 2)
+#define JHB100_SYS1CLK_PLL2			(JHB100_SYS1CLK_NUM_CLKS + 3)
+#define JHB100_SYS1CLK_PLL4			(JHB100_SYS1CLK_NUM_CLKS + 4)
+#define JHB100_SYS1CLK_PLL5			(JHB100_SYS1CLK_NUM_CLKS + 5)
+#define JHB100_SYS1CLK_NPU_NCNOC_INIT		(JHB100_SYS1CLK_NUM_CLKS + 6)
+
+static const char * const jhb100_sys1_ext_clk[] = {
+	"osc",
+	"pll0",
+	"pll1",
+	"pll2",
+	"pll4",
+	"pll5",
+	"npu_ncnoc_init",
+};
+
+static const struct jh71x0_clk_data jhb100_sys1crg_clk_data[] = {
+	/* root */
+	JH71X0__DIV(JHB100_SYS1CLK_APB_MAIN_SYS1, "apb_main_sys1", 12,
+		    JHB100_SYS1CLK_PLL1),
+	/* sensor */
+	JH71X0_GATE(JHB100_SYS1CLK_APB_SENSOR_ICG_BUF, "apb_sensor_icg_buf",
+		    CLK_IS_CRITICAL, JHB100_SYS1CLK_APB_MAIN_SYS1),
+	/* hostss1 */
+	JH71X0__DIV(JHB100_SYS1CLK_GPIO_ESPI1_EXT, "gpio_espi1_ext", 14,
+		    JHB100_SYS1CLK_PLL2),
+	JH71X0__DIV(JHB100_SYS1CLK_HOSTSS1_NCNOC_CFG, "hostss1_ncnoc_cfg", 12,
+		    JHB100_SYS1CLK_PLL1),
+	JH71X0_GATE(JHB100_SYS1CLK_HOSTSS1_PHY_SCAN_1000_ICG_BUF,
+		    "hostss1_phy_scan_1000_icg_buf", CLK_IS_CRITICAL,
+		    JHB100_SYS1CLK_PLL1),
+	/* npu */
+	JH71X0__DIV(JHB100_SYS1CLK_NPU_NCNOC_CFG, "npu_ncnoc_cfg", 6,
+		    JHB100_SYS1CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS1CLK_NPU_CORE_DIV, "npu_core_div", 10,
+		    JHB100_SYS1CLK_PLL0),
+	JH71X0_GATE(JHB100_SYS1CLK_DOM_NPU_CORE_CLK, "dom_npu_core_clk",
+		    CLK_IS_CRITICAL, JHB100_SYS1CLK_NPU_CORE_DIV),
+	JH71X0_GATE(JHB100_SYS1CLK_DOM_NPU_BUS_CLK, "dom_npu_bus_clk",
+		    CLK_IS_CRITICAL, JHB100_SYS1CLK_NPU_NCNOC_INIT),
+	JH71X0_GATE(JHB100_SYS1CLK_DOM_NPU_INIT_CLK, "dom_npu_init_clk",
+		    CLK_IS_CRITICAL, JHB100_SYS1CLK_NPU_NCNOC_CFG),
+	JH71X0_GATE(JHB100_SYS1CLK_DOM_NPU_OSC_CLK, "dom_npu_osc_clk",
+		    CLK_IS_CRITICAL, JHB100_SYS1CLK_OSC),
+	/* vout */
+	JH71X0__DIV(JHB100_SYS1CLK_VOUT_NCNOC_TARG, "vout_ncnoc_targ", 12,
+		    JHB100_SYS1CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS1CLK_VOUT_PIX0, "vout_pix0", 4,
+		    JHB100_SYS1CLK_PLL4),
+	JH71X0__DIV(JHB100_SYS1CLK_VOUT_PIX1, "vout_pix1", 4,
+		    JHB100_SYS1CLK_PLL5),
+	/* bmcperiph3 */
+	JH71X0__DIV(JHB100_SYS1CLK_BMCPER3_NCNOC_TARG, "bmcper3_ncnoc_targ", 12,
+		    JHB100_SYS1CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS1CLK_BMCPER3_CFG_125, "bmcper3_cfg_125", 10,
+		    JHB100_SYS1CLK_PLL1),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_sys1crg_info = {
+	.clk_data	= jhb100_sys1crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_sys1crg_clk_data),
+	.ext_clk	= jhb100_sys1_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_sys1_ext_clk),
+	.rst_name	= "jhb100-r-sys1",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_sys1crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-sys1crg",
+		.data = &jhb100_sys1crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_sys1crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-sys1",
+		.of_match_table = jhb100_sys1crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_sys1crg_driver);
-- 
2.25.1

[PATCH v5 09/23] dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator

[Changhuang Liang]

Add bindings for the System-2 clocks and reset generator (SYS2CRG) on
JHB100 SoC.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../clock/starfive,jhb100-sys2crg.yaml        | 64 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 33 ++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 25 ++++++++
 3 files changed, 122 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
new file mode 100644
index 000000000000..a63809c72e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-sys2crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 System-2 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-sys2crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (25 MHz)
+      - description: PLL1
+      - description: GPU0 Non Coherent NOC Initiator
+      - description: GPU1 Non Coherent NOC Initiator
+
+  clock-names:
+    items:
+      - const: osc
+      - const: pll1
+      - const: gpu0_ncnoc_init
+      - const: gpu1_ncnoc_init
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13008000 {
+      compatible = "starfive,jhb100-sys2crg";
+      reg = <0x13008000 0x4000>;
+      clocks = <&osc>, <&pll1>, <&sys0crg 73>,
+               <&sys0crg 74>;
+      clock-names = "osc", "pll1", "gpu0_ncnoc_init",
+                    "gpu1_ncnoc_init";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index d7904b32bd51..d19618e2a846 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -73,4 +73,37 @@
 #define JHB100_SYS1CLK_BMCPER3_NCNOC_TARG		18
 #define JHB100_SYS1CLK_BMCPER3_CFG_125			19
 
+/* SYS2CRG clocks */
+#define JHB100_SYS2CLK_JTAGM0_HCLK			3
+#define JHB100_SYS2CLK_JTAGM1_HCLK			4
+#define JHB100_SYS2CLK_JTAGM0_ATPG			5
+#define JHB100_SYS2CLK_JTAGM1_ATPG			6
+#define JHB100_SYS2CLK_JTAGM0_ATPG_TCLOCK		7
+#define JHB100_SYS2CLK_JTAGM1_ATPG_TCLOCK		8
+#define JHB100_SYS2CLK_JTAG0_MST_WRAP_HCLK		9
+#define JHB100_SYS2CLK_JTAG0_MST_WRAP_CLK_JTAG		10
+#define JHB100_SYS2CLK_JTAG0_MST_WRAP_APB_PCLK		11
+#define JHB100_SYS2CLK_JTAG0_MST_WRAP_ATPG_TCLOCK	12
+#define JHB100_SYS2CLK_JTAG1_MST_WRAP_HCLK		13
+#define JHB100_SYS2CLK_JTAG1_MST_WRAP_CLK_JTAG		14
+#define JHB100_SYS2CLK_JTAG1_MST_WRAP_APB_PCLK		15
+#define JHB100_SYS2CLK_JTAG1_MST_WRAP_ATPG_TCLOCK	16
+#define JHB100_SYS2CLK_HOSTUSB_NCNOC_TARG		17
+#define JHB100_SYS2CLK_HOSTUSBCMN_CFG_500		18
+#define JHB100_SYS2CLK_BMCPER1_NCNOC_TARG		19
+#define JHB100_SYS2CLK_BMCPER1_CFG_250			20
+#define JHB100_SYS2CLK_BMCPER1_CFG_143_DFT		21
+#define JHB100_SYS2CLK_BMCPER1_CFG_143			22
+#define JHB100_SYS2CLK_BMCPER0_NCNOC_TARG		23
+#define JHB100_SYS2CLK_GPU0_NCNOC_TARG			24
+#define JHB100_SYS2CLK_GPU0_BUS_CLK			25
+#define JHB100_SYS2CLK_GPU0_APB_CLK			26
+#define JHB100_SYS2CLK_GPU0_OSC_CLK			27
+#define JHB100_SYS2CLK_GPU1_NCNOC_TARG			28
+#define JHB100_SYS2CLK_GPU1_BUS_CLK			29
+#define JHB100_SYS2CLK_GPU1_APB_CLK			30
+#define JHB100_SYS2CLK_GPU1_OSC_CLK			31
+#define JHB100_SYS2CLK_MAIN_ICG_EN_JTAG0		32
+#define JHB100_SYS2CLK_MAIN_ICG_EN_JTAG1		33
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index da1b51621172..fbc55f95e76c 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -36,4 +36,29 @@
 #define JHB100_SYS1RST_BMCPERIPH3_RSTN_CRG				7
 #define JHB100_SYS1RST_BMCPERIPH3_RSTN_BUS				8
 
+/* SYS2CRG resets */
+#define JHB100_SYS2RST_JTAG0_MST_WRAP_HRESETN				0
+#define JHB100_SYS2RST_JTAG0_MST_WRAP_APB_PRESETN			1
+#define JHB100_SYS2RST_JTAG1_MST_WRAP_HRESETN				2
+#define JHB100_SYS2RST_JTAG1_MST_WRAP_APB_PRESETN			3
+#define JHB100_SYS2RST_HUSBCMN_HOSTCMN_RSTN_BUS_NCNOC_INIT		4
+#define JHB100_SYS2RST_HUSBCMN_RSTN_HOSTCMN_CRG				5
+#define JHB100_SYS2RST_HUSBCMN_HOSTUSB0_RSTN_BUS_NCNOC_BMC_TARG		6
+#define JHB100_SYS2RST_HUSBCMN_HOSTUSB0_RSTN_BUS_NCNOC_HOST_TARG	7
+#define JHB100_SYS2RST_HUSBCMN_RSTN_BMC_CRG				8
+#define JHB100_SYS2RST_HUSBCMN_RSTN_HOSTUSB0_CRG			9
+#define JHB100_SYS2RST_HUSBCMN_HOSTUSB1_RSTN_BUS_NCNOC_BMC_TARG		10
+#define JHB100_SYS2RST_HUSBCMN_HOSTUSB1_RSTN_BUS_NCNOC_HOST_TARG	11
+#define JHB100_SYS2RST_HUSBCMN_RSTN_HOSTUSB1_CRG			12
+#define JHB100_SYS2RST_BMCPERIPH1_RSTN_CRG				13
+#define JHB100_SYS2RST_BMCPERIPH1_RSTN_BUS				14
+#define JHB100_SYS2RST_BMCPERIPH0_RSTN_CRG				15
+#define JHB100_SYS2RST_BMCPERIPH0_RSTN_BUS				16
+#define JHB100_SYS2RST_GPU0_RSTN_CRG					17
+#define JHB100_SYS2RST_GPU0_RSTN_BUS					18
+#define JHB100_SYS2RST_GPU0_HOST_PCIE_RST_N				19
+#define JHB100_SYS2RST_GPU1_RSTN_CRG					20
+#define JHB100_SYS2RST_GPU1_RSTN_BUS					21
+#define JHB100_SYS2RST_GPU1_HOST_PCIE_RST_N				22
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 10/23] clk: starfive: Add JHB100 System-2 clock generator driver

[Changhuang Liang]

Add support for JHB100 System-2 clock generator (SYS2CRG).

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 ++
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-sys2.c   | 129 ++++++++++++++++++
 3 files changed, 140 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys2.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 11da8bcc4046..cfaac934a8e0 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -92,3 +92,13 @@ config CLK_STARFIVE_JHB100_SYS1
 	help
 	  Say yes here to support the system-1 clock controller on the
 	  StarFive JHB100 SoC.
+
+config CLK_STARFIVE_JHB100_SYS2
+	bool "StarFive JHB100 system-2 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the system-2 clock controller on the
+	  StarFive JHB100 SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 0061550e0f7e..29cdef20575e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
 
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
+obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-sys2.c b/drivers/clk/starfive/clk-starfive-jhb100-sys2.c
new file mode 100644
index 000000000000..a2c7e8eba9b6
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-sys2.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 System-2 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_SYS2CLK_NUM_CLKS			(JHB100_SYS2CLK_MAIN_ICG_EN_JTAG1 + 1)
+
+/* external clocks */
+#define JHB100_SYS2CLK_OSC			(JHB100_SYS2CLK_NUM_CLKS + 0)
+#define JHB100_SYS2CLK_PLL1			(JHB100_SYS2CLK_NUM_CLKS + 1)
+#define JHB100_SYS2CLK_GPU0_NCNOC_INIT		(JHB100_SYS2CLK_NUM_CLKS + 2)
+#define JHB100_SYS2CLK_GPU1_NCNOC_INIT		(JHB100_SYS2CLK_NUM_CLKS + 3)
+
+static const char * const jhb100_sys2_ext_clk[] = {
+	"osc",
+	"pll1",
+	"gpu0_ncnoc_init",
+	"gpu1_ncnoc_init",
+};
+
+static const struct jh71x0_clk_data jhb100_sys2crg_clk_data[] = {
+	/* jtag mst*/
+	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_HCLK, "jtagm0_hclk", 6,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_HCLK, "jtagm1_hclk", 6,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_ATPG, "jtagm0_ATPG", 12,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_ATPG, "jtagm1_ATPG", 12,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_ATPG_TCLOCK, "jtagm0_atpg_tclock", 2,
+		    JHB100_SYS2CLK_JTAGM0_ATPG),
+	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_ATPG_TCLOCK, "jtagm1_atpg_tclock", 2,
+		    JHB100_SYS2CLK_JTAGM1_ATPG),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_HCLK, "jtag0_mst_wrap_hclk",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_HCLK),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_CLK_JTAG, "jtag0_mst_wrap_clk_jtag",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_HCLK),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_APB_PCLK, "jtag0_mst_wrap_apb_pclk",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_ATPG),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_ATPG_TCLOCK, "jtag0_mst_wrap_atpg_tclock",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_ATPG),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_HCLK, "jtag1_mst_wrap_hclk",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_HCLK),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_CLK_JTAG, "jtag1_mst_wrap_clk_jtag",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_HCLK),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_APB_PCLK, "jtag1_mst_wrap_apb_pclk",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_ATPG),
+	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_ATPG_TCLOCK, "jtag1_mst_wrap_atpg_tclock",
+		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_ATPG),
+	/* hostusbcmn */
+	JH71X0__DIV(JHB100_SYS2CLK_HOSTUSB_NCNOC_TARG, "hostusb_ncnoc_targ", 12,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_HOSTUSBCMN_CFG_500, "hostusbcmn_cfg_500", 4,
+		    JHB100_SYS2CLK_PLL1),
+	/* bmcperiph1 */
+	JH71X0__DIV(JHB100_SYS2CLK_BMCPER1_NCNOC_TARG, "bmcper1_ncnoc_targ", 6,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_BMCPER1_CFG_250, "bmcper1_cfg_250", 5,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0__DIV(JHB100_SYS2CLK_BMCPER1_CFG_143_DFT, "bmcper1_cfg_143_dft", 8,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0_GATE(JHB100_SYS2CLK_BMCPER1_CFG_143, "bmcper1_cfg_143", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_BMCPER1_CFG_143_DFT),
+	/* bmcperiph0 */
+	JH71X0__DIV(JHB100_SYS2CLK_BMCPER0_NCNOC_TARG, "bmcper0_ncnoc_targ", 6,
+		    JHB100_SYS2CLK_PLL1),
+	/* gpu0 */
+	JH71X0__DIV(JHB100_SYS2CLK_GPU0_NCNOC_TARG, "gpu0_ncnoc_targ", 12,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0_GATE(JHB100_SYS2CLK_GPU0_BUS_CLK, "gpu0_bus_clk", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_GPU0_NCNOC_INIT),
+	JH71X0_GATE(JHB100_SYS2CLK_GPU0_APB_CLK, "gpu0_apb_clk", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_GPU0_NCNOC_TARG),
+	JH71X0_GATE(JHB100_SYS2CLK_GPU0_OSC_CLK, "gpu0_osc_clk", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_OSC),
+	/* gpu1 */
+	JH71X0__DIV(JHB100_SYS2CLK_GPU1_NCNOC_TARG, "gpu1_ncnoc_targ", 12,
+		    JHB100_SYS2CLK_PLL1),
+	JH71X0_GATE(JHB100_SYS2CLK_GPU1_BUS_CLK, "gpu1_bus_clk", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_GPU1_NCNOC_INIT),
+	JH71X0_GATE(JHB100_SYS2CLK_GPU1_APB_CLK, "gpu1_apb_clk", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_GPU1_NCNOC_TARG),
+	JH71X0_GATE(JHB100_SYS2CLK_GPU1_OSC_CLK, "gpu1_osc_clk", CLK_IS_CRITICAL,
+		    JHB100_SYS2CLK_OSC),
+	/* main icg */
+	JH71X0_GATE(JHB100_SYS2CLK_MAIN_ICG_EN_JTAG0, "main_icg_en_jtag0", 0,
+		    JHB100_SYS2CLK_JTAGM0_HCLK),
+	JH71X0_GATE(JHB100_SYS2CLK_MAIN_ICG_EN_JTAG1, "main_icg_en_jtag1", 0,
+		    JHB100_SYS2CLK_JTAGM1_HCLK),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_sys2crg_info = {
+	.clk_data	= jhb100_sys2crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_sys2crg_clk_data),
+	.ext_clk	= jhb100_sys2_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_sys2_ext_clk),
+	.rst_name	= "jhb100-r-sys2",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_sys2crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-sys2crg",
+		.data = &jhb100_sys2crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_sys2crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-sys2",
+		.of_match_table = jhb100_sys2crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_sys2crg_driver);
-- 
2.25.1

[PATCH v5 11/23] dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator

[Changhuang Liang]

Add bindings for the Peripheral-0 clock and reset generator (PER0CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../clock/starfive,jhb100-per0crg.yaml        |  70 +++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 281 ++++++++++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   |  77 +++++
 3 files changed, 428 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
new file mode 100644
index 000000000000..db43e03fd60c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-per0crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 Peripheral-0 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-per0crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (25 MHz)
+      - description: PLL6
+      - description: Configure 400MHz
+      - description: Configure 800MHZ
+      - description: Non Coherent NOC Initiator
+      - description: Non Coherent NOC Target
+
+  clock-names:
+    items:
+      - const: osc
+      - const: pll6
+      - const: cfg_400
+      - const: cfg_800
+      - const: ncnoc_init
+      - const: ncnoc_targ
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11a08000 {
+      compatible = "starfive,jhb100-per0crg";
+      reg = <0x11a08000 0x1000>;
+      clocks = <&osc>, <&pll6>, <&sys0crg 71>,
+               <&sys0crg 72>, <&sys0crg 70>,
+               <&sys2crg 23>;
+      clock-names = "osc", "pll6", "cfg_400",
+                    "cfg_800", "ncnoc_init",
+                    "ncnoc_targ";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index d19618e2a846..add2cd093dbd 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -106,4 +106,285 @@
 #define JHB100_SYS2CLK_MAIN_ICG_EN_JTAG0		32
 #define JHB100_SYS2CLK_MAIN_ICG_EN_JTAG1		33
 
+/* PER0CRG clocks */
+#define JHB100_PER0CLK_CDR_I3C0				0
+#define JHB100_PER0CLK_CDR_I3C1				1
+#define JHB100_PER0CLK_CDR_I3C2				2
+#define JHB100_PER0CLK_CDR_I3C3				3
+#define JHB100_PER0CLK_CDR_I3C4				4
+#define JHB100_PER0CLK_CDR_I3C5				5
+#define JHB100_PER0CLK_CDR_I3C6				6
+#define JHB100_PER0CLK_CDR_I3C7				7
+#define JHB100_PER0CLK_CDR_I3C8				8
+#define JHB100_PER0CLK_CDR_I3C9				9
+#define JHB100_PER0CLK_CDR_I3C10			10
+#define JHB100_PER0CLK_CDR_I3C11			11
+#define JHB100_PER0CLK_CDR_I3C12			12
+#define JHB100_PER0CLK_CDR_I3C13			13
+#define JHB100_PER0CLK_CDR_I3C14			14
+#define JHB100_PER0CLK_CDR_I3C15			15
+#define JHB100_PER0CLK_200				16
+#define JHB100_PER0CLK_600_DIV6				17
+#define JHB100_PER0CLK_600_DIV6_DIV5			18
+#define JHB100_PER0CLK_TIMER0_DUALTIMER0		19
+#define JHB100_PER0CLK_TIMER1_DUALTIMER0		20
+#define JHB100_PER0CLK_TIMER0_DUALTIMER1		21
+#define JHB100_PER0CLK_TIMER1_DUALTIMER1		22
+#define JHB100_PER0CLK_TIMER0_DUALTIMER2		23
+#define JHB100_PER0CLK_TIMER1_DUALTIMER2		24
+#define JHB100_PER0CLK_1200_PH0_LVDS0			25
+#define JHB100_PER0CLK_1200_PH0_LVDS1			26
+#define JHB100_PER0CLK_1200_CORE0			27
+#define JHB100_PER0CLK_1200_CORE1			28
+#define JHB100_PER0CLK_1200_SHIFT90_LVDS0		29
+#define JHB100_PER0CLK_1200_SHIFT90_LVDS1		30
+#define JHB100_PER0CLK_1200_DIV5_CORE0			31
+#define JHB100_PER0CLK_1200_DIV5_CORE1			32
+#define JHB100_PER0CLK_PH0_LTPI0			33
+
+#define JHB100_PER0CLK_PH0_LTPI1			35
+
+#define JHB100_PER0CLK_PH90_LTPI0			37
+
+#define JHB100_PER0CLK_PH90_LTPI1			39
+
+#define JHB100_PER0CLK_240_CORE_LTPI0			41
+
+#define JHB100_PER0CLK_240_CORE_LTPI1			43
+
+#define JHB100_PER0CLK_AXI_DMA_I2C_INIT			45
+#define JHB100_PER0CLK_AXI_DMA_I3C_INIT			46
+#define JHB100_PER0CLK_AXI_DMA_UART_INIT		47
+#define JHB100_PER0CLK_CORE_DMAC0			48
+#define JHB100_PER0CLK_CORE_DMAC1			49
+#define JHB100_PER0CLK_CORE_DMAC2			50
+
+#define JHB100_PER0CLK_HDR_TX_I3C0			78
+#define JHB100_PER0CLK_HDR_TX_I3C1			79
+#define JHB100_PER0CLK_HDR_TX_I3C2			80
+#define JHB100_PER0CLK_HDR_TX_I3C3			81
+#define JHB100_PER0CLK_HDR_TX_I3C4			82
+#define JHB100_PER0CLK_HDR_TX_I3C5			83
+#define JHB100_PER0CLK_HDR_TX_I3C6			84
+#define JHB100_PER0CLK_HDR_TX_I3C7			85
+#define JHB100_PER0CLK_HDR_TX_I3C8			86
+#define JHB100_PER0CLK_HDR_TX_I3C9			87
+#define JHB100_PER0CLK_HDR_TX_I3C10			88
+#define JHB100_PER0CLK_HDR_TX_I3C11			89
+#define JHB100_PER0CLK_HDR_TX_I3C12			90
+#define JHB100_PER0CLK_HDR_TX_I3C13			91
+#define JHB100_PER0CLK_HDR_TX_I3C14			92
+#define JHB100_PER0CLK_HDR_TX_I3C15			93
+#define JHB100_PER0CLK_CORE_I2C0			94
+#define JHB100_PER0CLK_CORE_I2C1			95
+#define JHB100_PER0CLK_CORE_I2C2			96
+#define JHB100_PER0CLK_CORE_I2C3			97
+#define JHB100_PER0CLK_CORE_I2C4			98
+#define JHB100_PER0CLK_CORE_I2C5			99
+#define JHB100_PER0CLK_CORE_I2C6			100
+#define JHB100_PER0CLK_CORE_I2C7			101
+#define JHB100_PER0CLK_CORE_I2C8			102
+#define JHB100_PER0CLK_CORE_I2C9			103
+#define JHB100_PER0CLK_CORE_I2C10			104
+#define JHB100_PER0CLK_CORE_I2C11			105
+#define JHB100_PER0CLK_CORE_I2C12			106
+#define JHB100_PER0CLK_CORE_I2C13			107
+#define JHB100_PER0CLK_CORE_I2C14			108
+#define JHB100_PER0CLK_CORE_I2C15			109
+
+#define JHB100_PER0CLK_WDOGCLK_WDT0			126
+#define JHB100_PER0CLK_WDOGCLK_WDT1			127
+#define JHB100_PER0CLK_WDOGCLK_WDT2			128
+#define JHB100_PER0CLK_WDOGCLK_WDT3			129
+#define JHB100_PER0CLK_WDOGCLK_WDT_EXTERNAL		130
+#define JHB100_PER0CLK_SCLK_UART4			131
+#define JHB100_PER0CLK_SCLK_UART5			132
+#define JHB100_PER0CLK_SCLK_UART6			133
+#define JHB100_PER0CLK_SCLK_UART7			134
+#define JHB100_PER0CLK_SCLK_UART8			135
+#define JHB100_PER0CLK_SCLK_UART9			136
+#define JHB100_PER0CLK_SCLK_UART10			137
+#define JHB100_PER0CLK_SCLK_UART11			138
+#define JHB100_PER0CLK_SCLK_UART12			139
+#define JHB100_PER0CLK_SCLK_UART13			140
+#define JHB100_PER0CLK_SCLK_UART14			141
+
+#define JHB100_PER0CLK_PCLK_DMA_UART_CFG		148
+#define JHB100_PER0CLK_PCLK_DMA_I2C_CFG			149
+#define JHB100_PER0CLK_PCLK_DMA_I3C_CFG			150
+#define JHB100_PER0CLK_PCLK_DUALTIMER0			151
+#define JHB100_PER0CLK_PCLK_DUALTIMER1			152
+#define JHB100_PER0CLK_PCLK_DUALTIMER2			153
+
+#define JHB100_PER0CLK_HCLK_TRNG			156
+#define JHB100_PER0CLK_APB_I2C0				157
+#define JHB100_PER0CLK_APB_I2C1				158
+#define JHB100_PER0CLK_APB_I2C2				159
+#define JHB100_PER0CLK_APB_I2C3				160
+#define JHB100_PER0CLK_APB_I2C4				161
+#define JHB100_PER0CLK_APB_I2C5				162
+#define JHB100_PER0CLK_APB_I2C6				163
+#define JHB100_PER0CLK_APB_I2C7				164
+#define JHB100_PER0CLK_APB_I2C8				165
+#define JHB100_PER0CLK_APB_I2C9				166
+#define JHB100_PER0CLK_APB_I2C10			167
+#define JHB100_PER0CLK_APB_I2C11			168
+#define JHB100_PER0CLK_APB_I2C12			169
+#define JHB100_PER0CLK_APB_I2C13			170
+#define JHB100_PER0CLK_APB_I2C14			171
+#define JHB100_PER0CLK_APB_I2C15			172
+#define JHB100_PER0CLK_APB_I2CF0			173
+#define JHB100_PER0CLK_APB_I2CF1			174
+#define JHB100_PER0CLK_APB_I2CF2			175
+#define JHB100_PER0CLK_APB_I2CF3			176
+#define JHB100_PER0CLK_APB_I2CF4			177
+#define JHB100_PER0CLK_APB_I2CF5			178
+#define JHB100_PER0CLK_APB_I2CF6			179
+#define JHB100_PER0CLK_APB_I2CF7			180
+#define JHB100_PER0CLK_APB_I2CF8			181
+#define JHB100_PER0CLK_APB_I2CF9			182
+#define JHB100_PER0CLK_APB_I2CF10			183
+#define JHB100_PER0CLK_APB_I2CF11			184
+#define JHB100_PER0CLK_APB_I2CF12			185
+#define JHB100_PER0CLK_APB_I2CF13			186
+#define JHB100_PER0CLK_APB_I2CF14			187
+#define JHB100_PER0CLK_APB_I2CF15			188
+#define JHB100_PER0CLK_APB_I3C0				189
+#define JHB100_PER0CLK_APB_I3C1				190
+#define JHB100_PER0CLK_APB_I3C2				191
+#define JHB100_PER0CLK_APB_I3C3				192
+#define JHB100_PER0CLK_APB_I3C4				193
+#define JHB100_PER0CLK_APB_I3C5				194
+#define JHB100_PER0CLK_APB_I3C6				195
+#define JHB100_PER0CLK_APB_I3C7				196
+#define JHB100_PER0CLK_APB_I3C8				197
+#define JHB100_PER0CLK_APB_I3C9				198
+#define JHB100_PER0CLK_APB_I3C10			199
+#define JHB100_PER0CLK_APB_I3C11			200
+#define JHB100_PER0CLK_APB_I3C12			201
+#define JHB100_PER0CLK_APB_I3C13			202
+#define JHB100_PER0CLK_APB_I3C14			203
+#define JHB100_PER0CLK_APB_I3C15			204
+#define JHB100_PER0CLK_APB_UART0			205
+#define JHB100_PER0CLK_APB_UART1			206
+#define JHB100_PER0CLK_APB_UART2			207
+#define JHB100_PER0CLK_APB_UART3			208
+#define JHB100_PER0CLK_APB_UART4			209
+#define JHB100_PER0CLK_APB_UART5			210
+#define JHB100_PER0CLK_APB_UART6			211
+#define JHB100_PER0CLK_APB_UART7			212
+#define JHB100_PER0CLK_APB_UART8			213
+#define JHB100_PER0CLK_APB_UART9			214
+#define JHB100_PER0CLK_APB_UART10			215
+#define JHB100_PER0CLK_APB_UART11			216
+#define JHB100_PER0CLK_APB_UART12			217
+#define JHB100_PER0CLK_APB_UART13			218
+#define JHB100_PER0CLK_APB_UART14			219
+#define JHB100_PER0CLK_DMA_I3C0				220
+#define JHB100_PER0CLK_DMA_I3C1				221
+#define JHB100_PER0CLK_DMA_I3C2				222
+#define JHB100_PER0CLK_DMA_I3C3				223
+#define JHB100_PER0CLK_DMA_I3C4				224
+#define JHB100_PER0CLK_DMA_I3C5				225
+#define JHB100_PER0CLK_DMA_I3C6				226
+#define JHB100_PER0CLK_DMA_I3C7				227
+#define JHB100_PER0CLK_DMA_I3C8				228
+#define JHB100_PER0CLK_DMA_I3C9				229
+#define JHB100_PER0CLK_DMA_I3C10			230
+#define JHB100_PER0CLK_DMA_I3C11			231
+#define JHB100_PER0CLK_DMA_I3C12			232
+#define JHB100_PER0CLK_DMA_I3C13			233
+#define JHB100_PER0CLK_DMA_I3C14			234
+#define JHB100_PER0CLK_DMA_I3C15			235
+#define JHB100_PER0CLK_CORE_I3C0			236
+#define JHB100_PER0CLK_CORE_I3C1			237
+#define JHB100_PER0CLK_CORE_I3C2			238
+#define JHB100_PER0CLK_CORE_I3C3			239
+#define JHB100_PER0CLK_CORE_I3C4			240
+#define JHB100_PER0CLK_CORE_I3C5			241
+#define JHB100_PER0CLK_CORE_I3C6			242
+#define JHB100_PER0CLK_CORE_I3C7			243
+#define JHB100_PER0CLK_CORE_I3C8			244
+#define JHB100_PER0CLK_CORE_I3C9			245
+#define JHB100_PER0CLK_CORE_I3C10			246
+#define JHB100_PER0CLK_CORE_I3C11			247
+#define JHB100_PER0CLK_CORE_I3C12			248
+#define JHB100_PER0CLK_CORE_I3C13			249
+#define JHB100_PER0CLK_CORE_I3C14			250
+#define JHB100_PER0CLK_CORE_I3C15			251
+#define JHB100_PER0CLK_DMAC_AXI_PERIPH0_HS_CLK_I2C	252
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C0			253
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C1			254
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C2			255
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C3			256
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C4			257
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C5			258
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C6			259
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C7			260
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C8			261
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C9			262
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C10		263
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C11		264
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C12		265
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C13		266
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C14		267
+#define JHB100_PER0CLK_MAIN_ICG_EN_I3C15		268
+#define JHB100_PER0CLK_MAIN_ICG_EN_DUALTIMER0		269
+#define JHB100_PER0CLK_MAIN_ICG_EN_DUALTIMER1		270
+#define JHB100_PER0CLK_MAIN_ICG_EN_DUALTIMER2		271
+#define JHB100_PER0CLK_MAIN_ICG_EN_LTPI0		272
+#define JHB100_PER0CLK_MAIN_ICG_EN_LTPI1		273
+#define JHB100_PER0CLK_MAIN_ICG_EN_DMAC_I2C		274
+#define JHB100_PER0CLK_MAIN_ICG_EN_DMAC_I3C		275
+#define JHB100_PER0CLK_MAIN_ICG_EN_DMAC_UART		276
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL4			277
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL5			278
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL6			279
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL7			280
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL8			281
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL9			282
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL10		283
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL11		284
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL12		285
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL13		286
+#define JHB100_PER0CLK_MAIN_ICG_EN_SOL14		287
+
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C0			304
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C1			305
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C2			306
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C3			307
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C4			308
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C5			309
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C6			310
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C7			311
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C8			312
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C9			313
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C10		314
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C11		315
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C12		316
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C13		317
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C14		318
+#define JHB100_PER0CLK_MAIN_ICG_EN_I2C15		319
+#define JHB100_PER0CLK_MAIN_ICG_EN_WDT0			320
+#define JHB100_PER0CLK_MAIN_ICG_EN_WDT1			321
+#define JHB100_PER0CLK_MAIN_ICG_EN_WDT2			322
+#define JHB100_PER0CLK_MAIN_ICG_EN_WDT3			323
+#define JHB100_PER0CLK_MAIN_ICG_EN_WDT_EXTERNAL		324
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART4		325
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART5		326
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART6		327
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART7		328
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART8		329
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART9		330
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART10		331
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART11		332
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART12		333
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART13		334
+#define JHB100_PER0CLK_MAIN_ICG_EN_UART14		335
+#define JHB100_PER0CLK_MAIN_ICG_EN_LDO0			336
+#define JHB100_PER0CLK_MAIN_ICG_EN_LDO1			337
+#define JHB100_PER0CLK_MAIN_ICG_EN_SENSORS_PERIPH0	338
+#define JHB100_PER0CLK_MAIN_ICG_EN_SENSORS_DMAC		339
+#define JHB100_PER0CLK_MAIN_ICG_EN_TRNG			340
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index fbc55f95e76c..ccfb7616e1a7 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -61,4 +61,81 @@
 #define JHB100_SYS2RST_GPU1_RSTN_BUS					21
 #define JHB100_SYS2RST_GPU1_HOST_PCIE_RST_N				22
 
+/* PER0CRG resets */
+#define JHB100_PER0RST_MAIN_RSTN_UART4					0
+#define JHB100_PER0RST_MAIN_RSTN_UART5					1
+#define JHB100_PER0RST_MAIN_RSTN_UART6					2
+#define JHB100_PER0RST_MAIN_RSTN_UART7					3
+#define JHB100_PER0RST_MAIN_RSTN_UART8					4
+#define JHB100_PER0RST_MAIN_RSTN_UART9					5
+#define JHB100_PER0RST_MAIN_RSTN_UART10					6
+#define JHB100_PER0RST_MAIN_RSTN_UART11					7
+#define JHB100_PER0RST_MAIN_RSTN_UART12					8
+#define JHB100_PER0RST_MAIN_RSTN_UART13					9
+#define JHB100_PER0RST_MAIN_RSTN_UART14					10
+#define JHB100_PER0RST_MAIN_RSTN_I2C0					11
+#define JHB100_PER0RST_MAIN_RSTN_I2C1					12
+#define JHB100_PER0RST_MAIN_RSTN_I2C2					13
+#define JHB100_PER0RST_MAIN_RSTN_I2C3					14
+#define JHB100_PER0RST_MAIN_RSTN_I2C4					15
+#define JHB100_PER0RST_MAIN_RSTN_I2C5					16
+#define JHB100_PER0RST_MAIN_RSTN_I2C6					17
+#define JHB100_PER0RST_MAIN_RSTN_I2C7					18
+#define JHB100_PER0RST_MAIN_RSTN_I2C8					19
+#define JHB100_PER0RST_MAIN_RSTN_I2C9					20
+#define JHB100_PER0RST_MAIN_RSTN_I2C10					21
+#define JHB100_PER0RST_MAIN_RSTN_I2C11					22
+#define JHB100_PER0RST_MAIN_RSTN_I2C12					23
+#define JHB100_PER0RST_MAIN_RSTN_I2C13					24
+#define JHB100_PER0RST_MAIN_RSTN_I2C14					25
+#define JHB100_PER0RST_MAIN_RSTN_I2C15					26
+#define JHB100_PER0RST_MAIN_RSTN_I3C0					27
+#define JHB100_PER0RST_MAIN_RSTN_I3C1					28
+#define JHB100_PER0RST_MAIN_RSTN_I3C2					29
+#define JHB100_PER0RST_MAIN_RSTN_I3C3					30
+#define JHB100_PER0RST_MAIN_RSTN_I3C4					31
+#define JHB100_PER0RST_MAIN_RSTN_I3C5					32
+#define JHB100_PER0RST_MAIN_RSTN_I3C6					33
+#define JHB100_PER0RST_MAIN_RSTN_I3C7					34
+#define JHB100_PER0RST_MAIN_RSTN_I3C8					35
+#define JHB100_PER0RST_MAIN_RSTN_I3C9					36
+#define JHB100_PER0RST_MAIN_RSTN_I3C10					37
+#define JHB100_PER0RST_MAIN_RSTN_I3C11					38
+#define JHB100_PER0RST_MAIN_RSTN_I3C12					39
+#define JHB100_PER0RST_MAIN_RSTN_I3C13					40
+#define JHB100_PER0RST_MAIN_RSTN_I3C14					41
+#define JHB100_PER0RST_MAIN_RSTN_I3C15					42
+#define JHB100_PER0RST_MAIN_RSTN_WDT0					43
+#define JHB100_PER0RST_MAIN_RSTN_WDT1					44
+#define JHB100_PER0RST_MAIN_RSTN_WDT2					45
+#define JHB100_PER0RST_MAIN_RSTN_WDT3					46
+#define JHB100_PER0RST_MAIN_RSTN_WDT4					47
+#define JHB100_PER0RST_MAIN_RSTN_DUALTIMER0				48
+#define JHB100_PER0RST_MAIN_RSTN_DUALTIMER1				49
+#define JHB100_PER0RST_MAIN_RSTN_DUALTIMER2				50
+#define JHB100_PER0RST_MAIN_RSTN_TRNG					51
+#define JHB100_PER0RST_MAIN_RSTN_DMAC0					52
+#define JHB100_PER0RST_MAIN_RSTN_DMAC1					53
+#define JHB100_PER0RST_MAIN_RSTN_DMAC2					54
+#define JHB100_PER0RST_MAIN_RSTN_LTPI0					55
+#define JHB100_PER0RST_MAIN_RSTN_LTPI1					56
+#define JHB100_PER0RST_MAIN_RSTN_SOL4					57
+#define JHB100_PER0RST_MAIN_RSTN_SOL5					58
+#define JHB100_PER0RST_MAIN_RSTN_SOL6					59
+#define JHB100_PER0RST_MAIN_RSTN_SOL7					60
+#define JHB100_PER0RST_MAIN_RSTN_SOL8					61
+#define JHB100_PER0RST_MAIN_RSTN_SOL9					62
+#define JHB100_PER0RST_MAIN_RSTN_SOL10					63
+#define JHB100_PER0RST_MAIN_RSTN_SOL11					64
+#define JHB100_PER0RST_MAIN_RSTN_SOL12					65
+#define JHB100_PER0RST_MAIN_RSTN_SOL13					66
+#define JHB100_PER0RST_MAIN_RSTN_SOL14					67
+#define JHB100_PER0RST_MAIN_RSTN_LDO0					68
+#define JHB100_PER0RST_MAIN_RSTN_LDO1					69
+#define JHB100_PER0RST_MAIN_RSTN_PERIPH0_SENSORS			70
+#define JHB100_PER0RST_MAIN_RSTN_DMAC0_SENSORS				71
+#define JHB100_PER0RST_SYSCON_PRESETN					72
+#define JHB100_PER0RST_GPIO_IOMUX_PRESETN				73
+#define JHB100_PER0RST_UART_MUX_REG_WRAP				74
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 12/23] clk: starfive: Introduce idiv ops for inverted divider clocks

[Changhuang Liang]

Some StarFive clocks only advertise the divider and invert capabilities
(via JH71X0_CLK_INVERT, without ENABLE). Add the JH71X0_IDIV() macro
to declare such clocks, and jh71x0_clk_idiv_ops, which combines the
divider rate operations with get_phase/set_phase.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/clk-starfive-jh71x0.c | 12 ++++++++++++
 drivers/clk/starfive/clk-starfive-jh71x0.h |  8 ++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index bb7706ede1a6..1f98f1f8f0a5 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -302,6 +302,15 @@ static const struct clk_ops jh71x0_clk_inv_ops = {
 	.debug_init = jh71x0_clk_debug_init,
 };
 
+static const struct clk_ops jh71x0_clk_idiv_ops = {
+	.get_phase = jh71x0_clk_get_phase,
+	.set_phase = jh71x0_clk_set_phase,
+	.recalc_rate = jh71x0_clk_recalc_rate,
+	.determine_rate = jh71x0_clk_determine_rate,
+	.set_rate = jh71x0_clk_set_rate,
+	.debug_init = jh71x0_clk_debug_init,
+};
+
 const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
 {
 	if (max & JH71X0_CLK_DIV_MASK) {
@@ -312,6 +321,9 @@ const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
 		}
 		if (max & JH71X0_CLK_ENABLE)
 			return &jh71x0_clk_gdiv_ops;
+		else if (max & JH71X0_CLK_INVERT)
+			return &jh71x0_clk_idiv_ops;
+
 		if (max == JH71X0_CLK_FRAC_MAX)
 			return &jh71x0_clk_fdiv_ops;
 		return &jh71x0_clk_div_ops;
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
index 2a1f0fb4cbb1..4cb3c2ef9525 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.h
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
@@ -104,6 +104,14 @@ struct jh71x0_clk_data {
 	.parents = { [0] = _parent },						\
 }
 
+#define JH71X0_IDIV(_idx, _name, _flags, _max, _parent)			\
+[_idx] = {									\
+	.name = _name,								\
+	.flags = _flags,							\
+	.max = JH71X0_CLK_INVERT | (_max),					\
+	.parents = { [0] = _parent },						\
+}
+
 struct jh71x0_clk {
 	struct clk_hw hw;
 	unsigned int idx;
-- 
2.25.1

[PATCH v5 13/23] clk: starfive: Expand the storage of clock parent index

[Changhuang Liang]

Expand the storage of clock parent index for per0 domain, which parent
index over 255. So change u8 to u16.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
 drivers/clk/starfive/clk-starfive-jh71x0.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
index 4cb3c2ef9525..198f6d005415 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.h
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
@@ -27,7 +27,7 @@ struct jh71x0_clk_data {
 	const char *name;
 	unsigned long flags;
 	u32 max;
-	u8 parents[4];
+	u16 parents[4];
 };
 
 #define JH71X0_GATE(_idx, _name, _flags, _parent)				\
-- 
2.25.1

[PATCH v5 14/23] clk: starfive: Add StarFive JHB100 Peripheral-0 clock driver

[Changhuang Liang]

Add driver for the StarFive JHB100 Peripheral-0 clock controller.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 +
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-per0.c   | 599 ++++++++++++++++++
 3 files changed, 610 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per0.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index cfaac934a8e0..b2a05bbb450f 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -73,6 +73,16 @@ config CLK_STARFIVE_JH7110_VOUT
 	  Say yes here to support the Video-Output clock controller
 	  on the StarFive JH7110 SoC.
 
+config CLK_STARFIVE_JHB100_PER0
+	bool "StarFive JHB100 peripheral-0 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the peripheral-0 clock controller
+	  on the StarFive JHB100 SoC.
+
 config CLK_STARFIVE_JHB100_SYS0
 	bool "StarFive JHB100 system-0 clock support"
 	depends on ARCH_STARFIVE || COMPILE_TEST
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 29cdef20575e..352717886295 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_STG)	+= clk-starfive-jh7110-stg.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)	+= clk-starfive-jh7110-isp.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
 
+obj-$(CONFIG_CLK_STARFIVE_JHB100_PER0)		+= clk-starfive-jhb100-per0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-per0.c b/drivers/clk/starfive/clk-starfive-jhb100-per0.c
new file mode 100644
index 000000000000..801501046669
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-per0.c
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 Peripheral-0 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_PER0CLK_NUM_CLKS			(JHB100_PER0CLK_MAIN_ICG_EN_TRNG + 1)
+
+/* external clocks */
+#define JHB100_PER0CLK_OSC			(JHB100_PER0CLK_NUM_CLKS + 0)
+#define JHB100_PER0CLK_PLL6			(JHB100_PER0CLK_NUM_CLKS + 1)
+#define JHB100_PER0CLK_CFG_400			(JHB100_PER0CLK_NUM_CLKS + 2)
+#define JHB100_PER0CLK_CFG_800			(JHB100_PER0CLK_NUM_CLKS + 3)
+#define JHB100_PER0CLK_NCNOC_INIT		(JHB100_PER0CLK_NUM_CLKS + 4)
+#define JHB100_PER0CLK_NCNOC_TARG		(JHB100_PER0CLK_NUM_CLKS + 5)
+
+static const char * const jhb100_per0_ext_clk[] = {
+	"osc",
+	"pll6",
+	"cfg_400",
+	"cfg_800",
+	"ncnoc_init",
+	"ncnoc_targ",
+};
+
+static const struct jh71x0_clk_data jhb100_per0crg_clk_data[] = {
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C0, "cdr_i3c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C1, "cdr_i3c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C2, "cdr_i3c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C3, "cdr_i3c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C4, "cdr_i3c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C5, "cdr_i3c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C6, "cdr_i3c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C7, "cdr_i3c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C8, "cdr_i3c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C9, "cdr_i3c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C10, "cdr_i3c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C11, "cdr_i3c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C12, "cdr_i3c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C13, "cdr_i3c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C14, "cdr_i3c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0_GATE(JHB100_PER0CLK_CDR_I3C15, "cdr_i3c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_800),
+	JH71X0__DIV(JHB100_PER0CLK_200, "per0_200", 3,
+		    JHB100_PER0CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER0CLK_600_DIV6, "per0_600_div6", 6,
+		    JHB100_PER0CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER0CLK_600_DIV6_DIV5, "per0_600_div6_div5", 5,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_TIMER0_DUALTIMER0, "timer0_dualtimer0", 0,
+		    JHB100_PER0CLK_600_DIV6_DIV5),
+	JH71X0_GATE(JHB100_PER0CLK_TIMER1_DUALTIMER0, "timer1_dualtimer0", 0,
+		    JHB100_PER0CLK_600_DIV6_DIV5),
+	JH71X0_GATE(JHB100_PER0CLK_TIMER0_DUALTIMER1, "timer0_dualtimer1", 0,
+		    JHB100_PER0CLK_600_DIV6_DIV5),
+	JH71X0_GATE(JHB100_PER0CLK_TIMER1_DUALTIMER1, "timer1_dualtimer1", 0,
+		    JHB100_PER0CLK_600_DIV6_DIV5),
+	JH71X0_GATE(JHB100_PER0CLK_TIMER0_DUALTIMER2, "timer0_dualtimer2", 0,
+		    JHB100_PER0CLK_600_DIV6_DIV5),
+	JH71X0_GATE(JHB100_PER0CLK_TIMER1_DUALTIMER2, "timer1_dualtimer2", 0,
+		    JHB100_PER0CLK_600_DIV6_DIV5),
+	JH71X0__DIV(JHB100_PER0CLK_1200_PH0_LVDS0, "1200_ph0_lvds0", 2,
+		    JHB100_PER0CLK_PH0_LTPI0),
+	JH71X0__DIV(JHB100_PER0CLK_1200_PH0_LVDS1, "1200_ph0_lvds1", 2,
+		    JHB100_PER0CLK_PH0_LTPI1),
+	JH71X0__DIV(JHB100_PER0CLK_1200_CORE0, "1200_core0", 2,
+		    JHB100_PER0CLK_PLL6),
+	JH71X0__DIV(JHB100_PER0CLK_1200_CORE1, "1200_core1", 2,
+		    JHB100_PER0CLK_PLL6),
+	JH71X0__DIV(JHB100_PER0CLK_1200_SHIFT90_LVDS0, "1200_shift90_lvds0", 2,
+		    JHB100_PER0CLK_PH90_LTPI0),
+	JH71X0__DIV(JHB100_PER0CLK_1200_SHIFT90_LVDS1, "1200_shift90_lvds1", 2,
+		    JHB100_PER0CLK_PH90_LTPI1),
+	JH71X0__DIV(JHB100_PER0CLK_1200_DIV5_CORE0, "1200_div5_core0", 5,
+		    JHB100_PER0CLK_1200_CORE0),
+	JH71X0__DIV(JHB100_PER0CLK_1200_DIV5_CORE1, "1200_div5_core1", 5,
+		    JHB100_PER0CLK_1200_CORE1),
+	JH71X0__DIV(JHB100_PER0CLK_PH0_LTPI0, "ph0_ltpi0", 48,
+		    JHB100_PER0CLK_PLL6),
+	JH71X0__DIV(JHB100_PER0CLK_PH0_LTPI1, "ph0_ltpi1", 48,
+		    JHB100_PER0CLK_PLL6),
+	JH71X0_IDIV(JHB100_PER0CLK_PH90_LTPI0, "ph90_ltpi0", 0, 48,
+		    JHB100_PER0CLK_PLL6),
+	JH71X0_IDIV(JHB100_PER0CLK_PH90_LTPI1, "ph90_ltpi1", 0, 48,
+		    JHB100_PER0CLK_PLL6),
+	JH71X0__DIV(JHB100_PER0CLK_240_CORE_LTPI0, "240_core_ltpi0", 4,
+		    JHB100_PER0CLK_1200_DIV5_CORE0),
+	JH71X0__DIV(JHB100_PER0CLK_240_CORE_LTPI1, "240_core_ltpi1", 4,
+		    JHB100_PER0CLK_1200_DIV5_CORE1),
+	JH71X0_GATE(JHB100_PER0CLK_AXI_DMA_I2C_INIT, "axi_dma_i2c_init", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_400),
+	JH71X0_GATE(JHB100_PER0CLK_AXI_DMA_I3C_INIT, "axi_dma_i3c_init", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_400),
+	JH71X0_GATE(JHB100_PER0CLK_AXI_DMA_UART_INIT, "axi_dma_uart_init", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_CFG_400),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_DMAC0, "core_dmac0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_DMAC1, "core_dmac1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_DMAC2, "core_dmac2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C0, "hdr_tx_i3c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C1, "hdr_tx_i3c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C2, "hdr_tx_i3c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C3, "hdr_tx_i3c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C4, "hdr_tx_i3c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C5, "hdr_tx_i3c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C6, "hdr_tx_i3c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C7, "hdr_tx_i3c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C8, "hdr_tx_i3c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C9, "hdr_tx_i3c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C10, "hdr_tx_i3c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C11, "hdr_tx_i3c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C12, "hdr_tx_i3c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C13, "hdr_tx_i3c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C14, "hdr_tx_i3c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HDR_TX_I3C15, "hdr_tx_i3c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C0, "core_i2c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C1, "core_i2c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C2, "core_i2c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C3, "core_i2c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C4, "core_i2c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C5, "core_i2c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C6, "core_i2c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C7, "core_i2c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C8, "core_i2c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C9, "core_i2c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C10, "core_i2c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C11, "core_i2c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C12, "core_i2c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C13, "core_i2c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C14, "core_i2c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I2C15, "core_i2c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_WDOGCLK_WDT0, "wdogclk_wdt0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_WDOGCLK_WDT1, "wdogclk_wdt1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_WDOGCLK_WDT2, "wdogclk_wdt2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_WDOGCLK_WDT3, "wdogclk_wdt3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_WDOGCLK_WDT_EXTERNAL, "wdogclk_wdt_external",
+		    CLK_IGNORE_UNUSED, JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART4, "sclk_uart4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART5, "sclk_uart5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART6, "sclk_uart6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART7, "sclk_uart7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART8, "sclk_uart8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART9, "sclk_uart9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART10, "sclk_uart10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART11, "sclk_uart11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART12, "sclk_uart12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART13, "sclk_uart13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_SCLK_UART14, "sclk_uart14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_PCLK_DMA_UART_CFG, "pclk_dma_uart_cfg", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_PCLK_DMA_I2C_CFG, "pclk_dma_i2c_cfg", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_PCLK_DMA_I3C_CFG, "pclk_dma_i3c_cfg", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_PCLK_DUALTIMER0, "pclk_dualtimer0", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_PCLK_DUALTIMER1, "pclk_dualtimer1", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_PCLK_DUALTIMER2, "pclk_dualtimer2", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_HCLK_TRNG, "hclk_trng", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C0, "apb_i2c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C1, "apb_i2c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C2, "apb_i2c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C3, "apb_i2c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C4, "apb_i2c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C5, "apb_i2c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C6, "apb_i2c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C7, "apb_i2c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C8, "apb_i2c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C9, "apb_i2c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C10, "apb_i2c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C11, "apb_i2c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C12, "apb_i2c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C13, "apb_i2c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C14, "apb_i2c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2C15, "apb_i2c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF0, "apb_i2cf0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF1, "apb_i2cf1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF2, "apb_i2cf2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF3, "apb_i2cf3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF4, "apb_i2cf4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF5, "apb_i2cf5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF6, "apb_i2cf6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF7, "apb_i2cf7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF8, "apb_i2cf8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF9, "apb_i2cf9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF10, "apb_i2cf10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF11, "apb_i2cf11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF12, "apb_i2cf12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF13, "apb_i2cf13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF14, "apb_i2cf14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I2CF15, "apb_i2cf15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C0, "apb_i3c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C1, "apb_i3c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C2, "apb_i3c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C3, "apb_i3c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C4, "apb_i3c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C5, "apb_i3c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C6, "apb_i3c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C7, "apb_i3c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C8, "apb_i3c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C9, "apb_i3c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C10, "apb_i3c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C11, "apb_i3c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C12, "apb_i3c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C13, "apb_i3c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C14, "apb_i3c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_I3C15, "apb_i3c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART0, "apb_uart0", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART1, "apb_uart1", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART2, "apb_uart2", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART3, "apb_uart3", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART4, "apb_uart4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART5, "apb_uart5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART6, "apb_uart6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART7, "apb_uart7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART8, "apb_uart8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART9, "apb_uart9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART10, "apb_uart10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART11, "apb_uart11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART12, "apb_uart12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART13, "apb_uart13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_APB_UART14, "apb_uart14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C0, "dma_i3c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C1, "dma_i3c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C2, "dma_i3c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C3, "dma_i3c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C4, "dma_i3c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C5, "dma_i3c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C6, "dma_i3c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C7, "dma_i3c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C8, "dma_i3c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C9, "dma_i3c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C10, "dma_i3c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C11, "dma_i3c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C12, "dma_i3c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C13, "dma_i3c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C14, "dma_i3c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_DMA_I3C15, "dma_i3c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C0, "core_i3c0", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C1, "core_i3c1", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C2, "core_i3c2", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C3, "core_i3c3", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C4, "core_i3c4", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C5, "core_i3c5", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C6, "core_i3c6", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C7, "core_i3c7", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C8, "core_i3c8", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C9, "core_i3c9", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C10, "core_i3c10", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C11, "core_i3c11", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C12, "core_i3c12", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C13, "core_i3c13", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C14, "core_i3c14", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_CORE_I3C15, "core_i3c15", CLK_IGNORE_UNUSED,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_DMAC_AXI_PERIPH0_HS_CLK_I2C, "dmac_axi_periph0_hs_clk_i2c",
+		    CLK_IGNORE_UNUSED, JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C0, "main_icg_en_i3c0", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C1, "main_icg_en_i3c1", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C2, "main_icg_en_i3c2", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C3, "main_icg_en_i3c3", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C4, "main_icg_en_i3c4", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C5, "main_icg_en_i3c5", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C6, "main_icg_en_i3c6", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C7, "main_icg_en_i3c7", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C8, "main_icg_en_i3c8", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C9, "main_icg_en_i3c9", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C10, "main_icg_en_i3c10", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C11, "main_icg_en_i3c11", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C12, "main_icg_en_i3c12", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C13, "main_icg_en_i3c13", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C14, "main_icg_en_i3c14", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I3C15, "main_icg_en_i3c15", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_DUALTIMER0, "main_icg_en_dualtimer0",
+		    CLK_IS_CRITICAL, JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_DUALTIMER1, "main_icg_en_dualtimer1",
+		    CLK_IS_CRITICAL, JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_DUALTIMER2, "main_icg_en_dualtimer2",
+		    CLK_IS_CRITICAL, JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_LTPI0, "main_icg_en_ltpi0", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_LTPI1, "main_icg_en_ltpi1", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_DMAC_I2C, "main_icg_en_dmac_i2c",
+		    CLK_IS_CRITICAL, JHB100_PER0CLK_CFG_400),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_DMAC_I3C, "main_icg_en_dmac_i3c",
+		    CLK_IS_CRITICAL, JHB100_PER0CLK_CFG_400),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_DMAC_UART, "main_icg_en_dmac_uart",
+		    CLK_IS_CRITICAL, JHB100_PER0CLK_CFG_400),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL4, "main_icg_en_sol4", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL5, "main_icg_en_sol5", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL6, "main_icg_en_sol6", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL7, "main_icg_en_sol7", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL8, "main_icg_en_sol8", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL9, "main_icg_en_sol9", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL10, "main_icg_en_sol10", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL11, "main_icg_en_sol11", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL12, "main_icg_en_sol12", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL13, "main_icg_en_sol13", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SOL14, "main_icg_en_sol14", 0,
+		    JHB100_PER0CLK_200),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C0, "main_icg_en_i2c0", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C1, "main_icg_en_i2c1", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C2, "main_icg_en_i2c2", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C3, "main_icg_en_i2c3", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C4, "main_icg_en_i2c4", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C5, "main_icg_en_i2c5", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C6, "main_icg_en_i2c6", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C7, "main_icg_en_i2c7", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C8, "main_icg_en_i2c8", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C9, "main_icg_en_i2c9", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C10, "main_icg_en_i2c10", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C11, "main_icg_en_i2c11", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C12, "main_icg_en_i2c12", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C13, "main_icg_en_i2c13", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C14, "main_icg_en_i2c14", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_I2C15, "main_icg_en_i2c15", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_WDT0, "main_icg_en_wdt0", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_WDT1, "main_icg_en_wdt1", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_WDT2, "main_icg_en_wdt2", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_WDT3, "main_icg_en_wdt3", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_WDT_EXTERNAL, "main_icg_en_wdt_external", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART4, "main_icg_en_uart4", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART5, "main_icg_en_uart5", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART6, "main_icg_en_uart6", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART7, "main_icg_en_uart7", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART8, "main_icg_en_uart8", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART9, "main_icg_en_uart9", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART10, "main_icg_en_uart10", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART11, "main_icg_en_uart11", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART12, "main_icg_en_uart12", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART13, "main_icg_en_uart13", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_UART14, "main_icg_en_uart14", CLK_IS_CRITICAL,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_LDO0, "main_icg_en_ldo0", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_LDO1, "main_icg_en_ldo1", 0,
+		    JHB100_PER0CLK_OSC),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SENSORS_PERIPH0, "main_icg_en_sensors_periph0", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_SENSORS_DMAC, "main_icg_en_sensors_dmac", 0,
+		    JHB100_PER0CLK_600_DIV6),
+	JH71X0_GATE(JHB100_PER0CLK_MAIN_ICG_EN_TRNG, "main_icg_en_trng", 0,
+		    JHB100_PER0CLK_NCNOC_TARG),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_per0crg_info = {
+	.clk_data	= jhb100_per0crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_per0crg_clk_data),
+	.ext_clk	= jhb100_per0_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_per0_ext_clk),
+	.rst_name	= "jhb100-r-per0",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_per0crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-per0crg",
+		.data = &jhb100_per0crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_per0crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-per0",
+		.of_match_table = jhb100_per0crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_per0crg_driver);
-- 
2.25.1

[PATCH v5 15/23] dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator

[Changhuang Liang]

Add bindings for the Peripheral-1 clock and reset generator (PER1CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../clock/starfive,jhb100-per1crg.yaml        | 70 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 60 ++++++++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 19 +++++
 3 files changed, 149 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
new file mode 100644
index 000000000000..c72a355ceb34
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-per1crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 Peripheral-1 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-per1crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL7
+      - description: Non Coherent NOC Initiator
+      - description: Configure 800MHz
+      - description: Non Coherent NOC Target
+      - description: Configure 143MHz
+
+  clock-names:
+    items:
+      - const: pll7
+      - const: ncnoc_init
+      - const: cfg_800
+      - const: ncnoc_targ
+      - const: cfg_143
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11b40000 {
+      compatible = "starfive,jhb100-per1crg";
+      reg = <0x11b40000 0x1000>;
+      clocks = <&pll7>,
+               <&sys0crg 68>,
+               <&sys0crg 69>,
+               <&sys2crg 19>,
+               <&sys2crg 22>;
+      clock-names = "pll7", "ncnoc_init",
+                    "cfg_800", "ncnoc_targ",
+                    "cfg_143";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index add2cd093dbd..7f508574177c 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -387,4 +387,64 @@
 #define JHB100_PER0CLK_MAIN_ICG_EN_SENSORS_DMAC		339
 #define JHB100_PER0CLK_MAIN_ICG_EN_TRNG			340
 
+/* PER1CRG clocks */
+#define JHB100_PER1CLK_100				0
+#define JHB100_PER1CLK_1				1
+#define JHB100_PER1CLK_200_DIVN0			2
+#define JHB100_PER1CLK_200_DIVN1			3
+#define JHB100_PER1CLK_200_DIVN2			4
+#define JHB100_PER1CLK_200_DIVN3			5
+#define JHB100_PER1CLK_200_CCLK_DIV			6
+
+#define JHB100_PER1CLK_SGPIO0_PCLK			15
+#define JHB100_PER1CLK_SGPIO0_DCLK			16
+#define JHB100_PER1CLK_SGPIO1_PCLK			17
+#define JHB100_PER1CLK_SGPIO1_DCLK			18
+
+#define JHB100_PER1CLK_EMMC0_BCLK			22
+
+#define JHB100_PER1CLK_EMMC0_CCLK			25
+
+#define JHB100_PER1CLK_DMAC1_1CH_CORE			29
+
+#define JHB100_PER1CLK_DMAC1_1CH_ACLK			31
+
+#define JHB100_PER1CLK_DMAC2_1CH_CORE			33
+
+#define JHB100_PER1CLK_DMAC2_1CH_ACLK			35
+
+#define JHB100_PER1CLK_DMAC3_1CH_CORE			37
+
+#define JHB100_PER1CLK_DMAC3_1CH_ACLK			39
+
+#define JHB100_PER1CLK_DMAC0_2CH_CORE			41
+
+#define JHB100_PER1CLK_DMAC0_2CH_ACLK			43
+
+#define JHB100_PER1CLK_UFS_REF				45
+#define JHB100_PER1CLK_UFS_300				46
+#define JHB100_PER1CLK_UFS_150				47
+#define JHB100_PER1CLK_UFS_400				48
+#define JHB100_PER1CLK_UFS_75				49
+#define JHB100_PER1CLK_UFS_37_5				50
+#define JHB100_PER1CLK_UFS_7_5				51
+#define JHB100_PER1CLK_UFS_1_875			52
+#define JHB100_PER1CLK_UFS_7_143			53
+#define JHB100_PER1CLK_UFS_3_5715			54
+
+#define JHB100_PER1CLK_MAIN_ICG_EN_SFC0			63
+#define JHB100_PER1CLK_MAIN_ICG_EN_SFC1			64
+#define JHB100_PER1CLK_MAIN_ICG_EN_SFC2			65
+#define JHB100_PER1CLK_MAIN_ICG_EN_SPI0			66
+#define JHB100_PER1CLK_MAIN_ICG_EN_SGPIO0		67
+#define JHB100_PER1CLK_MAIN_ICG_EN_SGPIO1		68
+#define JHB100_PER1CLK_MAIN_ICG_EN_SENSORS_PERIPH1	69
+#define JHB100_PER1CLK_MAIN_ICG_EN_EMMC0		70
+#define JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SFC0		71
+#define JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SFC1		72
+#define JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SFC2		73
+#define JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SPI0		74
+#define JHB100_PER1CLK_MAIN_ICG_EN_RAS			75
+#define JHB100_PER1CLK_MAIN_ICG_EN_UFS			76
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index ccfb7616e1a7..cf933a1befbb 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -138,4 +138,23 @@
 #define JHB100_PER0RST_GPIO_IOMUX_PRESETN				73
 #define JHB100_PER0RST_UART_MUX_REG_WRAP				74
 
+/* PER1CRG resets */
+#define JHB100_PER1RST_IOMUX_PRESETN					0
+#define JHB100_PER1RST_SYSCON_PRESETN					1
+#define JHB100_PER1RST_MAIN_RSTN_SFC0					2
+#define JHB100_PER1RST_MAIN_RSTN_SFC1					3
+#define JHB100_PER1RST_MAIN_RSTN_SFC2					4
+#define JHB100_PER1RST_MAIN_RSTN_SPI0					5
+#define JHB100_PER1RST_MAIN_RSTN_PERIPH1_SENSORS			6
+#define JHB100_PER1RST_MAIN_RSTN_SGPIO0					7
+#define JHB100_PER1RST_MAIN_RSTN_SGPIO1					8
+#define JHB100_PER1RST_MAIN_RSTN_EMMC0					9
+#define JHB100_PER1RST_MAIN_RSTN_UFS					10
+#define JHB100_PER1RST_MAIN_RSTN_UFS_PHY				11
+#define JHB100_PER1RST_MAIN_RSTN_DMAC_SFC0				12
+#define JHB100_PER1RST_MAIN_RSTN_DMAC_SFC1				13
+#define JHB100_PER1RST_MAIN_RSTN_DMAC_SFC2				14
+#define JHB100_PER1RST_MAIN_RSTN_DMAC_SPI0				15
+#define JHB100_PER1RST_MAIN_RSTN_PERIPH1_RAS				16
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 16/23] clk: starfive: Add StarFive JHB100 Peripheral-1 clock driver

[Changhuang Liang]

Add driver for the StarFive JHB100 Peripheral-1 clock controller.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 ++
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-per1.c   | 149 ++++++++++++++++++
 3 files changed, 160 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per1.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index b2a05bbb450f..62727ce3aef3 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -83,6 +83,16 @@ config CLK_STARFIVE_JHB100_PER0
 	  Say yes here to support the peripheral-0 clock controller
 	  on the StarFive JHB100 SoC.
 
+config CLK_STARFIVE_JHB100_PER1
+	bool "StarFive JHB100 peripheral-1 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the peripheral-1 clock controller
+	  on the StarFive JHB100 SoC.
+
 config CLK_STARFIVE_JHB100_SYS0
 	bool "StarFive JHB100 system-0 clock support"
 	depends on ARCH_STARFIVE || COMPILE_TEST
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 352717886295..279e0cdfc99b 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)	+= clk-starfive-jh7110-isp.o
 obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
 
 obj-$(CONFIG_CLK_STARFIVE_JHB100_PER0)		+= clk-starfive-jhb100-per0.o
+obj-$(CONFIG_CLK_STARFIVE_JHB100_PER1)		+= clk-starfive-jhb100-per1.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-per1.c b/drivers/clk/starfive/clk-starfive-jhb100-per1.c
new file mode 100644
index 000000000000..82a7255da729
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-per1.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 Peripheral-1 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_PER1CLK_NUM_CLKS			(JHB100_PER1CLK_MAIN_ICG_EN_UFS + 1)
+
+/* external clocks */
+#define JHB100_PER1CLK_PLL7			(JHB100_PER1CLK_NUM_CLKS + 0)
+#define JHB100_PER1CLK_NCNOC_INIT		(JHB100_PER1CLK_NUM_CLKS + 1)
+#define JHB100_PER1CLK_CFG_800			(JHB100_PER1CLK_NUM_CLKS + 2)
+#define JHB100_PER1CLK_NCNOC_TARG		(JHB100_PER1CLK_NUM_CLKS + 3)
+#define JHB100_PER1CLK_CFG_143			(JHB100_PER1CLK_NUM_CLKS + 4)
+
+static const char * const jhb100_per1_ext_clk[] = {
+	"pll7",
+	"ncnoc_init",
+	"cfg_800",
+	"ncnoc_targ",
+	"cfg_143",
+};
+
+static const struct jh71x0_clk_data jhb100_per1crg_clk_data[] = {
+	JH71X0__DIV(JHB100_PER1CLK_100, "per1_100", 8, JHB100_PER1CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER1CLK_1, "per1_1", 100, JHB100_PER1CLK_100),
+	JH71X0__DIV(JHB100_PER1CLK_200_DIVN0, "200_divn0", 256,
+		    JHB100_PER1CLK_CFG_800),
+	JH71X0__DIV(JHB100_PER1CLK_200_DIVN1, "200_divn1", 256,
+		    JHB100_PER1CLK_CFG_800),
+	JH71X0__DIV(JHB100_PER1CLK_200_DIVN2, "200_divn2", 256,
+		    JHB100_PER1CLK_CFG_800),
+	JH71X0__DIV(JHB100_PER1CLK_200_DIVN3, "200_divn3", 256,
+		    JHB100_PER1CLK_CFG_800),
+	JH71X0__DIV(JHB100_PER1CLK_200_CCLK_DIV, "200_cclk_div", 2046,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_SGPIO0_PCLK, "sgpio0_pclk", CLK_IGNORE_UNUSED,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_SGPIO0_DCLK, "sgpio0_dclk", CLK_IGNORE_UNUSED,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_SGPIO1_PCLK, "sgpio1_pclk", CLK_IGNORE_UNUSED,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_SGPIO1_DCLK, "sgpio1_dclk", CLK_IGNORE_UNUSED,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_EMMC0_BCLK, "emmc0_bclk", CLK_IGNORE_UNUSED,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_EMMC0_CCLK, "emmc0_cclk", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC1_1CH_CORE, "dmac1_1ch_core", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC1_1CH_ACLK, "dmac1_1ch_aclk", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC2_1CH_CORE, "dmac2_1ch_core", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC2_1CH_ACLK, "dmac2_1ch_aclk", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC3_1CH_CORE, "dmac3_1ch_core", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC3_1CH_ACLK, "dmac3_1ch_aclk", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC0_2CH_CORE, "dmac0_2ch_core", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_DMAC0_2CH_ACLK, "dmac0_2ch_aclk", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_REF, "ufs_ref", 75,
+		    JHB100_PER1CLK_PLL7),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_300, "ufs_300", 2,
+		    JHB100_PER1CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_150, "ufs_150", 12,
+		    JHB100_PER1CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_400, "ufs_400", 2,
+		    JHB100_PER1CLK_CFG_800),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_75, "ufs_75", 2,
+		    JHB100_PER1CLK_UFS_150),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_37_5, "ufs_37_5", 2,
+		    JHB100_PER1CLK_UFS_75),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_7_5, "ufs_7_5", 10,
+		    JHB100_PER1CLK_UFS_75),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_1_875, "ufs_1_875", 4,
+		    JHB100_PER1CLK_UFS_7_5),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_7_143, "ufs_7_143", 20,
+		    JHB100_PER1CLK_CFG_143),
+	JH71X0__DIV(JHB100_PER1CLK_UFS_3_5715, "ufs_3_5715", 2,
+		    JHB100_PER1CLK_UFS_7_143),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SFC0, "main_icg_en_sfc0", CLK_IS_CRITICAL,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SFC1, "main_icg_en_sfc1", CLK_IS_CRITICAL,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SFC2, "main_icg_en_sfc2", CLK_IS_CRITICAL,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SPI0, "main_icg_en_spi0", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_EMMC0, "main_icg_en_emmc0", 0,
+		    JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SGPIO0, "main_icg_en_sgpio0", 0,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SGPIO1, "main_icg_en_sgpio1", 0,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_SENSORS_PERIPH1, "main_icg_en_sensors_periph1", 0,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SFC0, "main_icg_en_dmac_sfc0",
+		    CLK_IS_CRITICAL, JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SFC1, "main_icg_en_dmac_sfc1",
+		    CLK_IS_CRITICAL, JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SFC2, "main_icg_en_dmac_sfc2",
+		    CLK_IS_CRITICAL, JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_DMAC_SPI0, "main_icg_en_dmac_spi0",
+		    CLK_IS_CRITICAL, JHB100_PER1CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_RAS, "main_icg_en_ras", 0,
+		    JHB100_PER1CLK_100),
+	JH71X0_GATE(JHB100_PER1CLK_MAIN_ICG_EN_UFS, "main_icg_en_ufs", 0,
+		    JHB100_PER1CLK_100),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_per1crg_info = {
+	.clk_data	= jhb100_per1crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_per1crg_clk_data),
+	.ext_clk	= jhb100_per1_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_per1_ext_clk),
+	.rst_name	= "jhb100-r-per1",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_per1crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-per1crg",
+		.data = &jhb100_per1crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_per1crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-per1",
+		.of_match_table = jhb100_per1crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_per1crg_driver);
-- 
2.25.1

[PATCH v5 17/23] dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator

[Changhuang Liang]

Add bindings for the Peripheral-2 clock and reset generator (PER2CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../clock/starfive,jhb100-per2crg.yaml        | 76 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 57 ++++++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 17 +++++
 3 files changed, 150 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
new file mode 100644
index 000000000000..175654645221
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-per2crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 Peripheral-2 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-per2crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Non Coherent NOC Initiator
+      - description: Configure 400MHz
+      - description: Configure 125MHz
+      - description: GMAC2 RGMII RX
+      - description: GMAC2 RMII Reference
+      - description: GMAC3 SGMII TX
+      - description: GMAC3 SGMII RX
+      - description: Main Oscillator (25 MHz)
+
+  clock-names:
+    items:
+      - const: ncnoc_init
+      - const: cfg_400
+      - const: cfg_125
+      - const: gmac2_rgmii_rx
+      - const: gmac2_rmii_ref
+      - const: gmac3_sgmii_tx
+      - const: gmac3_sgmii_rx
+      - const: osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11bc0000 {
+      compatible = "starfive,jhb100-per2crg";
+      reg = <0x11bc0000 0x1000>;
+      clocks = <&sys0crg 52>, <&sys0crg 54>, <&sys0crg 55>,
+               <&per2_gmac2_rgmii_rx>, <&per2_gmac2_rmii_ref>,
+               <&per2_gmac3_sgmii_tx>, <&per2_gmac3_sgmii_rx>,
+               <&osc>;
+      clock-names = "ncnoc_init", "cfg_400", "cfg_125",
+                    "gmac2_rgmii_rx", "gmac2_rmii_ref",
+                    "gmac3_sgmii_tx", "gmac3_sgmii_rx",
+                    "osc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index 7f508574177c..2b2e148ce5ce 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -447,4 +447,61 @@
 #define JHB100_PER1CLK_MAIN_ICG_EN_RAS			75
 #define JHB100_PER1CLK_MAIN_ICG_EN_UFS			76
 
+/* PER2CRG clocks */
+#define JHB100_PER2CLK_300				0
+#define JHB100_PER2CLK_100				1
+#define JHB100_PER2CLK_50				2
+#define JHB100_PER2CLK_GMAC2_RMII_50			3
+#define JHB100_PER2CLK_CAN0_CORE_DIV			4
+#define JHB100_PER2CLK_CAN1_CORE_DIV			5
+#define JHB100_PER2CLK_CAN0_TIMER			6
+#define JHB100_PER2CLK_CAN1_TIMER			7
+
+#define JHB100_PER2CLK_RTC_CORE_DIV			11
+#define JHB100_PER2CLK_GMAC2_RMII_MUX_DLY		12
+#define JHB100_PER2CLK_GMAC2_RMII_DIV			13
+
+#define JHB100_PER2CLK_GMAC2_RGMII_125_MUX		15
+#define JHB100_PER2CLK_GMAC2_RGMII_DIV			16
+#define JHB100_PER2CLK_GMAC2_TX_MUX			17
+#define JHB100_PER2CLK_GMAC2_TX_180_BUF			18
+#define JHB100_PER2CLK_GMAC2_RX_MUX_DLY			19
+#define JHB100_PER2CLK_GMAC2_RX_180_BUF			20
+#define JHB100_PER2CLK_GMAC2_TXCK_MUX_DLY		21
+#define JHB100_PER2CLK_GMAC3_TX_125_MUX			22
+#define JHB100_PER2CLK_GMAC3_RX_125_MUX			23
+#define JHB100_PER2CLK_GMAC3_TX_DIV			24
+#define JHB100_PER2CLK_GMAC3_RX_DIV			25
+#define JHB100_PER2CLK_SENSORS_PERIPH2			26
+
+#define JHB100_PER2CLK_FAN_TACH_PCLK			33
+
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_TX_I		44
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RX_I		45
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_TX_180_I	46
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RX_180_I	47
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_PTP_REF_I	48
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RMII_I	49
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_CSR_I	50
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_ACLK_I	51
+#define JHB100_PER2CLK_RMIIANDRGMII_IOMUX_GMAC2_TXCK	52
+#define JHB100_PER2CLK_ETHER1_SGMII_TX_I		53
+#define JHB100_PER2CLK_ETHER1_SGMII_RX_I		54
+#define JHB100_PER2CLK_ETHER1_SGMII_TX_125_I		55
+#define JHB100_PER2CLK_ETHER1_SGMII_RX_125_I		56
+#define JHB100_PER2CLK_ETHER1_SGMII_PTP_REF_I		57
+#define JHB100_PER2CLK_ETHER1_SGMII_CSR_I		58
+#define JHB100_PER2CLK_ETHER1_SGMII_ACLK_I		59
+#define JHB100_PER2CLK_ETHER1_SGMII_PHY_PCLK_I		60
+#define JHB100_PER2CLK_ETHER1_SGMII_REF_25_I		61
+#define JHB100_PER2CLK_MAIN_ICG_EN_CAN0			62
+#define JHB100_PER2CLK_MAIN_ICG_EN_CAN1			63
+
+#define JHB100_PER2CLK_MAIN_ICG_EN_DMAC_8CH		65
+#define JHB100_PER2CLK_MAIN_ICG_EN_RTC_SCAN		66
+#define JHB100_PER2CLK_MAIN_ICG_EN_ADC0			67
+#define JHB100_PER2CLK_MAIN_ICG_EN_ADC1			68
+#define JHB100_PER2CLK_MAIN_ICG_EN_GMAC2		69
+#define JHB100_PER2CLK_MAIN_ICG_EN_GMAC3		70
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index cf933a1befbb..0965f3798397 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -157,4 +157,21 @@
 #define JHB100_PER1RST_MAIN_RSTN_DMAC_SPI0				15
 #define JHB100_PER1RST_MAIN_RSTN_PERIPH1_RAS				16
 
+/* PER2CRG resets */
+#define JHB100_PER2RST_IOMUX_PRESETN					0
+#define JHB100_PER2RST_POK_IOMUX_PRESETN				1
+#define JHB100_PER2RST_SYSREG_RSTN					2
+#define JHB100_PER2RST_MAIN_RSTN_CAN0					3
+#define JHB100_PER2RST_MAIN_RSTN_CAN1					4
+#define JHB100_PER2RST_FAN_TACH_PRESETN					5
+#define JHB100_PER2RST_MAIN_RSTN_GMAC2					6
+#define JHB100_PER2RST_MAIN_RSTN_GMAC3					7
+#define JHB100_PER2RST_MAIN_RSTN_DMAC_8CH				8
+#define JHB100_PER2RST_MAIN_RSTN_RTC					9
+#define JHB100_PER2RST_ADC0_PRESETN					10
+#define JHB100_PER2RST_ADC0_IOMUX_PRESETN				11
+#define JHB100_PER2RST_ADC1_PRESETN					12
+#define JHB100_PER2RST_ADC1_IOMUX_PRESETN				13
+#define JHB100_PER2RST_MAIN_RSTN_PERIPH2_SENSORS			14
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 18/23] clk: starfive: Add StarFive JHB100 Peripheral-2 clock driver

[Changhuang Liang]

Add driver for the StarFive JHB100 Peripheral-2 clock controller.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 +
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-per2.c   | 174 ++++++++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per2.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 62727ce3aef3..57a3838475e9 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -93,6 +93,16 @@ config CLK_STARFIVE_JHB100_PER1
 	  Say yes here to support the peripheral-1 clock controller
 	  on the StarFive JHB100 SoC.
 
+config CLK_STARFIVE_JHB100_PER2
+	bool "StarFive JHB100 peripheral-2 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the peripheral-2 clock controller
+	  on the StarFive JHB100 SoC.
+
 config CLK_STARFIVE_JHB100_SYS0
 	bool "StarFive JHB100 system-0 clock support"
 	depends on ARCH_STARFIVE || COMPILE_TEST
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 279e0cdfc99b..ca9347d38023 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
 
 obj-$(CONFIG_CLK_STARFIVE_JHB100_PER0)		+= clk-starfive-jhb100-per0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_PER1)		+= clk-starfive-jhb100-per1.o
+obj-$(CONFIG_CLK_STARFIVE_JHB100_PER2)		+= clk-starfive-jhb100-per2.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-per2.c b/drivers/clk/starfive/clk-starfive-jhb100-per2.c
new file mode 100644
index 000000000000..7c4af95a3fc9
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-per2.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 Peripheral-2 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_PER2CLK_NUM_CLKS			(JHB100_PER2CLK_MAIN_ICG_EN_GMAC3 + 1)
+
+/* external clocks */
+#define JHB100_PER2CLK_NCNOC_INIT		(JHB100_PER2CLK_NUM_CLKS + 0)
+#define JHB100_PER2CLK_CFG_400			(JHB100_PER2CLK_NUM_CLKS + 1)
+#define JHB100_PER2CLK_CFG_125			(JHB100_PER2CLK_NUM_CLKS + 2)
+#define JHB100_PER2CLK_GMAC2_RGMII_RX		(JHB100_PER2CLK_NUM_CLKS + 3)
+#define JHB100_PER2CLK_GMAC2_RMII_REF		(JHB100_PER2CLK_NUM_CLKS + 4)
+#define JHB100_PER2CLK_GMAC3_SGMII_TX		(JHB100_PER2CLK_NUM_CLKS + 5)
+#define JHB100_PER2CLK_GMAC3_SGMII_RX		(JHB100_PER2CLK_NUM_CLKS + 6)
+#define JHB100_PER2CLK_OSC			(JHB100_PER2CLK_NUM_CLKS + 7)
+
+static const char * const jhb100_per2_ext_clk[] = {
+	"ncnoc_init",
+	"cfg_400",
+	"cfg_125",
+	"gmac2_rgmii_rx",
+	"gmac2_rmii_ref",
+	"gmac3_sgmii_tx",
+	"gmac3_sgmii_rx",
+	"osc",
+};
+
+static const struct jh71x0_clk_data jhb100_per2crg_clk_data[] = {
+	JH71X0__DIV(JHB100_PER2CLK_300, "per2_300", 2,
+		    JHB100_PER2CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER2CLK_100, "per2_100", 4,
+		    JHB100_PER2CLK_CFG_400),
+	JH71X0__DIV(JHB100_PER2CLK_50, "per2_50", 2,
+		    JHB100_PER2CLK_100),
+	JH71X0__DIV(JHB100_PER2CLK_GMAC2_RMII_50, "gmac2_rmii_50", 2,
+		    JHB100_PER2CLK_100),
+	JH71X0__DIV(JHB100_PER2CLK_CAN0_CORE_DIV, "can0_core_div", 20,
+		    JHB100_PER2CLK_CFG_400),
+	JH71X0__DIV(JHB100_PER2CLK_CAN1_CORE_DIV, "can1_core_div", 20,
+		    JHB100_PER2CLK_CFG_400),
+	JH71X0__DIV(JHB100_PER2CLK_CAN0_TIMER, "can0_timer", 100,
+		    JHB100_PER2CLK_100),
+	JH71X0__DIV(JHB100_PER2CLK_CAN1_TIMER, "can1_timer", 100,
+		    JHB100_PER2CLK_100),
+	JH71X0__DIV(JHB100_PER2CLK_RTC_CORE_DIV, "rtc_core_div", 763,
+		    JHB100_PER2CLK_OSC),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC2_RMII_MUX_DLY, "gmac2_rmii_mux_dly", 0, 2,
+		    JHB100_PER2CLK_GMAC2_RMII_REF,
+		    JHB100_PER2CLK_GMAC2_RMII_50),
+	JH71X0__DIV(JHB100_PER2CLK_GMAC2_RMII_DIV, "gmac2_rmii_div", 20,
+		    JHB100_PER2CLK_GMAC2_RMII_MUX_DLY),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC2_RGMII_125_MUX, "gmac2_rgmii_125_mux", 0, 2,
+		    JHB100_PER2CLK_GMAC2_RGMII_RX,
+		    JHB100_PER2CLK_CFG_125),
+	JH71X0__DIV(JHB100_PER2CLK_GMAC2_RGMII_DIV, "gmac2_rgmii_div", 50,
+		    JHB100_PER2CLK_CFG_125),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC2_TX_MUX, "gmac2_tx_mux", 0, 2,
+		    JHB100_PER2CLK_GMAC2_RMII_DIV,
+		    JHB100_PER2CLK_GMAC2_RGMII_DIV),
+	JH71X0__INV(JHB100_PER2CLK_GMAC2_TX_180_BUF, "gmac2_tx_180_buf",
+		    JHB100_PER2CLK_GMAC2_TX_MUX),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC2_RX_MUX_DLY, "gmac2_rx_mux_dly", 0, 2,
+		    JHB100_PER2CLK_GMAC2_RMII_DIV,
+		    JHB100_PER2CLK_GMAC2_RGMII_125_MUX),
+	JH71X0__INV(JHB100_PER2CLK_GMAC2_RX_180_BUF, "gmac2_rx_180_buf",
+		    JHB100_PER2CLK_GMAC2_RX_MUX_DLY),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC2_TXCK_MUX_DLY, "gmac2_txck_mux_dly", 0, 2,
+		    JHB100_PER2CLK_GMAC2_RMII_50,
+		    JHB100_PER2CLK_GMAC2_TX_MUX),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC3_TX_125_MUX, "gmac3_tx_125_mux", 0, 2,
+		    JHB100_PER2CLK_GMAC3_SGMII_TX,
+		    JHB100_PER2CLK_CFG_125),
+	JH71X0__MUX(JHB100_PER2CLK_GMAC3_RX_125_MUX, "gmac3_rx_125_mux", 0, 2,
+		    JHB100_PER2CLK_GMAC3_SGMII_RX,
+		    JHB100_PER2CLK_CFG_125),
+	JH71X0__DIV(JHB100_PER2CLK_GMAC3_TX_DIV, "gmac3_tx_div", 50,
+		    JHB100_PER2CLK_GMAC3_TX_125_MUX),
+	JH71X0__DIV(JHB100_PER2CLK_GMAC3_RX_DIV, "gmac3_rx_div", 50,
+		    JHB100_PER2CLK_GMAC3_RX_125_MUX),
+	JH71X0_GATE(JHB100_PER2CLK_SENSORS_PERIPH2, "sensors_periph2", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_FAN_TACH_PCLK, "fan_tach_pclk", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_TX_I, "ether0_rmiiandrgmii_tx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC2_TX_MUX),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RX_I, "ether0_rmiiandrgmii_rx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC2_RX_MUX_DLY),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_TX_180_I, "ether0_rmiiandrgmii_tx_180_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC2_TX_180_BUF),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RX_180_I, "ether0_rmiiandrgmii_rx_180_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC2_RX_180_BUF),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_PTP_REF_I, "ether0_rmiiandrgmii_ptp_ref_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_50),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RMII_I, "ether0_rmiiandrgmii_rmii_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC2_RMII_MUX_DLY),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_CSR_I, "ether0_rmiiandrgmii_csr_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER0_RMIIANDRGMII_ACLK_I, "ether0_rmiiandrgmii_aclk_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_300),
+	JH71X0_GATE(JHB100_PER2CLK_RMIIANDRGMII_IOMUX_GMAC2_TXCK, "rmiiandrgmii_iomux_gmac2_txck",
+		    CLK_IS_CRITICAL, JHB100_PER2CLK_GMAC2_TXCK_MUX_DLY),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_TX_I, "ether1_sgmii_tx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC3_TX_DIV),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_RX_I, "ether1_sgmii_rx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC3_RX_DIV),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_TX_125_I, "ether1_sgmii_tx_125_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC3_TX_125_MUX),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_RX_125_I, "ether1_sgmii_rx_125_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_GMAC3_RX_125_MUX),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_PTP_REF_I, "ether1_sgmii_ptp_ref_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_50),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_CSR_I, "ether1_sgmii_csr_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_ACLK_I, "ether1_sgmii_aclk_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_300),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_PHY_PCLK_I, "ether1_sgmii_phy_pclk_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_ETHER1_SGMII_REF_25_I, "ether1_sgmii_ref_25_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER2CLK_OSC),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_CAN0, "main_icg_en_can0", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_CAN1, "main_icg_en_can1", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_DMAC_8CH, "main_icg_en_dmac_8ch", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_RTC_SCAN, "main_icg_en_rtc_scan", CLK_IS_CRITICAL,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_ADC0, "main_icg_en_adc0", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_ADC1, "main_icg_en_adc1", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_GMAC2, "main_icg_en_gmac2", 0,
+		    JHB100_PER2CLK_100),
+	JH71X0_GATE(JHB100_PER2CLK_MAIN_ICG_EN_GMAC3, "main_icg_en_gmac3", 0,
+		    JHB100_PER2CLK_100),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_per2crg_info = {
+	.clk_data	= jhb100_per2crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_per2crg_clk_data),
+	.ext_clk	= jhb100_per2_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_per2_ext_clk),
+	.rst_name	= "jhb100-r-per2",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_per2crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-per2crg",
+		.data = &jhb100_per2crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_per2crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-per2",
+		.of_match_table = jhb100_per2crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_per2crg_driver);
-- 
2.25.1

[PATCH v5 19/23] dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator

[Changhuang Liang]

Add bindings for the Peripheral-3 clock and reset generator (PER3CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../clock/starfive,jhb100-per3crg.yaml        | 76 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 35 +++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   |  9 +++
 3 files changed, 120 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
new file mode 100644
index 000000000000..2c3b9f4146b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-per3crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 Peripheral-3 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jhb100-per3crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Non Coherent NOC Initiator
+      - description: Non Coherent NOC Target
+      - description: Configure 125MHz
+      - description: GMAC0 RMII Reference clock
+      - description: GMAC1 SGMII TX
+      - description: GMAC1 SGMII RX
+      - description: Main Oscillator (25 MHz)
+
+  clock-names:
+    items:
+      - const: ncnoc_init
+      - const: ncnoc_targ
+      - const: cfg_125
+      - const: gmac0_rmii_rclki
+      - const: gmac1_sgmii_tx
+      - const: gmac1_sgmii_rx
+      - const: osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11c40000 {
+      compatible = "starfive,jhb100-per3crg";
+      reg = <0x11c40000 0x1000>;
+      clocks = <&sys0crg 65>,
+               <&sys1crg 18>,
+               <&sys1crg 19>,
+               <&per3_gmac0_rmii_rclki>,
+               <&per3_gmac1_sgmii_tx>,
+               <&per3_gmac1_sgmii_rx>,
+               <&osc>;
+      clock-names = "ncnoc_init", "ncnoc_targ", "cfg_125",
+                    "gmac0_rmii_rclki", "gmac1_sgmii_tx",
+                    "gmac1_sgmii_rx", "osc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index 2b2e148ce5ce..bdf7d628b381 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -504,4 +504,39 @@
 #define JHB100_PER2CLK_MAIN_ICG_EN_GMAC2		69
 #define JHB100_PER2CLK_MAIN_ICG_EN_GMAC3		70
 
+/* PER3CRG clocks */
+#define JHB100_PER3CLK_300				0
+#define JHB100_PER3CLK_200				1
+#define JHB100_PER3CLK_GMAC1_PTP_REF			2
+#define JHB100_PER3CLK_GMAC1_TX_125_MUX			3
+#define JHB100_PER3CLK_GMAC1_TX				4
+#define JHB100_PER3CLK_GMAC1_RX_125_MUX			5
+#define JHB100_PER3CLK_GMAC1_RX				6
+#define JHB100_PER3CLK_GMAC0_PTP_REF			7
+#define JHB100_PER3CLK_GMAC0_RMII_PLL			8
+#define JHB100_PER3CLK_GMAC0_RMII_MUX			9
+#define JHB100_PER3CLK_GMAC0_RMII_MUX_DIV2		10
+
+#define JHB100_PER3CLK_ETHER0_RMII_CLK_TX_I		17
+#define JHB100_PER3CLK_ETHER0_RMII_CLK_RX_I		18
+#define JHB100_PER3CLK_ETHER0_RMII_CLK_PTP_REF_I	19
+#define JHB100_PER3CLK_ETHER0_RMII_CLK_RMII_I		20
+#define JHB100_PER3CLK_ETHER0_RMII_CLK_CSR_I		21
+#define JHB100_PER3CLK_ETHER0_RMII_ACLK_I		22
+#define JHB100_PER3CLK_GMAC0_RMII_RCLKO			23
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_TX_I		24
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_RX_I		25
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_TX_125_I	26
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_RX_125_I	27
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_PTP_REF_I	28
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_REF_25_I	29
+#define JHB100_PER3CLK_ETHER0_SGMII_CLK_CSR_I		30
+#define JHB100_PER3CLK_ETHER0_SGMII_ACLK_I		31
+#define JHB100_PER3CLK_ETHER0_SGMII_PHY_PCLK_I		32
+#define JHB100_PER3CLK_MAIN_ICG_EN_SENSORS_PERIPH3	33
+#define JHB100_PER3CLK_MAIN_ICG_EN_PECI0		34
+#define JHB100_PER3CLK_MAIN_ICG_EN_PECI1		35
+#define JHB100_PER3CLK_MAIN_ICG_EN_GMAC0		36
+#define JHB100_PER3CLK_MAIN_ICG_EN_GMAC1		37
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index 0965f3798397..872a4dd25beb 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -174,4 +174,13 @@
 #define JHB100_PER2RST_ADC1_IOMUX_PRESETN				13
 #define JHB100_PER2RST_MAIN_RSTN_PERIPH2_SENSORS			14
 
+/* PER3CRG resets */
+#define JHB100_PER3RST_SYSREG_RSTN					0
+#define JHB100_PER3RST_MAIN_RSTN_GMAC0					1
+#define JHB100_PER3RST_MAIN_RSTN_GMAC1					2
+#define JHB100_PER3RST_MAIN_RSTN_PECI0					3
+#define JHB100_PER3RST_MAIN_RSTN_PECI1					4
+#define JHB100_PER3RST_MAIN_RSTN_PERIPH3_SENSORS			5
+#define JHB100_PER3RST_IOMUX_PRESETN					6
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1

[PATCH v5 20/23] clk: starfive: Add StarFive JHB100 Peripheral-3 clock driver

[Changhuang Liang]

Add driver for the StarFive JHB100 Peripheral-3 clock controller.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/clk/starfive/Kconfig                  |  10 ++
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-per3.c   | 132 ++++++++++++++++++
 3 files changed, 143 insertions(+)
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per3.c

diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 57a3838475e9..1c9dd5d47cb8 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -103,6 +103,16 @@ config CLK_STARFIVE_JHB100_PER2
 	  Say yes here to support the peripheral-2 clock controller
 	  on the StarFive JHB100 SoC.
 
+config CLK_STARFIVE_JHB100_PER3
+	bool "StarFive JHB100 peripheral-3 clock support"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select CLK_STARFIVE_JH71X0
+	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support the peripheral-3 clock controller
+	  on the StarFive JHB100 SoC.
+
 config CLK_STARFIVE_JHB100_SYS0
 	bool "StarFive JHB100 system-0 clock support"
 	depends on ARCH_STARFIVE || COMPILE_TEST
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index ca9347d38023..2c4554c2e70e 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_PER0)		+= clk-starfive-jhb100-per0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_PER1)		+= clk-starfive-jhb100-per1.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_PER2)		+= clk-starfive-jhb100-per2.o
+obj-$(CONFIG_CLK_STARFIVE_JHB100_PER3)		+= clk-starfive-jhb100-per3.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
 obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
diff --git a/drivers/clk/starfive/clk-starfive-jhb100-per3.c b/drivers/clk/starfive/clk-starfive-jhb100-per3.c
new file mode 100644
index 000000000000..e5688c6efb50
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jhb100-per3.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JHB100 Peripheral-3 Clock Driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ *
+ */
+
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <linux/platform_device.h>
+
+#include "clk-starfive-jh71x0.h"
+
+#define JHB100_PER3CLK_NUM_CLKS			(JHB100_PER3CLK_MAIN_ICG_EN_GMAC1 + 1)
+
+/* external clocks */
+#define JHB100_PER3CLK_NCNOC_INIT		(JHB100_PER3CLK_NUM_CLKS + 0)
+#define JHB100_PER3CLK_NCNOC_TARG		(JHB100_PER3CLK_NUM_CLKS + 1)
+#define JHB100_PER3CLK_CFG_125			(JHB100_PER3CLK_NUM_CLKS + 2)
+#define JHB100_PER3CLK_GMAC0_RMII_RCLKI		(JHB100_PER3CLK_NUM_CLKS + 3)
+#define JHB100_PER3CLK_GMAC1_SGMII_TX		(JHB100_PER3CLK_NUM_CLKS + 4)
+#define JHB100_PER3CLK_GMAC1_SGMII_RX		(JHB100_PER3CLK_NUM_CLKS + 5)
+#define JHB100_PER3CLK_OSC			(JHB100_PER3CLK_NUM_CLKS + 6)
+
+static const char * const jhb100_per3_ext_clk[] = {
+	"ncnoc_init",
+	"ncnoc_targ",
+	"cfg_125",
+	"gmac0_rmii_rclki",
+	"gmac1_sgmii_tx",
+	"gmac1_sgmii_rx",
+	"osc",
+};
+
+static const struct jh71x0_clk_data jhb100_per3crg_clk_data[] = {
+	JH71X0__DIV(JHB100_PER3CLK_300, "per3_300", 256,
+		    JHB100_PER3CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER3CLK_200, "per3_200", 256,
+		    JHB100_PER3CLK_NCNOC_INIT),
+	JH71X0__DIV(JHB100_PER3CLK_GMAC1_PTP_REF, "gmac1_ptp_ref", 2,
+		    JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0__MUX(JHB100_PER3CLK_GMAC1_TX_125_MUX, "gmac1_tx_125_mux", 0, 2,
+		    JHB100_PER3CLK_GMAC1_SGMII_TX,
+		    JHB100_PER3CLK_CFG_125),
+	JH71X0__DIV(JHB100_PER3CLK_GMAC1_TX, "gmac1_tx", 50,
+		    JHB100_PER3CLK_GMAC1_TX_125_MUX),
+	JH71X0__MUX(JHB100_PER3CLK_GMAC1_RX_125_MUX, "gmac1_rx_125_mux", 0, 2,
+		    JHB100_PER3CLK_GMAC1_SGMII_RX,
+		    JHB100_PER3CLK_CFG_125),
+	JH71X0__DIV(JHB100_PER3CLK_GMAC1_RX, "gmac1_rx", 50,
+		    JHB100_PER3CLK_GMAC1_RX_125_MUX),
+	JH71X0__DIV(JHB100_PER3CLK_GMAC0_PTP_REF, "gmac0_ptp_ref", 2,
+		    JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0__DIV(JHB100_PER3CLK_GMAC0_RMII_PLL, "gmac0_rmii_pll", 2,
+		    JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0__MUX(JHB100_PER3CLK_GMAC0_RMII_MUX, "gmac0_rmii_mux", 0, 2,
+		    JHB100_PER3CLK_GMAC0_RMII_PLL,
+		    JHB100_PER3CLK_GMAC0_RMII_RCLKI),
+	JH71X0__DIV(JHB100_PER3CLK_GMAC0_RMII_MUX_DIV2, "gmac0_rmii_mux_div2", 20,
+		    JHB100_PER3CLK_GMAC0_RMII_MUX),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_RMII_CLK_TX_I, "ether0_rmii_clk_tx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC0_RMII_MUX_DIV2),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_RMII_CLK_RX_I, "ether0_rmii_clk_rx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC0_RMII_MUX_DIV2),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_RMII_CLK_PTP_REF_I, "ether0_rmii_clk_ptp_ref_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC0_PTP_REF),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_RMII_CLK_RMII_I, "ether0_rmii_clk_rmii_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC0_RMII_MUX),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_RMII_CLK_CSR_I, "ether0_rmii_clk_csr_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_RMII_ACLK_I, "ether0_rmii_aclk_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_300),
+	JH71X0_GATE(JHB100_PER3CLK_GMAC0_RMII_RCLKO, "gmac0_rmii_rclko",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC0_RMII_PLL),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_TX_I, "ether0_sgmii_clk_tx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC1_TX),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_RX_I, "ether0_sgmii_clk_rx_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC1_RX),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_TX_125_I, "ether0_sgmii_clk_tx_125_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC1_TX_125_MUX),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_RX_125_I, "ether0_sgmii_clk_rx_125_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC1_RX_125_MUX),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_PTP_REF_I, "ether0_sgmii_clk_ptp_ref_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_GMAC1_PTP_REF),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_REF_25_I, "ether0_sgmii_clk_ref_25_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_OSC),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_CLK_CSR_I, "ether0_sgmii_clk_csr_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_ACLK_I, "ether0_sgmii_aclk_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_300),
+	JH71X0_GATE(JHB100_PER3CLK_ETHER0_SGMII_PHY_PCLK_I, "ether0_sgmii_phy_pclk_i",
+		    CLK_IGNORE_UNUSED, JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_MAIN_ICG_EN_SENSORS_PERIPH3, "main_icg_en_sensors_periph3", 0,
+		    JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_MAIN_ICG_EN_PECI0, "main_icg_en_peci0", 0,
+		    JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_MAIN_ICG_EN_PECI1, "main_icg_en_peci1", 0,
+		    JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_MAIN_ICG_EN_GMAC0, "main_icg_en_gmac0",
+		    CLK_IS_CRITICAL, JHB100_PER3CLK_NCNOC_TARG),
+	JH71X0_GATE(JHB100_PER3CLK_MAIN_ICG_EN_GMAC1, "main_icg_en_gmac1",
+		    CLK_IS_CRITICAL, JHB100_PER3CLK_NCNOC_TARG),
+};
+
+static const struct jh71x0_crg_domain_info jhb100_per3crg_info = {
+	.clk_data	= jhb100_per3crg_clk_data,
+	.num_clk	= ARRAY_SIZE(jhb100_per3crg_clk_data),
+	.ext_clk	= jhb100_per3_ext_clk,
+	.num_ext_clk	= ARRAY_SIZE(jhb100_per3_ext_clk),
+	.rst_name	= "jhb100-r-per3",
+	.power_domain	= false,
+};
+
+static const struct of_device_id jhb100_per3crg_match[] = {
+	{
+		.compatible = "starfive,jhb100-per3crg",
+		.data = &jhb100_per3crg_info,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver jhb100_per3crg_driver = {
+	.probe = jh71x0_crg_probe,
+	.driver = {
+		.name = "clk-starfive-jhb100-per3",
+		.of_match_table = jhb100_per3crg_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(jhb100_per3crg_driver);
-- 
2.25.1

[PATCH v5 21/23] reset: starfive: jh71x0: Support discontiguous reset IDs

[Changhuang Liang]

The reset IDs exposed to consumers of the StarFive JHB100 reset
controllers do not map one-to-one to the hardware reset bits.

Add struct jh71x0_reset_info, which describes the number of resets, the
assert/status register offsets and, for discontiguous controllers, a
table mapping reset IDs to hardware bits. Add
reset_starfive_jh71x0_register_with_info() to register such a
controller, and translate the reset ID in the update and status
callbacks when a map is provided.

Existing users of reset_starfive_jh71x0_register() are unaffected.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 .../reset/starfive/reset-starfive-jh71x0.c    | 99 ++++++++++++++++---
 .../reset/starfive/reset-starfive-jh71x0.h    | 19 ++++
 2 files changed, 107 insertions(+), 11 deletions(-)

diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.c b/drivers/reset/starfive/reset-starfive-jh71x0.c
index 29ce3486752f..fd1c755a0017 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.c
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
@@ -14,6 +14,8 @@
 
 #include "reset-starfive-jh71x0.h"
 
+#define JH71X0_RESET_ID_INVALID	ULONG_MAX
+
 struct jh71x0_reset {
 	struct reset_controller_dev rcdev;
 	/* protect registers against concurrent read-modify-write */
@@ -21,6 +23,11 @@ struct jh71x0_reset {
 	void __iomem *assert;
 	void __iomem *status;
 	const u32 *asserted;
+
+	/* Only exists in reset controllers that use the
+	 * reset_starfive_jh71x0_register_with_info helper.
+	 */
+	const struct jh71x0_reset_info *info;
 };
 
 static inline struct jh71x0_reset *
@@ -29,19 +36,40 @@ jh71x0_reset_from(struct reset_controller_dev *rcdev)
 	return container_of(rcdev, struct jh71x0_reset, rcdev);
 }
 
+static unsigned long
+jh71x0_reset_id_to_hw_id(const struct jh71x0_reset_map *map, unsigned int nr_resets,
+			 unsigned long reset_id)
+{
+	for (u32 i = 0; i < nr_resets; i++) {
+		if (map[i].reset_id == reset_id)
+			return map[i].hw_id;
+	}
+
+	return JH71X0_RESET_ID_INVALID;
+}
+
 static int jh71x0_reset_update(struct reset_controller_dev *rcdev,
 			       unsigned long id, bool assert)
 {
 	struct jh71x0_reset *data = jh71x0_reset_from(rcdev);
-	unsigned long offset = id / 32;
-	u32 mask = BIT(id % 32);
-	void __iomem *reg_assert = data->assert + offset * sizeof(u32);
-	void __iomem *reg_status = data->status + offset * sizeof(u32);
-	u32 done = data->asserted ? data->asserted[offset] & mask : 0;
-	u32 value;
-	unsigned long flags;
+	unsigned long offset, flags;
+	void __iomem *reg_assert;
+	void __iomem *reg_status;
+	u32 mask, done, value;
 	int ret;
 
+	if (data->info && data->info->discontiguous) {
+		id = jh71x0_reset_id_to_hw_id(data->info->map, data->info->nr_resets, id);
+		if (id == JH71X0_RESET_ID_INVALID)
+			return -EINVAL;
+	}
+
+	offset = id / 32;
+	mask = BIT(id % 32);
+	reg_assert = data->assert + offset * sizeof(u32);
+	reg_status = data->status + offset * sizeof(u32);
+	done = data->asserted ? data->asserted[offset] & mask : 0;
+
 	if (!assert)
 		done ^= mask;
 
@@ -89,10 +117,20 @@ static int jh71x0_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
 	struct jh71x0_reset *data = jh71x0_reset_from(rcdev);
-	unsigned long offset = id / 32;
-	u32 mask = BIT(id % 32);
-	void __iomem *reg_status = data->status + offset * sizeof(u32);
-	u32 value = readl(reg_status);
+	void __iomem *reg_status;
+	unsigned long offset;
+	u32 mask, value;
+
+	if (data->info && data->info->discontiguous) {
+		id = jh71x0_reset_id_to_hw_id(data->info->map, data->info->nr_resets, id);
+		if (id == JH71X0_RESET_ID_INVALID)
+			return -EINVAL;
+	}
+
+	offset = id / 32;
+	mask = BIT(id % 32);
+	reg_status = data->status + offset * sizeof(u32);
+	value = readl(reg_status);
 
 	if (!data->asserted)
 		return !(value & mask);
@@ -132,3 +170,42 @@ int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_no
 	return devm_reset_controller_register(dev, &data->rcdev);
 }
 EXPORT_SYMBOL_GPL(reset_starfive_jh71x0_register);
+
+int reset_starfive_jh71x0_register_with_info(struct device *dev, struct device_node *of_node,
+					     void __iomem *assert, void __iomem *status,
+					     const u32 *asserted,
+					     const struct jh71x0_reset_info *info,
+					     struct module *owner)
+{
+	struct jh71x0_reset *data;
+	int ret;
+
+	if (info->discontiguous && (!info->map || !info->nr_resets))
+		return dev_err_probe(dev, -EINVAL,
+				     "discontiguous controller without a valid ID map\n");
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->rcdev.ops = &jh71x0_reset_ops;
+	data->rcdev.owner = owner;
+	data->rcdev.nr_resets = info->nr_resets;
+	data->rcdev.dev = dev;
+	data->rcdev.of_node = of_node;
+
+	spin_lock_init(&data->lock);
+	data->assert = assert;
+	data->status = status;
+	data->asserted = asserted;
+	data->info = info;
+
+	ret = devm_reset_controller_register(dev, &data->rcdev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to register reset controller\n");
+
+	dev_info(dev, "Registered %u resets\n", data->rcdev.nr_resets);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(reset_starfive_jh71x0_register_with_info);
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index db7d39a87f87..36f198139602 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -6,9 +6,28 @@
 #ifndef __RESET_STARFIVE_JH71X0_H
 #define __RESET_STARFIVE_JH71X0_H
 
+struct jh71x0_reset_map {
+	unsigned long reset_id;
+	unsigned long hw_id;
+};
+
+struct jh71x0_reset_info {
+	unsigned int nr_resets;
+	unsigned int assert_offset;
+	unsigned int status_offset;
+	bool discontiguous;
+	const struct jh71x0_reset_map *map;
+};
+
 int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
 				   void __iomem *assert, void __iomem *status,
 				   const u32 *asserted, unsigned int nr_resets,
 				   struct module *owner);
 
+int reset_starfive_jh71x0_register_with_info(struct device *dev, struct device_node *of_node,
+					     void __iomem *assert, void __iomem *status,
+					     const u32 *asserted,
+					     const struct jh71x0_reset_info *info,
+					     struct module *owner);
+
 #endif /* __RESET_STARFIVE_JH71X0_H */
-- 
2.25.1

[PATCH v5 22/23] reset: starfive: Add StarFive JHB100 reset driver

[Changhuang Liang]

Add auxiliary reset driver to support StarFive JHB100 SoC.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 MAINTAINERS                                   |   6 +
 drivers/reset/starfive/Kconfig                |   9 +
 drivers/reset/starfive/Makefile               |   1 +
 .../reset/starfive/reset-starfive-jhb100.c    | 302 ++++++++++++++++++
 4 files changed, 318 insertions(+)
 create mode 100644 drivers/reset/starfive/reset-starfive-jhb100.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d22078bcf488..60ced2810e0d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26236,6 +26236,12 @@ S:	Supported
 F:	Documentation/devicetree/bindings/interrupt-controller/starfive,jhb100-intc.yaml
 F:	drivers/irqchip/irq-starfive-jhb100-intc.c
 
+STARFIVE JHB100 RESET CONTROLLER DRIVERS
+M:	Changhuang Liang <changhuang.liang@starfivetech.com>
+S:	Supported
+F:	drivers/reset/starfive/reset-starfive-jhb1*
+F:	include/dt-bindings/reset/starfive,jhb1*.h
+
 STATIC BRANCH/CALL
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Josh Poimboeuf <jpoimboe@kernel.org>
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index d832339f61bc..84baefbaee14 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -19,3 +19,12 @@ config RESET_STARFIVE_JH7110
 	default ARCH_STARFIVE
 	help
 	  This enables the reset controller driver for the StarFive JH7110 SoC.
+
+config RESET_STARFIVE_JHB100
+	bool "StarFive JHB100 Reset Driver"
+	depends on CLK_STARFIVE_JH71X0 || COMPILE_TEST
+	select AUXILIARY_BUS
+	select RESET_STARFIVE_JH71X0
+	default ARCH_STARFIVE
+	help
+	  This enables the reset controller driver for the StarFive JHB100 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index 7a44b66fb9d5..d781103355d3 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_RESET_STARFIVE_JH71X0)		+= reset-starfive-jh71x0.o
 
 obj-$(CONFIG_RESET_STARFIVE_JH7100)		+= reset-starfive-jh7100.o
 obj-$(CONFIG_RESET_STARFIVE_JH7110)		+= reset-starfive-jh7110.o
+obj-$(CONFIG_RESET_STARFIVE_JHB100)		+= reset-starfive-jhb100.o
diff --git a/drivers/reset/starfive/reset-starfive-jhb100.c b/drivers/reset/starfive/reset-starfive-jhb100.c
new file mode 100644
index 000000000000..87a93149609a
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jhb100.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reset driver for the StarFive JHB100 SoC
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ */
+
+#include <dt-bindings/reset/starfive,jhb100-crg.h>
+#include <linux/auxiliary_bus.h>
+#include <soc/starfive/reset-starfive-jh71x0.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#define NUM_RESETS(x)		((x) + 1)
+
+static const struct jh71x0_reset_map jhb100_sys0_map[] = {
+	{ JHB100_SYS0RST_RESOURCE_ARB,					0 },
+	{ JHB100_SYS0RST_SYS0_IOMUX_PRESETN,				3 },
+	{ JHB100_SYS0RST_SYS0H_IOMUX_PRESETN,				4 },
+	{ JHB100_SYS0RST_RST_ADAPTOR_TIMEOUT_RSTN,			5 },
+	{ JHB100_SYS0RST_BMCPCIERP_RSTN_BUS,				14 },
+	{ JHB100_SYS0RST_BMCPCIERP_RSTN_CRG,				15 },
+	{ JHB100_SYS0RST_HOSTSS0_RSTN_BUS_ESPI,				16 },
+	{ JHB100_SYS0RST_HOSTSS0_RSTN_BUS_PCIE,				17 },
+	{ JHB100_SYS0RST_HOSTSS0_RSTN_CRG,				18 },
+	{ JHB100_SYS0RST_BMCPERIPH2_RSTN_CRG,				19 },
+	{ JHB100_SYS0RST_BMCPERIPH2_RSTN_BUS,				20 },
+	{ JHB100_SYS0RST_VCE_RSTN_CRG,					21 },
+	{ JHB100_SYS0RST_VCE_RSTN_BUS,					22 },
+	{ JHB100_SYS0RST_BMCUSB_RSTN_BUS,				23 },
+	{ JHB100_SYS0RST_BMCUSB_RSTN_CRG,				24 },
+};
+
+static const struct jh71x0_reset_info jhb100_sys0_info = {
+	.nr_resets = ARRAY_SIZE(jhb100_sys0_map),
+	.assert_offset = 0x12c,
+	.status_offset = 0x130,
+	.discontiguous = true,
+	.map = jhb100_sys0_map,
+};
+
+static const struct jh71x0_reset_map jhb100_sys1_map[] = {
+	{ JHB100_SYS1RST_SYS1_IOMUX_PRESETN,				1 },
+	{ JHB100_SYS1RST_MAIN_RSTN_CHIPTOP_SENSOR,			5 },
+	{ JHB100_SYS1RST_VOUT_RSTN_HOST0,				8 },
+	{ JHB100_SYS1RST_VOUT_RSTN_HOST1,				9 },
+	{ JHB100_SYS1RST_HOSTSS1_RSTN_BUS_ESPI,				10 },
+	{ JHB100_SYS1RST_HOSTSS1_RSTN_BUS_PCIE,				11 },
+	{ JHB100_SYS1RST_HOSTSS1_RSTN_CRG,				12 },
+	{ JHB100_SYS1RST_BMCPERIPH3_RSTN_CRG,				13 },
+	{ JHB100_SYS1RST_BMCPERIPH3_RSTN_BUS,				14 },
+};
+
+static const struct jh71x0_reset_info jhb100_sys1_info = {
+	.nr_resets = ARRAY_SIZE(jhb100_sys1_map),
+	.assert_offset = 0x54,
+	.status_offset = 0x58,
+	.discontiguous = true,
+	.map = jhb100_sys1_map,
+};
+
+static const struct jh71x0_reset_map jhb100_sys2_map[] = {
+	{ JHB100_SYS2RST_JTAG0_MST_WRAP_HRESETN,			2 },
+	{ JHB100_SYS2RST_JTAG0_MST_WRAP_APB_PRESETN,			3 },
+	{ JHB100_SYS2RST_JTAG1_MST_WRAP_HRESETN,			4 },
+	{ JHB100_SYS2RST_JTAG1_MST_WRAP_APB_PRESETN,			5 },
+	{ JHB100_SYS2RST_HUSBCMN_HOSTCMN_RSTN_BUS_NCNOC_INIT,		8 },
+	{ JHB100_SYS2RST_HUSBCMN_RSTN_HOSTCMN_CRG,			9 },
+	{ JHB100_SYS2RST_HUSBCMN_HOSTUSB0_RSTN_BUS_NCNOC_BMC_TARG,	10 },
+	{ JHB100_SYS2RST_HUSBCMN_HOSTUSB0_RSTN_BUS_NCNOC_HOST_TARG,	11 },
+	{ JHB100_SYS2RST_HUSBCMN_RSTN_BMC_CRG,				12 },
+	{ JHB100_SYS2RST_HUSBCMN_RSTN_HOSTUSB0_CRG,			13 },
+	{ JHB100_SYS2RST_HUSBCMN_HOSTUSB1_RSTN_BUS_NCNOC_BMC_TARG,	14 },
+	{ JHB100_SYS2RST_HUSBCMN_HOSTUSB1_RSTN_BUS_NCNOC_HOST_TARG,	15 },
+	{ JHB100_SYS2RST_HUSBCMN_RSTN_HOSTUSB1_CRG,			16 },
+	{ JHB100_SYS2RST_BMCPERIPH1_RSTN_CRG,				17 },
+	{ JHB100_SYS2RST_BMCPERIPH1_RSTN_BUS,				18 },
+	{ JHB100_SYS2RST_BMCPERIPH0_RSTN_CRG,				19 },
+	{ JHB100_SYS2RST_BMCPERIPH0_RSTN_BUS,				20 },
+	{ JHB100_SYS2RST_GPU0_RSTN_CRG,					21 },
+	{ JHB100_SYS2RST_GPU0_RSTN_BUS,					22 },
+	{ JHB100_SYS2RST_GPU0_HOST_PCIE_RST_N,				23 },
+	{ JHB100_SYS2RST_GPU1_RSTN_CRG,					24 },
+	{ JHB100_SYS2RST_GPU1_RSTN_BUS,					25 },
+	{ JHB100_SYS2RST_GPU1_HOST_PCIE_RST_N,				26 },
+};
+static const struct jh71x0_reset_info jhb100_sys2_info = {
+	.nr_resets = ARRAY_SIZE(jhb100_sys2_map),
+	.assert_offset = 0x88,
+	.status_offset = 0x8c,
+	.discontiguous = true,
+	.map = jhb100_sys2_map,
+};
+
+static const struct jh71x0_reset_map jhb100_per0_map[] = {
+	{ JHB100_PER0RST_MAIN_RSTN_UART4,				1 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART5,				2 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART6,				3 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART7,				4 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART8,				5 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART9,				6 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART10,				7 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART11,				8 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART12,				9 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART13,				10 },
+	{ JHB100_PER0RST_MAIN_RSTN_UART14,				11 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C0,				12 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C1,				13 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C2,				14 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C3,				15 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C4,				16 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C5,				17 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C6,				18 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C7,				19 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C8,				20 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C9,				21 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C10,				22 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C11,				23 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C12,				24 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C13,				25 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C14,				26 },
+	{ JHB100_PER0RST_MAIN_RSTN_I2C15,				27 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C0,				28 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C1,				29 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C2,				30 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C3,				31 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C4,				32 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C5,				33 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C6,				34 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C7,				35 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C8,				36 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C9,				37 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C10,				38 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C11,				39 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C12,				40 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C13,				41 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C14,				42 },
+	{ JHB100_PER0RST_MAIN_RSTN_I3C15,				43 },
+	{ JHB100_PER0RST_MAIN_RSTN_WDT0,				44 },
+	{ JHB100_PER0RST_MAIN_RSTN_WDT1,				45 },
+	{ JHB100_PER0RST_MAIN_RSTN_WDT2,				46 },
+	{ JHB100_PER0RST_MAIN_RSTN_WDT3,				47 },
+	{ JHB100_PER0RST_MAIN_RSTN_WDT4,				48 },
+	{ JHB100_PER0RST_MAIN_RSTN_DUALTIMER0,				49 },
+	{ JHB100_PER0RST_MAIN_RSTN_DUALTIMER1,				50 },
+	{ JHB100_PER0RST_MAIN_RSTN_DUALTIMER2,				51 },
+	{ JHB100_PER0RST_MAIN_RSTN_TRNG,				52 },
+	{ JHB100_PER0RST_MAIN_RSTN_DMAC0,				53 },
+	{ JHB100_PER0RST_MAIN_RSTN_DMAC1,				54 },
+	{ JHB100_PER0RST_MAIN_RSTN_DMAC2,				55 },
+	{ JHB100_PER0RST_MAIN_RSTN_LTPI0,				56 },
+	{ JHB100_PER0RST_MAIN_RSTN_LTPI1,				57 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL4,				58 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL5,				59 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL6,				60 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL7,				61 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL8,				62 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL9,				63 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL10,				64 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL11,				65 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL12,				66 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL13,				67 },
+	{ JHB100_PER0RST_MAIN_RSTN_SOL14,				68 },
+	{ JHB100_PER0RST_MAIN_RSTN_LDO0,				69 },
+	{ JHB100_PER0RST_MAIN_RSTN_LDO1,				70 },
+	{ JHB100_PER0RST_MAIN_RSTN_PERIPH0_SENSORS,			71 },
+	{ JHB100_PER0RST_MAIN_RSTN_DMAC0_SENSORS,			72 },
+	{ JHB100_PER0RST_SYSCON_PRESETN,				73 },
+	{ JHB100_PER0RST_GPIO_IOMUX_PRESETN,				74 },
+	{ JHB100_PER0RST_UART_MUX_REG_WRAP,				75 },
+};
+
+static const struct jh71x0_reset_info jhb100_per0_info = {
+	.nr_resets = ARRAY_SIZE(jhb100_per0_map),
+	.assert_offset = 0x554,
+	.status_offset = 0x560,
+	.discontiguous = true,
+	.map = jhb100_per0_map,
+};
+
+static const struct jh71x0_reset_map jhb100_per1_map[] = {
+	{ JHB100_PER1RST_IOMUX_PRESETN,					0 },
+	{ JHB100_PER1RST_SYSCON_PRESETN,				1 },
+	{ JHB100_PER1RST_MAIN_RSTN_SFC0,				2 },
+	{ JHB100_PER1RST_MAIN_RSTN_SFC1,				3 },
+	{ JHB100_PER1RST_MAIN_RSTN_SFC2,				4 },
+	{ JHB100_PER1RST_MAIN_RSTN_SPI0,				5 },
+	{ JHB100_PER1RST_MAIN_RSTN_PERIPH1_SENSORS,			6 },
+	{ JHB100_PER1RST_MAIN_RSTN_SGPIO0,				7 },
+	{ JHB100_PER1RST_MAIN_RSTN_SGPIO1,				8 },
+	{ JHB100_PER1RST_MAIN_RSTN_EMMC0,				9 },
+	{ JHB100_PER1RST_MAIN_RSTN_UFS,					11 },
+	{ JHB100_PER1RST_MAIN_RSTN_UFS_PHY,				12 },
+	{ JHB100_PER1RST_MAIN_RSTN_DMAC_SFC0,				13 },
+	{ JHB100_PER1RST_MAIN_RSTN_DMAC_SFC1,				14 },
+	{ JHB100_PER1RST_MAIN_RSTN_DMAC_SFC2,				15 },
+	{ JHB100_PER1RST_MAIN_RSTN_DMAC_SPI0,				16 },
+	{ JHB100_PER1RST_MAIN_RSTN_PERIPH1_RAS,				17 },
+};
+
+static const struct jh71x0_reset_info jhb100_per1_info = {
+	.nr_resets = ARRAY_SIZE(jhb100_per1_map),
+	.assert_offset = 0x134,
+	.status_offset = 0x138,
+	.discontiguous = true,
+	.map = jhb100_per1_map,
+};
+
+static const struct jh71x0_reset_map jhb100_per2_map[] = {
+	{ JHB100_PER2RST_IOMUX_PRESETN,					0 },
+	{ JHB100_PER2RST_POK_IOMUX_PRESETN,				1 },
+	{ JHB100_PER2RST_SYSREG_RSTN,					2 },
+	{ JHB100_PER2RST_MAIN_RSTN_CAN0,				3 },
+	{ JHB100_PER2RST_MAIN_RSTN_CAN1,				4 },
+	{ JHB100_PER2RST_FAN_TACH_PRESETN,				5 },
+	{ JHB100_PER2RST_MAIN_RSTN_GMAC2,				7 },
+	{ JHB100_PER2RST_MAIN_RSTN_GMAC3,				8 },
+	{ JHB100_PER2RST_MAIN_RSTN_DMAC_8CH,				9 },
+	{ JHB100_PER2RST_MAIN_RSTN_RTC,					10 },
+	{ JHB100_PER2RST_ADC0_PRESETN,					11 },
+	{ JHB100_PER2RST_ADC0_IOMUX_PRESETN,				12 },
+	{ JHB100_PER2RST_ADC1_PRESETN,					13 },
+	{ JHB100_PER2RST_ADC1_IOMUX_PRESETN,				14 },
+	{ JHB100_PER2RST_MAIN_RSTN_PERIPH2_SENSORS,			15 },
+};
+
+static const struct jh71x0_reset_info jhb100_per2_info = {
+	.nr_resets = ARRAY_SIZE(jhb100_per2_map),
+	.assert_offset = 0x11c,
+	.status_offset = 0x120,
+	.discontiguous = true,
+	.map = jhb100_per2_map,
+};
+
+static const struct jh71x0_reset_info jhb100_per3_info = {
+	.nr_resets = NUM_RESETS(JHB100_PER3RST_IOMUX_PRESETN),
+	.assert_offset = 0x98,
+	.status_offset = 0x9c,
+	.discontiguous = false,
+};
+
+static int jhb100_reset_probe(struct auxiliary_device *adev,
+			      const struct auxiliary_device_id *id)
+{
+	const struct jh71x0_reset_info *info =
+		(const struct jh71x0_reset_info *)(id->driver_data);
+	struct jh71x0_reset_adev *rdev = to_jh71x0_reset_adev(adev);
+	void __iomem *base = rdev->base;
+
+	if (!info || !base)
+		return -ENODEV;
+
+	return reset_starfive_jh71x0_register_with_info(&adev->dev, adev->dev.parent->of_node,
+							base + info->assert_offset,
+							base + info->status_offset,
+							NULL, info, NULL);
+}
+
+static const struct auxiliary_device_id jhb100_reset_ids[] = {
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-sys0",
+		.driver_data = (kernel_ulong_t)&jhb100_sys0_info,
+	},
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-sys1",
+		.driver_data = (kernel_ulong_t)&jhb100_sys1_info,
+	},
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-sys2",
+		.driver_data = (kernel_ulong_t)&jhb100_sys2_info,
+	},
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-per0",
+		.driver_data = (kernel_ulong_t)&jhb100_per0_info,
+	},
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-per1",
+		.driver_data = (kernel_ulong_t)&jhb100_per1_info,
+	},
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-per2",
+		.driver_data = (kernel_ulong_t)&jhb100_per2_info,
+	},
+	{
+		.name = "clk_starfive_jh71x0.jhb100-r-per3",
+		.driver_data = (kernel_ulong_t)&jhb100_per3_info,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, jhb100_reset_ids);
+
+static struct auxiliary_driver jhb100_reset_driver = {
+	.probe		= jhb100_reset_probe,
+	.id_table	= jhb100_reset_ids,
+};
+module_auxiliary_driver(jhb100_reset_driver);
+
+MODULE_AUTHOR("Changhuang Liang <changhuang.liang@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JHB100 reset driver");
+MODULE_LICENSE("GPL");
-- 
2.25.1

[PATCH v5 23/23] riscv: dts: starfive: jhb100: Add clocks and resets nodes

[Changhuang Liang]

Add clocks and resets nodes for JHB100 RISC-V BMC SoC. They contain
sys0crg/sys1crg/sys2crg/per0crg/per1crg/per2crg/per3crg.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jhb100.dtsi | 198 ++++++++++++++++++++++-
 1 file changed, 195 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jhb100.dtsi b/arch/riscv/boot/dts/starfive/jhb100.dtsi
index 14ab83ed4482..6b2863fd3fd3 100644
--- a/arch/riscv/boot/dts/starfive/jhb100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jhb100.dtsi
@@ -4,6 +4,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/starfive,jhb100-crg.h>
+#include <dt-bindings/reset/starfive,jhb100-crg.h>
 
 / {
 	compatible = "starfive,jhb100";
@@ -262,12 +264,96 @@ pmu {
 			<0x00 0x22 0xFFFFFFFF 0xFFFFFF22 0x00007FF8>;	/* Event ID 34 */
 	};
 
-	clk_uart: clock-uart {
-		compatible = "fixed-clock"; /* Initial clock handler for UART */
+	osc: clock-osc {
+		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
+	pll0: clock-pll0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2400000000>;
+	};
+
+	pll1: clock-pll1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};
+
+	pll2: clock-pll2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <903168000>;
+	};
+
+	pll4: clock-pll4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100700000>;
+	};
+
+	pll5: clock-pll5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100700000>;
+	};
+
+	pll6: clock-pll6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2400000000>;
+	};
+
+	pll7: clock-pll7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1950000000>;
+	};
+
+	per2_gmac2_rgmii_rx: clock-per2-gmac2-rgmii-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per2_gmac2_rmii_ref: clock-per2-gmac2-rmii-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	per2_gmac3_sgmii_tx: clock-per2-gmac3-sgmii-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per2_gmac3_sgmii_rx: clock-per2-gmac3-sgmii-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per3_gmac0_rmii_rclki: clock-per3-gmac0-rmii-rclki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	per3_gmac1_sgmii_tx: clock-per3-gmac1-sgmii-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	per3_gmac1_sgmii_rx: clock-per3-gmac1-sgmii-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -310,8 +396,10 @@ bus_nioc: bus {
 			uart6: serial@11982000 {
 				compatible = "starfive,jhb100-uart", "snps,dw-apb-uart";
 				reg = <0x0 0x11982000 0x0 0x400>;
-				clocks = <&clk_uart>, <&clk_uart>;
+				clocks = <&per0crg JHB100_PER0CLK_SCLK_UART6>,
+					 <&per0crg JHB100_PER0CLK_APB_UART6>;
 				clock-names = "baudclk", "apb_pclk";
+				resets = <&per0crg JHB100_PER0RST_MAIN_RSTN_UART6>;
 				interrupt-parent = <&intc>;
 				interrupts = <26>;
 				reg-io-width = <4>;
@@ -319,6 +407,110 @@ uart6: serial@11982000 {
 				status = "disabled";
 			};
 
+			per0crg: clock-controller@11a08000 {
+				compatible = "starfive,jhb100-per0crg";
+				reg = <0x0 0x11a08000 0x0 0x1000>;
+				clocks = <&osc>, <&pll6>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER0_CFG_400>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER0_CFG_800>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER0_NCNOC_INIT>,
+					 <&sys2crg JHB100_SYS2CLK_BMCPER0_NCNOC_TARG>;
+				clock-names = "osc", "pll6", "cfg_400",
+					      "cfg_800", "ncnoc_init",
+					      "ncnoc_targ";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			per1crg: clock-controller@11b40000 {
+				compatible = "starfive,jhb100-per1crg";
+				reg = <0x0 0x11b40000 0x0 0x1000>;
+				clocks = <&pll7>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER1_NCNOC_INIT>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER1_CFG_800>,
+					 <&sys2crg JHB100_SYS2CLK_BMCPER1_NCNOC_TARG>,
+					 <&sys2crg JHB100_SYS2CLK_BMCPER1_CFG_143>;
+				clock-names = "pll7", "ncnoc_init",
+					      "cfg_800", "ncnoc_targ",
+					      "cfg_143";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			per2crg: clock-controller@11bc0000 {
+				compatible = "starfive,jhb100-per2crg";
+				reg = <0x0 0x11bc0000 0x0 0x1000>;
+				clocks = <&sys0crg JHB100_SYS0CLK_BMCPER2_NCNOC_INIT>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER2_CFG_400>,
+					 <&sys0crg JHB100_SYS0CLK_BMCPER2_CFG_125>,
+					 <&per2_gmac2_rgmii_rx>,
+					 <&per2_gmac2_rmii_ref>,
+					 <&per2_gmac3_sgmii_tx>,
+					 <&per2_gmac3_sgmii_rx>,
+					 <&osc>;
+				clock-names = "ncnoc_init", "cfg_400", "cfg_125",
+					      "gmac2_rgmii_rx",
+					      "gmac2_rmii_ref",
+					      "gmac3_sgmii_tx",
+					      "gmac3_sgmii_rx",
+					      "osc";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			per3crg: clock-controller@11c40000 {
+				compatible = "starfive,jhb100-per3crg";
+				reg = <0x0 0x11c40000 0x0 0x1000>;
+				clocks = <&sys0crg JHB100_SYS0CLK_BMCPER3_NCNOC_INIT>,
+					 <&sys1crg JHB100_SYS1CLK_BMCPER3_NCNOC_TARG>,
+					 <&sys1crg JHB100_SYS1CLK_BMCPER3_CFG_125>,
+					 <&per3_gmac0_rmii_rclki>,
+					 <&per3_gmac1_sgmii_tx>,
+					 <&per3_gmac1_sgmii_rx>,
+					 <&osc>;
+				clock-names = "ncnoc_init", "ncnoc_targ", "cfg_125",
+					      "gmac0_rmii_rclki",
+					      "gmac1_sgmii_tx",
+					      "gmac1_sgmii_rx",
+					      "osc";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sys0crg: clock-controller@13000000 {
+				compatible = "starfive,jhb100-sys0crg";
+				reg = <0x0 0x13000000 0x0 0x4000>;
+				clocks = <&osc>, <&pll0>, <&pll1>,
+					 <&pll2>;
+				clock-names = "osc", "pll0", "pll1", "pll2";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sys1crg: clock-controller@13004000 {
+				compatible = "starfive,jhb100-sys1crg";
+				reg = <0x0 0x13004000 0x0 0x4000>;
+				clocks = <&osc>, <&pll0>, <&pll1>,
+					 <&pll2>, <&pll4>, <&pll5>,
+					 <&sys0crg JHB100_SYS0CLK_NPU_NCNOC_INIT>;
+				clock-names = "osc", "pll0", "pll1", "pll2",
+					      "pll4", "pll5", "npu_ncnoc_init";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sys2crg: clock-controller@13008000 {
+				compatible = "starfive,jhb100-sys2crg";
+				reg = <0x0 0x13008000 0x0 0x4000>;
+				clocks = <&osc>, <&pll1>,
+					 <&sys0crg JHB100_SYS0CLK_GPU0_NCNOC_INIT>,
+					 <&sys0crg JHB100_SYS0CLK_GPU1_NCNOC_INIT>;
+				clock-names = "osc", "pll1", "gpu0_ncnoc_init",
+					      "gpu1_ncnoc_init";
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
 			intc: interrupt-controller@13220000 {
 				compatible = "starfive,jhb100-intc";
 				reg = <0x0 0x13220000 0x0 0x80>;
-- 
2.25.1

Re: [PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 7602 bytes --]

FYI clock folks,

On Wed, Sep 30, 2026 at 05:42:54AM -0700, Changhuang Liang wrote:
> The JHB100 SoC includes CRG (Clock and Reset Generator) for multiple
> subsystems:
> 
> The JHB100 SoC is divided into multiple subsystems, and basically
> each subsystem includes a CRG(Clock and Reset Generator):
>  - sys0crg/sys1crg/sys2crg/
>  - per0crg/per1crg/per2crg/per3crg/
>  - voutcrg
>  - vcecrg
>  - gpu0crg/gpu1crg
>  - cpucrg
>  - usbcrg
>  - host0crg/host1crg
>  - pcierpcrg
>  - husb0crg/husb1crg
>  - husbcmncrg
>  - husbd0crg/husbd1crg
>  - npucrg
> 
> In the current series, we will only add the following CRG:
>  - sys0crg/sys1crg/sys2crg/
>  - per0crg/per1crg/per2crg/per3crg/
> 
> The remaining CRG will be implemented in future series.
> 
> This series depends on the series:
> https://lore.kernel.org/all/20260806122553.182449-1-changhuang.liang@starfivetech.com/
> and it has been tested on the StarFive JHB100 EVB-1.

If this revision of the series is acceptable, I'd (although I'm not a
listed driver maintainer) like to send you a PR as I've done in the past
for Starfive stuff so that I can get some of these binding patches that
contain headers as part of a shared tag to be able to unblock a bunch of
the soc tree stuff. With conferences next week I understand that, with it
being -rc5, it's probably this doesn't make v7.4 but I figured it was
worth getting my intentions out there!

Cheers,
Conor.

> 
> changes since v4:
> - Remove patches 1/2/3/4 in v4, and patches 1/2/3 are newly introduced in v5.
> - Refactor the shared clock and reset implementation into JH71x0-specific helpers, updating
>   the affected drivers (These include patches 4/6/8/10/12/14/16/18/20/21/22 in v5.) to use
>   the new interfaces.
> - Split patch 6 in v4 into patch 4 and patch 6 in the current v5.
> - Split patch 21 in v4 into patch 21 and patch 22 in the current v5.
> 
> PATCH 17: (in v5)
> - Add Krzysztof's Reviewed-by tag
> 
> v4: https://lore.kernel.org/all/20260920120044.194901-1-changhuang.liang@starfivetech.com/
> v3: https://lore.kernel.org/all/20260807112923.191627-1-changhuang.liang@starfivetech.com/
> v2: https://lore.kernel.org/all/20260508053632.818548-1-changhuang.liang@starfivetech.com/
> v1: https://lore.kernel.org/all/20260402105523.447523-1-changhuang.liang@starfivetech.com/
> 
> Changhuang Liang (23):
>   clk: starfive: jh7110-sys: Fix memory leak in reset controller
>     register
>   clk: starfive: JH71x0: Move reset controller registration to jh71x0
>     common code
>   reset: starfive: jh7110: Match auxiliary device names to jh71x0 clk
>     driver
>   clk: starfive: jh71x0: Add generic CRG probe helper
>   dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset
>     generator
>   clk: starfive: Add JHB100 System-0 clock generator driver
>   dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset
>     generator
>   clk: starfive: Add JHB100 System-1 clock generator driver
>   dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset
>     generator
>   clk: starfive: Add JHB100 System-2 clock generator driver
>   dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset
>     generator
>   clk: starfive: Introduce idiv ops for inverted divider clocks
>   clk: starfive: Expand the storage of clock parent index
>   clk: starfive: Add StarFive JHB100 Peripheral-0 clock driver
>   dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset
>     generator
>   clk: starfive: Add StarFive JHB100 Peripheral-1 clock driver
>   dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset
>     generator
>   clk: starfive: Add StarFive JHB100 Peripheral-2 clock driver
>   dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset
>     generator
>   clk: starfive: Add StarFive JHB100 Peripheral-3 clock driver
>   reset: starfive: jh71x0: Support discontiguous reset IDs
>   reset: starfive: Add StarFive JHB100 reset driver
>   riscv: dts: starfive: jhb100: Add clocks and resets nodes
> 
>  .../clock/starfive,jhb100-per0crg.yaml        |  70 ++
>  .../clock/starfive,jhb100-per1crg.yaml        |  70 ++
>  .../clock/starfive,jhb100-per2crg.yaml        |  76 +++
>  .../clock/starfive,jhb100-per3crg.yaml        |  76 +++
>  .../clock/starfive,jhb100-sys0crg.yaml        |  63 ++
>  .../clock/starfive,jhb100-sys1crg.yaml        |  71 +++
>  .../clock/starfive,jhb100-sys2crg.yaml        |  64 ++
>  MAINTAINERS                                   |  13 +
>  arch/riscv/boot/dts/starfive/jhb100.dtsi      | 198 +++++-
>  drivers/clk/starfive/Kconfig                  |  72 ++-
>  drivers/clk/starfive/Makefile                 |   8 +
>  .../clk/starfive/clk-starfive-jh7110-aon.c    |   2 +-
>  .../clk/starfive/clk-starfive-jh7110-isp.c    |   2 +-
>  .../clk/starfive/clk-starfive-jh7110-stg.c    |   2 +-
>  .../clk/starfive/clk-starfive-jh7110-sys.c    |  57 +-
>  .../clk/starfive/clk-starfive-jh7110-vout.c   |   2 +-
>  drivers/clk/starfive/clk-starfive-jh7110.h    |   4 -
>  drivers/clk/starfive/clk-starfive-jh71x0.c    | 161 ++++-
>  drivers/clk/starfive/clk-starfive-jh71x0.h    |  24 +-
>  .../clk/starfive/clk-starfive-jhb100-per0.c   | 599 ++++++++++++++++++
>  .../clk/starfive/clk-starfive-jhb100-per1.c   | 149 +++++
>  .../clk/starfive/clk-starfive-jhb100-per2.c   | 174 +++++
>  .../clk/starfive/clk-starfive-jhb100-per3.c   | 132 ++++
>  .../clk/starfive/clk-starfive-jhb100-sys0.c   | 150 +++++
>  .../clk/starfive/clk-starfive-jhb100-sys1.c   | 105 +++
>  .../clk/starfive/clk-starfive-jhb100-sys2.c   | 129 ++++
>  drivers/reset/starfive/Kconfig                |   9 +
>  drivers/reset/starfive/Makefile               |   1 +
>  .../reset/starfive/reset-starfive-jh7110.c    |  10 +-
>  .../reset/starfive/reset-starfive-jh71x0.c    |  99 ++-
>  .../reset/starfive/reset-starfive-jh71x0.h    |  19 +
>  .../reset/starfive/reset-starfive-jhb100.c    | 302 +++++++++
>  .../dt-bindings/clock/starfive,jhb100-crg.h   | 542 ++++++++++++++++
>  .../dt-bindings/reset/starfive,jhb100-crg.h   | 186 ++++++
>  34 files changed, 3553 insertions(+), 88 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per0.c
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per1.c
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per2.c
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-per3.c
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys0.c
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys1.c
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys2.c
>  create mode 100644 drivers/reset/starfive/reset-starfive-jhb100.c
>  create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
>  create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h
> 
> --
> 2.25.1

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[Brian Masney]

Hi Conor,

On Wed, Sep 30, 2026 at 11:43:22PM +0100, Conor Dooley wrote:
> FYI clock folks,
> 
> On Wed, Sep 30, 2026 at 05:42:54AM -0700, Changhuang Liang wrote:
> > The JHB100 SoC includes CRG (Clock and Reset Generator) for multiple
> > subsystems:
> > 
> > The JHB100 SoC is divided into multiple subsystems, and basically
> > each subsystem includes a CRG(Clock and Reset Generator):
> >  - sys0crg/sys1crg/sys2crg/
> >  - per0crg/per1crg/per2crg/per3crg/
> >  - voutcrg
> >  - vcecrg
> >  - gpu0crg/gpu1crg
> >  - cpucrg
> >  - usbcrg
> >  - host0crg/host1crg
> >  - pcierpcrg
> >  - husb0crg/husb1crg
> >  - husbcmncrg
> >  - husbd0crg/husbd1crg
> >  - npucrg
> > 
> > In the current series, we will only add the following CRG:
> >  - sys0crg/sys1crg/sys2crg/
> >  - per0crg/per1crg/per2crg/per3crg/
> > 
> > The remaining CRG will be implemented in future series.
> > 
> > This series depends on the series:
> > https://lore.kernel.org/all/20260806122553.182449-1-changhuang.liang@starfivetech.com/
> > and it has been tested on the StarFive JHB100 EVB-1.
> 
> If this revision of the series is acceptable, I'd (although I'm not a
> listed driver maintainer) like to send you a PR as I've done in the past
> for Starfive stuff so that I can get some of these binding patches that
> contain headers as part of a shared tag to be able to unblock a bunch of
> the soc tree stuff. With conferences next week I understand that, with it
> being -rc5, it's probably this doesn't make v7.4 but I figured it was
> worth getting my intentions out there!

I am going through this series now, and I have a few minor changes to
the clk drivers themselves.

Feel free to send a pull for the bindings and headers though.

Brian

Re: [PATCH v5 04/23] clk: starfive: jh71x0: Add generic CRG probe helper

[Brian Masney]

Hi Changhuang,

> The StarFive JHB100 SoC has several clock and reset generators (CRGs)
> which share the same probe flow: map the registers, register all the
> clocks described by a table, add the clock provider and register the
> auxiliary reset device.
> 
> Add jh71x0_crg_probe() together with struct jh71x0_crg_domain_info so
> that each CRG driver only needs to provide its clock table, external
> clock names and reset auxiliary device name. The reset auxiliary device
> is registered with jh71x0_reset_controller_register().
> 
> The clock index space of these CRGs is sparse, so also make
> jh71x0_clk_get() reject indexes that were never registered when the
> domain info is available.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
> index 2cc71f49ddee..bb7706ede1a6 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.c
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
> @@ -10,6 +10,7 @@
>  #include <linux/debugfs.h>
>  #include <linux/device.h>
>  #include <linux/io.h>
> +#include <linux/pm_runtime.h>

Add #include <linux/property.h> for device_get_match_data()

>  #include <linux/slab.h>
>  #include <soc/starfive/reset-starfive-jh71x0.h>
>  
> @@ -334,10 +335,14 @@ struct clk_hw *jh71x0_clk_get(struct of_phandle_args *clkspec, void *data)
>  	struct jh71x0_clk_priv *priv = data;
>  	unsigned int idx = clkspec->args[0];
>  
> -	if (idx < priv->num_reg)
> -		return &priv->reg[idx].hw;
> +	if (idx >= priv->num_reg)
> +		return ERR_PTR(-EINVAL);
>  
> -	return ERR_PTR(-EINVAL);
> +	/* Index space is sparse: reject holes that were never registered. */
> +	if (priv->info && !priv->info->clk_data[idx].name)
> +		return ERR_PTR(-ENOENT);
> +
> +	return &priv->reg[idx].hw;
>  }
>  EXPORT_SYMBOL_GPL(jh71x0_clk_get);
>  
> @@ -391,3 +396,87 @@ int jh71x0_reset_controller_register(struct jh71x0_clk_priv *priv,
>  					jh71x0_reset_unregister_adev, adev);
>  }
>  EXPORT_SYMBOL_GPL(jh71x0_reset_controller_register);
> +
> +int jh71x0_crg_probe(struct platform_device *pdev)
> +{
> +	const struct jh71x0_crg_domain_info *info;
> +	struct jh71x0_clk_priv *priv;
> +	unsigned int idx;
> +	int ret;
> +
> +	info = device_get_match_data(&pdev->dev);
> +	if (!info)
> +		return -ENODEV;
> +
> +	priv = devm_kzalloc(&pdev->dev, struct_size(priv, reg, info->num_clk),
> +			    GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&priv->rmw_lock);
> +	priv->info = info;
> +	priv->num_reg = info->num_clk;
> +	priv->dev = &pdev->dev;
> +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	if (info->power_domain) {
> +		ret = devm_pm_runtime_enable(priv->dev);
> +		if (ret)
> +			return dev_err_probe(priv->dev, ret,
> +					     "failed to enable runtime PM\n");
> +	}
> +
> +	for (idx = 0; idx < info->num_clk; idx++) {
> +		u32 max = info->clk_data[idx].max;
> +		struct clk_parent_data parents[4] = {};
> +		struct clk_init_data init = {
> +			.name = info->clk_data[idx].name,
> +			.ops = starfive_jh71x0_clk_ops(max),
> +			.parent_data = parents,
> +			.num_parents =
> +				((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
> +			.flags = info->clk_data[idx].flags,
> +		};
> +		struct jh71x0_clk *clk = &priv->reg[idx];
> +		unsigned int i;
> +
> +		if (!init.name)
> +			continue;
> +
> +		if (init.num_parents > ARRAY_SIZE(parents))
> +			return dev_err_probe(priv->dev, -EINVAL,
> +					     "clock %s: too many parents (%u > %zu)\n",
> +					     init.name, init.num_parents, ARRAY_SIZE(parents));
> +
> +		for (i = 0; i < init.num_parents; i++) {
> +			unsigned int pidx = info->clk_data[idx].parents[i];
> +
> +			if (pidx < info->num_clk) {
> +				parents[i].hw = &priv->reg[pidx].hw;
> +			} else {
> +				if (pidx - info->num_clk >= info->num_ext_clk)
> +					return -EINVAL;

What do you think about adding a dev_err_probe() here as well to make it
easier to troubleshoot any failures here?

Brian

-- 
Brian Masney <bmasney@redhat.com>

Re: [PATCH v5 06/23] clk: starfive: Add JHB100 System-0 clock generator driver

[Brian Masney]

Hi Changhuang,

> Add support for JHB100 System-0 clock generator (SYS0CRG).
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4f72b4ac27ee..a0e5b4df96aa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -26097,6 +26097,13 @@ S:	Supported
>  F:	Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
>  F:	drivers/phy/starfive/phy-jh7110-dphy-rx.c
>  
> +STARFIVE JHB100 CLOCK DRIVERS
> +M:     Changhuang Liang <changhuang.liang@starfivetech.com>
> +S:     Supported
> +F:     Documentation/devicetree/bindings/clock/starfive,jhb1*.yaml
> +F:     drivers/clk/starfive/clk-starfive-jhb1*
> +F:     include/dt-bindings/clock/starfive,jhb1*.h

The spacing after the : doesn't line up with the other sections. It
looks like this is using spaces instead of a tab.

Brian

-- 
Brian Masney <bmasney@redhat.com>

Re: [PATCH v5 10/23] clk: starfive: Add JHB100 System-2 clock generator driver

[Brian Masney]

Hi Changhuang,

> Add support for JHB100 System-2 clock generator (SYS2CRG).
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
>
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index 11da8bcc4046..cfaac934a8e0 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -92,3 +92,13 @@ config CLK_STARFIVE_JHB100_SYS1
>  	help
>  	  Say yes here to support the system-1 clock controller on the
>  	  StarFive JHB100 SoC.
> +
> +config CLK_STARFIVE_JHB100_SYS2
> +	bool "StarFive JHB100 system-2 clock support"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	select CLK_STARFIVE_JH71X0
> +	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
> +	default ARCH_STARFIVE
> +	help
> +	  Say yes here to support the system-2 clock controller on the
> +	  StarFive JHB100 SoC.
> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
> index 0061550e0f7e..29cdef20575e 100644
> --- a/drivers/clk/starfive/Makefile
> +++ b/drivers/clk/starfive/Makefile
> @@ -13,3 +13,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
>  
>  obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
>  obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
> +obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
> diff --git a/drivers/clk/starfive/clk-starfive-jhb100-sys2.c b/drivers/clk/starfive/clk-starfive-jhb100-sys2.c
> new file mode 100644
> index 000000000000..a2c7e8eba9b6
> --- /dev/null
> +++ b/drivers/clk/starfive/clk-starfive-jhb100-sys2.c
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * StarFive JHB100 System-2 Clock Driver
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + *
> + * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/starfive,jhb100-crg.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-starfive-jh71x0.h"
> +
> +#define JHB100_SYS2CLK_NUM_CLKS			(JHB100_SYS2CLK_MAIN_ICG_EN_JTAG1 + 1)
> +
> +/* external clocks */
> +#define JHB100_SYS2CLK_OSC			(JHB100_SYS2CLK_NUM_CLKS + 0)
> +#define JHB100_SYS2CLK_PLL1			(JHB100_SYS2CLK_NUM_CLKS + 1)
> +#define JHB100_SYS2CLK_GPU0_NCNOC_INIT		(JHB100_SYS2CLK_NUM_CLKS + 2)
> +#define JHB100_SYS2CLK_GPU1_NCNOC_INIT		(JHB100_SYS2CLK_NUM_CLKS + 3)
> +
> +static const char * const jhb100_sys2_ext_clk[] = {
> +	"osc",
> +	"pll1",
> +	"gpu0_ncnoc_init",
> +	"gpu1_ncnoc_init",
> +};
> +
> +static const struct jh71x0_clk_data jhb100_sys2crg_clk_data[] = {
> +	/* jtag mst*/
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_HCLK, "jtagm0_hclk", 6,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_HCLK, "jtagm1_hclk", 6,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_ATPG, "jtagm0_ATPG", 12,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_ATPG, "jtagm1_ATPG", 12,
> +		    JHB100_SYS2CLK_PLL1),

The ATPG portion of the clock name is uppercase. Can this be lowercase
for consistency?

Brian

-- 
Brian Masney <bmasney@redhat.com>

Re: [PATCH v5 12/23] clk: starfive: Introduce idiv ops for inverted divider clocks

[Brian Masney]

Hi Changhuang,

> Some StarFive clocks only advertise the divider and invert capabilities
> (via JH71X0_CLK_INVERT, without ENABLE). Add the JH71X0_IDIV() macro
> to declare such clocks, and jh71x0_clk_idiv_ops, which combines the
> divider rate operations with get_phase/set_phase.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
> index bb7706ede1a6..1f98f1f8f0a5 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.c
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
> @@ -302,6 +302,15 @@ static const struct clk_ops jh71x0_clk_inv_ops = {
>  	.debug_init = jh71x0_clk_debug_init,
>  };
>  
> +static const struct clk_ops jh71x0_clk_idiv_ops = {
> +	.get_phase = jh71x0_clk_get_phase,
> +	.set_phase = jh71x0_clk_set_phase,
> +	.recalc_rate = jh71x0_clk_recalc_rate,
> +	.determine_rate = jh71x0_clk_determine_rate,
> +	.set_rate = jh71x0_clk_set_rate,
> +	.debug_init = jh71x0_clk_debug_init,
> +};
> +
>  const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
>  {
>  	if (max & JH71X0_CLK_DIV_MASK) {
> @@ -312,6 +321,9 @@ const struct clk_ops *starfive_jh71x0_clk_ops(u32 max)
>  		}
>  		if (max & JH71X0_CLK_ENABLE)
>  			return &jh71x0_clk_gdiv_ops;
> +		else if (max & JH71X0_CLK_INVERT)
> +			return &jh71x0_clk_idiv_ops;
> +
>  		if (max == JH71X0_CLK_FRAC_MAX)
>  			return &jh71x0_clk_fdiv_ops;

else if so that it's with the block above.

Brian

-- 
Brian Masney <bmasney@redhat.com>

Re: [PATCH v5 11/23] dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator

[Brian Masney]

Hi Changhuang,

> Add bindings for the Peripheral-0 clock and reset generator (PER0CRG)
> on the JHB100 RISC-V SoC by StarFive Ltd.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
>
> diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
> new file mode 100644
> index 000000000000..db43e03fd60c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/starfive,jhb100-per0crg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JHB100 Peripheral-0 Clock and Reset Generator
> +
> +maintainers:
> +  - Changhuang Liang <changhuang.liang@starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: starfive,jhb100-per0crg
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Main Oscillator (25 MHz)
> +      - description: PLL6
> +      - description: Configure 400MHz
> +      - description: Configure 800MHZ

There's a mismatch here in the casing of the units. One line has MHz and
the other has MHZ.

Brian

-- 
Brian Masney <bmasney@redhat.com>

Re: [PATCH v5 10/23] clk: starfive: Add JHB100 System-2 clock generator driver

[Brian Masney]

Hi Changhuang,

On Wed, Sep 30, 2026 at 05:43:04AM -0700, Changhuang Liang wrote:
> Add support for JHB100 System-2 clock generator (SYS2CRG).
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
> ---
>  drivers/clk/starfive/Kconfig                  |  10 ++
>  drivers/clk/starfive/Makefile                 |   1 +
>  .../clk/starfive/clk-starfive-jhb100-sys2.c   | 129 ++++++++++++++++++
>  3 files changed, 140 insertions(+)
>  create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-sys2.c
> 
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index 11da8bcc4046..cfaac934a8e0 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -92,3 +92,13 @@ config CLK_STARFIVE_JHB100_SYS1
>  	help
>  	  Say yes here to support the system-1 clock controller on the
>  	  StarFive JHB100 SoC.
> +
> +config CLK_STARFIVE_JHB100_SYS2
> +	bool "StarFive JHB100 system-2 clock support"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	select CLK_STARFIVE_JH71X0
> +	select RESET_STARFIVE_JHB100 if RESET_CONTROLLER
> +	default ARCH_STARFIVE
> +	help
> +	  Say yes here to support the system-2 clock controller on the
> +	  StarFive JHB100 SoC.
> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
> index 0061550e0f7e..29cdef20575e 100644
> --- a/drivers/clk/starfive/Makefile
> +++ b/drivers/clk/starfive/Makefile
> @@ -13,3 +13,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT)	+= clk-starfive-jh7110-vout.o
>  
>  obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0)		+= clk-starfive-jhb100-sys0.o
>  obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1)		+= clk-starfive-jhb100-sys1.o
> +obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2)		+= clk-starfive-jhb100-sys2.o
> diff --git a/drivers/clk/starfive/clk-starfive-jhb100-sys2.c b/drivers/clk/starfive/clk-starfive-jhb100-sys2.c
> new file mode 100644
> index 000000000000..a2c7e8eba9b6
> --- /dev/null
> +++ b/drivers/clk/starfive/clk-starfive-jhb100-sys2.c
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * StarFive JHB100 System-2 Clock Driver
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + *
> + * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/starfive,jhb100-crg.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-starfive-jh71x0.h"
> +
> +#define JHB100_SYS2CLK_NUM_CLKS			(JHB100_SYS2CLK_MAIN_ICG_EN_JTAG1 + 1)
> +
> +/* external clocks */
> +#define JHB100_SYS2CLK_OSC			(JHB100_SYS2CLK_NUM_CLKS + 0)
> +#define JHB100_SYS2CLK_PLL1			(JHB100_SYS2CLK_NUM_CLKS + 1)
> +#define JHB100_SYS2CLK_GPU0_NCNOC_INIT		(JHB100_SYS2CLK_NUM_CLKS + 2)
> +#define JHB100_SYS2CLK_GPU1_NCNOC_INIT		(JHB100_SYS2CLK_NUM_CLKS + 3)
> +
> +static const char * const jhb100_sys2_ext_clk[] = {
> +	"osc",
> +	"pll1",
> +	"gpu0_ncnoc_init",
> +	"gpu1_ncnoc_init",
> +};
> +
> +static const struct jh71x0_clk_data jhb100_sys2crg_clk_data[] = {
> +	/* jtag mst*/
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_HCLK, "jtagm0_hclk", 6,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_HCLK, "jtagm1_hclk", 6,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_ATPG, "jtagm0_ATPG", 12,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_ATPG, "jtagm1_ATPG", 12,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM0_ATPG_TCLOCK, "jtagm0_atpg_tclock", 2,
> +		    JHB100_SYS2CLK_JTAGM0_ATPG),
> +	JH71X0__DIV(JHB100_SYS2CLK_JTAGM1_ATPG_TCLOCK, "jtagm1_atpg_tclock", 2,
> +		    JHB100_SYS2CLK_JTAGM1_ATPG),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_HCLK, "jtag0_mst_wrap_hclk",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_HCLK),

Can you leave a comment somewhere about why CLK_IGNORE_UNUSED is on some
of these clocks? We may be able to deprecate this flag once some
variation of the clk sync_state support lands:

https://lore.kernel.org/linux-clk/20260626-clk-sync-state-v1-0-4156d8196dc8@redhat.com/


> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_CLK_JTAG, "jtag0_mst_wrap_clk_jtag",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_HCLK),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_APB_PCLK, "jtag0_mst_wrap_apb_pclk",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_ATPG),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG0_MST_WRAP_ATPG_TCLOCK, "jtag0_mst_wrap_atpg_tclock",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM0_ATPG),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_HCLK, "jtag1_mst_wrap_hclk",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_HCLK),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_CLK_JTAG, "jtag1_mst_wrap_clk_jtag",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_HCLK),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_APB_PCLK, "jtag1_mst_wrap_apb_pclk",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_ATPG),
> +	JH71X0_GATE(JHB100_SYS2CLK_JTAG1_MST_WRAP_ATPG_TCLOCK, "jtag1_mst_wrap_atpg_tclock",
> +		    CLK_IGNORE_UNUSED, JHB100_SYS2CLK_JTAGM1_ATPG),
> +	/* hostusbcmn */
> +	JH71X0__DIV(JHB100_SYS2CLK_HOSTUSB_NCNOC_TARG, "hostusb_ncnoc_targ", 12,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_HOSTUSBCMN_CFG_500, "hostusbcmn_cfg_500", 4,
> +		    JHB100_SYS2CLK_PLL1),
> +	/* bmcperiph1 */
> +	JH71X0__DIV(JHB100_SYS2CLK_BMCPER1_NCNOC_TARG, "bmcper1_ncnoc_targ", 6,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_BMCPER1_CFG_250, "bmcper1_cfg_250", 5,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0__DIV(JHB100_SYS2CLK_BMCPER1_CFG_143_DFT, "bmcper1_cfg_143_dft", 8,
> +		    JHB100_SYS2CLK_PLL1),
> +	JH71X0_GATE(JHB100_SYS2CLK_BMCPER1_CFG_143, "bmcper1_cfg_143", CLK_IS_CRITICAL,

Also please leave a comment why CLK_IS_CRITICAL is needed as well for
these particular clocks.

Brian

Re: [PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 5643 bytes --]

On Fri, Oct 02, 2026 at 02:30:12PM -0400, Brian Masney wrote:
> Hi Conor,
> 
> On Wed, Sep 30, 2026 at 11:43:22PM +0100, Conor Dooley wrote:
> > FYI clock folks,
> > 
> > On Wed, Sep 30, 2026 at 05:42:54AM -0700, Changhuang Liang wrote:
> > > The JHB100 SoC includes CRG (Clock and Reset Generator) for multiple
> > > subsystems:
> > > 
> > > The JHB100 SoC is divided into multiple subsystems, and basically
> > > each subsystem includes a CRG(Clock and Reset Generator):
> > >  - sys0crg/sys1crg/sys2crg/
> > >  - per0crg/per1crg/per2crg/per3crg/
> > >  - voutcrg
> > >  - vcecrg
> > >  - gpu0crg/gpu1crg
> > >  - cpucrg
> > >  - usbcrg
> > >  - host0crg/host1crg
> > >  - pcierpcrg
> > >  - husb0crg/husb1crg
> > >  - husbcmncrg
> > >  - husbd0crg/husbd1crg
> > >  - npucrg
> > > 
> > > In the current series, we will only add the following CRG:
> > >  - sys0crg/sys1crg/sys2crg/
> > >  - per0crg/per1crg/per2crg/per3crg/
> > > 
> > > The remaining CRG will be implemented in future series.
> > > 
> > > This series depends on the series:
> > > https://lore.kernel.org/all/20260806122553.182449-1-changhuang.liang@starfivetech.com/
> > > and it has been tested on the StarFive JHB100 EVB-1.
> > 
> > If this revision of the series is acceptable, I'd (although I'm not a
> > listed driver maintainer) like to send you a PR as I've done in the past
> > for Starfive stuff so that I can get some of these binding patches that
> > contain headers as part of a shared tag to be able to unblock a bunch of
> > the soc tree stuff. With conferences next week I understand that, with it
> > being -rc5, it's probably this doesn't make v7.4 but I figured it was
> > worth getting my intentions out there!
> 
> I am going through this series now, and I have a few minor changes to
> the clk drivers themselves.
> 
> Feel free to send a pull for the bindings and headers though.

Okay, PR below.

I won't put this tag into my linux-next branch until the drivers are in
the clock tree, but it'll let me get my ducks in a row, particularly
beneficial given next week I'll be somewhat AFK! Duck alignment is
currently ongoing in the "jhb100" branch in my repo..

Thanks Brian, Conor.

btw, will you be at LPC or OSSEU?

The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:

  Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ tags/clk-starfive-jhb100

for you to fetch changes up to 17986e31f3b6142c302c8f9af16540422787daf9:

  dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator (2026-10-02 20:58:09 +0100)

----------------------------------------------------------------
jhb100 clock binding shared tag

This is a shared tag for the Starfive jhb100 clock bindings, between the
riscv soc tree and clock tree.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

----------------------------------------------------------------
Changhuang Liang (7):
      dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator

 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml |  70 +++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml |  70 +++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml |  76 +++++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml |  76 +++++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml |  63 ++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml |  71 +++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml |  64 +++++++++++++++++++++++++
 include/dt-bindings/clock/starfive,jhb100-crg.h                      | 542 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/reset/starfive,jhb100-crg.h                      | 186 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 1218 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
 create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
 create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 6683 bytes --]

On Fri, Oct 02, 2026 at 09:11:44PM +0100, Conor Dooley wrote:
> On Fri, Oct 02, 2026 at 02:30:12PM -0400, Brian Masney wrote:
> > Hi Conor,
> > 
> > On Wed, Sep 30, 2026 at 11:43:22PM +0100, Conor Dooley wrote:
> > > FYI clock folks,
> > > 
> > > On Wed, Sep 30, 2026 at 05:42:54AM -0700, Changhuang Liang wrote:
> > > > The JHB100 SoC includes CRG (Clock and Reset Generator) for multiple
> > > > subsystems:
> > > > 
> > > > The JHB100 SoC is divided into multiple subsystems, and basically
> > > > each subsystem includes a CRG(Clock and Reset Generator):
> > > >  - sys0crg/sys1crg/sys2crg/
> > > >  - per0crg/per1crg/per2crg/per3crg/
> > > >  - voutcrg
> > > >  - vcecrg
> > > >  - gpu0crg/gpu1crg
> > > >  - cpucrg
> > > >  - usbcrg
> > > >  - host0crg/host1crg
> > > >  - pcierpcrg
> > > >  - husb0crg/husb1crg
> > > >  - husbcmncrg
> > > >  - husbd0crg/husbd1crg
> > > >  - npucrg
> > > > 
> > > > In the current series, we will only add the following CRG:
> > > >  - sys0crg/sys1crg/sys2crg/
> > > >  - per0crg/per1crg/per2crg/per3crg/
> > > > 
> > > > The remaining CRG will be implemented in future series.
> > > > 
> > > > This series depends on the series:
> > > > https://lore.kernel.org/all/20260806122553.182449-1-changhuang.liang@starfivetech.com/
> > > > and it has been tested on the StarFive JHB100 EVB-1.
> > > 
> > > If this revision of the series is acceptable, I'd (although I'm not a
> > > listed driver maintainer) like to send you a PR as I've done in the past
> > > for Starfive stuff so that I can get some of these binding patches that
> > > contain headers as part of a shared tag to be able to unblock a bunch of
> > > the soc tree stuff. With conferences next week I understand that, with it
> > > being -rc5, it's probably this doesn't make v7.4 but I figured it was
> > > worth getting my intentions out there!
> > 
> > I am going through this series now, and I have a few minor changes to
> > the clk drivers themselves.
> > 
> > Feel free to send a pull for the bindings and headers though.
> 
> Okay, PR below.
> 
> I won't put this tag into my linux-next branch until the drivers are in
> the clock tree, but it'll let me get my ducks in a row, particularly
> beneficial given next week I'll be somewhat AFK! Duck alignment is
> currently ongoing in the "jhb100" branch in my repo..
> 
> Thanks Brian, Conor.
> 
> btw, will you be at LPC or OSSEU?

... As I went about aligning more ducks, I recalled that the syscon/pll
series also depends on some of the binding header files in this series.

I've made another tag with an additional binding that you'll need to
apply the clock patches in this series:
https://lore.kernel.org/all/20260828095608.19955-2-changhuang.liang@starfivetech.com/

This tag will actually appear in linux-next as of the next iteration,
because the socinfo driver I will definitely submit as 7.4 material.

Thanks,
Conor.

The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:

  Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ clk-starfive-jhb100-plus-soc-header

for you to fetch changes up to c4a545d3e428e9600d670fa8a08098b7bc82d5ec:

  dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules (2026-10-02 21:17:31 +0100)

----------------------------------------------------------------
jhb100 clock binding + syscon binding shared tag

This is a second shared tag for the Starfive jhb100 clock bindings, between
the riscv soc tree and clock tree.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

----------------------------------------------------------------
Changhuang Liang (8):
      dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator
      dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator
      dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules

 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml       |  70 ++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml       |  70 ++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml       |  76 ++++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml       |  76 ++++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml       |  63 +++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml       |  71 ++++++++++++++++++++++++++
 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml       |  64 +++++++++++++++++++++++
 Documentation/devicetree/bindings/soc/starfive/starfive,jhb100-syscon.yaml | 115 ++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/clock/starfive,jhb100-crg.h                            | 554 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dt-bindings/reset/starfive,jhb100-crg.h                            | 189 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 10 files changed, 1348 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per3crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys0crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys1crg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-sys2crg.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jhb100-syscon.yaml
 create mode 100644 include/dt-bindings/clock/starfive,jhb100-crg.h
 create mode 100644 include/dt-bindings/reset/starfive,jhb100-crg.h

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v5 00/23] Add basic clocks and resets for JHB100 SoC

[Brian Masney]

Hi Conor,

On Fri, Oct 02, 2026 at 09:26:34PM +0100, Conor Dooley wrote:
> > btw, will you be at LPC or OSSEU?

Yes, I'll be at LPC. I'm giving a clk talk the second day, so you can
find me there if we don't cross paths before then.

> ... As I went about aligning more ducks, I recalled that the syscon/pll
> series also depends on some of the binding header files in this series.
> 
> I've made another tag with an additional binding that you'll need to
> apply the clock patches in this series:
> https://lore.kernel.org/all/20260828095608.19955-2-changhuang.liang@starfivetech.com/
> 
> This tag will actually appear in linux-next as of the next iteration,
> because the socinfo driver I will definitely submit as 7.4 material.
> 
> Thanks,
> Conor.
> 
> The following changes since commit cee9395acd8043be0644b25c34bfa86623f2b935:
> 
>   Linux 7.3-rc1 (2026-08-30 13:34:40 -0700)
> 
> are available in the Git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ clk-starfive-jhb100-plus-soc-header
> 
> for you to fetch changes up to c4a545d3e428e9600d670fa8a08098b7bc82d5ec:
> 
>   dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules (2026-10-02 21:17:31 +0100)
> 
> ----------------------------------------------------------------
> jhb100 clock binding + syscon binding shared tag
> 
> This is a second shared tag for the Starfive jhb100 clock bindings, between
> the riscv soc tree and clock tree.
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> 
> ----------------------------------------------------------------
> Changhuang Liang (8):
>       dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator
>       dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator
>       dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator
>       dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator
>       dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator
>       dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator
>       dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator
>       dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules

Pulled into clk-next.

Brian